9/2021-22

Amount

Erection of AAAC (100 mm sq.) {Includes 3 conductor lengths for 3 phase and additional 3% sag,Jumpering wastage(Supplied by HPSEBL)

Prov. Steel Tubular Poles (11 Mtr, working load >227 kgf/m sq.)

Prov. RCC Muff with concrete filling

Dead End Structure on Double poles:

Belt set-MS Angle Iron: 50x50x6, length [1500 mm x 2 No.]

X-Bracing Set-MS Angle Iron: 50x50x6, length [2125 mm x 2 Nos.]

X-arm (Horizontal)- MS Channel Iron: 100x50x6, length [2140 mm x 2 Nos.]

Disc insulators set on dead end structure (comprising 1 No. Disc: ^^(Porcelian, BS, 12 KV, 90 KN,) i/c Dead end clamps etc.) x (3 Nos. conductors) x (2 Nos. sides)

11 KV Pin insulators (Porcelian, 12 KV, 10 KN): 3 Nos. per DP structure

HT Stay/ Guy Arrangement

Prov. Stay set complete in all respect

Prov. Stay Wire (7/3.15 mm) (@ 6.0 Kg. Per Stay Set)

Earthing

Prov. HT earthing set complete

Single continuous earth wire (GI 8 SWG) @ 0.102 kg/mtr

Eye Hook for earth wire

Earth wire clamp

Full Clamps (on DP & SP structure )

Prov. 11 KV Danger Plate (250x200x1.60 mm)

Prov. M.S. Nuts & Bolts of various sizes with flat and spring washers

Prov. Barbed Wire

Prov. Alluminium Paint .

GO AB Switch Unit (11kV, 400A, 25 KA ) (P-30)

D.O Fuse Unit

ABSTRACT OF COST (2x630 KVA DTR )

Distribution Transformer (Ordinary), 11/0.4 kV, 630 KVA (If the Transformer is available at the time of award, then only erection shall be done by the Contractor)

MS Angle Iron (50X50x6 mm), Length: 2800 mm x(1 Nos for LA's + 2 No. for Dist Panel Box)

GO AB Switch Unit (11kV, 400A, 25 KA ) (P-30)

D.O Fuse Unit

Surge Arrester, 9 kV Station Class (Porcelain Type)

Discs insulator sets (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.)

Pipe Earthing Set

LT Distribution Panel Box with ACB (1000A, 50KA 4P, 1 No.) & SFU (100A, 9 No. rewirable)

Nuts and Bolts of Various Sizes with flat and spring washers

Aluminium Thimble

Aluminium Thimble

Danger Plate

Transformer Bed (civil work as per HPSR)

Chain link fencing, Angle iron, gate etc. for transformer fencing

LT Cable (3.5 Core) 400 mm²x 2 incoming

LT Cable (3.5 Core) 70 mm²x 6 outgoing feeder

Erection of CT/PT Unit 11KV (PT (1Unit, 11KV/110V)CT (3 No. 10-400/5A) Provided by HPSEBL.

Prov. Energy Meter (3-Phase, 4-Wire) CT-PT operated Static Trivector Meter "Category -C" (PT RATIO-/-110V, CT ratio-100/5A)

Aluminium Paint.

Cost of 11 KV HT Line

Erection of AAAC (100 mm sq.) {Includes 3 conductor lengths for 3 phase and additional 3%sag,Jumpering wastage(Supplied by HPSEBL)

Prov. Steel Tubular Poles (11 Mtr, working load >227 kgf/m sq.)

Prov. RCC Muff with concrete filling

Run Thro' structures on Single poles:

Cross Arm: [Channel Iron (100x50x6 mm), Length (1070) mm

Angle Iron (50x50x6 mm), Length (2x750) mm

Pole Top Bracket

11 kV Pin Insulators (Porcelain, 12 kV, 10 KN): 3 No per pole structure

Dead End Structure on Double poles:

Belt set-MS Angle Iron: 50x50x6, length [1500 mm x 2 No.]

X-Bracing Set-MS Angle Iron: 50x50x6, length [2125 mm x 2 Nos.]

X-arm (Horizontal)- MS Channel Iron: 100x50x6, length [2140 mm x 2 Nos.]

Disc insulators set on dead end structure (comprising 1 No. Disc: ^^(Porcelian, BS, 12 KV, 90 KN,) i/c Dead end clamps etc.) x (3 Nos. conductors) x (2 Nos. sides)

11 KV Pin insulators (Porcelian, 12 KV, 10 KN): 3 Nos. per DP structure

HT Stay/ Guy Arrangement

Prov. Stay set complete in all respect

Prov. Stay Wire (7/3.15 mm) (@ 6.0 Kg. Per Stay Set)

Earthing

Prov. HT earthing set complete

Single continuous earth wire (GI 8 SWG) @ 0.102 kg/mtr

Eye Hook for earth wire

Earth wire clamp

Half Clamps (on Run thro structure)

Full Clamps (on DP & SP structure )

Prov. 11 KV Danger Plate (250x200x1.60 mm)

Prov. M.S. Nuts & Bolts of various sizes with flat and spring washers

Prov. Barbed Wire

Prov. Alluminium Paint .

