PP/08/3480/SARTHI/NR/25

SUMMARY OF QUOTATION

Services Total Cost of Dry dock hire charges and other Admin & general services quoted in the BoQ

Cost of repair part :- (a) Total cost of Hull work Package

(b) Total cost odf Engineering Work Package

(c ) Total cost of Electrical work Package

GST on serial 1.01 to 1.04

Total Budgeary Cost of Spares

GST applicable for 1.06

Any other taxes & Duties

Miscellaneous (not included in any of the serial above)

GST if any on serial 1.09

BoQ_Ver3.1

PROVIDE 01 IN NO "REFIT COORDINATOR" [PREFERABLY RETIRED IN SENIOR SAILORS (ERA/EAP)]. ALTERNATELY, PERSONAL WITH MINIMUM B. TECH (MECH/ELECTRICAL/ ELECTRONICS/NAVAL ARCHITECTURE) WITH MINIMUM EXPERIENCE OF 05 YEARS IN SHIP REPAIR FIELD. SALARY TO MATCH WITH SHIPYARD ASSISTANT MANAGER LEVEL. ADDITIONAL DAYS ARE INCLUDED FOR PRE & POST REPAIR/REFIT COORDINATION/ PLANNING ACTIVITIES. REQUIRED TO WORK IN TOUGH ENVIROMENT ONBOARD DURING VARIOUS REPAIRS/TRIALS, ON SHIFT BASIS ROUND THE CLOCK, INCLUDING SUNDAY/HOLIDAY AS PER DEMAND OF THE REPAIR/REFIT.

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

BOAT DEVIT

PAINTING WITH FULL PAINT SCHEME PAINTING OF ONLY TOP COAT OF FOLLOWING AREAS:- EXTERNAL ABOVE WATER HULL AREA INCLUDING BOTH SIDES OF BULWARK INCLUDING PAINT COST (PAINT TO BE SUPPLIED BY FIRM)

WEATHER DECKS INCLUDING PAINT COST (PAINT TO BE SUPPLIED BY FIRM)

BILGE PLATFORM SUPPORTING BRACKETS AT INDICATED LOCATIONS TO BE RENEWED. MAT - MS

OVERHAULING OF ANCHOR WINDLASS TO BE CARRIED OUT. RENEW COMPONENTS/ PARTS IF FOUND DEFECTIVE INCLUDING OIL CHANGE.

OVERHAULING OF CAPSTAN TO BE CARRIED OUT. RENEW COMPONENTS/ PARTS IF FOUND DEFECTIVE.

SUPERSTRUCTURE OUTSIDE BULKHEAD, BOLLARDS, LADDERS, MAST, INSIDE BULWARK, ALL DECK FITTINGS INCLUDING PAINT COST (PAINT TO BE SUPPLIED BY FIRM)

OVERHAULING OF TOWING HOOK TO BE CARRIED OUT. LOAD TEST TO BE CARRIED OUT POST REPAIR/OVERHAULING AND THE CERTIFICATE FOR THE SAME BE PROVIDED. SWL- 25 T

MAIN MAST, RIGGING MAST, FUNNEL AND DRESSING LINES FITTINGS ARE TO BE EXAMINED THOROGHLY. RENEW ALL EYE PLATES, EYES, SURROUNDINGS STRUCTURE AS NECASSARY. PAINTING TO BE CARRIED OUT AS PER NO 53/16.

OVERHAULING OF WT DOORS INCLUDING RENEWAL OF RUBBER BEADING TO BE UNDERTAKEN. (WT DOORS - 8, RUBBER BEADING APPROX-40 MTRS).SURVEY AND RENEWAL ALSO TO BE CARRIED OUT METAL PARTS.

RENEWAL OF BOLLARDS BE UNDERTAKEN(ON ACTUAL POST SURVEY). BOLLARD PULL TEST TO BE CARRIED OUT POST RENEWAL & THE CERTIFICATES FOR THE SAME BE PROVIDED: (A) SINGLE BOLLARD- 02 (B) DOUBLE BOLLARD- 04 (C) "A" FORM BOLLARD- 01 (D) CRUCIFORM BOLLARD- 01

OVERHAULING OF WT PORT HOLES & WINDOWS INCLUDING RENEWAL OF APPROPRIATE RUBBER BEADING TO BE UNDERTAKEN.

OVERHAULING OF WT HATCHES INCLUDING RENEWAL OF RUBBER BEADING TO BE UNDERTAKEN. (WT HATCHES - 05, RUBBER BEADING APPROX-20 MTRS).SURVEY AND RENEWAL ALSO TO BE CARRIED OUT OF METAL PARTS.

YARD CRAFT NAME BOARDS INCLUDING SECURING FOUNDATION/ BASE OF BOTH SIDES ARE PERISHED. SAME TO BE RENEWED AS PER SAMPLE.(MAT - ACERLIC SHEET AND MS FOUNDATION))

RENEWAL OF FASTENERS AND GASKETS TO BE CARRIED FOR ALL MAINTENANCE HOLES COVERS OF TANKS.

DECK UNDERLAY IS TO BE RENEWED IN CREW BATHROOM AND GALLEY

CLEANING OF INTERNAL SURFACES OF TRUNKINGS TO BE CARRIED OUT. EXTERNAL PAINTING WITH APPROPRIATE PAINT SCHEME AS PER NO 53/16.

OVERHAULING OF MUSHROOM HEADS TO BE CARRIED OUT. RENEW DEFECTIVE PARTS.

04 IN NOS FIRE HOSE BOXES WITH HINGES AND LOCKING ARRANGEMENTS DAMAGED. SAME TO BE RENEWED.

SEVICEABILITY CHECKS, PRESSURE TESTING, RENEWAL OF CARTIDGE AND REFILLING TO BE CARRIED OUT FOR 9 LTR AFFF EXTINGUISHERS. CERTIFICATES TO BE PROVIDED.

SEVICEABILITY CHECKS, PRESSURE TESTING AND REFILLING TO BE CARRIED OUT FOR 2 KG CO2 EXTINGUISHERS.CERTIFICATES TO BE PROVIDED.

SEVICEABILITY CHECKS, PRESSURE TESTING,RENEWAL OF CARTIDGE AND REFILLING TO BE CARRIED OUT FOR 5 KG DCP EXTINGUISHERS.CERTIFICATES TO BE PROVIDED.

SEVICEABILITY CHECKS, PRESSURE TESTING,RENEWAL OF CARTIDGE AND REFILLING TO BE CARRIED OUT FOR 45 LTR TYPE EXTINGUISHER.CERTIFICATES TO BE PROVIDED.

LIFE RAFT- SERVICEABILITY CHECKS OF HRG AND HAMMER H 20. RENEW IF FOUND DEFECTIVE.

LIFE RAFT- WEBBING STRAPS TO BE RENEWED AS PER FOST GUIDELINES.

SHIPS SIDE GUARD RAILS OF LENGTH 10 METERS TO BE RENEWED.(SIZE 1.5 INCH)

MESS DECK LOCKERS FOUND DEFECTIVE, TO BE REPAIRED/ REPLACED.

MS CLEATS ON (P & S) BULWARK DAMAGED, TO BE RENEWED INCLUDING DOUBLER PLATE . SIZE 28 MM

TANK CLEANING OF STP IS TO BE UNDERTAKEN

DECK EYE FOR AWNING ARE TO BE RENEWED

ROOF OF FIXED AWNING AT FOXEL TO BE RENEWED.

