5/2021-22

Amount

Schedule of Quantity( 22 KV H T line) Ann-A

ST Pole 9 Mtr. Long W/L 200 Kg

RCC Muff 2000mm/ muffs with concerete filling.

ACSR.6/1/4.09mm (to be supplied by HPSEBL)

Cross Arm C.I. (100X50x5mm) *1800mm

MS A.I. knee bracing set 2x(850x50x50x5)mm.

X-Arm AI (2700x50x50x6mm+1500x50x50x6mm)

Pin Insulator With Pin Hellically Formed Fitting.(22 KV)

Disc Insulator Set (Comprising 2nos Disc)Porcelain BS-12kV,90KN including Dead end clamp etc.

Dead end clamp for 90KN Disc insulator

Cross Arm C.I. (100X50x5mm) *2800mm in Meter(6 No)

H.T. Stay Set Complete Including Guy Assembly Hellycally Fitting.

Stay Wire 7/3.15 mm (@6.0 Kg Per Stay Set)

H.T. Earthing Set Complete Including

Earth hook for Earth Wire clamp

Danger Plate (250X200X1.6mm)

M.S. Nuts and Bolts (Off Sizes)

Barbed Wire

Aluminium Paint

Pole clamp(MS Flat 50x6mm)

Schedule of Quantity( 22 KV H T line with cable) Ann-B

Providing Steel Tubular Poles (9 m, Working Load > 200 kgf/m²)

Providing Muffs with concerete filling

Providing X-Arm: [Channel Iron (100x50x5 mm), Length : 750 mm 4Nos

Providing AI. Knee bracing set {2X(850X50X50)mm} 9 No.

XLPE(22 kV,3 x 95mm²) x2Nos (to be supplied by HPSEBL)

Providing Prov.22KV End Termination KIT (3 x 120 mm²)

Providing Facade Hooks for HT

Providing Pipe Earthing

Providing HT Stay Set

Providing Stay Wire (7/3.15 mm) (6.0 kg Per Stay Set)

Providing Top Clamp

Providing Earth wire clamp

Providing Suspention Clamp (Aluminium Alloy)/Suspension Assembly

Providing Cable clamp (galvenzed) & Anchoring Assembly

Providing Full Clamp

Providing Barberd Wire

Providing Half Clamp (M.S. Flat 50x5 mm)

Providing Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm Φ or more (with flat and spring washers)]

Providing Danger Plate

Providing Aluminium Paint

Schedule ofQuantity( 2x400 KV DTR) Ann-C

Distribution Transformer (Outdoor Type) , 22/0.4 kV, 2x400 KVA(Provided by HPSEBL)

Metering system C.I ( 2800 x 100 x 50 ) mm for X-arm base main channel of C.T P.T unit=4no

C.I (460 X 100 X 50 ) for supporting main channel of C.T.P.T

C.T & P.T Belting i) Angle for (2800 X 50 X 50 )mm

ii) Angle for ( 460 x 35 x 35 ) mm

Full Clamp (M.S. Flat 50x5 mm)

Control Cable 2.5mm2

MS Angle Iron (50X50x5 mm), Length : 2800 mm x 2 Nos for Trivector

22 KV C.T P.T Unit 50/5 amp (to be provided by HPSEBL)

Prov. "Energy meter for HT metering 50/5Amp with Meter Box water proof

Steel Tubular Poles (10 m, Working Load > 200 kgf/m²)

Muffs with concerete filling

X-Arm: [Channel Iron (100x50x5 mm), Length : 2800 mm x 2 Nos

X-Arm: [Channel Iron (75x40x5 mm), Length : 2800 mm x 4 Nos] for supporting DO fuse unit & GO switch

MS Angle Iron (50X50x5 mm), Length : 2800 mm x Nos for LA's

G.O Switch Unit (22kV, 400A, 25 kA )

D.O Fuse Unit

Surge Arrester, 18 kV Station Class (Porcelain Type)

Stay set complete

Stay Wire (7/3.15 mm) (6.0 kg Per Stay Set)

Pipe Earthing Set

Half Clamp (M.S. Flat 50x5 mm)

Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16mm Φ or more (with flat and spring washers)]

" Barbed Wire

Aluminium Thimble

Aluminium Thimble

Lead-Tin Solder (60:40)

Solder Flux

Danger Plate

Pin Insulator with Pin 22KV

Aluminium Paint

Cable PVC (1.1KV,3.5core) 500mm sqr

LT Distuirbution Panal Box for 400 KVA DTR with ACB (630 Amp., 50 KA, 4P, 1 No.) & SFU (100 Amp) 6 Nos. rewireable

ABSTRACT OF COST (400 KVA SUB-STATION Bedx2) for 2nd Stage stage Ann-D

Excavation in foundations, trenches etc., in earth work, lift upto 1.50 Metres stacking the eacavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15cm. layers, when required in to plinths sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20 metres.

Providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form workin: Foundation and plinth

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in vertical surfaces.

Providing and laying cement concrete 1:5;10 (1cement :5sand :10 graded stone aggregate 40mm. nominal size) with 15 % plum and curing complete excluding cost of form work in retaining walls/ Breast walls, the size of plums shall usually be 150mm. to 300mm. as per H.P.P.W.D.Specification.

15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. Cement Mortar 1:6 (1Cement:6 Sand).

Steel work in single sections including cutting,hoisting,fixing in position and applying a priming coat of red lead paint In R.S.Joists,channels angles,tee

Supplying and fixing wovenplains G.I. wire fencing of mesh 50mm to 150mm to any type of standard rails, strainging bolts. etc. including provision of binding wire, staples etc.

Providing and fixing heavy duty hinges and locking arrangment of M.S. ,sliding bolts on both sides to gate.

Painting the fencing and vertical post etc after applying one coat of red lead primer and then 2 coats of Alluminium paint

Supply & spreading broken/crushed stone agg. Chipping of hard stone of the following nominal size free of disintegrated pieces of delefarious & organic material 20 to 25 size.

Antibeed treatment of yard

MS. Prem Enterprises