Uchakot Supply scheme Under YAMKESHWAR blocks in District Pauri.

Rates for Supplying ,carting , laying and jointing of G.I pipe (M) , Source work ,Reservoir& Providing Functional House Hold Tap Connection (FHTC) for appropriate & qualitative drinking water for each house hold and all other appurtenant works etc complete UCHAKOT water Supply scheme Under YAMKESHWAR blocks in District Pauri. All rates shall be included all types of taxes and G.S.T. It is necessary the contractor will start the work from source to Distribution System. If any dispute in the source than other work will not done by the contractor

Repairing of Intake including PCC, RCC, M.S Steel works, Painting with all labour materials, T&P etc. complete (as per details atached)

Repairing of Filter Plant, BFG & Protection works including PCC, RCC, M.S Steel works, Painting with all labour materials, T&P etc. complete (as per details atached)

Repair of CWR at MPS including piping inlet/outlet, valve, shortcerating inside with wire, plastering outside, paint etc. (as per details atached)

Repair of Top CWR including piping inlet/outlet, valve, shortcerating inside with wire, plastering outside, paint etc.(as per details atached)

Repair of CWR IPS-1 including piping inlet/outlet, valve, shortcerating inside with wire, plastering outside, paint etc. (as per details atached)

Repair of CWR IPS-2 including piping inlet/outlet, valve, shortcerating inside with wire, plastering outside, paint etc. (as per details atached)

Supply of all materials, labour, T&P etc and construction of R.C.C. CWR of following capacities ( in kiloliters ) with M.S. ladder outside & inside of the tank, M.S. M.H. cover with locking arrangement, supply and fixiing of outlet, inlet, over flow and wash out pipes with necessary sluice valves, pipe pieces (including cost of materials) flooring 0.60 M wide apron, painting on tank body vertical pipes, ladder, M.S. M.H. cover etc. complete with approved water proofing (apex) / enamal paint, testing, filling water for testing purpose etc. 5 KL

Supply and installation of Bucket Type Chlorinator of 25 L Capacity on the top of Service Reservoirs

Supply of G.I. medium pipes & specials fittings Excluding Cartage) lowering them into trenches, laying true to alignment and gradient, laying and jointing of pipe line including cutting and threading of pipe for proper completion of work of following sizes. 15 mm dia (Average 30m length for house connections)

20 mm dia

25 mm dia

32 mm dia

40 mm dia

50 mm dia

65 mm dia

Supply, Carting (site store to trench), lowering them into trenches, laying true to alignment and gradient, laying and jointing of pipe line by welding for making up lengths as required for proper completion of work of following grade & sizes ((Excluding cartage from Rail Head to site store.) MS ERW Pipe Yst 210 65mm Dia 4.8 mm thick

80mm Dia 4.8 mm thick

100 mm Dia 4.8mm thick

Excavation of earth for pipeline trenches 0.60m wide & 0.60 M deep in following strata lift upto 1.5 m lead upto 30 m including refilling, watering, ramming of excavated earth into the trenches and removal of surplus earth upto a distance of 60 m from trenches including supply of labour, T & P etc.all complete assuming that 90% pipe line is laid in trenches, it is estimated that 95% excavation will be in soil mixed with shingle, bajari and boulders and rest 5% will be in medium rock Soil mixed with boulder (SMB)

Medium Rock

Supply & fixing of valves including carting the same up to side of work and fixing the same in water supply lines including cost of valves, specials, labour and T&P complete in all respecf CI Air valve (Screwed) in position including all material labour T&P etc. 15 mm dia.

20 mm dia

Supply of all materials, labour, T & P etc. and Construction of Air Valve Chamber as per type design complete (Size :- 0.9 m x 0.9 m x 1.0 m)

Supply of all materials, labours, T&P etc and construct RCC 1:1.5 :3 anchor / thrust blocks as per design complete

M.S. Iron work in anchor / thrust blocks .

Supply of all materials, labours, T&P etc and construct of briddle path along the alignment of rising main for cartage of rising main and later on for effective maintenance.

Painting of MSERW Pipes with 2 coats of approved quality. (Anti-Corrosive paint over one coat of Primer) (dia. of pipe in mm) 65mm Dia 4.8 mm thick

80mm Dia 4.8 mm thick

100 mm Dia 4.8 mm thick

Supply and fixing of the following fittings including cartage of materials, labour, T & P etc complete G.M Gate Valve IS 778 Vertical Check Class -1 25 mm

Providing & Fixing DI D/F sluice valves confirming to IS 14846-2000 in position including all material, labour, T&P etc complete 50 mm dia.

Making Ferrul connection with the M.S./ Galvanised mains fixing ferrul, washer, stop cock etc. up to 25 mm nominal dia.

Brass ferrul 15 mm with C.I. mouth cover

Supply of all materials, labour, T & P etc and construction of BPT as per type, design (Size :- 1.0 m x 1.0 m x 1.0 m)

Excavation in foundation for retaining, breast walls etc, in all types of soilsand rocks including all lead, lift and disposal of surplus material as perdirection of engineer - in - charge, as per drawing and technical specifications Clause 305.1 of MORD Specifiction

Random Rubble Stone Masonry laid in 1:6 cement and sand mortar, in breast walls, retaining walls, parapets, scuppers, etc. including supply of all material, labour, T&P and royaltiies etc. complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203 of MORD Specifiction

Random Rubble Stone Masonry laid Dry, in breast walls, retaining walls, etc. including supply of all material, labour, T&P and royaltiies etc. complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203 of MORD Specifiction

PCC 1:4:8 including supply of all materials, labour, T&P etc. complete

PCC 1:2:4 including supply of all materials, labour, T&P etc. complete (For Re-construction of cc road at different places.)

