REPAIR/MAINTENANCE OF WORN OUT DEFECTIVE STARTER, REPLACE THE FILTER MEDIA OF TEMPLE VIEW FILTRATION PLANT , WATER LEVEL INDICATOR,LT DISTRIBUTION, APFC AND AMF PANEL AND OTHER MISC WORKS AT AF STN BHUJ

Amount

S & F in replacement Microcontroller three phase (3ct sencing) APFC relay IPFC CS 1003, 8 steps incl LCD type with dual colour backlight aux supply 90-550 VAC configure alarm settings, supports intelligent algorithm, alarm indoication on display, programmable fan control, Dual password protection, automatic CTpolarity detection, NTC temp sensor, Power factor measurment range:0.8 lag to 0.8 lead & Automatically switches between various capacitive bank complete all as specified and directed. Make: Havell's or equivalent of make Siemens / Schneider / L&T

S & F in replacement Capacitor duty Contactor with auxilliary contacts 1NO+1NC, 3 pole AC, cat part no. J101211 & 12 Amps capacity all as specified and directed.Make: Indoasian Cat Part No-J101211 or equivalant make of L&T / Havells.

S & F in replacement heavy duty capacitors of size 3 PH1 KVAr for non linear load 440 Volts AC, 3 phase, 50 Hz delta connection for APFC panel.Make-Havell's cat part No.QHHTCC5001X0 or equivalent L&T / Siemens.

All as per item No.26 above but capacitors of size 3 PH2 KVAr Make-Havell's cat part No.QHHTCC5002X0 or equivalent L&T / Siemens.

All as per item No.26 above but capacitors of size 3 PH3 KVAr Make-Havell's cat part No.QHHTCC5003X0 or equivalent L&T / Siemens.

All as per item No.26 above but capacitors of size 3 PH5 KVAr Make-Havell's cat part No.QHHTCC5005X0 or equivalent L&T / Siemens.

Supply & fix in replacement of 150W MH flood LED flood light-High Lumen output fitting of 100 Watt with exclusive innivative designed, long life versatile pressure die cast aluminium IP65 flood light luminaire with high power LED as light source complete all as specified and directed by Engineer-in-Charge.Make-Havells Cat part no-JETAIRISFLS100WLED757ASYMLTG or equivalant as approved by GE of crompton/Philips/Wipro/CG.

S & F in replacement Aviation obstruction light, LED Base Cat Part No Bajaj BGAV 302 LED single emitter type on over head tank of 18 mtr staging complete all as specified and directed by engineer-in-charge Make : Kalin or equivalent

Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes pier holes etc not exc. 10sqm on plan and not exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed by Engineer-in-Charge.

Returning filling in soil and including spreading leveling watering and well ramming in layers n.exc. 25 cm thick complete all as specified and directed.

Removing excavated soil to a distance n.exc. 50 mtr and depositing where directed at a level n.exc. 1.5m above the starting points complete all as specified and directed.

M&L for sand cushioning for UG cables using dry river sand; gently punning down all as directed and specified. ( Note : For measurement purpose punned thickness shall be considered)

M & L unreinforced precast concrete cable covers CLASS LV type II, flat size 300 x 180 x 40 mm laid transverse to cable.

Taking out unserviceable LT cables from excavated trenches, ducts, wall, pole etc including removing cable covers, sand, cable joints, pipes, clamps etc, taking out old serviceable cables, cable covers, etc for reuse and removing unserviceable cables, covers etc, for the following sizes of cables :-

LT cables 16 Sqmm, 4 core.

LT cables 25 Sqmm, 3.5 core.

LT cables 50 Sqmm, 3.5 core.

LT cables 95 Sqmm, 3.5 core.

LT cables 120 Sqmm, 3.5 core.

Relaying serviceable cables in trenches, ducts, on wall, pole etc after testing of retrieved cable by megger complete all as directed for following sizes of cables :-

LT cables 16 Sqmm, 4 core.

