REPAIRS TO COMPOUND WALL FENCING AND HARD STANDING AND OTHER CONNECTED ITEMS REPAIRS TO SHOULDERS KERB STONE CULVERT AND SIGN BOARD AT MIL STN BHUJ. UNDER AOR OF AGE B R II OF GE(A) BHUJ AT MIL STN BHUJ

Amount

Demolition of concrete block masonry built in cement mortar or cement lime mortar

M&L for Pre-cast cement concrete block masonry (Type C1, 1:3:6, 20mm aggregate) with solid blocks, exc. 10cm in width and setting in cement mortar (1:6), complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth in soft/loose soil; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out

M&L plain cement concrete 1:4:8, Type D-2 (using 40mm graded aggregates) as in foundations, filling and mass concrete etc complete all as specified & as directed

Demolition of cement concrete of any description and in any position not otherwise specially provided for as in surface channel.

Dismantling of Chainlink wire fencing of any description and in any position complete.

Dismantling posts or struts (wood, steel or RCC) any section incl taking out embedded portion and making good disturbed ground (post embedded in natural ground)

----do---- all as per item No. 7 above but post embedded in PCC

Excavation in post hole for similar holes each n exc 0.50Cum getting out returning filling in and ramming earth around in layers nexc 25 cm watering and removed surplus soil to a distance nexc 50m and making good surface in soft/loose soil.

M & L for cement concrete 1:3:6 type C2 using (40mm graded stone aggregate) as in foundation filling mass concrete complete all as specified

S&F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flat iron fillets (for securing wire mesh/welded steel wire fabric etc) including all necessary drilling, bolting or riveting etc, and similar work conforming to Fe-290 Gde E-165.

S & F in repairs GI concertina coil, dia of wire not less than 2.50mm, coil dia not less than 600mm, zinc coating min 275 gm/RM, weight of coil not less than 1.40Kg/Rm including securing or tying with galvanised mild steel wire staples or steel pins, etc. complete all as specified and directed.

Taking down cement plaster on brick or stone wall including racking out joints, hacking for key scrubbing down with water etc complete all as specified & directed.

M&L rendering 10 mm thick in CM (1:4) on brick work or concrete surfaces mixed with water proofing compound incl chajja, facia etc, finished the surfaces even and smooth without using extra cement mixed with water proofing compound complete all as specified.( WPC measured separately)

M&L for applying two coats of cement base paint on new plastered surfaces of wall over a coat of primer complete all as specified and as directed.

Supply only integral water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed

M&L for PCC (1:2:4) type B-0 using 20mm graded crushed stone agg as in coping, benching, holdfast, fixing of fencing post above wall etc,finished even and smooth using extra cement incl necessary form work.

M&L for providing precast cement concrete louvres and jallies, 25mm thick (measured solid) type B0 1:2:4 using 12.5mm aggregate set in cement mortar 1:4, including all mouldings and demolition of old louvers and jallies complete all as specified and directed.

Supply only chainlink fencing any size any type etc complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire. complete all as specified and directed.

Restraining & re securing of mild steel barbed wire any type including making good staples etc

S & F galvanised two strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts incl securing or laying at crossing with and provision of mild steel wire staples or steel pins etc.

S & F of mild steel screw bolt (machine made with hexagonal or square head at one end and screwed the other or screwed both ends each screw and to be fitted with washer and one hexagonal or square nut length of bolt n exc 5cm and dia of shank 5 to 10 cm complete.

S & F 10 mm dia & over mild steel round or square bars fixed behind chain link fencing as straining bars etc and similar articles complete as specified.

M & L for preparation of new steel surfaces exc 10cm width or girth and apply one coats of synthetic enamel paint over a coat of red oxide primer complete.

M & L for preparation of new steel surfaces n exc 10cm width or girth and apply one coats of synthetic enamel paint over a coat of red oxide primer complete.

M&L for manufacturing of ornamental and decorative type steel gate with structural steel conforming to Fe 410-o or 310-O all as specified, revolving on bearing plate including pintal hinges fixed on pillar in PCC blocks of size as required as site , including all locking arrangement, all as per sample approved by the Engr-in-Charge and directed and fixed in position. Note :- 1. Steel gate shall be manufactured as per sample approved by the Engr-in-Charge . Photographs for the samples shall have to be collected by the contractor from the manufacturer of the gates in the area for approval of the Engr-in-charge. The cost of the same shall be deemed to be inclusive in unit rate accordingly.

M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid over 20mm thick screed layer in cement mortar 1:6 and pointed in white cement with pigment to match with colour of tile complete all as specified.

M&L Granite (of any type) tiles 20mm thick machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete laid over 10mm thick screed layer in cement mortar 1:4

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces with smart painting tools complete all as specified and directed.