Cartage of Materials as per given Annexure

Dismantling of following existing road pavement for laying different sizes of pipes, stacking the serviceable materials and disposal of waste materials upto a distance of 30 m including supply of materials, labour, T&P etc. complete CC Road (Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Repair of Pump House at MPS, IPS Ist & IPS IInd including PCC, RCC, M.S Works, Painting, electrical & Mechanical Works with labour, material, T&P etc complete (As per Annexure)

Approach Road including PCC & all Labour, Materials, T&P etc. complete (As per Annexure)

Construction of Duty room with Toilet & Store including PCC, RCC, M.S Works, Painting, electrical & Mechanical Works with labour, material, T&P etc complete (As per Annexure)

SITC of electric driven multi-stage vertical turbine pumps with bronze impellers, stainless steel shaftcapable to deliverclear water 285 LPM discharge at 45 Mt. head 1440 r.p.m. at Raw Water

Supply of vertical shaft TEFC electric motors as suitable as above pump sets

SITC of electric driven multi-stage horizontalclear water centrifugal pumps with bronze impellers, stainless steel shaftcapable to deliver clear water 325 LPM discharge at 400 Mt. head 2900 r.p.m. at MPS

Supply of horizontal shaft TEFC electric motors as suitable for above pump set.

SITC of electric driven multi-stage horizontalclear water centrifugal pumps with bronze impellers, stainless steel shaftcapable to deliverclear water 340 LPM discharge at 410 Mt. head 2900 r.p.m. at IPS Ist

Supply of horizontal shaft TEFC electric motorsas suitable as above pump sets

SITC of electric driven multi-stage horizontalclear water centrifugal pumps with bronze impellers, stainless steel shaftcapable to deliverclear water 275 LPM discharge at 220 Mt. head 2900 r.p.m. at IPS Ist

Supply of horizontal shaft TEFC electric motorsas suitable as above pump sets

Supply of M.S fabricated base plate and coupling for above pumps and motors.

Supply of fully automatic auto transformer type starter suitable for above motors having airbreak contactors, electroni timer, thermal over load relay, adequate size Aluminum bus bars, copper wound auto transformer and dulywired by copper leads/ wire, lugs, ON/OFF andreset switches and indicators etc. complete in all respects for Raw Water

Supply of fully automatic auto transformer type starter suitable for above motors having airbreak contactors, electroni timer, thermal over load relay, adequate size Aluminum bus bars, copper wound auto transformer and dulywired by copper leads/ wire, lugs, ON/OFF andreset switches and indicators etc. complete in all respects For MPS & IPS Ist

Supply of fully automatic auto transformer type starter suitable for above motors having airbreak contactors, electroni timer, thermal over load relay, adequate size Aluminum bus bars, copper wound auto transformer and dulywired by copper leads/ wire, lugs, ON/OFF andreset switches and indicators etc. complete in all respects For IPS IInd

Supply of power wiring material such as 25 sq.m.m 3 Core copper conductor cable XLPE insulated cable for power wiring between the control panel and starter to motor. (FOR TWO RUNS)

Supply of power wiring material such as 70 sq.mm. 3and half Core aluminum onductor cable XLPE insulated , cable for power wiring between power transformer and contrl panel

Jointing material for wiring connection including lugs, thimble , insulation tapes, nutt bolts etc.

Double loop earthing of all electrical equipmentswith supply of material such as G.I earth strip, earth plate, GI funnel, charcoal, Salt watering pipe etc. including digging of pits and refilling complete

Supply of main piping and valves comprising of the following for Raw Water, MPS & IPS 100 mm dia CI D/F sluice valve PN-1.0-02 nos. 100 mm dia CS D/F sluice valve class 300 ASA-02Nos. 100 mm dia CS D/F sluice valve class 300 ASA-02Nos. 100 mm dia CS D/F reflex valve class 300 ASA-02Nos. Following MS pipes, reducers, tapers, bends, tees and other specials required as per site conditions including necessary nos. of nuts and bolts and high pressure packing i-MS Plain pipe of 100 mm dia 4.80mm thick -18Mtr. iii-MS DF reducer 100mm xpump outlet size-1 No. iii-MS DF 90 degree bend 100mm dia-2Nos. iv-MS AF 100x100x100-Nos. v- MS Radial TEE 100x100x100-2 Nos. vi-MS flange 100mm dia -6 Nos. vii-MS flange 100mm dia -12 Nos. viii-MS DF 90 degree bend 100mm dia - 2Nos ix-MS Blind flange for 100 mm dia for delivery line -1 Nos.

Supply of a set of pressure gauges (0-56) kg/cm^2 complete with control cocks and nipples including all necessary fitting etc.

Tools i. Grease Gun-1No. ii.D.E spanner set (8 Pcs)-1 set iii. Ring spanner - 1 set iv. Screw driver-1 set v. Insulated plier-1 Nos. vi. Adjustable wrench 150/200mm size-1 set vii.Tool box-1 No. viii.Bearing pulller -1 No. ix. Suitable Crimping tool -1 No. x. Pipe wrench 18" -01 No.

Rubber insulation sheet 2.0mx0.1mx25mm thick

Installation and setting to work of entire equipment including pumps, motors, control panel, starter, and power wiring etc at Raw Water, MPS & IPS Ist

Provision of Sign Board

Provision of Material Testing