Providing and Laying China mosaic on terrace of Bhachau Division and misc civil work under Bhachau Division under Anjar circle office.

Name of work: Providing and Laying China mosaic on terrace of Bhachau Division and misc

civil work under Bhachau Division under Anjar circle office.

PARTCULARS OF ITEM QTY RATE PER AMOUNT

Demolition of Brick work and stone masonry including

stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift.(ii) In Cement

Dismentaling tiled of stone floors laid in mortar including

2 stacking of serviceable materilas and disposal of 358.00 48.63 Smt

unserviceable materials with all lead and lift.

Removing and scraping of old deteriorated plaster of any

thickness fromm wall / R.C.C member including stacking of

serviceable material and disposal of unserviceable from site

of work with all lead and lift

Dismentaling of sheet roofing including ridges, Hips,Valleys,

Gutters etc. stacking of serviceable and disposal of

unserviceable materials with all lead and lift.(ii) A.C. sheet

Providing & lying controlled concrete M-200 and finishing

smooth with curing etc complete including the cost of form

5 work but excluding the cost of reinforcement for R.C.C. 3.00 6846.83 Cmt.

Work in . -plinth beam,coping, Lintel ,sill beam,

chhajahs,beam etc. for F.F.

Providing TMT Bar FE 500D reinforcement for R.C.C.work

6 including bending, binding and placing in position complete 210.00 77.56 Kg

upto floor two level

Precast concrete block masonry (including quoin blocks

jamb blocks closer etc.) with solid concrete blocks of

approved size made of cement concrete 1:3:6 mix (1-

Cement : 3 coarse sand: 6- graded stone aggregates of

mm and down grade) in for super structure for First floor

cement morter 1:6 (upto 10 ton)

20 mm. Thick sand faced cement plaster on walls up to

height 10 meters above ground level consisting of 12 mm.

8 Thick backing coat of C.M. 1:3 (1 cement : 3 sand) and 8 184.00 312.56 Smt.

mm. Thick finishing coat of C.M.. 1:1 (1 cement : 1 sand) etc.

Applying One coat of exterior primer of approved brand and

manufacture on new wall surface to give an even shade

9 including thoroughly brushing the surface free from mortar 184.00 34.66 Smt.

dropping and other foreign matter and sand papered

Finishing wall with weather proof extirior emulsion paint on

wall surface( Two coats) to give an required shed even shed

10 after throughly brushing the surface to remove all 184.00 119.07 Smt.

dirtandremains of loose powdermaterials etc compete

Providing cement vata 10 x10 cm size quarter round in

11 cement concrete in C.M. 1:1 including neat cement finishing 30.00 24.04 Rmt.

watering etc. complete.

Providing and laying broken chine mosaic flooring for

terrace using 12mm to 20mm broken piece of glazed tiles to

be laid over cement mortar 1:3 to plain or slop and to be

12 tempered to bring mortar crème out upto surface using 358.00 771.98 Smt.

white cement including rounding off junctions and extending

them upto 15 Cm along the wall, ceiling with water and

oxalic acid etc. as dorected.

Providing laying and jointing in true line and level 32mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

13 wall with the help of clamp at every two metre C/C or shall 20.00 117.97 Rmt.

be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing & fixing to wall, ceilling, and floor in plumb by

means of GI clamps of 18 gauge sheet with 1 to 1.5 mtrs.

Distance 6.00 Kg. /cm2 working pressure polythene pipes of

14 approved brand incl. joining with approved solution & all 15.00 280.67 Rmt.

fittings like bend, tee. Y bend plug bend with water tight

jointsIf pipe laid in trenchesscope includes all type earth

work up to 750 mm depth .……-110mm Dia.

Providing and fixing ISI quality heavy gun metal check or non

return valve full way wheel valve - 25MM diameter.

Providing and fixing 50mm stainless steel Grade 304 pipe

hand railing for staircase with necessaary blausters vertical

pipe of required diameter fixing the same by airldite

necessary welding etc as directed by EIC

Providing corrugated G.I. Sheets Class-3 roofing fixed with

Galvanied iron 'J' or 'L' hooks bolts and nuts 8 mm. diameter

17 with bitumen and G.I.L impet washers filled with white lead 24.00 656.00 Smt.

complete excluding the cost of purlins, raffers and trusses.

(I) 0.50 mm. Thick sheet

Providing , Fixing & Fitting fully glazed, partly glazed Single

leaf anodized aluminum colour anodized(of approved shade)

Entrance door using extruded section fabricated by standard

manufacturers with framing 10.15x4.45cm rectangular

section with & door shutter made from 10.15x4.45cm

aluminum bottom section, top & vertical section

18 cmx4.45cm size using 5 mm thick “TRIVENI” or HB4 3.00 4953.00 Smt.

plain/colour glass/4 Acrylic Sheets/ 12 mm Board with

glazing deep rubber gasket with locking arrangement of

GODREJ LOCK with all fixtures & fastening of anodized

section with aluminum beeding without floor mounted door

closer etc. completed.. Rates are with all labours and

material as per drawing and as directed.

Providing & fixing anodized aluminum partition having

style & rail 63.5x38.10 of Jindal Section no @ Wt

gm/Rft)Partly penneled and partly glazed with 5 mm thick

19 glass including fitting on wall or at opening complete 8.00 3010.36 Smt.

with rubber on all four side for air tight fitting incl. all

fixtures & fastenings as directed by E.I.C.

Providing and fixing cupboards door using 18MM

plywood at backside laminate of approved shade for all

sides and inside white laminate including materials such as

beading strips, handles, magnets, adhesive having good

quality of locking arrangements including labour complete in

all respect as directed by EIC.

Providing and fixing wall cupboards, of 16" depth using

18MM plywood for sides & shutters, 6MM plywood at

backside laminate of approved shade for all sides and inside

21 white laminate including materials such as beading strips, 16.00 7547.00 smt.

handles, magnets, adhesive having good quality of locking

arrangements including labour complete in all respect as

directed by EIC.

Bidder's Offer ( _____% Above/Below) (B)

Grand Total (C = A + B)

Grand Total (C = A + B)

Goods & Service Tax ( D = C x GST in 18% Prevailing or Applicable )

Grand Total Including GST ( E = C + D )

Grand Total Including GST ( E = C + D )

Final Offer with GST in Rs.

Final Offer with GST in words :

( To be filled online)

Signature of contractor with seal ADDITIONAL CHIEF ENGINEER,

PGVCL, CIRCLE OFFICE,ANJAR.