DRAIN TO BE PROVISIONED FOR WASH BASIN AT FOXLE

SANITARY LINE TO BE CHEMICAL CLEANED

RUBBER BEADING OF WT FLAPS PROVIDED ON UPPER DECKS FOR VENTILATION TO BE RENEWED. (PAYMENT AS ACTUALS )

SITTING TABLE TO BE RENEWED AT FOXLE. MAT-MS

CHAIN OF FIXED STANCHIONS TO BE POSITIONED. MAT- SS

ROPE REEL FOUNDATION TO BE RENEWED

CORREDED SANITARY LINE TO BE RENEWED

ENGINEERING

AIR SYSTEM

9000K HRLY ROUTINE (FIRST TOP END OVERHAUL) TO BE CARRIED OUT

REPLACEMENT OF BATTERY , 200 AH 12 V

REPLACE ALL BELTS

COOLANT TO BE REPLACED. (QTY-300 LTRS, TYPE- CATERPILLAR ELC )

REPLACE ENGINE OIL AND LUB OIL FILTERS. ( OIL- 15W40, QTY-400 LTRS)

REPLACE FUEL SYSTEM PRIMARY FILTER/WATER SEPARATOR

REPLACE FUEL SYSTEM SECONDARY FILTER

CLEAN THE OIL SUCTION SCREEN AFTER THE OIL HAS BEEN DRAINED

REPLACE HOSES AND CLAMPS. (HOSES-12, CLAMPS-24)

INSPECT THE CYLINDER HEAD ASSEMBLY AS PER INSTRUCTION

INSPECT OF FOLLOWINGS :- (A) CRANKSHAFT VIBRATION DAMPER (B) TURBOCHARGER (C) FUEL PRIMING PUMP (D) PRELUB PUMP,(F) PUSH RODS,(G) ROCKER ARMS SPACER PLATE, (H) CAMESHAFT, (J) ENGINE CONTROL MODULES (K) OIL PIMP (L) FUEL TRANSFER PUMP

REPLACEMENT OF FOLLOWINGS :-(A) ALL INJECTORS -08 NOS(B) ENGINE WIRING HARNESS (C) EXHAUST MANIFOLD SEAT (D) INLET MANIFOLD GASKET (E) INLET MANIFOLD SEALS (F) ENGINE CONTROL MODULES (G) EXHAUST BELLOW SHIELDS.

REPLACEMENT OF ELECTRONIC UNIT OF INJECTORS

ALIGNMENT TO BE CARRIED OUT OF BME DRIVEN EQUIPMENTS

SOFTWARE UPDATION

REPLACEMENT OF VALVE ASSEMBLY( DUPLEX FILTER GROUP)

REPLACEMENT ENGINE VALVE LASH

STBD MAIN ENGINE AIR STARTING MOTOR MALFUNCTIONING, TO BE RENEWED.

CLEAN, LUBRICATE AND INSPECTION OF PORT MAIN ENGINE AIR STARTING MOTOR .

REPLACEMENT OF SPEED SENSOR

SERVICEABILITY CHECKS OF PROTECTIVE DEVICES TO BE CARRIED OUT. HOT AND COLD CHECKS OF FOLLOWING PROTECTIVE DEVICES OF ENGINE TO BE CARRIED OUT. (A) LOW LUB OIL PRESS CUT OUT (B) HIGH LUB OIL TEMP CUTOUT (C) HIGH EXHAUST TEMP CUTOUT (D) OVERSPEED TRIP

BOTH MAIN ENGINE CONTROL PANEL DISPLAY NOT WORKING, TO BE RENEWED.(WHEEL HOUSE)

FULL POWER TRIALS OF BOTH MAIN ENGINES TO BE OFFERED POST COMPLETION OF ROUTINE

VISUAL INSPECTION OF COUPLINGS FOR LOOSE NESS AND WEAR & TEAR.

TEST ALL RELIEF VALVES AND RESET , SIZE 80 MM, REL PRESS. 33 KGF/SQ CM.

TEST THE SYSTEM FOR MAXIMUM WORKING PRESSURE AND CHECK FOR LEAKS. WORK PRESS 30 KGF/SQ CM.

AIR INLET FILTER TO BE CHANGED.

SAFETY CUTOUT MALFUNCTIONING TO BE REPLACED

CALIBRATE THE SAFETY CUTOUTS

DRAIN & AND RENEW OIL IN SUMP(OIL TO BE SUPPLIED BY FIRM).

OVERHAUL AND PRESURE TEST ALL VALVES IN THE SYSTEM.

INTER COOLER TO BE CLEANED AND PRESSURE TESTED.

REPLACEMENT OF BELTS(BELTS TO BE SUPPLIED BY FIRM).

CHECK TIGHTNESS OF FOUNDATION BOLTS & RE- TORQUE, IF NECESSARY.

CHECK AND CALIBRATE SOLENOID VALVE FOR CORRECT FUNCTIONING. CHECK FOR LEAKAGE IN THE AIR LINE.

CLEAN AIR FILTERS OF THE SYSTEM.

OVERHAULING OF AIR WHISTLE.

OVERHAULING AND PRESSURE TESTING OF SYSTEM VALVES. (SIZE- 65MM)

DRAIN LUBRICATING OIL IN SUMP AND REFILL WITH NEW OIL. (QTY- 5 LTRS)(OIL TO BE SUPPLIED BY FIRM)

TAPPET CLEARANCE-MEASURE INLET AND EXHAUST VALVES TAPPET CLEARANCE AND ADJUST IF NECESSARY WHEN ENGINE IS COLD.

EDA TRIALS TO BE OFFERED POST COMPLETION OF ROUTINES. ANY DEFECT OBSERVED DURING TRIALS TO BE RECTIFIED.

OVERHAULING OF SUCTION AND DISCHARGE VALVES

CARRY OUT VISUAL SURVEY OF PUMP FOUNDATION.

RENEW SUCTION AND DISCHARGE COMPENSATORS

RENEW SUCTION AND DISCHARGE GAUGES .

OVERHAULING OF BILDGE PUMP.

OVERHAUL SUCTION AND DISCHARGE VALVES

CARRY OUT VISUAL SURVEY OF PUMP FOUNDATION.

CARRY OUT VISUAL SURVEY OF PUMP FOUNDATION.

RENEW SUCTION AND DISCHARGE GAUGES

OVERHAULING OF FIRE PUMP

CARRY OUT VISUAL SURVEY OF PUMP FOUNDATION.

REFIT SUCTION AND DISCHARGE VALVES

CALIBRATE SUCTION AND DISCHARGE GAUGES. CALIBRATION CERTIFICATE TO BE PROVIDED FOR GAUGES.

OVERHAULING OF FIRE PUMP

OVERHAUL SUCTION AND DISCHARGE VALVES

CARRY OUT VISUAL SURVEY OF PUMP FOUNDATION.

OVERHAULING OF DOMESTIC FRESH WATER PUMP.

REPLACE SUCTION AND DISCHARGE GAUGES. CALIBRATION CERTIFICATE TO BE PROVIDED FOR GAUGES.

CLEAN FUEL RU TANKS AND INSPECT FOR RUST AND CORROSION. POST CLEANING TANK TO BE PRESERVED WITH APPROPRIATE COATING.(QTY- 02 NOS)

OVERHAUL VALVES IN THE SYSTEM; CARRY OUT PRESSURE TESTING UP TO 4 KG/CM2 . (SIZE- 65 MM, QTY- 06 NOS)

AIR SYSTEM PIPES TO BE BLOW THROUGH AND PRESSURE TESTED. (SIZE- 10MM LENGTH- 20 M)

LIBRATE ALL PRESSURE GAUGES IN THE SYSTEM. CALIBRATION CERTIFCATE TO BE PROVIDED.(QTY-10 NOS, RANGE- 0- 50KG/SQ.CM)

MAIN ENGINE CONTROL

FFF SYSTEM

PRESSURE TESTING OF AIR STORAGE BOTTLES AND LEAK TEST OF BOTTLE FILLING AND DISCHARGE VALVES. (TEST PRESSURE-45 BAR)

OVERHAULING AND PRESSURE TESTING OF SYSTEM VALVES (07 NOS OF SIZE 80 MM, 03 IN NOS OF 200 MM, 03 IN NO OF SIZE- 120 MM)

REMOVE PART OF PIPE AND CHECK INTERNAL AND EXTERNAL CONDITION TO ASSES COROSSION DUE TO AGING, CARRY OUT PRESSURE TESTING.

6000 HRLY ROUTINES OF BOTH DIESEL GENERATOR

REPLACE LUB OIL FILTER & FUEL FILTER ( ALL FILTERS TO BE SUPPLIED BY FIRM)

CLEAN ENGINE BREATHER

REPLACEMENT OF AIR CLEANER ELEMENT.

CARRY OUT TAPPET SETTINGS

REMOVE AIR CLEANER & TURBOCHARGER AIR INTAKE CONNECTIONS & CROSS OVER. CHECK TURBOCHARGER FREENESS VISUALLY.

CHECK CRANKSHAFT END PLAY

REMOVE INJECTORS, CLEAN, INSPECT, REPAIR & CALIBRATE.

REMOVE HEAT EXCHANGER. MECHANICAL & CHEMICAL CLEANING TO BE CARRIED OUT.PRESSURE TEST AND PROVE COOLER. (TEST PRESSURE- 5 BAR)

REMOVE TURBOCHARGER. CLEAN, INSPECT & REPAIR WITH NEW REPAIR KIT

TIGHTEN NUT & CAP SCREW OF AIR INLET AND EXHAUST SYSTEM

OVERHAULING OF AUXILIARY WATER PUMP

CHECK VIBRATION DAMPER VISUALLY

REPLACE BELTS FOR ACCESSORIES(BELTS TO BE SUPPLIED BY FIRM)

HOT AND COLD CHECKS OF SAFETY DEVICES FITTED ON ENGINE AND ALTERNATOR TO BE CARRIED OUT.PROVING OF ALL SAFETY DEVICES FITTED IN ENGINE AND ALTERNATOR TO BE OFFERED.

FLUSH LUB OIL AND COOLING SYSTEM WITH RESTORE PLUS, RUN ENGINE TO BRING IT TO OPERATING TEMPERATURE. STOP THE ENGINE REFLUSH COOLING SYSTEM WITH POTABLE WATER 2-3 TIMES. REFILL COOLING SYSTEM WITH COOLANT. RUN THE ENGINE FOR THREE TO FIVE MINUTES(LUB OIL AND COOLANT TO BE SUPPLIED BY FIRM)

POST COMPLETION OF ROUTINES, START THE ENGINE AND CHECK ALL GAUGES, REPLACE IF REQUIRED, CHECK FOR ANY OIL/WATER LEAKAGE, EXHAUST LEAKAGE, STOP THE ENGINE AND RECHECK ENGINE OIL LEVEL, TOP UP IF REQUIRE. AFTER NECESSARY INSPECTION RESTART THE ENGINE. RUN AT IDLE SPEED FOR 15 MINUTES; CARRY OUT LOAD TRIAL ON SHIP AVAILABLE LOAD FOR TWO HOURS. OBSERVE THE ENGINE PERFORMANCE AND RECORD THE ENGINE PARAMETERS

EXHAUST LEAKAGE OBSERVED FROM DG-2, TO BE RECTIFIED

OVERHAULING OF FIRE PUMP

OVERHAULING OF SUCTION AND DISCHARGE VALVES

100 % LOAD TRIALS OF DG 1& 2 TO BE OFFERED POST COMPLETION OF ROUTINES

CARRY OUT VISUAL SURVEY OF PUMP FOUNDATION.

OVERHAULING OF VOITH COOLING PUMP

RENEW SV MOUNTS OF PUMPS

RENEW SUCTION AND DISCHARGE GAUGES.

CARRY OUT RENEWAL OF DEFECTIVE PIPES OF VOITH S/W COOLING WATER SYSTEM. (MAT- CU NI , SIZE- 2'')

OVERHAULING OF PORTABLE SUBMERSIBLE PUMPS TO BE CARRIED OUT. (CAPACITY- 40 TPH)

SEMI RORTARY HAND PUMP FITTED ON UPPER DECK JAMMED. TO BE OVERHAULED

BLOW OUT ALL DISTRIBUTING PIPE LINE WITH COMPRESSED AIR (LP) TO MAKE SURE THAT IT IS NOT BLOCKED.

FIRE ALARM WARNING SYSTEM MALFUNCTIONING/ ERRATIC. DEFECT TO BE RECTIFIED. SERVICEABILITY CHECKS OF ALL FIRE SENSORS

CARRY OUT GENERAL CHECKS INCLUDING PRESSURE TEST AND WEIGHING OF CO2 BOTTLES. ANY DEFECT OBSERVED TO BE RECTIFIED. (CAP-45KG), CERTIFICATES TO BE PROVIDED.

OVERHAUL THE FUEL SEPERATOR AND CARRY OUT FOLLOWING ROUTINES

CHECK HEIGHT POSITION FOR PAIRING DISC.

HORIZONTAL DRIVE- CHECK AXIAL PLAY OF COUPLING AND RENEW BEARINGS OF WORM WHEEL SHAFT.

VERTICAL DRIVE- CLEAN AND CHECK BOWL SPINDLE AND NAVE FOR IMPACT MARKS

VERTICAL DRIVE- CHECK RADIAL WOBBLE OF BOWL SPINDLE

VERTICAL DRIVE- CLEAN AND CHECK BUFFER AND BALL BEARING HOUSING.

VERTICAL DRIVE- RENEW BALL BEARINGS AND TOP BEARING SPRINGS.

CLEAN AND CHECK SPRING AND BRAKE SHOE. RENEWE FRICTION PAD/BRAKE PLUG.

CLEAN AND CHECK FRICTION COUPLING. RENEW FRICTION PADS AND LIPSEAL RING.

DISMANTLE PUMP ASSEMBLY. CLEAN AND CHECK BUSHINGS, WEAR GASKETS, FLEXIBLE COUPLING, RELEF/SAFETY VALVE AND IMPELLER SHAFT. RENEW LIPSEAL RING.

TRIALS TO BE OFFERED POST ROUTINES AND SYSTEM TO BE PROVED

OVERHAULING OF OWS, TO BE CLEANED INTERNALLY. COATING TO BE CHECKED FOR INTACT PHYSICAL CONDITION , IF DEFECTIVE, TO BE REPAIRED TO PREVENT SEVERE CORROSION . TRIALS TO BE OFFERED POST ROUTINES.

CARRY OUT RENEWAL OF DEFECTIVE PIPES OF MAIN ENGINE S/W COOLING WATER SYSTEM . (MAT- CU NI , SIZE- 2''))

FUEL SYSTEM VALVES NOT HOLDING PRESSURE. VALVES TO BE OVERHAULED. (SIZE- 1'' TO 2'', BALL VALVE)

SEA WATER SYSTEM REDUCER FOR MAIN ENGINE AND DG NOT WORKING/MALFUNCTIONING. TO BE OVERAHULED. (SET PRESSURE-3 BAR, TEST PRESSURE- 6 BAR)

OVERHAULING OF FIRE PUMP

SPRINKLERS FITTED IN THE SYSTEM CLOGGED. TO BE REMOVED AND CLEANED. SYSTEM TO BE PROVED POST CLEANING. ANY DEFECT OBSERVED DURING TRIALS TO BE RECTIFIED.