Dismantiling of stone slabs and tiles (Kota/ Granite stone etc.) of any discription or any thickness in floors, aprons, skirting, dado etc. laid bedded and pointed in any mortar

M&L for providing precast cement concrete type B1 1:2:4 (20 mm graded aggregate) in apex stone/kerb stone with plain fair faces including chamfers, weathering throating etc and set in CM 1:4 complete with joints, size and shape as approved by Engr-in-charge

M&L for exterior grade, coloured, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc. complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 20mm thick in CM 1:6 for laying floor finishes complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc

M&L providing precast cement concrete rubber moulded coloured interlocking tiles with grey cement and pigment conforming to IS-15658-2006 of 80 mm thick (M-40 grade) of approved design and pattern complete all as specified and directed by Engr-in-Charge

M&L for 60 mm thick paver blocks rubber moulded PCC M-35 with grey cement and pigment conforming to IS-15658-2006 of approved design and pattern complete all as specified and directed by Engr-in-Charge.

M&L for cutting of Bitumenous road edges to achieve straight/vertical edges to accommodate paver blocks/PCC subbase/sand Cushining etc complete all as specified and directed.

M&L PCC 1:2:4 type B1 using 20mm graded stone aggregate for filling of gap between road, kerbs stone and interlocking paver block with finished fair all as speificed and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in as in sub base all as specified and directed.

M&L for 100 mm thick PCC 1:2:4 type B2, (using 40 mm graded stone aggregate) as in floors/paving finish even and smooth without using extra cement . complete all as specified.

M&L for forming expansion joints,12 mm thick in concrete slab of thickness of 100 mm and filled with preformed bituminous filler and top 30 mm primed with sealing compound Grade A. complete all as specified and directed.

M&L for Sand filling under floors or in foundation incl watering and consolidation for laying interlocking tiles.

M&L for providing precast cement concrete type B1 1:2:4 (20 mm graded aggregate) in apex stone/kerb stone with plain fair faces including chamfers, weathering throating etc and set in CM 1:4 complete with joints, size and shape as approved by Engr-in-charge

M&L for precast RCC 1:2:4 type B-1 as in cover slab or similar works set & jointed in CM 1:4 complete including necessary formwork all as specified and directed.

M&L providing precast cement concrete rubber moulded coloured interlocking tiles with grey cement and pigment conforming to IS-15658-2006 of 80 mm thick (M-40 grade) of approved design and pattern complete all as specified and directed by Engr-in-Charge

M&L PCC 1:2:4 type B1 using 20mm graded stone aggregate for filling of gap between road, kerbs stone and interlocking paver block with finished fair all as speificed and directed.

M&L for forming contraction (Dummy) joints 65 mm deep x 10 mm wide filling with sealing compound grade A

M&L for aggregate for loose filling, of gauge 20 mm to 60 mm graded Spreading and levelling in layers n exc. 10cm thick.

Excavating all filled and accumulated earth, rubbish, foreign material from the drain including removing excavated material n.exc 100m and depositing where directed at a level n.exc 1.5 above the starting point all as specified and as directed

Supply only integral water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed

M&L for preparation of new concrete surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer all as specified and directed.

M&L for preparation of old painted concrete surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10 cm width or girth and applying one coats of synthetic enameled paint complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of walls & applying three coat of white wash wall complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.

S&F mild steel rolled sections as in main and cross beams, hip and jack rafters; purlins post, where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 290 Gde E-165 complete as specified

S&F mild steel rolled section as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc etc conforming to Fe 410 -W (GdeE- 250) quality A Fe complete all as specified

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc.

S & F for Acrylic LED light Sign/Display board consisting of following: (i) 45mm dia MS square hollow pipe for framing embeded in cement concrete and making good. (ii) 0.5mm thick prepainted coloured galvanised steel sheet for cladding (colour approved byEngr-in-Charge). (iii) Lettrs/Symbol made up of 2.5mm thick acrylic sheet of appropriate size, colour and design as approved by GE. (iv) LED lights for Lettrs/Symbol of desired capacity and colour as approved by GE. Note : (a) Length x Height of board for 100mm wide will be decided by GE. (b) All kind of required electric work like wiring, tapping, etc upto plug point included. (c) Two coat of synthetic enamal paint over a coat of primer for all Mild Steel work included.

M&L for cutting/chipping off carefully the cracks of PCC/QPC (hard concrete surfaces) in uniform width of cross sectional area with depth of 2cm by diamond cutter, cleaning all dust,, mud etc. Priming the cut portion of concrete surfaces with Flexopatch of Make : M/s Chowksy Chemical P Ltd or other equvlent make as approved by GE, and filling the cut portions of cracks to the required level to match with exisitng surfaces of concrete slab/ pavement with flexopatch mortar complete all as specified and directed by manufartre instruction and directed by EIC.

NOTE APPLICABLE FOR ALL ITEMS :- If rate quoted for similar/identical items in same part of Sch ‘A’ is at variance, the lowest rate quoted shall only be considered for payment to the contractor.

M/s Bombay Novelty Stores