Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L2₹3.5 L+₹0.02 (<0.01%)Accepted-AOC R O PURANA BAZAR KARSOG PO KARSOG TEH KARSOG DISTT MANDI H P 175011 | MANDI | HIMACHAL PRADESH | 175011 | L2 | Accepted-AOC Awarded to M/S Koyla Engineering Works because the price-bid was lowest 2 and found to be valid i.e. as per the terms and conditions mentioned in the tender document. | |
| 2 | L1₹3.5 LRejected-Finance | L1 | Rejected-Finance Price bid was found to be the L 1, but at the same time it was also found to be less than 25 percent of the NIT amount as per the terms and conditions mentioned in the tender document hence rejected | |
| 3 | L3₹3.5 L+₹118.97 (0.03%)Rejected-Finance VILL SHANA PO SUB TEHSIL PANGNA DISTT MANDI HP | MANDI | HIMACHAL PRADESH | 175001 | L3 | Rejected-Finance L3 |
Tender Value
₹4.6 L
EMD Value
₹11,504
Closing Date
13 Feb 2023, 10:30 amClosed
Er. Sushil Kumar, Sr. Executive Engineer,ED Karsog
Office of Sr. Executive Engineer,ED Karsog
Tender for replacement of 30 Nos. rotten wooden poles from existing 25KVA 22/0.4KV Sub-Station Richhani under Electrical Sub-Division HPSEBL Seri.
2023_HPSEB_68113_1
184619/2022-23-8281-90 Dated 02-02-2023
Open Tender
Supply and Erection
Item Wise
30 days
Seri
Please refer tender document
10 documents required · 10 mandatory
₹590
₹11,504
23 Feb 2023
4 Feb 2023
13 Feb 2023
4 Feb 2023
13 Feb 2023
4 Feb 2023
Erection Part
Erection of LT steel tubular pole 8/9 Mtr. Long: - Excavation of earth in all kinds of soil for making pits of size 1.2x1x1x1 M suitable for installing STP 8/9 mtr long, erection of STP 8/9 meter long with RCC muff in the excavated pit, refilling of pit with excavated soil including watering and ramming etc. as required disposing off surplus soil at the dumping site of local bodies, fixing of M.S clamps , stay clamps, stay wire,M.S angel LT cross arms, insulators, nut & bolts including drilling,bending welding etc.as required, filling of RCC muffwith Cement concrete in ratio 1:2:4 (1cement:2 sand :4 concrete 20mm nominal size) from bottom to top, painting of all steel parts and STP with two coats of aluminium paint A grade, fixing of any other item required to complete the job, as per standard practice of HPSEBL and as per the direction of Engineering in charges.
Stay set(LT):- Digging of pit(0.8x1.2x1.35m),fixing of stay rod, filling and ramming of pit, nozzelling and tightening, . complete in all respect.
Earthing set(LT):- Digging of pit (0.8x1.2x1.5m),fixing of G.I wire to earth system, filling and ramming of pit, etc. complete in all respect.
Erection of conductor:- Re-stringing and re-sagging , fixing of jumpers of LT Line with off sizes Conductor and G.I Earth wire 8/10 SWG , neutral & earth wire to be run on AI -Bracket below three phase LT Line Complete in All respects . As per direction if engineer incharge.
Dismantling Charges of Conductor off sizes:-Removal of conductor from insulator and de-stringing complete in all respects
Extra Mannual carriage for an average lead of 1.000 Km from road side to site of work for Steel Tubular Pole 8/9 Mtr Long with allied material. For an average lead of 1.5 Km =30x1.5=45 km
Dismantaling of rotten wooden pole and carriage of rotten wooden pole from site of work to the JE Section store , including transportation , loading and unloading complete in all respects as per direction of Engineer In-Charge
Providing and Supply of Material
Providing RCC Pipe(Muff) ISI Marked sutaible for different size of steel poles 2000 mm in length and 25 mm thick with 250 mm internal dia duly fabricated by using un-galvanized MS wire of 12 SWG Rings and 6 mm MS Round in vertical direction conforming to IS 458-1988.
Providing Aluminium Paint of superior quality
Prov. Nuts & Bolts 5/8" thick with washer off sizes etc.( M.S Black Hexagon Bolts and Nuts with washers conforming to ISI-1363-1992 ) duly fully threaded and Half threaded as per site requirement
Providing D-Iron with shakle insulator , D-Iron made TATA/SAIL/Rashtriya Ispat M.S flat of 50x6mm suitable for 3"x3.5" shackle insulators, having three holes, one in each side suitable for use with 16mm bolt. D-Iron to be painted with superior quality black Japan paint . The size of D-Iron will be 125x75mm. The weight of D-Iron should not be less than 750 grams.
Providing LT Stay set made of M.S Round 1600 mm in length ,16 mm dia having thread upto 300 mm on one end, with one nut and one check nut to avoid slippage and eye of 40mm dia on other side and welded conforming REC Specifications. Elbow made of channel iron 75 x40 x6 mm,250 mm long and M.S. Round 60 mm dia , vertical height 300 mm, both end bent after putting into two holes in channel iron taking the ends out 25 mm minimum and welded with channel iron . One anchor of A.I. 50x50x6mm ,750 mmin length with one hole of 20 mm dia in the centre . The complete stay set shall be painted with superior quality black Japan paint.
Prov Full Clamps made of MS flat 50x6mm suitable for 8/9 M long STP with holes of 5/8" size on both ends as per drawing attached [ 2 No for A.I + 1 No for Stay Set]
Prov. Egg Insulator complete in all respects
Prov. LT Earthing Set complete in all respects
Providing 8 SWG GI wire.
Prov. Stay wire (7/3.15mm) superior quality
Providing LT cross arm made of MS angel 75x75x6mm,1.5+0.02 meter long with holes of suitable size .
Koyla Engineering Works
VISHAL ELECTRICAL GOVT CONT
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .