Construction of Slab Drain at Gangon Ugamani Approach Road at Ch. 1/600 Ta.Nakhatrana Dist.Kachchh under MMGSY Program Year 2025-26.

No. figures Amount

1 Providing flood gauge marks on sub structure as per design including 10.00 Rmt 167.04

painting as directed etc. complete.

2 Providing masonary steps with cement pointing on approaches as 34.00 Steps 230.51

3 Providing and laying filter media 600mm as directed at the back of 159.00 Smt 1239.36

abutments, returns and wing walls as per detailed specifications etc.

4 Providing and filling sand behind abutment & between returns in layers 139.00 Cum 504.43

as directed.

5 Excavation for foundation in hard murrum and boulders and very stiff 942.00 Cum 611.33

or sticky clays and other similar strata including sorting and strutting

and dewatering as necessary and disposing of excavated stuff as

6 Excavation in large boulders and soft rock by welding including sorting 734.00 Cum 701.53

strutting and dewatering as necessary and disposing off the excavated

stuff as directed.

7 Providing and filling in foundation with ordinary cement concrete M-15 84.00 Cum 3697.13

mix and providing necessary vertical pin headers including formwork,

vibrating, ramming and curing complete.

8 Diversion of water course, providing cofferdam and bund or island as 4.00 Each 30300.00

may be necessary for foundation and maintaining the same for the

period as may be necessary (B) Diversion by cofferdam / island.

9 Providing and fixing steel dowel bar of Fe-550D grade 32 mm dia. for 418.00 Cum 600.84

anchoring by drilling holes in foundation strata including, necessary

bending hooking of dowel bars and grouting the holes complete as per

detailed dawing and as directed.

10 Providing and laying weep holes in abutment and returns by using 159.00 Each 86.70

A.C. pipes of 100 mm. including laying in proper grade and jointing the

completed as per directed specification.

11 Providing and casting in situ controlled cement concrete M-20 for PCC 1280.17 Cum 5160.24

work in Abutment, Piers & Return wall as per drawing including

centering, shuttering, scaffolding where necessary laying, vibrating,

curing and finishing complete. (A) Height from 0.0 mt. to 5.0 mt.

12 Providing and casting in situ controlled cement concrete M-20 for PCC 136.30 Cum 5482.56

work in Abutment, Piers & Return wall as per drawing including

centering, shuttering, scaffolding where necessary laying, vibrating,

curing and finishing complete. (B) Height from 5.0 mt. to 10.0 mt.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

13 Providing and casting in situ controlled cement concrete M-25 mix for 55.00 Cum 5345.73

R.C.C. work in pier cap, abutment cap and dirt wall including

controlled cement concrete M-35 bed blocks or pedestals of required

size below bearings as per detailed drawings including centering,

shuttering, scaffolding wherever necessary laying, vibrating, curing

and finishing complete.

14 Providing & fixing in position tar paper bearings as per detailed design 2.00 Job 10100.00

and drawings and specifications etc. complete.

15 Providing and fixing in position Fe-550D steel dowel bars in pier caps 42.00 Each 455.63

or abutment caps for anchorage in fixed end as per detailed drawings

including cutting, bending and welding complete.

16 Providing and fixing in position Fe-550D steel dowel bars in pier caps 42.00 Each 533.60

or abutments caps for anchorage in free end as per detailed drawing

including cutting, bending and welding complete.

17 Providing and fixing in position I.S.I. mark High strength deformed bar 36.14 M.T. 83602.39

reinforcement of steel grade Fe-550D (FBEC-Fusion Bonded Epoxy

Coated) including cutting, bending, hooking, tying, welding etc,

complete as per detailed drawing and specification (A) Abutment cap

and dirt wall (B) Pier cap (C) Temp. reinforcement in PCC Pier,

Abutment, Return wall (A) Solid slab type super structure (A) R.C.C.

Approach slab (D) Wearing coat.

18 Providing and casting in situ controlled cement concrete M-30 for 281.00 Cum 5555.31

R.C.C.work in superstructure including centering, ramming, vibrating,

curing and finishing complete. (A) Solid slab type super structure.

19 Providing and casting in situ controlled cement concrete M-40 for 44.00 Cum 5656.35

average 100mm thick wearing coat laid as directed including tamping,

vibrating, finishing, curing and filling in joints with bitumen etc.

