Providing and Fixing of submersible Pumping machinery 5.00 HP along with allied accessories under JSV Section Garh

Supplying & Fixing of submersible pumping set of standered make such as Kirloskar / KSB/ Cromption/ CRI confirming to ISI code 5659-1970 latest suitable for lifting raw water (latest with up to date ammendments) fitted with. The pump should be capable of handling 20 meter head with (+)10% and (-) 15% head range and it should be oprationable with 440 volts three phase AC Supply. The pump set should be capable of following performance :-

Total Discharge required= 10.00 LPS

Total Head = 15 mtrs

Type of water = clear water from clear wate tank

HP Motor =5.0 HP

Dia of Risising main=65 mm dia

Providing and Fixing PVC insulated jointless flat water proof copper cable of 6.0 mm2 of Finolex/ L & T/ KSB/ Gloster make confirming to BIS 1554 (part-I) –1988 or latest with upto date amendments of suitable size for the pump sets offered (one cable carrying all three phases) including all other electrical equipment/ accessories such as thimbles, flexible pipe, solder, nuts and bolts, cable glands, etc. laid in pipes or trenches under floor. The type, size and make will be subject to approval of HPSEB authorities. In case of non acceptance by HPSEB authorities it shall have to be replaced by the tenderer free of cost .

Providing and Fixing column assembly of GI/MSERW pipes of suitable size for suction delivery and common header considering site requirements and NPSH required/ avaiable.The pipe sizes for suction and delivery shall as per the requirement of offered pump (to be given by the tendrers) and common header shall be equal to dia of rising main including tapers, flanges, bends, rubber gaskets, 3 mm thick nuts and bolts and special up to 5 metre away from the outer wall of pump house as per layout drawing approved by Engineer-in-charge. The pipes material shall confirm to relevant BIS codes and capable of with standing field test pressure equal to 1.5 times the operating pressure. The complete arrangement shall comprise of:- a) Suction pipe 65mm dia b) Delivery pipe (c) common header 65mm dia of 15 mtrs length.

Providing & Fixing of digital starter panel having Ampare meter, voltmeter, MCB Switch etc. of standard make such as C & S/ KSB/ Siemen make confirming to BIS 8544-1979 latest with up to date ammendments for 5.00 HP submersible pump set on panel board with megnatic type over load release and dashpot time lag under voltage release complete in all respect as per direction of Engineer in charge with in all leads and lifts. .

Errection of all equipments from Sr. No. 1 to 5 including cost of tee, bends, taper, nuts and any other fitting required complete in all as per the direction of Engineer in charge.