Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.3 LAccepted-Finance H NO 05 AASI BAUG OPP VATSALYA SCHOOL BHUJ KUTCH 370001 | BHUJ | KUTCH | GUJARAT | 370001 | ₹41.3 L | L1 | Accepted-Finance Being Lowest |
| 2 | L2₹45.0 L+₹3.7 L (8.88%)Rejected-Finance WANIAWAD BHUJ KUTCH 370001 | BHUJ | KUTCH | GUJARAT | 370001 | ₹45.0 L+₹3.7 L (8.88%) | L2 | Rejected-Finance not being lowest |
| 3 | Rejected-Technical | - | - | Rejected-Technical REJECTED |
| Sl No | Description | Qty | Unit | M/s Bombay Novelty Stores L2 | Ahmed B Khatri L1 |
|---|---|---|---|---|---|
| 1.00 | Disconnecting the water mains from the delivery line of submersible motor and pumping sets,including disconnecting electric connections, lifting & taking out HDPE/GI/UPVC column pipes 80/100/110 mm dia bore, submersible cable and defective submersible pumping set with connected cage,seperating pump and motor for repair purpose,etc. for necessary repairs (Repairs to be measured and paid for separately under respective items here in after) ,re-assembling pump and motor after repairslowering of repaired / replaced HDPE/GI/UPVC column pipes 80/100/110mm dia bore, submersible cable, submersible pumping sets complete in bore well, jointing of submersible cable, reconnecting delivery line to water mains, testing for satisfactory running and continuous flow of water complete all as specified and directed by Engineer-in-Charge. | 36 | EACH JOB | 5,000 ₹1,80,000 Lowest | 5,000 ₹1,80,000 Lowest |
| 2.00 | Material & labour for unserviceable MS nuts, bolts and washers of any size & length as required at site and as directed for hold fastening column pipes/centrifugal pump and motor set complete all as specified and directed by Engineer-in-Charge. | 50 | KILOGRAM | 100 ₹5,000 Lowest | 100 ₹5,000 Lowest |
| 3.00 | Transporting defective submersible motor of any make and capacity of 30 HP to workshop, material & labour for dismantling motor, taking out burnt copper winding of stator,cleaning the casing and stator with wire brush and cleaning the surface, rewinding the motor using super enameled insulated copper winding wire of existing gauge, insulating & drying , complete re-assembling the motor to its original form after replacement of defective parts and testing for satisfactory run, bringing back to site of work complete all as specified and directed by Engineer-in-Charge.
Note :(i) Supply & fix in replacement of defective parts and remetaling, turning & polishing of motor shaft shall be measured and paid separately under respective items her in after.
(ii) Rate quoted by the tenderer is deemed to include the cost for replacement of minor parts like nuts, bolts, washers, etc | 4 | EACH JOB | 22,500 ₹90,000 Lowest | 24,000 ₹96,000 |
| 4.00 | All as per item no 3 here in above but for 40 HP motor | 4 | EACH JOB | 27,500 ₹1,10,000 | 26,000 ₹1,04,000 Lowest |
| 5.00 | All as per item no 3 here in above but for 50 HP motor | 4 | EACH JOB | 32,500 ₹1,30,000 | 28,000 ₹1,12,000 Lowest |
| 6.00 | Material & labour for remetalling turning & polishing of motor shaft including lathe work of submersible motor of capacity 30 to 50 HP complete all as specified and directed by Engineer-in-Charge. | 8 | EACH JOB | 800 ₹6,400 Lowest | 1,500 ₹12,000 |
| 7.00Supply only in replacement of following defective parts of submersible motor of capacity 30 to 50 HP complete all as specified and directed by Engineer-in-Charge. Note - (i) The original parts as provided by the manufacturer only be used in the work. (ii) The work is to be carried out on the motors dismantled under item No 3, 4 & 5 above) : - | |||||
| 7.01 | Bearing bush gun metal | 10 | EACH | 800 ₹8,000 | 700 ₹7,000 Lowest |
| 7.02 | SS Sleeve for shaft | 10 | EACH | 300 ₹3,000 Lowest | 500 ₹5,000 |
