Pedestrianization, Heritage preservation and Re-development Project from Old Motor Stand to Gol bazar through Kaman Chowmohani via Central Road to Ujjayanta Palace under the scheme for Special Assistant to States for Capital Investment 2024-25.

Amount

Bill No. I: Civil Works Dismantling & Demolishing Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding whenever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and upto a lead of 1000 m as per MoRT&H Technical Specification Clause 202. Dismantling Lime / cement Concrete I. By Manual Means A) Cement Concrete M-15 & M-20

B) Prestressed / Reinforced Cement Concrete grade M-20 & above

II. By Mechanical Means A) Cement Concrete grade M-15 & M-20

B) Prestressed / Reinforced Cement Concrete grade M-20 & above

Dismantling brick / tile work A) In lime mortar

B) In cement mortar

D) Dry Brick Pitching or Brick Soling

Scraping Plaster in Lime or Cement Mortar from Brick / Stone Masonry

Dismantling of Flexible Pavements Dismantling of flexible pavements and disposal of dismantled materials with all lifts and upto a lead of 100 m, stacking serviceable materials and unserviceable materials separately as per MoRT&H Technical Specification Clause 202. II ) By Mechanical Means A ) Bituminous Courses

Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

Dismantling of Kerb Stones by manual means and disposal of dismantled material with all lifts and upto a lead of 1000 m as per MoRT&H Technical Specification Clause 202.

Dismantling old plaster or pointing, raking out joints, cleaning and preparing the surface for re-plastering or re-pointing including disposal of rubbish to the dumping ground with all leads and lifts etc.complete as per direction of the Engineer- in-charge.

Bill No. II: Earthwork Excavation for Structures A. Without dewatering. Earthwork in excavation for structures as per drawing and MoRD technical specifications Clause 305.1 including setting out, construction of shoring & bracing, removal of stumps & other deleterious material and disposal upto a lead of 50 m, dressing of sides & bottom and backfilling in trenches with excavated suitable material. I. Ordinary Soil (i) Upto 3 m depth

Filling in foundation trenches as per drawing & MoRD technical specification Clause 305.3.9, 1200. I Sand filling

II Earth filling (For marshy soil)

Bill No. III: Cement Concrete Work Providing concrete for plain/reinforced concrete in open foundations complete including formwork as per drawings & MoRD technical specifications Clauses 802, 803, 900, 1202 and 1203. (including centering, shuttering, staging etc. but excluding reinforcement). II P.C.C grade M 15 Nominal mix (1:2.5:5)

Bill No. IV: Brick Work Brick masonry work in cement mortar in foundation completed excluding pointing & plastering as per drawing & MoRD technical specifications Clauses 600, 1202 & 1203. III Brick masonry in 1:4 cement mortar

Bill No. V: Half Brick Work Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete:- In cement mortar 1:4 ( 1 cement : 4 fine sand ).

Bill No. VI: Plastering Work 12 mm cement plaster of mix Cement mortar 1:4 (1 cement : 4 fine sand)

Bill No. VII: Reinforced Cement Concrete Work Providing & laying reinforced cement concrete in superstructure as per drawings & MoRD technical specifications Clauses 800, 900, 1205.4 & 1205.5 (including centering, shuttering, staging etc. but excluding reinforcement). (I) R.C.C grade M 20 (ii) For nominal mix 1:2:4 (Hand mixed) 1. For height upto 5 m

Bill No. VIII: Steel Work Supplying, fitting & placing Thermo-Mechanically treated bar/ Cold twisted deformed steel bar reinforcement in foundation complete as per drawings & MoRD technical specifications Clauses 1000 & 1202.

Bill No. IX: Rolling Shutter Work Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 275mm long wire springs grade No.2 and M.S. top cover of required thickness for rolling shutters & with handles, hold fast including embedding in cement concrete of required grade required for fixing in position, all necessary fittings, including applying of approved steel primer etc. complete as required:- 80xl.25mm M.S. laths with 1.25 mm thick top cover.

Providing and fixing ball bearing for rolling shutters (exceeding 10 sqm area) of approved make complete as required.

Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. complete as required:- In grating, frames, guard bar, railing, brackets, gates and similar works, all complete.

Providing weep holes in brick masonry/ stone masonry, plain/ reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe or uPVC pipe (110 mm OD of 6.0 Kg/cm2 pressure) extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and MoRT&H technical specification clauses 2706, 2200.

Bill No. X: Finishing Work Painting Two Coats on New Concrete Surfaces Painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces as per drawing and MoRD Technical Specification clause 1701.

Painting on Steel Surfaces Providing and applying two coats of ready mix paint including primer coat of approved brand on steel surface after through cleaning of surface to give an even shade as per drawing and MoRD Technical Specification Clause 1701

Dustbin supply and installation of dustbin shall be of ground-anchored type, fixed on poles, with a mounting configuration of two bins supported on three poles, each having a capacity of 100 liters; the container shall be made of LLDP, the support structure/poles shall be of mild steel as per IS 2062 with powder-coated finish, the bin walls shall be solid and non-perforated

Dustbin supply and installation ofThe Stainless Steel Round Open Top Dustbin with Roof, having a capacity of 50 liters, is designed for durability, hygiene, and ease of use in both indoor and outdoor spaces. Made from high-grade stainless steel, it is corrosion-resistant, rustproof, and easy to clean, ensuring long service life with minimal maintenance. The round design with an open top allows convenient disposal, while the roof cover prevents rainwater entry and controls odor. Its smooth finish and sturdy construction make it suitable for offices, malls, hospitals, public places, and residential areas. This dustbin combines functionality with an elegant appearance for modern waste management.

Supply and installation FRP Square Manhole Cover with frame, size 300 mm × 300 mm, is manufactured from high-quality Fiber Reinforced Plastic using polyester resin and glass fiber reinforcement. It is lightweight, durable, corrosion-resistant, weatherproof, and UV stabilized, making it suitable for long-term use. Available in load-bearing capacities from light duty (2.5–5 tons) to heavy duty (20 tons+), it is ideal for sewerage, drainage, electrical, and telecom chambers. The cover features an anti-slip checkered surface and is non-brittle and non-conductive, ensuring safety and reliability. Frames are made of matching FRP with optional steel reinforcement, and watertight options are also available on request.

Precasting and placing in position 125 mm dia Bollards 600 mm high of required shape including providing M.S. Pipe Sleeve 50 mm dia 300 mm long in the Bollard and M.S. Pipes 40 mm dia and 450 mm long with 150x150x6mm M.S. plate welded at bottom and embedded 150mm in cement concrete 1:3:6 (1cement:3fine sand:6graded stone aggregate 20 mm nomonal size) including necessary excavation of size 250x250x450 mm deep for the same in bitumen/concrete pavement at specified spacing. 1:2:4 ( 1 Cement: 2 fine sand : 4 graded stone aggregate 12 mm nominal size)

Neat cement punning

40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement motar 1:5 (1 cement : 5 coarse sand), including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone. Red sand stone

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 fine sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 18 mm thick stone slab

Providing and fixing Kota stone in floors over 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with ordinary cement slurry including pointing with ordinary cement mixed with pigment of matching shade, including rubbing and polishing etc. all complete as per direction of Engineer-in-charge. Kota stone slab 25mm thick

Providing and fixing Precast chequered cement concrete tiles 18 mm thick, laid in footpath & courtyard, on 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with neat cement slurry including rubbing and cleaning etc. all complete as per direction of Engineer-in-charge. In dark shade using ordinary cement

Providing and laying factory made chamfered edge Cement Concrete paver blocks of required strength, thickness & size/ shape, made by table vibratory method to attain superior smooth finish using PU or equivalent moulds, laid in required grey colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. all complete as per specifications & approval/ direction of the Engineer -in-Charge: (a) 80 mm thick c.c. paver block of M-35 grade with approved colour, design and pattern.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete inposition to the required line, level and curvature jointed with cement mortar 1:3 (1 cement : 3 sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-Charge (length of finished kerb edging shall be measured for payment). (Precast c.c. kerb stone shall be approved by Engineer-in-Charge).

Providing and laying 1st class quality vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 - 2017, of approved make, in all colours and shades, laid over 20mm thick cement mortar 1:4 (1 cement : 4 fine sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. all complete as per direction of the Engineer-in-charge.. Double charged Stainfree vitrified tiles (Glossy) Size of tile 600 mm x 600 mm

Providing and fixing tactiles of standardized designs conforming to RNIB (The Royal National Institute for the Blind, UK), DETR (Department of the Environment, Transport and the Regions, UK) & ADA (Americans with Disabilities Act, USA) of size 300 x 300 mm in floors, (thickness to be specified by the manufacturer) specially designed to assist the visually impaired - “foot braille”, with water absorption less than 0.5%, of approved brand & manufacturer, laid on 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) including grouting of joints etc. all complete as per direction of Engineer-incharge. (Payment for grouting of joints to be made separately)

Bill No. XI: Electrical Work Wiring for Circuit/Sub-main with the following sizes PVC insulated Copper conductor cable (FR) in PVC conduit (medium gauge) recessed in slab/ wall etc. as required:- 2 X 2.5 + 1 X 1.5 sq mm

aluminium conductor armoured cable with necessary connection etc as required:- 2 core 4 Sq mm

aluminium conductor armoured cable with necessary connection etc as required:- 4 core 4 Sq mm

Supplying & installation of 10 KA breaking capacity, B/C curve MCB of following ratings in the existing MCB DB including connection as required:- 6 to 32 amps SP MCB:-

Supplying & installation of 10 KA breaking capacity, B/C curve MCB of following ratings in the existing MCB DB including connection as required:- 6 to 32 amps TP MCB:-

Supplying & installation of 10 KA breaking capacity, B/C curve MCB of following ratings in the existing MCB DB including connection as required:- 40/50/63 amps FP MCB:-

Supplying and installation of powder coated steel sheet enclosure (MCB DB) suitable for 240/415 volts MCB/Isolator/RCCB (SP/SPN/DP/TP/TPN/FP) complete with necessary bus bar, neutral link, din rail, earth bar etc i/c connection as required:- (2+10) / 12 way SPN MCB DB (double door)

Supplying and installation of powder coated steel sheet enclosure (MCB DB) suitable for 240/415 volts MCB/Isolator/RCCB (SP/SPN/DP/TP/TPN/FP) complete with necessary bus bar, neutral link, din rail, earth bar etc i/c connection as required:- 8 way horizontal TPN MCB DB (Double door)

HDPE pipes 90 mm dia

CCTV SYSTEM Supplying, installation, testing and commissioning of IP based CCTV system for building security comprising of PTZ / fixed camera, cabling, recording, display system and hard ware software support – For external surveillance a)PT-NC340P1-N (D2)(4MM) 4 MP IP Bullet,30 MTR IR

b)NVR 32 Ch 2 SATA AI Sense

c)BE55D,Smart 4K/ UHD,OTT and web browser built inn 16x7 Warranty 3 years full on site Installation free with kit Installation free with kit ( 55 Inch TV )

d)8 Port Poe Switch

e)Cat6 Cable armourd outdoor

f)Fiber Cable

g)4 TB (HDD)

h)SFP Madul

i)LC-LC Fiber Patch Cord 1.5 MTR

j)Installation charges

Supply & Installation of Decorative MS Lighting Pole with Dual Arm (5 mtr)

Supply & Installation of Decorative Light Fittings (100 Watt) (Phillips Model No. BGP564 LED140 NW 230V TA SPD)

Outdoor LED Display Screen (10ft X 3ft)

Bill No. XII: Horticulture Work Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m. All kinds of soil

Spreading of sludge/ farm yard manure/ good earth in required thickness (cost of sludge, farm yard manure or/ and good earth to be paid for separately) MoRT&H technical specifications Clauses 307.

Grassing with 'Doobs' grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for moving including supplying good earth if needed as per MoRT&H technical specifications Clauses 307. ii. In rows 75 mm apart in all direction

Planting flowering plants and shrubs in central verge (200 plants and 800 shrubs in two rows in 1 km length of road where width of verge is 3 m and above) as per MoRTH Technical Specification Clause: 307

Maintenance of flowering plants and shrubs in central verge for one year

Planting of trees by the road side (avenue trees) in 0.60 m diameter holes, 1.0 m deep, dug in the ground, mixing the soil with decayed farm yard / sludge manure, planting the saplings, backfilling the trench, watering, fixing the tree guard and maintaining the plants for one year

Bill No. XIII:Operation and Maintenance cost of Five Year including DLP period. As per scope of work mentioned in Special condition of DNIeT.Bill will be pay equally in 60 months.