Item rate contract for microbiology lab setup of water quality testing laboratories anywhere in Uttarakhand State.

Rates for Microbiology Lab Setup of Water Quality Testing laboratories anywhere in Uttarakhand state.

Electrical Panel: Supply, Installation, testing and commissioning of Dust and vermin proof indoor type factory built sheet steel enclosed modular construction floor/ wall mounted control panel for AHU Outdoor unit, suitable for operation on 415±10% volts, 50 Hz AC 3 phase 4 wire system fabricated out of suitable sized square tubular section and covered with CRCA sheet steel of 2mm thick for frame work and covers etc preferably CPRI certified manufacturer. The panel comprising of Incomer MCCB/MCB, Outgoing MCB, , manual operational facility, internal wiring, On Off Indication Lamp, Microprocessor based electrical panel as required and necessary electrical work.

LED lighting fixture Supplying and fixing of Ceiling mounting flush type square LED (size600mm x 600mm panel) lighting fixture suitable for clean room operation.

Validation: Laboratory Validation as per ISO requirements for lab establishment.

Modular 80mm Wall panels: Supply, Installation, testing, commissioning of Double Skin Clean Room Wall panels 80 mm thick, made of 0.6 mm thick Galvanized Iron sheet as per IS 277 with 60–70-micron thick powder coating, in-filled with PUF. The density of itis 38-40 Kg. /m³; with all required accessories like C Type Floor Track, Top Channels, male female channel etc.

40mm Wall Panels (Both Side PCGI) : Solid Double Skin Clean Room Ceiling panels made up of 0.7 mm thick Powder Coated (60-80 microns) Galvanized Iron sheet (hot dipped with zinc coating of 120 gsm) on both sides with Infill material as PUF(Density 40 kg/m3) with accessories like male female channel including Hanging arrangement (Upto 2m ht. ) like Trusses and Suspenders.

Modular Ceiling panels: Supply, Installation, testing, commissioning of Double Skin Clean Room Wall panels 50 mm thick, made of 0.6 mm thick Galvanized Iron sheet as per IS 277 with 60–70-micron thick powder coating, infilled with PUF. The density of it is 38-40 Kg. /m³; with all required accessories like T grid, suspension rod, nut boltetc.

Coving: Supply, Installation, testing, commissioning Aluminium Coving R-75 with Aluminum Backing (Powder Coated) with 2D and 3D Corners as applicable as per the site requirements.

Return Air Riser Providing & fixing GI return air riser inside 60 mm thick wall panels. RA duct willextend 150 mm above ceiling with a flanged connection to main Duct by others.Riser will be provided with SS 304 1.2mm thick Perforated Grill.Solid Area will be considered in wall panel area.

Return air risers S.S GRILL WITH 10 MIC. FILTER Return air risers S.S Grill with 10 MIC. FILTER s.s perforated screen, VCD size: -600 x 300 mm /450x300 mm

Clean Room Door/Air Lock: Supply, Installation, testing, commissioning of Single Leaf clean room door 900 x 2100 mm 30min. Fire Rating made up of 1.2 mm thick GI sheet, with PUF as infill material with Polyester Powder Coated finish with Hardware as mentioned below, with vision glass and accessories like SS ball bearing Hinges (Geze make) (101x75x3mm), SS One side D Handle another side Push Plate/ Back-to-back handle (19*300) mm (Altos/Geze Make), Dead lock Both Side Key operation (Altos/Geze Make), double Clear Glazed 6mm Glass 400 x 600 mm (Toughened Glass), Door Closer TS 71 STD ARM (Dorma Make) , Automatic Drop Seal (Altos make), Door Seal Grooved Type (Syn Std.), Door Stopper (Altos/Geze make), SS304 Kick Plate One side (300 mm Height) 0.8 mm thk, Flush Bolt for Double Leaf Door, Panic bar 378, 1 point locking device with external trim. (a)Single leaf Door Size: 900 x 2100

Double glazed Vision Panel: Double Glaze Vision panel with 2 x 6 mm thick Clear Toughened glass with 20mm black border with all accessories like double adhesive tape, silicon sealant and silica gel with GI powder coated inner channel (Max. Jamb 80mm) View Panel Size 900*900mm

Epoxy flooring: Supply and erection of the floor should be made of PVC or equivalent with seamless joints placed on top of the existing flooring pasted with suitable adhesive.