LT cables 25 Sqmm, 3.5 core.

LT cables 50 Sqmm, 3.5 core.

LT cables 95 Sqmm, 3.5 core.

LT cables 120 Sqmm, 3.5 core.

Supply & Fix in replacement,connecting,testing and commissioning and jointing,LT under ground cable 1100 volts grade,XLPE insulated,armoured with galvanized round steel wire or steel strip, electric power cables heavy duty, with multi stranded aluminum conductor, laid in trenches,ducts,fixed on poles/walls with proper size saddles and clamp laid under roads /path /drain /culverts or encased in GI pipe fixed & testing and commissioning complete all as specified and as directed by the Engineer-in-Charge of following Sizes:- Note:- (i) Sand cushioning, Cable protection cover, GI pipes, excavation and earth work shall be measured and paid for separately under respective items of Schedule "A" .

LT cables 16 Sqmm, 3.5 core.

LT cables 25 Sqmm, 3.5 core.

LT cables 50 Sqmm, 3.5 core.

LT cables 95 Sqmm, 3.5 core.

LT cables 120 Sqmm, 3.5 core.

M&L for straight through joint (epoxy) for LT 1100 Volts grade, aluminum conductor including jointing kits, aluminium ferrules and labour complete for making joints and testing (Make :- M seal/3M /Denson) complete for : -

Cable size 120 to 150 Sqmm, 3.5 core

Cable size 70 to 95 Sqmm, 3.5 core

Cable size upto 50 Sqmm, 3.5 core

S & F in replacement MCCB's,415 Volts , 4 pole with Fix / adjustable type having following capacities :- (Make:-Schneider or equivalent in Havells / L& T / ABB)

MCCB 4 Pole, 415 V, fixed type, 63 to 100 Amps with breaking capacity 16 KA

MCCB 4 Pole, 415 V, Fix type, 125 Amps with breaking capacity 25 KA

MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA

MCCB 4 Pole, 415 V, Adjustable type, 200 Amps with breaking capacity 36 KA

MCCB 4 Pole, 415 V, Adjustable type, 250 Amps with breaking capacity 36 KA

MCCB 4 Pole, 415 V, Adjustable type,400 Amps with breaking capacity 36 KA

Supply & Fix in replacement of Automatic / Manual with inbuilt Time delay Transfer Switch 100 Amps four pole (with Enclosure) with connections of Auto / Manual Transfer Switch including Testing all as directed. Cat Part No. IHYFCDO100 Make:Havell’s or equivalant as approved by GE.

S&F in replacement Copper strip of size 20 x 3.15 with saddles and fixing screws etc to the earthing strip roof/down conductor above ground including jointing with rivets/ brazing icluding PVC sleeve throughout the strip etc all as directed by engineer-in-charge complete.

S & F in replacement air termination single pointed aluminium rod 12mm dia ,300mm complete all as directed by Engineer-in-charge.

S&F in replacement Test Point terminal box made out of Gun Metal or Phosporous Bronze / copper of size 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25mm long hexagonal head copper screws, etc complete all as specified and as directed by Enginner-in- charge.

M&L for Earthing complete with copper plate 60×60cm × 3.15mm thick electrode buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to 20×3mm copper strip as earthing lead by means of bolts, nuts, check nuts and washers and providing galvanised iron or steel 15 mm bore galvanised iron medium grade watering pipe, 40 mm bore galvanised iron light grade pipe for earth strip protection, including all excavation earth work in any type of strata, PCC 1:3:6 type C1 for chamber of internal size 300 mm x 300 x 300 mm with 120 mm thick wall and 700 mm x 700 mm x 150 mm thick bed concrete, RCC 1:2:4,type B1, reinforced with welded steel wire fabric or XPM jali (weight not less than 4.00Kg/Sqm) with cast iron frame, funnel with wire mesh, test point etc complete all as specified and directed.all as shown in electrical plate No. 5 of SSR-2009 connected to earthing test point all as specified or indicated including testing on completion. Note: (i) Earth strip and GI protection pipe up to length 7.5m shall deemed to be included in rate of above item. (ii) The earth resistance value shall be less than 1 Ohm. Failing to achieve the value contractor shall re-do without any extra cost.

M&L for earthing complete with galvanised steel earth plate electrode 60cmx60cm x 6 mm thick buried directly in ground vertically to depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level connected to and including GI strip 25x4mm as earth lead up to 7.5 mtr length by means of bolts, nuts check muts and washers etc. of galvanised iron or steel all as shown in electrical plate No. 3 including provn of GI protection pipe light grade of 32mm bore upto 7.5m length and connected earth strip to earthing test point all as shown in electrical plate No. 3 of SSR Part - I 2009 and as specified or indicated and testing on completion including necessary excavation & earthwork in any type of soil, PCC (1:3:6) type C1 chamber, precast slab 50mm thick in cement concrete (1:2:4)type B1 (rein forced with welded steel wire fabric (XPM) of weight not less than 4kg/sqm) with frame, funnel with watering pipe of 20mm bore medium grade, wire mesh and lugs test point etc.

Opening of gravity type sand filter installed at Temple view pump house; taking out carefully different sizes of filter media completely; cleaning the filter walls, pipes and other accessories with wire brush & bleaching powder and cleaning thoroughly with clean water; applying two coats of white wash on inside walls of sand filter bed; replacing the filter media carefully; assembling complete unit and testing, complete all as directed. (Note : Supply only filter media i.e. pebbles and filter sand will be measured and paid separately under respective item.)

Opening of RO plant installed at 27Wg & 308 TRU pump house; taking out carefully different sizes of filter media completely; cleaning the iron removal plant walls, pipes and other accessories with wire brush & bleaching powder and cleaning thoroughly with clean water; applying of two coats of white/black paint on inside walls of sand filter bed; M&L for replacing the filter media carefully; reassembling complete unit and testing complete all as directed.

Supply only multi grade gravel and sand for gravity type sand filter comprising of sizes as under :-

Gravel 50 - 40 mm ( for lowermost layer for bottom Thickness of layer 150mm)

Gravel 40 - 20 mm (For second layer of thickness 70mm )

Gravel 20 - 10 mm (For third layer of thickness 70mm)

Gravel 10 - 5 mm (For fourth layer of thickness 60mm)

Gravel 5 - 2 mm ( For uppermost gravel layer of thickness 50mm)

Effective size of sand - 0.45 - 0.7mm (For top layer 600mm thick ; Uniformity coefficient of sand 1.3 - 1.7mm )

Taking out PVC angle flock modules from tank; cleaning the surfaces of the tank and PVC angle flock modules with the help of wire brush & bleaching powder and cleaning throughly with clean water; applying 2 coats of white wash on inside surfaces of the tank walls; replacing any broken PVC modules and tieing them with copper wire, placing the module as back into the tank as per existing setup; Size of the tank Apprx. 3.6 x 2.8 mtr . and No of tanks = 2

All as per item No 28.00 above but tube Modules (Note for item No. 12 & 13 : Supply only PVC angle flock & PVC tube will be measured and paid separately under respective items of schedule.)

Supply only PVC angle flock of size 50MM x 50MM and 1.50MM thick as per existing colour.

Supply only PVC square tube of size 0.05M x 0.05M and 1.50 mm thick as per existing colour .

Supply , fixing and testing electronic chemical dosing (pump) unit electrically operated suitable for sodium hypo solution self primary dosing range 500 ML/Hr to 5000 ML/Hr all as specified and directed by Engr-in-Charge Make :- Ion Exchange/Initiative Engg or equivalent as approved by GE.