20 Provision of an Reinforced cement concrete crash barrier at the edges 114.00 Rmt. 1533.18

of the road, approaches to bridge structures and medians, constructed

with M-40 grade concrete with Fe-550D (HYSD) reinforcement

conforming to IRC:21 and dowel bars 25 mm dia, 450 mm long at

expansion joints filled with pre-moulded asphalt filler board, keyed to

the structure on which it is built and installed as per design given in the

enclosure to MOST circular No. RW/NH - 33022/1/94-DO III dated

June 1994 as per dimensions in the approved drawing and at

locations directed by the Engineer, all as specified)

21 Providing P.V.C. 100mm dia. water spouts including necessary iron 48.00 No. 159.37

grating as per detailed drawing including placing etc. complete.

22 Providing and fixing marble slab including engraving letters, numbers 2.00 No. 1012.65

and painting etc. complete. (A) size 75 cm x 60 cm x 4 cm.

23 Providing and casting in situ controlled cement concrete M-30 for 23.00 Cum 5355.92

approach slab including form work, curing and finishing etc. complete.

24 Providing pre-moulded asphalt filler joint as per drawings. (A) 12mm 54.00 Sq.m. 703.53

25 Dismentaling the existing structure including removing and stacking 35.00 Cum 930.36

the dismentelled materials as and where directed. (A) R.C.C. work.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

26 Earth work for embankment including breaking clods, dressing with all 1743.20 Cum 177.92

lead and lift including watering, rolling and consolidation of sub grade

in layer and consolidation of sub grade in layers at O.M.C. to required

dry density including filling the depressions which occur during the

process using vibratory roller 8 t to 10 t (C) from borrow area within

27 Clearing and grubbing of road land including uprooting trunk 1.10 Hect. 28455.10

vegetation, grass, bushes, shrubs, saplings and trees of girth up to

300 mm removal of stumps of trees cut earlier and disposal of

unserviceable materials and stacking of serviceable materials to be

used or auctioned upto a lead of 1000 meters including removal and

disposal of top organic soil not exceeding 150mm thickness (C) by

mechanical means in area of light jungle.

28 Construction of granular sub-base (GSB-V) 150 mm thick layer by 173.00 Cum 889.81

providing machine crushed B.T. material satisfying MORT&H

specification (Fifth revision) of Grading V including spreading in

uniform layer with motor grader on prepared surface, mixing by mix in

place method with rotavator at OMC and compacting with vibratory

roller to achieve the desired density etc. complete.

29 Providing and laying WBM of M.C Metal of size 45 mm to 90 mm size 124.00 Cum 1497.83

including 0.27 Cu.m stone screening & 0.08 Cu.m stone dust as filler

Including spreading, watering & consolidating by vibratory roller 80 Kn

to 100 Kn static weight 100 mm thick.

30 Providing and laying bituminous base course 37.5 mm thick 51.00 M.T. 2252.36

compacted with tack coat of VG-30 at the rate of 4.0 Kg./10Sqmt. and

using B.T. stone aggregates of required gradation and asphalt (VG-

30) grade for mixing @ 1.99 % by weight of total mix including heating

the aggregate and asphalt by drum mix plant and spreading the same

by paver finisher and consolidation with vibratory roller including

providing all materials, equipments, tools and plants, oil, kerosene, fire

wood, labour charges etc. complete.

31 Providing and laying 37.50 mm thick compacted B.M. in single layer 79.00 M.T. 2798.83

with B.T. aggregate as per MORT&H specification using VG-30 for

tack coat at 2.5 Kg./10Sq.mt. with mechanical sprayer and bitumen

grade VG-30 for mixing at the rate 34.0 Kg/M.T. i.e. 3.4% of total mix

including heating the aggregate and asphalt by drum mix plant and

spreading the same by paver finisher and consolidation with vibratory

roller including providing all materials, equipments, tools and plants,

oil, kerosene, fire wood, labour charges etc. complete

32 Providing and laying Bituminous Seal Coat with stone chips 6 to 10 27.00 M.T. 3167.74

mm size 0.18 cum/10 sqmt. i.e. using 0.66 cmt aggregate per M.T.

