Loading
Loading…
Loading…
Tender Value
₹1.3 Cr
EMD Value
₹2.6 L
Closing Date
9 Oct 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
MAINTENANC
15 conditions · 4 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V = Advertised value of the tender in crores of Rupees N = Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer shall possess a valid Electrical Contractor License, issued by any State Government or Union Territory Administration, authorizing execution of electrical works up to 650 V. The contractor shall have in his employment or shall engage a person holding a valid certificate of competency issued by any State Government or Union Territory Administration for supervision of electrical works up to 650 V.Offers not accompanied by a valid Electrical Contractor License and requisite Supervisor competency for works up to 650 V shall be summarily rejected.
Similar Nature of Work: Supply, installation, testing and commissioning of LT/HT electrical GS assets ORSupply, installation, testing and commissioning of electrification or rewiring of building/workshop. ORSupply, installation, testing and commissioning of Yard/circulating area/street lighting/tunnel/facade lighting. ORSupply, installation, testing and commissioning of high-mast lighting. ORSupply, installation, testing and commissioning of glow signages. ORSupply, installation, testing and commissioning of LT/HT electrical GS sub-station with at least 50% capacity of proposed sub-station ORRepair/overhauling of LT/HT electrical GS assets including LT/HT sub-stations.
49 conditions · 8 needing a document upload
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society /Registered Trust / Hindu Undivided Family (HUF) /Limited Liability Partnership (LLP) etc., and corresponding documents shall be submitted by the tenderer as per the composition of the Firm.
The Bid Security shall be deposited either in cash through e payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure- VIA of GCC and shall be valid for a period of 90 days beyond thebid validity period. Non-submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non- submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document within 5 working days of deadline of submission of bids.
Eligibility criteria: Eligibility criteria shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested/digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document.
Tender Form (First sheet, Second sheet) of The GCC April 2022.
Certificate format (Affidavit) which available as Annexure - V in Mandatory documents. A facility has already created for online submission of Annexure V of GCC in IREPS module; uploading of physically signed Annexure V by tenderer has been discontinued
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society /Registered Trust / Hindu Undivided Family (HUF) /Limited Liability Partnership (LLP) etc.
The corresponding documents shall be submitted by the tenderer as per the composition of the Firm: Sole Proprietorship Firm: (i) All documents in terms of Para 10 of the Tender Form (Second Sheet) above. HUF: (i) A copy of a notarized affidavit on Stamp Paper declaring that he who is submitting the tender onbehalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above. Partnership Firm: (i) All documents as mentionedin para18 of the Tender Form (Second Sheet). Company registered under Companies Act2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company(backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms Para 10 of the Tender Form (Second Sheet) above. LLP (Limited Liability Partnership): (i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders/contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were/are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (v) All other documents in terms of Para10 of the Tender Form (Second Sheet). Registered Society & Registered Trust: (i) A copy of Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents andcreate liability against the Society/Trust.(iv) A copy of Rules & Regulations of the Society (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above.
The tenderer shall be required to submit the Bid Security with the tender for the due performance with the stipulation to keep the offer open till such date as per Clause No.5 of PART -1 of The GCC, April 2022.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
GTL Div: Electrical Arrangements- 1.Raising of Platforms to High Level and Provision of New 3m FOB at LMD,TGL and JKO stations.2. Raising of Platforms to High Level at PDL, JUR and RLO Stations.
GTL-EM-43-2026-27~SCOR
GTL-EM-43-2026-27
Open
Works - General
9 Months
Anantapur, Andhra Pradesh
₹0
₹2.6 L
17 Sept 2026
17 Sept 2026
25 Sept 2026
105 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,29,81,555.56 | ||
| details. | Item Breakup for | — | — | ||
| Supply, Transportaion, Erection & commissioning of 5mtr long hot dip galvanised Octagonal pole (IS 875) with 130mm bottom A/F & 70mm top A/F made up of 3mm thick HT sheet (S 355 JO steel plate for shaft), along with base plate IS 2062 of size 200x200x12mm, M16x600 long J type EN8 grade foundation bolts, 1000mm long single/ Double arm bracket Including the Supply of Suitable bolts with Bakelite Sheet with MCB ( for mounting inside the base compartment of pole ) including Erection & commissioning of 5 mtr. octagonal pole including RCC concrete foundation & plinth in hard soil including excavation of soil, tamping of concrete, grounting and supply of other required materials and accessories complete. | — | — | — | 38,03,335.2 | |
| details. | Item Breakup for | — | — | ||
