Providing, Installation, Commissioning of Split Type Air Conditioning Machines at State Guest House, Agartala by replacing the old one

Amount

Providing star rated (Minimum 3 star with applicable ISEER according to current industry standard) high wall split type AC machine (Condenser & evaporator coil pipe should be made of copper) of approved make and technical specification with hermetically sealed compressor operating on non CFC refrigerant, pipe as supplied with AC machine, necessary plug top for IDU (With 01 year overall machine and compressor warranty) suitable for wall mounting conforming to IS (Part-II) specification (Except power consumption) suitable for operation on 230 volt, 50 Hz, single phase AC supply capable of performing a) Cooling b) Dehumidifying c) Air circulating d) Filtering having rated cooling capacity

1.5 TR split type high wall AC machine (rated cooling capacity should not be less than 4500 Kcal/hr or 18000 BThu/hr or 5250 watt)

2.0 TR split type high wall AC machine (rated cooling capacity should not be less than 6000 Kcal/hr or 24000 BThu/hr or 7000 watt)

2.5 TR split type high wall AC machine ( Minimum 2 star, rated cooling capacity should not be less than 7500 Kcal/hr or 30000 BThu/hr or 8750 watt)

Providing star rated (with applicable ISEER according to current industry standard) high wall/ ceiling mounting split type AC machine (Condenser & evaporator coil pipe should be made of copper) of approved make and technical specification with hermetically sealed compressor operating on non CFC refrigerant, pipe as supplied with AC machine, necessary plug top for IDU (With 01 year overall machine and compressor warranty) suitable for wall/ceiling mounting conforming to IS (Part-II) specification (Except power consumption) suitable for operation on 420 volt, 50 Hz, three phase AC supply capable of performing a) Cooling b) Dehumidifying c) Air circulating d) Filtering having rated cooling capacity

3.0 TR ceiling mounting cassette type split AC machine (rated cooling capacity should not be less than 9000 Kcal/hr or 36000 BThu/hr or 10500 watt)

Standard installation/re-installation, testing and commissioning of 1.5/2.0/2.5TR high wall splittype AC machine including hole cutting, finishing etc as per direction of the Engineer-in-charge

Standard installation, testing and commissioning of 3.0 TR ceiling mounting cassette type split AC machine including hole cutting, finishing etc as per direction of the Engineer-in-charge.

Fabrication of M.S platform for placement of condensing unit by using M.S angle of (50x50x5) mm size base plate, nuts and bolts/ universal bracket (GSS) for ODU of split type ACs including all accessories for onsite installation i/c painting, fitting, fixing, grouting by cement mixture as per direction of the Engineer-in-charge.

Fabrication of M.S platform for placement of condensing unit by using M.S angle of (65x65x5) mm size base plate, nuts and bolts/ universal bracket (GSS) for ODU of split type ACs including all accessories for onsite installation i/c painting, fitting, fixing, grouting by cement mixture as per direction of the Engineer-in-charge.

Providing, installation of additional length of copper pipe beyond 10ft length of appropriate size as suitable for 1.5/2.0/2.5/3.0 TR as per manufacturer guideline (5/8",3/8",1/2" and 1/4" diameter etc) for both suction and liquid line with insulation and necessary wiring between under and outdoor units.

Providing hard PVC pipe of best quality of 25 mm diameter including necessary clamping and fitting for draining of condensate water from indoor unit as per direction of the Engineer-in-charge.

Dismantling and shifting of 1.5/2.0/2.5/3.0 TR high wall and ceiling mounting cassette type split type AC machine as per direction of the Engineer-in-charge.

Charging of fresh refrigerant gas (R-22) for High wall split type AC system as per direction of the Engineer-in-charge

STANDARD ELECTRONICS

R.P.ELECTRONICS

Accurate Engineers

M/S SREERAM ENTERPRISE