mix using asphalt VG-30 @ of 4.50 % of mix including heating the

asphalt and aggregate by continuous batching drum mix plant and

paver finisher and consolidating by vibratory roller including providing

equipment, tools, plant, firewood, oil, kerosene, labour charges etc.

using the contractor own machinery and plant.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

33 Road marking with hot applied thermoplastic paints with reflectorising 44.00 Sq.m. 367.73

glass beads on bitumen surface providing and laying a hot applied

thermoplastic compound 2.5 mm thick including reflectrorising glass

beads @250 gm per sqm area, thickness of 2.5 mm in excluding of

surface applied glass beds as per IRC:35-2015. The finished surface

to be level, uniform and free from streaks and holes zebra patta/bump

patta line/center line/cut patta. The white colour marking should

provide luminance coefficient on cement road shall be min

mcd/m^2/lux and Asphalt road shall be min 100 mcd/m^2/lux during

the service life during the day time .The marking should meet the

performance criteria for night time reflectivity and skid resistance as

mentioned in Section -15 of IRC 35-2015, warranty for retro reflectivity

shall be two years.

34 Cat Eye/ Road Stud/ RPM :- Supplying of moulded Twin shanks 44.00 No. 217.41

Raised pavement markers made of Polycarbonate and ABS moulded

body and reflective panels with micro prismatic lens (No Glass bead

added) capable of providing total internal reflection of the light entering

the distance and shall support a load of 13635 Kgs. tested in

accordance to ASTM-D 4380 Type H and complying to specifications

of Category - A of MORTH circular No. RW/NH/33023/10-97-DO in Dt.

11.06.1997. The height, width and length shall not exceed 20mm,

130mm and 130mm and width minimum reflective area of

Sq.cm on each side and slope to the base shall be 35 +/- 5 degrees.

The strength of detachment of the integrated cylindrical shaks (of

diameter not less than 19 +/- 2 mm) from the body is to be a minimum

valve of 500 kgf fixing will be by drilling holes on the road for the

shanks to go inside, without nails and using epoxy resin based

adhesive as per manufacture's recommendations and the colour of

the marker should be as per the IRC 35-2005 and as directed by

engineer in charge.

35 Direction sign (Junction board) :- Providing and fixing sign boards 1.00 No. 14831.71

made out of 2mm aluminium sheet size 244 x 122cms. rectangle as

per the design of IRC-67-1977 pre treated with phospheting process

& acid etching; coated with one coat of epoxy primer and two coats of

best quality epoxy paint; reflectorised with retro reflective sheeting as

per latest M.O.S.T. specifications, Letters and numerals should be as

per IRC-30-1968, 3.1m long (2 nos) stand post and frame fabricated

from suitable size iron angle of 50 x 50 x 5mm, 75 x 75 x 6mm as

required; painted with best quality epoxy coatings in black and white

bends. the details of symbol or inscription / numerals for each board

shall be as per the instruction of engineer in charge. The fixing at site

shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for each leg.

including excavation curing etc. complete under the supervision of

engineer in charge.(A) Engineer Grade (VR)

36 Cautionary Warning Sign :- Providing and fixing sign boards made out 2.00 No. 3808.66

of 2mm aluminium sheet; size 90 x 90 x 90 cms. equilateral triangle as

per design of IRC-67-1977. Pre treated with phospheting process &

acid etching; coated with one coat of epoxy primer and two coats of

best quality epoxy paint; reflectorised with retro reflective sheeting as

per latest M.O.S.T. Specifications; 3.1m long stand post and frame

fabricated from suitable size iron angle of 35 x 35 x 3mm, 75 x 75 x

6mm as required; painted with best quality epoxy coatings in black

and white bends. The details of symbol for each board shall be as per

the instruction of engineer in charge. The fixing at site shall be in 1:2:4

CC block of size 45 x 45 x 60 cms. for each leg including excavation,

curing etc. complete under the supervision of engineer in charge.(A)

Engineer Grade (VR)

