Major Repairs of DRR 761 W

Complete overhauling of the engine by way of removing the Engine foundation bolts and extracting the engine by crane. Dismantling the engine and removing the damaged/ worn out parts. P/f of cylinder lining-4Nos., Piston assembly along with piston rings-4Nos. P/f of big end and small end bearings to the connecting rod, gudgeon pin-4Nos., connecting rod bolts along with nut 08 Nos. P/f of crank bearing, head gasket along with complete gasket set. P/f of timing gear set along with oil seal. P/f of inlet and outlet valves along with valve guide 08Nos. P/f of circlip-1set, exhaust valve 4Nos. along with springs. P/f of cam shaft bush and cam shaft bearing, rocker arm. P/f of fly wheel ring, complete water body assembly. The job also includes grinding of crank shaft to the required size, fitment of new cylinder liner, setting of crank shaft for free rotation , line boring of cylinder block& fitting of cylinder lining, grinding of cam shaft bush ,fitment of cam shaft, grinding of valve & valve seat to match each other, fitment of valve guides , facing of cylinder head, fitment of small end bush to connecting rod, P/f of oil filter-1 no., fuel filter set-1no., high pressure injector pipe-4 nos., fuel pipe main (fuel tank to feed pump)-01no.,fuel pipe main (feed pump to filter)-01no.,fuel pipe( filter to FIP pump) -01no., fuel pipe return (FIP to fuel tank)-01no.,pipe oil pressure -01no.,oil pressure gauge -01no., water temp. gauge-1 no., fan belt-1 no. Complete assembling of the engine with new parts, testing it and mounting on the machine. P/f of engine sump studs-12Nos.The job includes cost of material and labour charges .

Complete repair/calibration of F.I.P by way of removal of defective F.I.P from engine, cleaning with petrol and removing the damaged parts P/F plunger head-1No., plungers-4Nos., delivery valves, with elements, FIP coupling along with cross with spacer, governor shaft, nozzles, calibration of nozzle injector with pump. P/F of pump cam shaft, adapter fuel injection pump, gear, non-return valve, feed pump set -01no, calibration & tuning of FIP, Job includes cost of material and labour charges & calibration and tuning of FIP with engine.

Repair to Radiator by removing the radiator from the machine. Removing by way of heating the solders of upper and lower reservoirs. Removing by way of gas cutter 4No. of blocked tube and replacing with new tubes by way of soldering. Plugging the leakage at 4 points on the core of radiator. Cleaning the core by way of using of caustic soda and flushing out with water. Soldering the upper and lower reservoirs and fitting on the machine. P/f of new upper & lower hose pipes with clamps. P/f of radiator foundation bolts and radiator cap complete job.

Complete overhauling of the gear box and speed shaft. Removing the damaged/ worn out parts. P/f of coupling shaft-1No. along with ball bearing, bearing housing and reverse bevel pinion along with ball bearing. P/f of 2nd speed pinion, speed wheel (slow)-1No. and speed wheel (fast)-1No. P/f of bushes, speed pin, washer, end washer. Providing of bushes 2No.by way of grinding and fitting to size. P/f of gasket set. Complete job including cost of material and labour charges.

Repair to self starter by dismantling it completely, cleaning with petrol, inspection of parts and then replacement of damaged/worn out parts by P/F of set of field coil, carbon brush set-01no., new armature, solenoid switch with bendex drive-01no., p/f of bearing along with long bolts, p/f of carbon bush moving plate assembling and testing. The job includes cost of material, labour charges and taxes

Repair to the differential shaft of the machine by way of dismantling from the machine cleaning with diesel and then p/f of damaged parts like bushes -4Nos. by way of turning and fitting, bevel wheel-1No., bevel wheel with holes-1 No., Shaft-1No., bearing housing-1No., Bolt-12nos., castle Nut-8nos., union-2Nos., assembling and testing. The job includes cost of material and labour charges.

Repair to clutch (forward and reverse) of the machine by dismantling the system and removing the damaged/worn out parts. P/f of clutch plate driven (in 3 segments) 1No. each(forward and reverse). P/f of plate hub & back assy. 01no., cotter pin, link lever-10Nos., P/f of pin for lever adjusting-2Nos.The job includes cost of material ,labour charges and taxes

Repair to steering gear assembly by dismantling it completely ,cleaning, inspection of parts and replacement of damaged /worn out parts by p/f of shaft fork -01no.,bracket for quadrant -01no., bearing -01no.,key -02nos., worm wheel -01no.,bevel wheel -01no., bevel pinion -01no.,bush -01no., bush-01no.,bush -01no.,stud -6nos.,thrust bearing -1no.,grease tube -03nos bolt -12nos., nuts -12nos.,gasket set-01no., universal ball joint and testing .The job includes cost of material &labour charges and taxes.

Repair to front rolls and axle by dismantling from the machine completely, checking of parts removing of damaged /worn out parts and then P/F of front axle along with bushes-04nos., mud ring -01no., cover plate-2Nos., grease nipple-2Nos., P/f of bolts 12 Nos. complete job. The job includes cost of material and ,labour charges

Repair to rear rolls by dismantling from the machine completely checking of parts ,removing of damaged /worn out parts then P/F of bush inner -02 nos., bush outer -02nos.,peg -01no.,dust cover -02nos.,gear driven 1no., thrust washer -02nos.,pin dowel -04nos.,lock plate -02nos., MC bolt -10nos.,nut -10nos., cover -02 nos . ,gasket -02nos.,grease nipple -02 nos., pacer washer -12nos. in place of damaged/worn out parts after re-metaling of the axle and turning it to the required size & shape. The job includes cost of material ,labour charges and taxes