CARRY OUT VISUAL SURVEY OF PUMP FOUNDATION.

OVERHAULING OF FUEL PUMP.

CARRY OUT VISUAL SURVEY OF PUMP FOUNDATION. REPAIR DETORIATED FOUNDATION STIFFENERS AND SUPPORTING RIBS

RENEW SUCTION AND DISCHAGE GAUGES. CALIBRATION CERTIFICATE TO BE PROVIDED FOR GAUGES.

MANUFACTURING OF ZINC PLUGS AS PER SAMPLE

PAINTING OF MAIN ENGINES AND DIESEL GENERATOR INCLUDING SYSTEM PIPES AND ACCESSORIES WITH EQUIPMENT PAINT

CLEANING AND PAINTING OF ENGINE ROOM INCLUDING BILGES

MANUFACTURING OF SAFETY GUARD, AS PER SAMPLE

SERVICEABILITY CHECKS OF FLOOD SENSOR AND MAKE OPERATIONAL

HOT LAGGING ON EXHAUST PIPE LINE OF BOTH MAIN ENGINE AND DA

SECURING NUT FITMENT OF BILGE PLATES

ELECTRICAL

NAVIGATION LIGHT

REMOVE AND EXAMINE SEAWATER SIDE OF ALTERNATOR AIR COOLER FOR CORROSION, EROSION AND FOULING. CLEAN TUBE PLATE AND TUBES WITH WATER JET. CARRY OUT CHEMICAL CLEANING . PRESSURE TEST ON COMPLETION.

CHECK ALL THE CONTACT BOLTS OF THE GENERATOR OUTPUT TERMINAL AND THE BINDING POSTS OF THE EXCITATION SYSTEM ON THE CONTAT STUDS AND BOLTS ARE TIGHT AND FREE FROM CORROSION. CHECK ALL EARTH CONNECTIONS ARE TIGHT AND PROPERLY EARTHED.

CHECK INSULATION OF THE OUTPUT TERMINAL AND REVERSING SWITCH CONTACTS OF GOVERNOR MOTOR FOR SIGN OF BURNS/ CRACKS. REPLACE AS NECESSARY.

CARRY OUT OVERHAUL OF GOVERNOR MOTOR

CHECK AVR FOR SERVICEABILITY. CARRY OUT CALIBRATION. UNDERTAKE THE VOLTAGE CONTROL TEST AND PARALLELING TRAILS.

CHECK THE INSULATION RESISTANCE OF THE THERMO-COUPLE COMPENSATING LEADS.

CHECK SECURING ARRANGEMENT OF POWER AND CONTROL CABLES TO BUS BAR/ AVR. ALL LOOSE SCREWS TO BE TIGHTENED.

REPLACE THE FOLLOWING (A) ELECTRICAL TEMPERATURE INDICATOR. (B) TACHO-METER TRANSMITTER. (C) BALL AND ROLLER BEARING OF SW PUMP MOTOR.

CARRY OUT SPM CHECKS, PHASE BALANCING, INSULATION MEASUREMENT. AND REPLACE BEARINGS, CARRY OUT LOAD TRIALS AND RECORD RESULTS IN LOG BOOK.

CARRY OUT CALIBRATION OF OVER VOLTAGE PROTECTION UNIT (OVPU), REVERSE POWER RELAY AND OVER SPEED TRIP.

CARRY OUT OVERHAULING OF ALTERNATOR AND ENSURE ALL CABLE GLANDS, JOINTS OF SHEET METAL ON THE ALTERNATOR ARE AIR TIGHT AND ALL SEALING STRIPS OF TERMINAL BOX COVER ARE RENEWED.

CARRY OUT SERVICEABILITY CHECKS OF ALL INSTRUMENTATION.

OVERHAULING AND RENEW/REPLACE BEARINGS OF FOLLOWING MOTORS. (A) ELECTRIC DAVIT - 01 NOS. (B) AIR COMPRESSOR -02 NOS. (C) FO CENTRIFUGE - 01 NOS. (D) BILGE/GS PUMP - 01 NOS. (E) FIRE/GS PUMP - 01 NOS. (F) DOMESTIC FW PUMP - 01 NOS. (G) FIRE MOTOR & MONITOR - 04 NOS.

OVERHAULING AND RENEW/REPLACE BEARINGS OF FOLLOWING MOTORS. (A) ELECTRIC DAVIT - 01 NOS. (B) AIR COMPRESSOR -02 NOS. (C) FO CENTRIFUGE - 01 NOS. (D) BILGE/GS PUMP - 01 NOS. (E) FIRE/GS PUMP - 01 NOS. (F) DOMESTIC FW PUMP - 01 NOS. (G) FIRE MOTOR & MONITOR - 04 NOS.

OVERHAUL AND CALIBRATE OF STARTERS OF THE FOLLOWING MOTORS. (A) HP AIR COMPRESSOR MOTOR STARTER-02 (B) BILGE AND BALLAST MOTOR STARTER-02 (C) GS PUMP MOTOR STARTER-02 (D) VSP COOLING PUMP MOTOR STARTER-02 (E) FRESH WATER PUMP MOTOR STARTER-02 (F) VENTILATION MOTOR STARTER-04 (G) WINDLASS MOTOR STARTER-01 (H) CAPSTAN MOTOR STARTER-01 (J) BOAT DAVIT MOTOR STARTER-01 (K) ENGINE ROOM SUPPLY FAN MOTOR - 02 NOS

EXAMINE COVER JOINTS .INSPECT THE SEARCH LIGHT INTERNALLY FOR SIGNS OF BURNING OR OVER HEATING OF COMPONENTS. REPLACE DEFECTIVE COMPONENTS.

OVERHAUL THE CONTACTORS.

LOAD SYNCHRONISING SYSYEM OF DGS NOT WORKING TO BE RECTIFIED.

REPAIR/RENEW DAMAGED INSULATION OF CABLES.

CALIBRATE ALL MEASURING INSTRUMENTS FITTED IN THE MAIN SWITCHBOARD.

RENEWAL OF 12 V, 110 AH LEAD ACID SMF BATTERRIES FOR M/E CONTROL SYSTEM

RENEWAL OF 12 V 7.2 AH LEAD ACID SMF BATTERRIES FOR D/G BACKUP

RENEWAL OF 12 V 180 AH LEAD ACID SMF BATTERRIES FOR STARTING OF 2 IN NO D/G,S

RENEWAL OF 12 V,120 AH LEAD ACID SMF BATTERRIES FOR M/E BACKUP, EMERGENCY LIGHTING AND NAV IGHTS.

CHECK ALARM INDICATING PANEL, RENEW INDICATOR BULBS, RECTIFY DEFECTS IN SENSOR, CIRCUIT AND WIRING.

CLEAN, CHECK AND REPAIR HELM INDICATOR, STEERING OPERATING SWITCH INCLUDING RUDDER ANGLE FEED BACK SWITCH.

230V AND 24 V NAVIGATIONAL LIGHTS NOT WORKING. OVERHAUL CONTROL PANEL AND LIGHTS.

10 IN NUMBER SWITCHES ARE UNABLE TO OPERATE. SUSPECT DEFECTIVE KNOBS/ SPRINGS. KNOBS TO BE REPLACED.

05 IN NUMBER WALL FANS (ALMONARD- HIGH SPEED) NOT WORKING. FANS TO BE REPLACED.

ELECTRIC KETTLE NOT WORKING. KETTLE TO BE REPLACED.

LIGHTING TRANSFORMER NO-1 PRODUCING HUMMING NOISE/OVERHEATING.TO BE OVERHAULED/ REPAIRED.

EMERGENCY SUPPLY (24 V DC) NOT AVAILABLE AT VARIOUS PLACES LIKE MDB & RECTIFIER UNIT IN VOID SPACE, MSB, EMERGENCY LIGHTS ETC. SUSPECT INTERNAL WIRING PERISHED. WIRING TO BE RENEWED. ( 2 CORE)

VOLTAGE MONITORING AND TRIPPING CIRCUIT NOT WORKING. SUSPECT MONITORING RELAY (MAKE-MINILLEC, MODEL- VCTD2 2CO-415 VAC) DEFECTIVE. RELAY TO BE REPALCED AND SYSTEM TO BE PROVED

18 W TUBES OF 2 FEET LENGTH NOT WORKING AT 16 PLACES. TO BE REPAIRED/REPLACED.

30 IN NOS 11 W "U" TYPE CFL LIGHTS AT VARIOUS PLACES NOT WORKING. TO BE REPAIRED/REPLACED.

TERMINAL STRIPS OF CONTROL DESK INDICATION SYSTEM IN WHEEL HOUSE IS INTERNALLY SHORT CIRCUITED. TERMINAL STRIPS TO BE REPLACED .

VOID SPACES 24 V DC MAIN DB CONNECTORS PERISHED, TO BE RENEWED.

02 IN NUMBER PERISHED CONNECTORS TO BE RENEWED IN 2.5 KW TRANSFORMER RECTIFIER UNIT AT VOID SPACE.

10 IN NUMBER THREE PHASE STARTERS ARE HARD TO OPERATE DUE TO WEAR OUT OF RED/GREEN PUSH BUTTONS. PUSH BUTTONS OF THE SAME NEED TO BE RENEWED.

03 IN NUMBER SPEAKERS OF MAIN BROADCAST/LOUD HAILER NOT WORKING. TO BE REPAIRED/REPLACED.

06 IN NUMBER INDICATION LAMPS OF SHORE SUPPLY JUNCTION BOX ARE DEFECTIVE. TO BE RENEWED

VSP COOLING SYSTEM FRESH WATER PP MOTORS ARE GETTING SWITCHED ON DURING CHANGE OVER OF SUPPLY FROM DG TO SHORE AND VICE-VERSA. SUSPECT AUTO CIRCUIT DEFECTIVE. TO BE RECTIFIED.

GENERAL ALARMS BELLS NOT WORKING. DEFECTIVE TO BE RECTIFIED.

SHORE SUPPLY CABLE PERISHED AT VARIOUS PLACES. TO BE RENEWED WITH 4X16 SQ.MM CABLE

INTERCONNECTING SOUND POWER TELEPHONES WITH BRIDGE NOT WORKING. TO BE REPAIRED

AMMETERS FITTED ON CONTROL PANEL OF BILGE PUMP AND HP AIR COMPRESSOR DEFECTIVE, TO BE REPLACED. CALIBRATION CERTIFICATE TO BE PROVIDED.

FIRE ALARM SYSTEM NOT WORKING. DEFECT TO BE RECTIFIED.

CHECK AND RENEW DEFECTIVE CONTACTS AND WIRING

CHECK AND RENEW BRAKE LININGS

CARRY OUT INSPECTION OF THE RUBBER GASKET BETWEEN COVER AND SHELL BODY OF THE CONTROLLER.

CARRY OUT COMPLETE OVERHAULING OF THE WINDLASS MOTOR AND CONTROLLER PANEL. CHECK ALIGNMENT ON RE-FITMENT & CARRY OUT LOAD TRIALS FOR 4 HOURS.

CARRY OUT OVERHAULING OF THE RANGES FOR PROPER OPERATION.

OVERHAUL, TEST AND RESET ALL SAFETY MECHANISM.

CARRY OUT OVERHAUL OF THE BROADCAST AND SRE EQUIPMENT. CHECK FOR OPTIMUM PERFORMANCE. TRIALS TO BE OFFERED POST OVERHAUL

PORT MAIN ENGINE BATTERY CHARGER NOT WORKING, TO BE REPLACED

NAVIGATION LIGHT NOT WORKING,TO BE REPLACED

SERVICEABILITY CHECKS OF SART

SERVICEABILITY CHECKS OF EPIRB

DD PACKAGE

DOCK BLOCK PREPARATION FOR DOCKING OF SHIP IN VERSION - I AND II, BOTH CENTER LINE AND SIDE BLOCKS. SHIPYARD TO ARRANGE FOR THIRD PARTY INSPECTION AND HAND OVER DULY RECOMMENDED CERTIFICATE FOR DOCK BLOCK PREPARATION TO NAVY POST INSPECTION

DOCKING AND UNDOCKING OF THE VESSEL IN VERSION-I&II (DURATION 60 DAYS). SHIPYARD TO PLAN AND COMPLETE ALL DRY DOCK RELATED WORK WITH IN DRY DOCK TIME. ELSE SHIPYARD TO CONTINUE DOCKING OF SHIP ALONG WITH ALL ALLIED SERVICES TILL COMPLETION OF WORK WITH OUT ANY EXTRA COST. PAYMENT WILL BE RESTRICTED TO ACCEPTED PERIOD OF CONTRACT

DOCKING & UNDOCKING (QUOTE AS ONE UNIT)

SUBSEQUENT DAYS IN DOCK.

ASSISTANCE FOR DOCKING & UNDOCKING (QUOTE AS ONE UNIT)

ARRANGE PILOTAGE FOR TAKING THE VESSEL FROM NAVAL JETTY TO THE DOCK, DOCKING, UNDOCKING & DELIVERY OF VESSEL BACK AT NAVAL JETTY.QUOTE UNIT RATE PER DAY

MOORING/UNMOORING AND LINE HANDLING FOR EACH OPERATION ESTIMATED FOR 4 OPERATION

SHIPYARD)

PROPULSION VOITH SYSTEM (PORT & STBD) (MAKE -M/S VOITH TURBO SCHNEIDER PROPULSION)

PROPULSION VOITH SYSTEM (PORT & STBD)

MAIN SEA CHEST VALVE (M/S TEMBA SHIPYARD)

HP JET CLEAN OF THE FOLLOWING AREA TO BE UNDERTAKEN (WITH A PRESSURE NOT EXCEEDING 3000 PSI) (I) U/W HULL (EXTERNAL) AREA

(ii) Boot top area

BLASTING OF FOLLOWING AREA TO BE UNDERTAKEN: (I) UNDERWATER HULL INCLUDING BOOT TOP

(II) WEATHER DECKS INCLUDING BULWARK

WEATHER DECKS HULL

POWER TOOL SURFACE AREA PREPARATION OF FOLLOWING AREA TO BE UNDERTAKEN: CARRY OUT POWER TOOL SURFACE PREPARATION OF FOLLOWING AREA TO ST 3 STANDARDS FOR UTG SURVEY AND PAINT APPLICATION WHEREEVER PEELED OFF / PAINT DEFECTIVE AS PER VISUAL SURVEY: TANK AND TANK TOP, BILGES , COFFERDOM, VOID SPACE AND CHAIN LOCKER

UTG SURVEY OF FOLLOWING ARE TO BE UNDERTAKEN. (I) UNDERWATER HULL INCLUDING BOOT TOP

SEA TUBES GRATING REMOVE,CLEAN,EXAMINE GRATINGS OF INLETS/ DISCHARGES AND SEA CHESTS. RENEW IF DETORIATED . PAINTING TO BE UNDERTAKEN POST EXAMINATION AS PER NO 53/16.

(II) WEATHER DECK

(III) TANK AND TANK TOP, BILGES , COFFERDOM, VOID SPACE AND CHAIN LOCKER

MANUAL CLEANING OF FOLLOWING AREA IS TO BE UNDERTAKEN: MANUALLY CLEAN FOLLOWING AREA AND PRESENT FOR VISUAL SURVEY.THE AREA SHOULD BE WASHED OUT WITH FRESH WATER AND SOAP WATER TO REMOVE ANY SEDIMENT OR DIRT PRESENT IN THE TANK (A) ENGINE ROOM BILGES (B) VOID SPACE (C) COFFERDOM (D) CHAIN LOCKER (E) WATER BALLAST TANK

BELTS

MANUALLY CLEAN FOLLOWING TANKS WITH FRESH WATER AND SOAP WATER TO REMOVE ANY SEDIMENT OR DIRT PRESENT IN THE TANK (A) FUEL TANK-02 (200 SQM) (B) LUB OIL TANK (55 SQM) (C) FOAM TANK-01 (75 SQM) (D) FRESH WATER TANK- (70 SQM)

SEA TUBE (A) HYDRO JET BLASTING, VISUAL SURVEY AND PRESSURE TESTING OF SEA TUBE INCLUDING SEA CHEST TO BE CARRIED OUT IF REPAIRED/RENEWED POST VISUAL SURVEY REPORT AND UTG REPORT. (B) CARRYOUT RENEWAL OF DEFECTIVE SEATUBES.

PAINTING WITH FULL PAINT SCHEME :- (I) UNDERWATER HULL INCLUDING BOOT TOP INCLUDING PAINT COST (PAINT TO BE SUPPLIED BY FIRM)

WEATHER DECK INCLUDING PAINT COST (PAINT TO BE SUPPLIED BY FIRM)

CHECK DRAUGHT MARKS ARE TO BE IN POSITION AND TO BE CLEARLY PAINTED. (PAINT WITH TWO COATS OF PRIMER, TWO COATS OF ANTICORROSIVE PAINT AND TWO COATS OF WHITE FINISH).

(A) CHAIN CABLE

(B) SWIVEL PIECE

(C) LUG LESS JOINING SHACKLES

(D) D SHACKLES

(E) ANCHORS INCLUDING SPARE ANCHOR

EXAMINE OF ALL SACRIFICIAL ANODES & RENEWAL IF CONSUMED MORE THAN 50% . (TYPE MK IV FOR U/W HULL, QTY 21 & TYPE MK III - QTY 22 )

TUBE/FIXED FENDERS SECURING BOLTS CORRODED AND PERISHED TO BE RENEWED. MAT -SS

STEEL RENEWAL IS REQUIRED TO BE CARRIED OUT POST SURVEY OF UNDER WATER HULL, SUPERSTRUCTURE, DECKS, PLATFORMS, DECK FITTINGS INCLUDING BOLLARDS/ CLEATS AND FOUNDATION OF ALL DECK MACHINERIES/ EQUIPMENTS. (HULL SURVEY BY NSRY TEAM (KOC))

AIR PRESSURE TESTING AIR PRESSURE TEST TO THE 0.2 BAR PRESSURE OF THE FOLLOWING TANKS TO BE UNDERTAKEN IF REPAIRED BY BUILD-UP/RENEWAL OR ARE SUBJECTED TO HOTWORK FOR WELDING OF PAD PIECE/ FOUNDATION ON THEIR BOUNDARIES: FRESH WATER TANK- 02 , LUB OIL TANK-01 , FO TANK -02, VOID SPACE/BALLAST TANK -02

ANCHOR AND CHAIN CABLE ANCHOR AND ANCHOR CHAIN CABLE AND ASSOCIATED FITTINGS ARE TO BE MECHANICALLY CLEANED, EASED FOR FREE MOVEMENT, HYDRO JET BLAST CHAIN CABLE TO BARE METAL, PAINT WITH BLACK BITUMINOUS PAINT POST SURVEY IAW NO 02/21 AND REFIT BACK. RENEW OFF ALL SUCH PARTS WHICH DECLARED UNSERVICEBILE & PROVE LOAD TEST AND SUBMIT LOAD TEST CERTIFICATE TO COY OFFICE. NOTE : -THE JOB INVOLVES REMOVAL OF ALL ANCHOR ACCESSORIES, LAYING OUT AND HYDRO JET BLASTING FOR SURVEY AND PAINTING AND FINAL REFITMENT POST SURVEY BY NSRY. DETAILS OF ACCESORIES ARE AS FOLLOWS:-

HAWSE PIPE COVER OF FOXLE FOUND TO BE CORRODED AND DAMAGED. SAME TO BE RENEWED ALONG WITH BUTTERFLY NUTS.

TYRE FENDERS TO BE RENEWED WITH SUPPORTING CHAIN AND SHACKLE INCLUDING FASTENERS. (MATERIAL GI )

INSPECT THE CONDITION OF VOITH BLADE FOR ANY DAMAGE AND ABNORMALITY.

INSPECT THE BLADE ACTUATING MECHANISM FOR PROPER FUNCTIONING.

CHECK THE AXIAL CLEARANCE OF BLADES WITH ROTOR CASING FOR CORRECT LIMITS AS PER USER MANUAL.

CHECK THE MAIN SEAL FOR ANY LEAKAGE AND GOOD CONDITION.

DRAIN THE HYDRAULIC OIL FROM THE ELEVATED TANK AND SYSTEM.FLUSH THROUGH THE SYSTEM AND CLEAN THE TANK. RENEW THE FILTERS (06 IN NOS) AND OIL(OIL AND FILTER TO BE SUPPLIED BY FIRM)

TECHNICAL SUPPORT

PROVIDE QA COVERAGE FOR ENTIRE WORK PACKAGE BY A REGISTERED THIRD PARTY INSPECTING AGENCIES EX - LRS, IRS, ABS ETC.

SHIPYARD TO SUBMIT QAP AND QIP WITH IN 2 WEEKS OF SIGNING OF CONTRACT

PROVIDE WHARFAGE / WET BASIN FACILITIES (WITH 6M DEPTH AT ALL CONDITIONS) AS REQUIRED FOR COMPLETION OF WORK PACKAGE. DREDGING AS REQUIRED TO BE CARRIED OUT PRIOR TO COMMENCEMENT OF REFIT AT SHIPYARD'S COST. PAYMENT WILL BE RESTRICTED TO ACCEPTED PERIOD IN THE CONTRACT

PROVISION OF SHORE POWER 3 PHASE, 415V, 50HZ, FOR 60 DAYS IN DRY DOCK & FOR THE DURATION OF STAY FOR COMPLETE REFIT INCLUDING NECESSARY CONNECTION / DISCONNECTION (RATES AS PER ACTUAL READING ON BOARD/ENERGY METER READING INSTALLED BY SHIPYARD) POWER SUPPLY CABLE AND METER TO BE PROVIDED BY SHIPYARD. QUOTE FOR 1000 KWH/DAY PAYMENT AT ACTUALS AS PER FINAL READING. SHIPYARDS TO INSTALL POWER . SHIP SHOULD BE EARTHED AT 04 POINTS WHILE IN DRY DOCK. EARTHING CABLE TO BE SUPPLIED BY SHIPYARDMETER/ ENERGY METER IN SUPPLY LINE

PROVIDE 02 SEA WATER FIRE MAINS WITH 06 BAR PRESSURE FOR ENTIRE DURATION WITH CONTROL VALVES, MANIFOLDS AND INCLUDE NECESSARY CONNECTION / DISCONNECTION. SHIPYARD TO CONNECT REFERENCE PRESSURE GAUGE AT DISCHARGE LINE. CALIBERATION CERTIFICATE OF PRESSURE GAUGES TO BE SUBMITTED ON START OF REFIT

SHIPYARD IS TO ESTABLISH A SECURITY PERIMETER AROUND THE VESSEL WITHIN 2 SENTRIES ROUND THE CLOCK

CCTV RECORD (WITH NIGHT VISION) OF THE ENTIRE SHIP'S PERIMETER TO BE KEPT FOR LAST THIRTY DAYS

PROVIDE CRANE 5 TON CAPACITY DURING THE REFIT (FOR NAVY'S REQUIREMENT ONLY. SHIPYARD REQUIREMENTS ARE TO BE CATERED IN SEPERATELY) PAYMENT AT ACTUALS

SHIPYARD TO ARRANGE FOR DEFUELLING OF SHIP PRIOR TO COMMENCEMENT OF REFIT.

CLEANING OF ALL TANKS, VENTILLATION AND OBTAINING GAS FREE CERTIFICATE IS THE RESPONSIBILITY OF SHIPYARD.

SHIP YARD HAS TO STORE THE DEFUELLED LSHFHSD AND AVCAT IN SUITABLE PLACE AND REFUEL THE SAME BACK TO SHIP AT END OF REFIT AFTER GETTING SERVICABLE CERTIFICATE FROM IOCL. CATER FOR FRESH FUEL IN CASE DEFUELLED LSHFHDS/ AVCAT GOT CONTAMINATED.

PROVIDE 08 FIRE FIGHTING TRAINED HOT WORK SENTRIES WITH 02 SUPERVISORS FOR 16 HRS EACH DAY FOR THE DURATION OF REFIT.NUMBER OF SENTRIES REQUIRED WILL BE INTIMATED BASED ON SHIP YARD'S REQUISITION FOR HOT WORK RECEIVED THE PREVIOUS DAY. PAYMENT AT ACTUALS

TEMPORARY LIGHTING AND VENTILLATION ONBOARD FOR THE ENTIRE DURATION OF REFIT TO BE PROVIDED IN ALL MACHINERY COMPARTMENTS, COMPARTMENTS WITHIN SUPERSTRUCTURE, ALL ALLEYWAYS/ PASSAGE WAYS, CARGO SPACE, BALLAST TANKSMUST BE WELL LIT WITH 24 VDC LAMPS. PROVISION OF MAXIMUM 20 LIGHT POINTS PER DAY. PAYMENT AT ACTUALS. PROVISION OF 05 PORTABLE INTAKE/ EXHAUST BLOWERS OF MINIMUM 02 KW RATING WITH ADEQUATE HOSING ARRANGEMENT. ARRANGEMENT ON AS REQUIRED BASIS. PAYMENT AT ACTUALS.

SHIPYARD TO ENSURE MOVEMENT OF STEEL FROM MO (KOC) / NSRY (KOC) TO SHIPYARD INCLUDING LOADING / UNLOADING, MANPOWER(04 PERSONNEL), TRAILOR, CRANE(02) AND FORK LIFT. PAYMENT AT ACTUALS

GENERAL & ADMIN SERVICES

STATIONARY IS TO BE PROVIDED FOR SMOOTH FUNCTIONING OF RMT OFFICE OF NSRY FOR RS 10,000/- PER MONTH

PROVIDE 01 IN NO "REFIT COORDINATOR" [PREFERABLY RETIRED IN SENIOR SAILORS (ERA/EAP)]. ALTERNATELY, PERSONAL WITH MINIMUM B. TECH (MECH/ELECTRICAL/ ELECTRONICS/NAVAL ARCHITECTURE) WITH MINIMUM EXPERIENCE OF 05 YEARS IN SHIP REPAIR FIELD. SALARY TO MATCH WITH SHIPYARD ASSISTANT MANAGER LEVEL. ADDITIONAL DAYS ARE INCLUDED FOR PRE & POST REPAIR/REFIT COORDINATION/ PLANNING ACTIVITIES. REQUIRED TO WORK IN TOUGH ENVIROMENT ONBOARD DURING VARIOUS REPAIRS/TRIALS, ON SHIFT BASIS ROUND THE CLOCK, INCLUDING SUNDAY/HOLIDAY AS PER DEMAND OF THE REPAIR/REFIT.

PROVIDE 01 IN NUMBER "REFIT ACCOUNTANT-CUM-AUDITOR" WITH ATLEAST MCOM DEGREE AND HAVING ACCOUNTING AND AUDIT EXPERIENCE FOR COMPLEX SHIP REPAIR CONTRACTS AND MULTISTAGE BILLS. MINIMUM EXPERIENCE 05 YEARS. SALARY TO MATCH SHIPYARD DEPUTY/ ASSISTANT MANAGER LEVEL. ADDITIONAL DAYS ARE INCLUDED FOR PRE & POST CONTRACT REPAIR/REFIT, AUDIT & BILLING ACTIVITIES. REQUIRED TO WORK AT OFFICE AS WELL AS IN TOUGH ENVIROMENT ONBOARD DURING VARIOUS REPAIRS/TRIALS, ON SHIFT BASIS INCLUDING SUNDAY/HOLIDAY AS PER DEMAND OF THE REPAIR/REFIT.

BoQ_Ver3.1

PROVIDE 01 IN NO "REFIT COORDINATOR" [PREFERABLY RETIRED IN SENIOR SAILORS (ERA/EAP)]. ALTERNATELY, PERSONAL WITH MINIMUM B. TECH (MECH/ELECTRICAL/ ELECTRONICS/NAVAL ARCHITECTURE) WITH MINIMUM EXPERIENCE OF 05 YEARS IN SHIP REPAIR FIELD. SALARY TO MATCH WITH SHIPYARD ASSISTANT MANAGER LEVEL. ADDITIONAL DAYS ARE INCLUDED FOR PRE & POST REPAIR/REFIT COORDINATION/ PLANNING ACTIVITIES. REQUIRED TO WORK IN TOUGH ENVIROMENT ONBOARD DURING VARIOUS REPAIRS/TRIALS, ON SHIFT BASIS ROUND THE CLOCK, INCLUDING SUNDAY/HOLIDAY AS PER DEMAND OF THE REPAIR/REFIT.