Supply and fix in replacement Digital water level indicator,display unitin red 7 segment LED display 4 digit of sumps and OH reservoirs Make- Sweta Engineering Broda or As approved by GE

Supply and fix in replacement level indicator sensor to be installed on top of the tank measure distance upto 7 mtr water depth all as directed by engineer-in-charge.

Supply and fix in replacement PVC pipe of size 90mm and 32mm pipe for fitting of sensor on tank as per the deoth of the tank all as directed by engineer-in-charge.

Supply and fix in replacement copper cable of size 3 core 1.5 sqmm to inter connect sensor on tank and indicator all as directed by engineer-in-charge. Make Finolex/Havels or equivalent

S&F in repair 4 core 1.5 sqmm armoured cable with copper conductor complete. Make: Polycab / Primecab / Finolex

Fabrication supply & fix MS clamps ( including excavation and earth work) made out of MS sheet 3mm thick, cut to size and bent to shape to cover the 250mm dia AC pipe externally in two pieces of 30cm length, welded to angle iron of size 40x40x6mm on two sides lenght wise with 3 holes each for clamping bolts, nuts & washers 12mm dia 10mm long, to cover the multiple perforation caused on the AC pipe, alongwith ruber gasket of size 6mm thick, 60cm long and 20cm wide for arresting the leakages

S&F in replacement CI Footvalve 80mm dia for UG SUMP all as directed by Engineer-in Charge.

S&F in replacement CI Footvalve 50mm dia for suction sweeper all as directed by Engineer-in Charge.

S&F in replacement Wooden Brush 15cm X 90 CM for suction sweeper all as directed by Engineer-in Charge.

Material and Labour for supply, install, connecting, testing and commissioning of fully automatic star-Delta motor controller suitable for centrifugal pump sets of capacity up to 40 HP in sheet-steel enclosure, 415 volt, 3 phase, 50 Hz,relay max range 20-33 Amp including Auto ON, indications of supply ON/OFF and pump ON/OFF, recording of real time voltage and current of pump with digital meter, single phase protection relay, phase reversal protection, phase unbalance protection etc complete including taking out existing old centrifugal motor controller from its location by disconnecting all cable connections complete all as specified and as directed. Make : L&T - MN- 32 FASD or equivalent as approved by GE.

Material and Labour for supply, install, connecting, testing and commissioning of fully automatic star-Delta motor controller suitable for centrifugal pump sets of capacity up to 30 HP in sheet-steel enclosure, 415 volt, 3 phase, 50 Hz ,relay max range 14-23 Amp including Auto ON, indications of supply ON/OFF and pump ON/OFF, recording of real time voltage and current of pump with digital meter, single phase protection relay, phase reversal protection, phase unbalance protection etc complete including taking out existing old centrifugal motor controller from its location by disconnecting all cable connections complete all as specified and as directed. Make : L&T - MN- 25 FASD or equivalent as approved by GE.

Material and Labour for supply, install, connecting, testing and commissioning of fully automatic star-Delta motor controller suitable for centrifugal pump sets of capacity up to 17.5 HP in sheet-steel enclosure, 415 volt, 3 phase, 50 Hz ,relay max range 9-15 Amp including Auto ON, indications of supply ON/OFF and pump ON/OFF, recording of real time voltage and current of pump with digital meter, single phase protection relay, phase reversal protection, phase unbalance protection etc complete including taking out existing old centrifugal motor controller from its location by disconnecting all cable connections complete all as specified and as directed. Make : L&T - MN- 16 FASD or equivalent as approved by GE.

Supply and fix in replacement Three phase DOL starters 10 HP ,3 phase,415v,50 HZ ,relay max range 9-15 Amp Cat pt No MN 16 DOL including taking down of worn out starter. Make:- L&T,schenider and equivalent make as specified.

Material and Labour for replacement of power contactor assembly suitable for starter ML-4 type, 3 phase, 415 V AC, 50 HZ complete all as specified and as directed by Engr-in-Charge. Make : L&T - SS90910 or equivalent as approved by GE

Supply and fix contactor, 3 phase, 415 volt, suitable for 60 HP motor star delta starter at panel of fire fighting pump house with all necessary connection including taking down old un-serviceable contactor complete all as specified and directed by Engineer-in-charge.

Supply and fix contactor, 3 phase, 415 volt, suitable for 40 HP motor star delta starter at panel of fire fighting pump house with all necessary connection including taking down old un-serviceable contactor complete all as specified and directed by Engineer-in-charge.

Supply and fix contactor, 3 phase, 415 volt, suitable for 30 HP motor star delta starter at panel of fire fighting pump house with all necessary connection including taking down old un-serviceable contactor complete all as specified and directed by Engineer-in-charge.

Supply and fix contactor, 3 phase, 415 volt, suitable for 15 HP motor star delta starter at panel of fire fighting pump house with all necessary connection including taking down old un-serviceable contractor complete all as specified and directed by Engineer-in-charge.

Supply and fix in repairs electronic over load relay suitable for 50 HP starter, 3 phase, 415 V AC, 50 HZ complete all as specified and as directed by Engr-in-Charge. Make : L&T - MPR305BE320 or equivalent as approved by GE

Supply and fix Single Phase Preventer relay (SPP) Suitable for submersible pump including taking out old unserviceable preventer, complete all as specified and as directed by Engr-in-Charge. Make : L&T - ST92166OOOO or equivalent as approved by GE

M&L for MS chequered plate for cable duct cover of suitable size laid in anlge iron frame of suitable size including removing old rusted plate and angle complete all as specifed and directed by Engineer-in-charge.

Pulling down the existing U/S wires of any type from concealed wiring carefully of aluminium point wiring (light, fan, bell, socket, power point etc.) with or without conduit, along with all connected accessories such as ceiling rose, switches, sockets, switch boards, fan regulator etc complete and all as directed by EIC

Pulling out sub main wiring only any size of aluminium conductor cable PVC insulated with or without condiut all as directed.

Material and labour for point wiring complete with 1.5 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade ISI marked drawn through and including PVC CASING & CAPPING INCLUDING accessories etc including fixed to wall/ceiling including provision of 1.5 sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed as earth wire continuity with wooden board (1st class teak wood) with laminated sheet top cover, 3mm thick complete as specified and directed for :-

One light point controlled by one, one way switch single pole piano type

One Fan point controlled by one, one way switch single pole piano type

One 3 pin 5 Amp socket outlet on the same board .

One 3 pin 5 Amps socket out let on independent board

All as per item No.56.00 here-in-before but with 2.5 Sqmm Copper conductor cable for one 3 pin, 15 Amps socket out let on independent board.

M&L for point wiring complete with 1.5 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade ISI marked drawn through existing conduit including provn of 1.5 sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed as earth wire continuity with new plastic laminated white coloured top sheet cover 3.0 mm thick on existing sunken box complete as specified and directed.

One light point controlled by one, one way switch single pole piano type

One Fan point controlled by one, one way switch single pole piano type

One 3 pin 5 Amp socket outlet on the same board .

One 3 pin 5 Amps socket out let on independent board

All as per item No.58.00 here-in-before but with 2.5 Sqmm Copper conductor cable for one 3 pin, 15 Amps socket out let on independent board.

M&L for sub main wiring with two runs of PVC insulated and unsheathed FRLSHcable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 4 Sqmm single core, copper conductor drawn through existing conduit and 4 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and directed(Note: Two runs of conductor with one run of earth wire will be measured & paid as one unit)

S&F in replacement, switch piano type, 5 Amp. SP, one way all as directed/ specified.

S&F in replacement switch socket outlet, 5 pin, 5 Amp, piano type all as directed/ specified.

S&F in replacement switch socket combination 2 in 1, 6 pin 5 and 15 Amp flush type universal all as directed/ specified.

S&F in replacement switch bell push, flush type, 5 Amp all as directed/ specified.