GO AB Switch Unit (11kV, 400A, 25 KA ) (P-30)

D.O Fuse Unit

ABSTRACT OF COST(100KVA DTR)

Distribution Transformer (Ordinary), 11/0.4 kV, 100 KVA (If the Transformer is available at the time of award, then only erection shall be done by the Contractor)

Steel Tubular Poles (9 m, Working Load > 200 kgf/m²)

Muffs with concerete filling

X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 4 Nos]

X-Arm: [Channel Iron (75x40x6 mm), Length : 2800 mm X 4 Nos] for supporting DO fuse unit & GO switch

X-Arm: [Channel Iron (100x50x6 mm), Length : 460 mm X 2 Nos] for supporting Main Channel of DTR

MS Angle Iron (50X50x6 mm), Length: 2800 mm x(1 Nos for LA's + 2 No. for Dist Panel Box)

Transformer Belting & Knee Bracing

MS Angle Iron (50x50x5)mm, Length 2800 mm x 4 Nos.

MS Angle Iron (35x35x5)mm, Length 460 mm x 2 Nos.

GO AB Switch Unit (11kV, 400A, 25 KA ) (P-30)

D.O Fuse Unit

Surge Arrester, 9 kV Station Class (Porcelain Type)

Discs insulator sets (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.)

Stay set complete

Stay Wire (7/3.15 mm) (6.0 kg Per Stay Set)

Pipe Earthing Set

LT Distribution Panel Box with MCCB

Half Clamp (M.S. Flat 50X6 mm)

Full Clamp (M.S. Flat 50X6 mm)

Nuts and Bolts of Various Sizes with flat and spring washers

Aluminium Thimble

Aluminium Thimble

Danger Plate

LT Cable (3.5 Core) 120 mm² (P-1)

Erection of CT/PT Unit 11KV (PT (1Unit, 11KV/110V)CT (3 No. 10-400/5A) Provided by HPSEBL.

Prov. Energy Meter (3-Phase, 4-Wire) CT-PT operated Static Trivector Meter "Category -C" (PT RATIO-/-110V, CT ratio-25/5A)

Aluminium Paint.

Cost of LT Line

Erection of AAAC (100 mm²)Supplied by HPSEBL.

Erection of LT AB Cable 3.5 Core 95mm2(Supplied by HPSEBL).

ST Poles (9 m, Working Load > 180 kgf/m²)

Muffs with concerete filling (1800 mm)

AI (75x75x6) (length 1.5 mtr.)

Shackle Insulator (16 kN)

D-Iron (U- Clamps)

Earth Knob

LT Stay Set

Stay Wire (7/3.15 mm) (6.0 kg Per Stay Set)

Full Clamps (2 No. for AI & 1 No. for Stay Set)

Earthing Set complete

Earth wire (GI, 8 SWG) {Additional 1% (Sag and wastage)} @ 0.102 kg/m

Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm Φ or more (with flat and spring washers)]

Aluminium Paint

Spiral PVC Spacer

c/o 2 No. Transformer Bed and fencing for 630 KVA S/Stn.

Excavation in foundations, trenches etc., in earth work, lift upto 1.50 Metres stacking the eacavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15cm. layers, when required in to plinths sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20 metres.

Providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form workin: Foundation and plinth

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in vertical surfaces.

Providing and laying cement concrete 1:5;10 (1cement :5sand :10 graded stone aggregate 40mm. nominal size) with 15 % plum and curing complete excluding cost of form work in retaining walls/ Breast walls, the size of plums shall usually be 150mm. to 300mm. as per H.P.P.W.D.Specification.

15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. Cement Mortar 1:6 (1Cement:6 Sand).

Steel work in single sections including cutting,hoisting,fixing in position and applying a priming coat of red lead paint In R.S.Joists,channels angles,tee

Supplying and fixing wovenplains G.I. wire fencing of mesh 50mm to 150mm to any type of standard rails, strainging bolts. etc. including provision of binding wire, staples etc.

Providing and fixing heavy duty hinges and locking arrangment of M.S. ,sliding bolts on both sides to gate.

Painting the fencing and vertical post etc after applying one coat of red lead primer and then 2 coats of Alluminium paint

Supply & spreading broken/crushed stone agg. Chipping of hard stone of the following nominal size free of disintegrated pieces of delefarious & organic material 20 to 25 size.

Antibeed treatment of yard

AGR Engineers

M/S DEVARYA ENGINEERING