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

37 Informatory Signs :- Providing and fixing sign boards made out of 1.00 No. 3856.90

2mm aluminium sheet size 80 x 60cms. rectangle as per the design of

IRC-67-1977 pre treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats of best quality

epoxy paint; reflectorised with retro reflective sheeting as per latest

M.O.S.T. Specifications; 3.1m long stand post and frame fabricated

from suitable size iron angle of 35 x 35 x 3mm, 75 x 75 x 6mm as

required, painted with best quality epoxy coatings in black and white

bends. The details of symbol for each board shall details of symbol for

each board shall be as per the instruction of engineer in charge. The

fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for

each leg including excavation curing etc. complete under the

supervision of engineer in charge. (A) Engineer grade (VR)

38 Hazard Marker Sign :- Providing and fixing sign boards made out of 1.00 No. 2423.74

2mm aluminium sheet size 90 x 30cms. rectangle as per the

design/drawing attached (IRC) pretreated with phospheting process &

acid etching; coated with one coat of epoxy primer and two coats of

best quality epoxy paint; reflectorised with retro reflective sheeting as

per latest M.O.S.T. specifications, 3.1m long stand post and frame

fabricated from suitable size iron angle of 35 x 35 x 3mm & 50 x 50 x

5mm painted with best quality epoxy coatings. The fixing at site shall

be in 1:2:4 CC block of size 45 x 45 x 60cms. for each leg including

excavation curing etc. complete under the supervision of engineer in

charge. (A) Engineer Grade (VR)

39 Providing and fixing Hectometer as per I.R.C. type design including 2.00 No. 356.50

painting, lettering etc. complete (ii) Fixing in C.C. 1:5:10.

40 Providing and fixing Guard stone as per I.R.C. type design including 8.00 No. 350.81

white washing etc. complete (ii) Fixing in C.C. 1:5:10

41 Excavation for foundation upto 1.50 mt. depth including sorting out 99.00 Cum 253.89

and stacking of useful material and disposing off the excavated stuff

within all lead and lift for Dense or hard soil.

42 Providing and laying rubble Gabion (each stone weight not less than 108.00 Cum 1083.82

40 Kg) including hand packing and filled in the interstices with quarry

43 Providing and Supplying of Mechanically Woven, Double Twisted, 108.00 Cum 1212.00

Hexagonal wire mesh Zinc+ PVC Coated Gabion boxes, Mesh

opening Type : 10 x 12, Wire dia: 2.7/3.7 mm, Selvedge wire dia:

44 Providing, supplying and installation of 200 GSM Non Woven 153.60 Sq.m. 45.45

Geotextile needle punched, polypropylene material having minimum

roll size of 5 mt. x 100 mt. including all labours etc. complete.

45 Providing and laying rubble pitching of 22.50 cm. thick with filling the 395.00 Sq.m. 617.84

sand in the interstices & C.C. 1:3:6 panelling at 3.0 mt. C/C and

cms. x 30 cms. panel wall as per the detailed drawing with necessary

excavation and providing water chutes of C.C. 1:3:6 at 24.00 mt. C/C

providing pointing on rubble pitching in C.M. 1:3 etc. complete.

46 Providing Designing Supplying and Installation of extruded Bi-Axial 630.00 Sq.m. 111.10

Polypropylene 30 kn GeoGrid including all labours & etc. complete.

47 Providing Designing Supplying and Installation of extruded Bi-Axial 378.00 Sq.m. 141.40

Polypropylene 40 kn GeoGrid including all labours & etc. complete.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

48 Supplying and fixing reinforced concrete heavy duty non-pressure 30.00 Rmt. 5530.95

pipes with collars for culvert carrying heavy traffic as per IS: 458-1991

spcifications including setting the pipes in C:M 1:2 watering and laying

(to leval or slopes) of class NP3 of following internal diameters

Total Rs.

i.e. Rs. One Crore, Sixty Nine Lacs, Fifty Six Thousand, Seven hundred Sixty Eight and Fifty Three paisa only

I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

Net Rs. ___________________________ Total Rs. ________________________

In words ____________________ In words ____________________

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge

for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017

Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per

actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at the

rate of input rate mentioned in all the tender.

5. Credit for dismantalled materials of amount of Rs. 1,60,467.62 must be recovered from 1st R.A. bill of Contractor's.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and found

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

Panchayat (R & B) Sub Division, Panchayat (R & B) Division, Panchayat (R & B) Division,

Nakhatrana Bhuj-Kachchh Bhuj-Kachchh