Hepa Filter With Housing, Supply, Installation, testing and commissioning of Ceiling mounted CRCA powder coated terminal HEPA module with HEPA Filter, gaskets, 1.2 mm thick Stainless steelperforated sheet and volume control damper. The provision for DOP/ PAO testing port shall be provided. Efficiency: 99.95% down to 0.05 μ, All necessary fixtures to secure the modules in false ceiling shall be part of the scope. size:- 450 x 450 x 305 mm-3 nos

S.S. 304 perforated sheet: Supply and installation of s.s 304 perforated sheet with 70% perforation capsule cutting in heavy gauge

HEPA filters: Supply and installation of HEPA Filter of capacity down to 0.3 micron with 99.97% efficiency.size: - 450 x 450 x 305/150 mm

GSS Ducting: Supply, Installation, testing and commissioning of Site fabricated GSS ducting with zinc coating of 120 GSM total on both sides as per IS 277 complete with MS supports as per site requirements, IS standards. The scope shall include turning vanes, bolts and nuts, gaskets, stiffeners, flanges/Transverse Duct connectors. All Ducting joints shall to be sealed with Sealant including Fire Damper and Damper as applicable. Should be in 22-24 gauge respectively

Thermal Insulation: Supply, Installation, testing and commissioning of 9 mm thick Closed cell Cross linked Polyethylene Foam (XLPE)/ Nitrile rubber Insulation pasted with suitable adhesive. 19mm

Air Handling Unit (AHU) : Supply, Installation, testing and commissioning of Floor Mounted factory fabricated Double skin Air Handling Unit (re-circulation Type) madeout of 0.6mm thick pre- coated GI outer skin and not less than 0.6mm thick Plain GI inner skin with PUF insulated panel (not less than 40kg/m3) with Aluminium profile, comprising of blower section with backward curved fan with IE-2 Motor Vibration isolators, mixing chamber,10 Microns Pre filters (G4) 5 Micron Fine-Filters (F7),4/6 rows deep DX cooling copper coil with Aluminium fins Sandwich insulated Condensate drain pan shall be fabricated from minimum 18G stainless steel sheet (SS 304),AHU shall be mounted on anti- vibration arrangement. Capacity : 3000 CFM, Static Pressure : 125 mm

Outdoor unit : Supply, Installation, testing and commissioning of Variable Refrigerant Flow type Outdoor unit with energy efficient Compressor, Copper condenser with anti- corrosive coating, condenser fan with motor,Filter Dryer, Expansion valve, refrigerant gas charging etc. The system will be suitable for 415V+/- 10%, 3 Ph operation. Refrigerant R407C/R410A. Capacity : 3 TR/3000CFM-1 nos. 800CFM 1 Nos. Make: BlueStar/OGeneral/Mitsubishi Heavy Industries/Voltas/Avantec or equivalent

Refrigerant Piping: Supply & Layout of Copper refrigerant piping seamless tube (IS: 10773 / ASTM B280 /B88) with proper insulation using 13 mm thick closed cell polyethylene insulation with Aluminium foil between condensing units and AHUs including cutting, brazing, support and fixture etc. required for installation of liquid suction line.

Drain Piping : Supply & Layout of PVC 40 mm pipeline for condensate drainage water piping from the AHU to the nearest drain point.

Magnehelic gauge : Supply, Installation, testing and commissioning of Magnehelic gauge including the fitting and piping.

Civil work inclusive of foundation for AHU and Outdoor units, drilling and cutting of holes through the core cutting machine wherever required etc. and other necessary work are in the scope of the supplier.

Stainless steel Dress cabinet with shoe rack, Dress Cabinet Size: 1200mm x 450mm x 900mm Shoe Cabinet: 900mm x 600mm x 300mm (with 6 shoe boxes compartments)

Modular workbench in GI sheet metal 0.9mm Epoxy powder coated wall side work bench U-Shape with 750/600mm modules, LS with fittings and accessories including black granite top including the C-frames, Connecting sets, sliding accessories. Size 2700mm x 880mm x 750mm

Modular workbench in GI sheet metal 0.9mm Epoxy powder coated wall side work bench U-Shape with 750/600mm modules, LS with fittings and accessories including black granite top including the C-frames, Connecting sets, sliding accessories. Size 2250mm x 880mm x 750mm

Modular workbench in GI sheet metal 0.9mm Epoxy powder coated wall side work bench U-Shape with 750/600mm modules, LS with fittings and accessories including black granite top including the C-frames, Connecting sets, sliding accessories with Sink Uint- Size 2550mm x 880mm x 750mm

Dynamic Pass Box LED tube light Air system Motor-blower with suspension arrangement Filters Pre filter (95% down to 5 micron) HEPA filter (99.97%) Protected by SS grills Door Two side doors Glass window SS handles & SS hinges Electromagnetic Interlocking system Standard Fittings UV light Light indicators for door SS Handles & SS hinges On / Off Switch for blower Warranty of the products from the date of Installation.

Anti-Vibrating Table for weighing Balance 600 to 650 mm * 600 to 650mm

Safety Cabinet: explosion proof cabinet as per EN norms Red: combustible Liquids 5-gallon Capacity, Qty 01 no Yellow: Flammable Liquid 5-gallon Capacity, Qty 01 no Blue: Corrosive liquid : 5 gallon Capacity, Qty 01 no

Dismantling work for brick, slab, aluminum sheets etc.

ADVENT TECHNOLOGIES

BIOSTORE GLOBAL SOLUTIONS