| 7.03 | Oil Seal. | 10 | EACH | 150 ₹1,500 | 100 ₹1,000 Lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
9 Jul 2026, 5:00 pmClosed
GE (AF) BHUJ
GE (AF) BHUJ ,KHAVDA ROAD, BHUJ GUJARAT-370001
REPAIRS/MAINTENANCE OF SUBMERSIBLE PUMP SETS AND CENTRIFUGAL PUMP SETS INCLUDING PANELS, STARTER AND OTHER MISC CONNECTED ITEMS AT AF STN BHUJ
2026_MES_772112_1
8617/V/E8
Open Tender
Civil Works
Item Rate
270 days
GE (AF) BHUJ, KHAVDA ROAD, BHUJ GUJARAT-370001
As per Tender Document
8 documents required · 8 mandatory
₹500
GE (AF) BHUJ
₹90,000
Yes
16 Sept 2026
13 Jun 2026
11 Jul 2026
13 Jun 2026
9 Jul 2026
27 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Disconnecting the water mains from the delivery line of submersible motor and pumping sets,including disconnecting electric connections, lifting & taking out HDPE/GI/UPVC column pipes 80/100/110 mm dia bore, submersible cable and defective submersible pumping set with connected cage,seperating pump and motor for repair purpose,etc. for necessary repairs (Repairs to be measured and paid for separately under respective items here in after) ,re-assembling pump and motor after repairslowering of repaired / replaced HDPE/GI/UPVC column pipes 80/100/110mm dia bore, submersible cable, submersible pumping sets complete in bore well, jointing of submersible cable, reconnecting delivery line to water mains, testing for satisfactory running and continuous flow of water complete all as specified and directed by Engineer-in-Charge. | 36 | EACH JOB | - | - |
| 2 | Material & labour for unserviceable MS nuts, bolts and washers of any size & length as required at site and as directed for hold fastening column pipes/centrifugal pump and motor set complete all as specified and directed by Engineer-in-Charge. | 50 | KILOGRAM | - | - |
| 3 | Transporting defective submersible motor of any make and capacity of 30 HP to workshop, material & labour for dismantling motor, taking out burnt copper winding of stator,cleaning the casing and stator with wire brush and cleaning the surface, rewinding the motor using super enameled insulated copper winding wire of existing gauge, insulating & drying , complete re-assembling the motor to its original form after replacement of defective parts and testing for satisfactory run, bringing back to site of work complete all as specified and directed by Engineer-in-Charge.
Note :(i) Supply & fix in replacement of defective parts and remetaling, turning & polishing of motor shaft shall be measured and paid separately under respective items her in after.
(ii) Rate quoted by the tenderer is deemed to include the cost for replacement of minor parts like nuts, bolts, washers, etc | 4 | EACH JOB | - | - |
| 4 | All as per item no 3 here in above but for 40 HP motor | 4 | EACH JOB | - | - |
| 5 | All as per item no 3 here in above but for 50 HP motor | 4 | EACH JOB | - | - |
| 6 | Material & labour for remetalling turning & polishing of motor shaft including lathe work of submersible motor of capacity 30 to 50 HP complete all as specified and directed by Engineer-in-Charge. | 8 | EACH JOB | - | - |
| 7Supply only in replacement of following defective parts of submersible motor of capacity 30 to 50 HP complete all as specified and directed by Engineer-in-Charge. Note - (i) The original parts as provided by the manufacturer only be used in the work. (ii) The work is to be carried out on the motors dismantled under item No 3, 4 & 5 above) : - | |||||
| 7.01 | Bearing bush gun metal | 10 | EACH | - | - |
| 7.02 | SS Sleeve for shaft | 10 | EACH | - | - |
| 7.03 | Oil Seal. | 10 | EACH | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.49 MB
BOQ_864568.xls
BOQ • 0.77 MB
PS8617.pdf
Tender Documents • 0.82 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .