INSTALLATION OF 07 NUMBERS OF HIGH MAST LIGHTS IN COLLECTORATE PREMISES OFFICERS COLONY AND AWAS VIKAS COLONY IN DISTRICT PILIBHIT UNDER INFRASTRUCTURE FUND

Supply & fixing of 12.5 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 310 mm base plate 25 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 luminaries & its control gear boxes 0.75 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc complete in all respect.

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 75 to 90 Watt. Confirming to IP 66 Protection complete in all respect.

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S.clamps etc. of suitable size or as directed by the Engineer Incharge,complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc L SIZE 50.00 SQMM 3-1/2 CORE

Supply and fixing of 40 Amp. 4 pole MCB (10 KA)

Supply and wiring of submain with two number 4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy guage rigid steel conduit on surface, with one number 14 SWG copper earth continuity wire, complete in all respect.

Supply and fixing of LED light pipe fitting complete in all respect

Supply and burring of Safe Earthing Electrode T-39 Cu Coppe Coated,Length up to 3000mm, outer pipe 76.3mm x 3.2 inner pipe 42.4mm x 2.6mm, terminal Dia 12mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive &conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonry housing. (From electrode terminal to switch board,cost of 25 x 3 Copper Strip will be extra).Make: As approved in U.P. P.W.D., & C.P.R.I. Certified.

Supply and laying of 32 mm x 6 mm G.I. strip from earth electrode directly in the ground as required complete in all respect.

Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc.complete in all respect as per direction of the Engineer-Incharge. 50 sq. mm

Labour charge for repairing of road by mixing grit/tarcoal/inter locking /rcc and fixing the proper patch without cost of grit /tarcoal /inter locking with paint required loading lifting complete in all respect .

Making electrical connection and energise high mast light as per direction given by engineer in charge.