S&F in replacement stepped type electronic fan Regulator flush type on the existing phenolic laminated etc as reqd single pole 240 volts grade 350 watts heavy duty ISI marked.

S&F in replacement lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings all as specified and directed.

S&F in replacement of Ceiling rose 3 phase, PVC/ Polycarbonate body all as directed/ specified.

Supply and Fix in replacement energy saving, evironment friendly, long life, corrosion resistent, impact proof, Mini LED building security light made up of pressure die cast housing with prismatic polycarbonate diffuser and individual LEDs with secondary optics and IP 65 protection with LED 20 W light source all as per Havells or equivalent in Orient/Philips/Bajaj/CG/Polycab including material and labour for suitable bracket made of 20 mm dia light grade GI pipe & MS clamps complete with nuts and bolts and washers all as specified and directed by Engineer-in-Charge.

Supply and fix in Replacement recessed mounting LED 2x2 luminaire with white acrylic flat light dissipater with LED light source of 34/36 Watt of size 2’x2’(Feet) square shape suitable for modular ceilingincluding cutting the existing false ceiling and fixing complete all as specified and as directed by Eng In Charge. Make : Havells or equivalent in equivalent in Bajaj/ Philips/CG/Orient/Polycab.

Supply and Fixing in repairs wall mounted decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack instant start with uniform light distribution 20 W 4 ft indoor decorative with 2 Core copper wire freom ceiling rose to light fitting as per Make Havells or equivalent in Orient/Philips/Bajaj/CG/Surya/Polycab all as directed by EIC.

S&F in Replacement double door Sheet metal enclosures factory made DBs protection class IP-43, suitable for fixing of MCBs, Isolators etc, confirming to IS 13032 triple pole and neutral 4 ways with 200 Amp rated bus bar 415 volts powder coated all as specified (Make : Havell's, L&T, Standard, Crompton/Indoasian/Polycab)

All as per item No. 71.00 above but SPN 8 way with 200 Amp rated Busbar. (Make : Havell's, L&T, Standard, Crompton/Indoasian/Polycab)

S&F in replacement of isolators, MCBs, etc. In distribution board of the following rating and capacities (Make : Havell's, L&T, Standard, Crompton/Indoasian/Polycab)

MCB TPN 415 volts 63 Amps Capacity, 10 KA

MCB SPN of 240 volts 20/32/40 Amps Capacity, 'C' series, 10 KA

MCB SP of 240 volts 5-32 Amps Capacity, 'C' series, 10 KA

S&F in Replacement metal clad enclosure pole and neutral with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps. (Make : Havell's, L&T, Standard, Crompton/Indoasian/Polycab)

Supply only lead Acid battereies for DG set of following capacity:-(Maintenance free battery of 2 years warrenty)

88 AH,12 Volt Make :- Exide/AMORON/PRESTOLITE

150 AH,12 Volt Make :- Exide/AMORON/PRESTOLITE

M & L for complete checking of AMF panel,finding the fault,servicing complete including replacement of unserviceable spares and testing complete for manual & Auto operations all as directed.

S & F in replacement LED luminaire for solar street light 20 watts, of epoxy powder coated pressure die cast aluminium housing with weather proof gasket and heat resistant tonghened clear glass cover fixed with SS screws, with inbuilt charge controller with auto switch built in for dusk to dawn operation, ingress protection IP 65, including side entry mounting bracket of 40-45mm OD of make Havells or equivalent in Bajaj /Crompton Greaves/Philips as approved by GE.

Supply & Fix in replacement solar battery ,12 V- 40 / 42 AH @ SMF battery,including Metal housing for battery (suitable for solar light pole fixing with mounting fixture as clamp, nut bolt etc) of make : Exide/Amaron/Okaya or equivalent make as approved by GE.

Mohshin Refrigeration & Electrical Services

Jyoti Refrigeration

Gayatri Construction Co