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (SPARE LIST) (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

LIST OF SPARES TO BE QUOTED BY THE SHIPYARDS

ENGINEERING

MAIN ENGINES MAKE-CATERPILLAR MODEL -3512

MAIN ENGINES MAKE-CATERPILLAR MODEL -3512

DIESEL GENERATOR MAKE - CUMMINS 6CTA

PROPULSION VOITH SYSTEM

AIR COMPRESSOR MAKE ELGI

FUEL SAPERATOR MAKE ALFA LAVAL

FUEL SAPERATOR MAKE ALFA LAVAL

Clamp-Hose

Hose-Reducer

Clamp AS

Filter Element AS-Air

Seal-O-Ring

Clamp

Clamp

Clamp

Bellows AS

FUEL SAPERATOR MAKE ALFA LAVAL

PROPULSION VOITH SYSTEM

Bellows

FUEL SAPERATOR MAKE ALFA LAVAL

Seal-O-Ring

Seal-O-Ring

Clamp AS

Clamp AS

Gasket

Bolt-High Temperature

Cartridge GP-Turbocharger

Gasket-Exhaust

Cartridge GP-Turbocharger

Kit-Repair

Kit-Repair

Single Cylinder Head Install Kit

Single Cylinder Head Install Kit

Lock-Retainer

Guide-Valve

Valve-Exhaust

Valve-Exhaust

Spring

FUEL SAPERATOR MAKE ALFA LAVAL

Rotocoil AS

FUEL SAPERATOR MAKE ALFA LAVAL

FUEL SAPERATOR MAKE ALFA LAVAL

Seal-Valve Stem

FUEL SAPERATOR MAKE ALFA LAVAL

FUEL SAPERATOR MAKE ALFA LAVAL

FUEL SAPERATOR MAKE ALFA LAVAL

Washer

Insert-Valve Seat

Plate Spacer

Screen AS-Suction

Spring-Lifter Guide

Cap AS

Ring-Retaining

Receptacle AS-Connector

Receptacle AS-Connector

Retainer-Spring

Spring-Injector

FUEL SAPERATOR MAKE ALFA LAVAL

FUEL SAPERATOR MAKE ALFA LAVAL

Harness AS-Wiring

Button

FUEL SAPERATOR MAKE ALFA LAVAL

FUEL SAPERATOR MAKE ALFA LAVAL

Screw-Adjusting

Bushing

Socket-Arm

Seal-O-Ring

FUEL SAPERATOR MAKE ALFA LAVAL

Clamp AS

Seal-O-Ring

FUEL SAPERATOR MAKE ALFA LAVAL

FUEL SAPERATOR MAKE ALFA LAVAL

FUEL SAPERATOR MAKE ALFA LAVAL

FUEL SAPERATOR MAKE ALFA LAVAL

FUEL SAPERATOR MAKE ALFA LAVAL

Washer-Spring

Seal-O-Ring

Seal-O-Ring

Seal-O-Ring

Plate Spacer

Dowel-Hollow

FUEL SAPERATOR MAKE ALFA LAVAL

FUEL SAPERATOR MAKE ALFA LAVAL

FUEL SAPERATOR MAKE ALFA LAVAL

FUEL SAPERATOR MAKE ALFA LAVAL

FUEL SAPERATOR MAKE ALFA LAVAL

Seal-O-Ring

Plate Spacer

FUEL SAPERATOR MAKE ALFA LAVAL

Seal-O-Ring

FUEL SAPERATOR MAKE ALFA LAVAL

Collar

Liner

Plate AS

FUEL SAPERATOR MAKE ALFA LAVAL

Collar

Liner

Rod AS-Zinc

Retainer

FUEL SAPERATOR MAKE ALFA LAVAL

Rod AS-Zinc

Rod AS-Zinc

Regulator-Temperature

Seal-Lip Type

Seal-Lip Type

Gasket-Housing Cover

Filter Element-Fuel

FUEL SAPERATOR MAKE ALFA LAVAL

FUEL SAPERATOR MAKE ALFA LAVAL

FUEL SAPERATOR MAKE ALFA LAVAL

FUEL SAPERATOR MAKE ALFA LAVAL

Seal-Ring

Grommet

Tube AS

Seal-O-Ring

FUEL SAPERATOR MAKE ALFA LAVAL

Valve-Check

Connector-Port

MAIN ENGINES MAKE-CATERPILLAR MODEL -3512

MAIN ENGINES MAKE-CATERPILLAR MODEL -3512

MAIN ENGINES MAKE-CATERPILLAR MODEL -3512

Seal-Rectangular

FUEL SAPERATOR MAKE ALFA LAVAL

Injector GP-Fuel

FUEL SAPERATOR MAKE ALFA LAVAL

Seal-O-Ring

FUEL SAPERATOR MAKE ALFA LAVAL

Pump AS-Fuel Priming

FUEL SAPERATOR MAKE ALFA LAVAL

Seal-O-Ring

Kit-Repair

Pump GP-Fuel Transfer

FUEL SAPERATOR MAKE ALFA LAVAL

FUEL SAPERATOR MAKE ALFA LAVAL

FUEL SAPERATOR MAKE ALFA LAVAL

FUEL SAPERATOR MAKE ALFA LAVAL

FUEL SAPERATOR MAKE ALFA LAVAL

FUEL SAPERATOR MAKE ALFA LAVAL

Breather AS

Seal-O-Ring

Retainer-Spring

Hose-Tee

Filter Element AS-Engine Oil

Kit-Repair

Liner-Rotor

Seal-O-Ring

Clamp AS

FUEL SAPERATOR MAKE ALFA LAVAL

FUEL SAPERATOR MAKE ALFA LAVAL

FUEL SAPERATOR MAKE ALFA LAVAL

Valve-Bypass

Damper-Bolt

Shaft AS-Pump

Spool-Pressure Relief

Shaft AS-Pump Drive

After Cooler Kit

Oil Cooler Kit

Turbo Kit

Fuel Injector Kit

Water Pump Rebuild Kit

Water Pump Rebuild Kit

Water Pump Install Kit

Kit-Repair

Seal-O-Ring

12v Heavy Duty Battery

CAT DEO CI4 208 LTR

Seal-O-Ring

Seal-O-Ring

Seal-O-Ring

Sensor Speed

Planger

Starting Motor

Starting Motor

Valve Relay

Valve Kit

Valve Kit

Valve Relay

Control Gp Monitor

Harness As Control

Harness As Control

Control Gp Monitor

Adapter As

Control Gp Monitor

CLAMP,T BOLT

SEAL,O RING

HOSE,PLAIN

HOSE,PLAIN

HOSE,FLEXIBLE

VALVOLINE PREMIUM BLUE 7800 PLUS 1/20 LTR

ELEMENT,LUB OIL FILTER

KIT,HX40 TURBO REPAIR

ELEMENT,AIR CLEANER

Harness As Control

Harness As Control

HOSE,ELBOW

HOSE,FLEXIBLE

HOSE,HUMP

GASKET,SEA WATER PUMP

Control Gp Monitor

Control Gp Monitor

SEAL,RECTANGULAR RING

SEAL,ROCKER LEVER COVER

SEAL,INJECTOR

Valve Kit

DRAINCOCK

WASHER,SEALING

Control Gp Monitor

FILTER,FUEL

KIT,HX40 TURBO REPAIR

Control Gp Monitor

GASKET,INT MANIFOLD COVER

CLAMP,HOSE

Harness As Control

PLUG,ZINC ELECTRODE

RESISTOR,CORROSION

SEPARATOR,FUEL WATER

CAP,FILLER

GASKET,CONNECTION

COOLANT,EG 50:50 PREMIXED 50 LT DRUM

GAUGE,SIGHT

MANIFOLD,FUEL

ROD,PUSH

ROD,PUSH

ROD,PUSH

ROD,PUSH

ROD,PUSH

ROD,PUSH

CLAMP,V BAND

DAMPER,VIBRATION

INJECTOR

TAPPET,VALVE

TUBE,INJECTOR FUEL SUPPLY

TUBE,FUEL DRAIN

TENSIONER,BELT

KIT,WATER PUMP

MAIN SEAL

KIT,WATER PUMP

HYDRAULIC OIL FILTER

CONTROL RELAY