Construction of RPF Dog Kennel at NJP.

Item Breakup - A-DSR

prepare the surface even and smooth complete. 13.37S INTERIOR FINISHING Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 13.41 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : 13.41.1 New work (two or more coats) over and Sqm 600 185.65 111390 including water thinnable priming coat with 49 cement primer having VOC content less than 50 gram/litre 13.44S EXTERIOR FINISHING Finishing walls with Acrylic Smooth exterior 13.46 paint of required shade : 13.46.1 New work (Two or more coat applied @ 1.67 Sqm 260 160.6 41756 50 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) Finishing with Deluxe Multi surface paint system 13.48 for interiors and exteriors using Primer as per manufacturers specifications : 13.48.2 Painting wood work with Deluxe Multi Surface Sqm 2 176.25 352.5 Paint of required shade. Two or more coat 51 applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture Painting with synthetic enamel paint of 13.61 approved brand and manufacture to give an even shade : 52 13.61.1 Two or more coats on new work Sqm 15 155.9 2338.5 17.0 SANITARY INSTALLATIONS 17.1S General Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with 17.1 manually controlled device (handle lever) conforming to IS : 7231,with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 17.1.1 White Vitreous china Orissa pattern W.C. pan of Each 1 6767.4 6767.4 53 size 580x440 mm with integral type foot rests Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm 17.7 C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.3 White Vitreous China Wash basin size 550x400 Each 1 2301.75 2301.75 54 mm with a pair of 15 mm C.P. brass pillar taps KATIHAR DIVISION-ENGINEERING/N F RLY Providing and fixing P.V.C. waste pipe for sink or 17.28 wash basin including P.V.C. waste fittings complete. 17.28.1 Semi rigid pipe 55 17.28.1.1 32 mm dia Each 1 103.9 103.9 17.31 Providing and fixing 600x450 mm bevelled edge Each 1 1607.95 1607.95 mirror of superior glass (of approved quality) 56 complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 17.33 Providing and fixing 600x120x5 mm glass shelf Each 1 1083.5 1083.5 with edges round off, supported on anodised 57 aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. 17.35 Providing and fixing soil, waste and vent pipes : 17.35.1 100 mm dia 58 17.35.1.1 Sand cast iron S&S pipe as per IS: 1729 Metre 5 1151.9 5759.5 17.35.2 75 mm diameter : 59 17.35.2.1 Sand cast iron S&S pipe as per IS: 1729 Metre 8 1044.75 8358 Providing and fixing bend of required degree 17.38 with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 17.38.1 100 mm dia 60 17.38.1.1 Sand cast iron S&S as per IS - 1729 Each 1 598.5 598.5 Providing and fixing double unequal junction of required degree with access door, insertion 17.45 rubber washer 3 mm thick, bolts and nuts complete: 17.45.1 100x100x75x75 mm 61 17.45.1.1 Sand cast iron S&S as per IS - 1729 Each 2 1153.3 2306.6 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP 17.73 brass screws with concealed fittings arrangement of approved quality and colour. 17.73.2 600 mm long towel rail with total length of 645 Each 1 708.95 708.95 62 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. 17.74 Providing and fixing PTMT shelf 440 mm long, Each 1 713.2 713.2 124 mm width and 36 mm height of approved 63 quality and colour, weighing not less than 300 gms. 18.0 WATER SUPPLY 18.4S PP-R PIPES Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass 18.4 threaded polypropylene random fittings and fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-Charge. ( Internal Exposed on walls ) 64 18.4.1 PN - 16 Pipe, 20mm OD (SDR-7.4) Metre 5 272 1360 65 18.4.2 PN - 16 Pipe, 25mm OD (SDR-7.4) Metre 4 318.35 1273.4 KATIHAR DIVISION-ENGINEERING/N F RLY Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings and 18.5 fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 66 18.5.1 PN - 16 Pipe, 20mm OD (SDR-7.4) Metre 5 477.85 2389.25 67 18.5.2 PN - 16 Pipe, 25mm OD (SDR-7.4) Metre 10 515.2 5152 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold 18.6 water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge. External work 68 18.6.4 PN - 16 Pipe, 40 mm OD (SDR-7.4) Metre 25 415.1 10377.5 18.15S BRASS FITTINGS Providing and fixing gun metal gate valve with 18.17 C.I. wheel of approved quality (screwed end) : 69 18.17.1 25 mm nominal bore Each 1 622.4 622.4 70 18.17.3 40 mm nominal bore Each 1 826.1 826.1 Providing and fixing ball valve (brass) of 18.18 approved quality, High or low pressure, with plastic floats complete : 71 18.18.3 25 mm nominal bore Each 1 464.05 464.05 Providing and fixing gun metal non- return valve 18.19 of approved quality (screwed end) : 18.19.1 25 mm nominal bore 72 18.19.1.1 Horizontal Each 1 591.4 591.4 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES 18.48 Providing and placing on terrace (at all floor Per 1000 11 11000 levels) polyethylene water storage tank, IS : Litre 12701 marked, with cover and suitable locking 73 arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.49S C.P. BRASS FITTINGS Providing and fixing C.P. brass bib cock of 18.49 approved quality conforming to IS:8931 : 74 18.49.1 15 mm nominal bore Each 1 506.8 506.8 Providing and fixing C.P. brass long nose bib 18.50 cock of approved quality conforming to IS standards and weighing not less than 810 gms. 75 18.50.1 15 mm nominal bore Each 1 820.7 820.7 Providing and fixing C.P. brass stop cock 18.52 (concealed) of standard design and of approved make conforming to IS:8931. 76 18.52.1 15 mm nominal bore Each 1 670.45 670.45 18.59S AIR VALVE & WATER METER (BULK TYPE) 18.65 Providing and fixing PTMT soap Dish Holder Each 1 111.45 111.45 having length of 138mm, breadth 102mm, 77 height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. 21.0 ALUMINIUM WORK 21.1S General KATIHAR DIVISION-ENGINEERING/N F RLY Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with 21.1 required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever 21.1.2 required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.1 Anodised aluminium (anodised transparent or Kg 35 598.6 20951 78 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. 21.3 complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.2 With float glass panes of 5 mm thickness Sqm 9 1505.25 13547.25 79 (weight not less than 12.50 kg/sqm) Total 4804158.66