PROVN OF 20 X TOILET WITH COMMODE SHEET NEAR KLP AND PROVN OF GUARD ROOM ALONGWITH WATCH TOWER AND CATTLE TRAPS AT MIL STN AT GANDHIDHAM UNDER GE ARMY BHUJ

Amount

Lump Sum price worked out by the contractor for the building works as listed in Sch 'A'Part-I ( Refer Pre priced schedule attached separately)

Lump Sum price worked out by the contractor for the HARDSTANDING/PATH works as listed in Sch 'A'Part-II ( Refer Pre priced schedule attached separately)

Lump Sum price worked out by the contractor for the SEWAGE DISPOSAL works as listed in Sch 'A'Part-III ( Refer Pre priced schedule attached separately)

Lump Sum price worked out by the contractor for the EXTERNAL WATER SUPPLY works as listed in Sch 'A'Part-IV ( Refer Pre priced schedule attached separately)

Lump Sum price worked out by the contractor for the EXTERNAL ELECTRIFICATION works as listed in Sch 'A'Part-V ( Refer Pre priced schedule attached separately)

Lump Sum price worked out by the contractor for the INTERNAL WATER SUPPLY works as listed in Sch 'A'Part-VI ( Refer Pre priced schedule attached separately)

Lump Sum price worked out by the contractor for the INTERNAL ELECTRIFICATION works as listed in Sch 'A'Part-VII ( Refer Pre priced schedule attached separately)

Schedule 'A' Part-VIII- Miscellaneous Items (PROVN OF GUARD ROOM ALONGWITH WATCH TOWER AND CATTLE TRAPS Note : This schedule is not prepriced by MES and the estimated rate indicated as blank under column F signifies that only)

Excavation in trenches, n.exc 1.5m wide and n. exc 1.5m in depth, for foundation, etc and getting out hard dense soil etc complete all as specified and directed

Material and labour for Plain cement concrete (1:4:8) type D-2 (40mm graded stone aggregates)as in foundations,filling and mass concrete etc complete all as specified.

Material and labour for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping etc, weathering slightly rounded or chamfered angle and throating including necessary form work complete all as specified and directed

Material and labour for re-inforced cement concrete of grade M-30 (Design mix) (using 20mm graded stone aggregate) as in foundation, including rafts, footing, foundation beams, plinth beams,lintels, base for columns, retaining walls and mass concrete etc. Complete all as specified and directed

Material and labour for re-inforced cement concrete of grade M-30 (Design mix) (using 20mm graded stone aggregate) as in columns,pillars, piers, posts and struts complete all as specified and directed

Material and labour for re-inforced cement concrete of grade M-30 (Design mix) (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5mm span complete all as specified and directed

Material and labour for re-inforced cement concrete of grade M-30 (Design mix) (using 20mm graded stone aggregate) slab supported on walls ,beams, coumnns in floor, roof, landing complete all as specified and directed

Material and labour for form work to sides of concrete foundations , footings, bases of coulmns , raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or batter, flat, to achieve even and rough finished concrete surfaces complete all as specified and direceted.

Material and labour for Formwork to soffit of suspended slab such as roof slab,floor and similar work n exc 200 mm thick to achieve even and rough finished concrete surfaces complete all as specified and direceted.

Material and labour for Formwork to sides of pillar ,post ,struts ,pier coumn achieve even and rough finished concrete surfaces complete all as specified and direceted.

Material and labour for Formwork to sides & soffits of floor or roof beam achieve even and rough finished concrete surfaces complete all as specified and direceted.

Material and labour form work edges of concrete flats, breaks in floor, opening in concrete walls, floor and roof etc rough finished surfaces of concrete exc 10cm but not exc 20 cm wide all as specified and direceted.

Material and labour for mild steel TMT bars, 10mm dia and over,as in reinforcement, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and direceted.

All as per Item No 20 here-in-before but mild steel TMT bars, 6 mm to 8 mm dia ditto-

All as per Item No 20 here-in-before but 5mm dia and over upto and including 10 mm dia in stirrups, spaces and binders Ditto-

Returning, filling in , including spreading, levelling, watering and well ramming excavated soil in layers not exc 25cms thick in trenches all as specified and directed.

Removing surplus soil obtained from excavated to a distance not exceeding 50 metre and depositing where directed at a lavel not exceeding 1.5 metre above the starting point complete all as specified and direceted.

Material and labour for precast concrete block masonary with solid blocks of PCC (1:5:8) (using 20mm and 12.50mm graded stone aggregate in the proportion as direceted) exc 10cm in width and set and jointed in Cement mortar (1:6) complete all as specified and directed.

Material and labour for spreading, levelling, watering and well ramming in layers not exceeding 25cm as in soils complete all as specified and as directed

Material and labour for 75mm thick cement concrete 1:4: 8 type D-2, (40mm graded aggregate) as in sub base to floor all as specified and directed

Material and labour for non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including screed 15mm thick in CM 1:6 complete all as specified

Material and labour for 15 mm thick rendering in cement mortar on fair faces of brick work or concrete surfaces , applied in two layers ie. Ist layer of 10 mm thick rendering in cement mortar (1:6) and 2nd (top) layer of 5 mm thick rendering in cement mortar (1:4) and top layer mixed with water proofing compound as per manufacturer's instruction & finished even and smooth without using extra cement complete all as specified and directed. (Note:- Water proofing compound shall be measured and paid seperately under appropriate item of Sch 'A' as "supply only")

Material and labour for for rendering 10 mm thick in CM (1:6 on fair faces of brick work or conrete surfaces/stone masonary and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

Material and labour for rendering 5 mm thick in cement mortar (1:3) on ceiling finished even and smooth without using extra cement in patche repairing including preparation of the newly plastered surfaces & applying 3 coats of white wash on ceiling surfaces complete all as specified and directed.

Supply only integral water proofing compound ISI marked.

Preparation of new plastered surfaces of walls and applying three coats of white washing complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of wall and applying two coat cement base paint over one coat of chalk whiting on plastered surfaces all as specified and directed

Material and labour for for pressed steel frames for doors with one or more rebates of size 125 mm X 60 mm , including fixing of necessory lugs , hinges , lock strike plates , etc. complete all as specified and directed.

Supply and fixing 35 mm thick factory made Flush shutters , solid core construction , with block board core and plywood face panels commenrcialface on bath sides with lipping/frame to match with and including preparation of the surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Supply and fixing butt Hinges, medium weight, mild steel, 100 mm size complete all as specified.

Supply and fixing 150 mm long aluminium anodised , barrel tower bolt of extruded section all as specified and directed.

Supply and fixing extruded aluminium alloy handles fabricated types, anodised, each 150mm long complete all as specified and directed.

Supply and fixing floor door stopper of aluminium alloy body and tongue , anodised ,with hard drawn steel spring , fixed in floor , having overall length of cover plate 140 mm complete all as specified and directed.

Supply and fixing aluminium alloy, anodized sliding door bolt of 300mm length with hasp and staple (Bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolt of extruded section or cast aluminium alloy complete all as specified and directed.

Material and labour for framed work such as grills, grating, with ends of bars shouldered and or riveted or forged into spikes framed guard bars, barred iron doors, ladder framed balusters, walk ways railing framework of water tanks and similar work conforming to Fe.290 Gde-E-165 complete all as specified and directed.

M&L for point wiring for One light point controlled by one; one way switch. using 1.5 Sqmm (nominal sectional area) multi stranded copper conductor, single core, FRLS PVC insulated & unsheathed cable, 1100 volts grade with and including PVC casing and capping of adequate size fixed on surface with PVC rawl plugs with and including wooden/sunken type pressed steel terminal boxes of required size of not less than 1.6 mm thick factory made and factory painted with top cover 3mm thick plastic laminated sheet fixed with brass screw and washer with all accessories including single core multi-stranded copper conductor 1.5 sqmm size PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit/casing capping complete NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes / junction boxes of any shape and size with 3mm thick laminated sheet fixed with suitable brass screws and cup washers

All as per item No 43 here-in-before but One fan/exhaust fan point controlled by one, one way switch.

All as per item No 43 here-in-before but One 3 pin socket out let 5 amp (independent) point controlled by one; one way switch.

All as per item No 43 here-in-before but One 3 pin socket out let 5 amp point on the (same board) with other switches.

S&F ceiling rose, surface bakelite, 65X20mm three terminal complete all as specified and directed

S&F switch piano flush button single pole230 / 250 volts one way 5 Amps.

S&F socket outlet 5 pin 5 Amp, flush type complete all as specified and directed

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder includingLED tube light connecting up with three core flexible copper conductor cable of suitable size from ceilingrose complete

Supply & fix sheet metal enclosure powder painted for MCB DB SPN 2 way single door with IP-42 protection with Din rail and busbar complete all as specified.

Supply & fix in repair MCB SP 230V 6Amps to 32 Amps 10 KA rating ISI marked and connecting complete all as specified.

Supply & fix in repair MCB SPN 230V 6 40Amps 10 KA rating ISI marked and connecting complete all as specified.

Material and labour for earthing complete with galvanized steel pipe electrode 40mm bore, medium grade 2.5 m length buried directly and preferably vertically in ground level connected with earthing strip 25x 4mm by bolts nuts, washers and electric arc welding not exceeding 50mm long all as shown in plate No.4 to the test point up to 7.5 m by means of bolts, nuts, check nuts and washers including earth work and excavation in any type of soil PCC 1:3:6 type C1 chamber and RCC 1:2:4 type B1 cover 40mm thick with MS rod 8 mm dia 150mm long reinforcement all as specified and tested on completion.

S & F Ceiling fan fan 1200mm sweep complete with down rods, blades and accessories 230 V, Min air delivery 210 CFM with external driver and including remote control with service value 6.00 BEE five star brush less direct current motor (BLDC) and connecting up to the ceiling rose with flexible three core copper conductor of size 23/.0076 and coneecting to down rod complete all as specified and directed. Make : Havells/Crompton Greaves/Orient

Sai Ram Electricals and Refrigeration Works

M/s. Mohandas V Rajani