| Service connection to the fitting from the junction box of 5 mtrs Octogonal pole by means of PVC insulated copper conductor of 3 core 1.5 Sq mm with necessary lugs at the juction box and necessary termination at the luminaire complete. | — | — | — | 75,555 | |
| details. | Item Breakup for | — | — | ||
| Supply and fixing of junction box suitable for street light poles model no. GSJB306-T of size 275mm X135mm X 110mm with 4 nos of connectors and suitable clamps for fixing , Fire retardant -Class FV-0 as per IS:11731 Part-II or V-0 as per UL-94. (fixing should be required as per instruction of site supervisor). Suitable clamps for fixing (MS Clamps 02 Sets for each Box with necessary bolts and nuts as per site condition for GI channels/poles as per the directions of Site engineer. | — | — | — | 89,250 | |
| details. | Item Breakup for | — | — | ||
| Supply and fixing of LED Street light fittings of 48 W with suitable driver with all connected materials as per latest CEE spec (The supply includes accessories such as clamps, ties extenstion wires etc for fixing) conforming to IEC 60598-1. | — | — | — | 10,92,750 | |
| details. | Item Breakup for | — | — | ||
| Supply, Laying, Testing and Termination of 1.1 KV Grade 4 core 50 sqmm XLPE insulated PVC sheathed Aluminium armoured cable as per IS 7098(Part 1)1988 with latest amendments and with necassary lugs and terminations. | — | — | — | 2,58,510 | |
| details. | Item Breakup for | — | — | ||
| Supply, Laying, Testing and Termination of LTUG 4 core 25 sqmm XLPE insulated PVC sheathed Aluminium armoured cable as per IS 7098 (Part 1)1988 or latest amendments and with necassary lugs and terminations. | — | — | — | 4,93,152 | |
| details. | Item Breakup for | — | — | ||
| Supply, Laying, Testing and Termination of 1.1 KV Grade 4 core 16 sqmm XLPE insulated PVC sheathed Aluminium armoured cable as per IS 7098(Part 1)1988 with latest amendments and with necassary lugs and terminations. | — | — | — | 10,47,228 | |
| details. | Item Breakup for | — | — | ||
| Supply and Erection of HDPE pipe of 50 mm of PE-100, PN6 class as per IS 4984-2016 with latest amendments and with suitable couplings and clamps for cable laying with all necessary accessories complete. | — | — | — | 5,88,000 | |
| details. | Item Breakup for | — | — | ||
| Supply and Erection of HDPE pipe of 40 mm of PE 63 grade, PN8 as per IS 4984-2016 with latest amendments and with suitable couplings and clamps for cable laying with all necessary accessories complete. | — | — | — | 2,99,250 | |
| details. | Item Breakup for | — | — | ||
| Supply and laying of 8 SWG GI wire with 40 GSM Zink coated, conforming to IS:280- 2006 or latest, it is to be laid with armourd cable for earth continuity. | — | — | — | 1,26,000 | |
| details. | Item Breakup for | — | — | ||
| Supply, Erection and connecting of Cable Junction Boxes IP 65 with metric knockouts for cable entry Cable junction boxes of model no. K 7004 of Hensel make or equivalent make conforming to IS:13573/92, IEC 60947-3 with necessary terminals suitable for cables upto 70Sq mm and all necessary accessories complete. | — | — | — | 88,780 | |
| details. | Item Breakup for | — | — | ||
| Supply, Erection and connecting of Cable Junction Boxes IP 55 / IP 65 with metric knockouts for cable entry Cable junction boxes of model no. K 9255 of Hensel make or equivalent make conforming to IS:13573/92,IEC 60947-3 with necessary terminals suitable for cables upto 25 Sq mm and all necessary accessories complete. | — | — | — | 76,110 | |
| details. | Item Breakup for | — | — | ||
| Design, Fabrication, supply and fixing of 300mm width, 62.5 mm depth, 2mm thick sizes perforated G.I tray (cable Tray) including Horizontal stiffener to avoid sag of tray and vertical bends reducers, tees, cross members and other accessories including fixing with suitable L- Clamps/G.I. Clamps / G.I. angles / G.I. flats and with necessary connected hardware etc | — | — | — | 4,86,600 | |
| details. | Item Breakup for | — | — | ||
| Excavation of cable trench in all types soil of size of size 400mm wide x 1 mtr. deep, and making good of the same to its original form and shape after complete including all connected materials and works up to the satisfaction of the Engineer at Site.The exact route of the HT/LT cable is to be decided in consultation with Engineer in charge. | — | — | — | 4,73,823 | |
| details. | Item Breakup for | — | — | ||
| Excavation of cable trench duly breaking the existing cement concrete flooring and filling with layer of sand bricks etc.,as per the standards of cable laying (A minimum of 1mtr depth and 400 mm width) and filling the trench with soil duly ramming etc.The flooring shall be made good with cement concrete as original by the contractor after completion of trenching work up to the satisfaction of the Engineer at Site.The exact route of the HT/LT cable is to be decided in consultation with Engineer in charge. | — | — | — | 12,18,560 | |
| details. | Item Breakup for | — | — | ||
| Excavation of cable trench under the Track/Road below 3mtrs. horizontal drilling bore with Hydrallic Jack suitable size for provision of 160/110/50mm dia GI/HDPE pipe | — | — | — | 2,15,700 | |
| details. | Item Breakup for | — | — | ||
| Supply and Erection of Power cable route indicators with all connected materials and works as per Drawing No.DEE/CN/BZA/2001/23. | — | — | — | 10,270 | |
| details. | Item Breakup for | — | — | ||
| "Dismantling of Poles (tubular) / Rail Poles/ Octogonal pole and Handling Over to Store." | — | — | — | 59,222.8 | |
| details. | Item Breakup for | — | — | ||
| Supply and running of 32 mm dia, Ivory coloured PVC conduit of wall thickness not lessthan 2 mm with junction boxes, bends and all accessories etc as required as per site requirement. Running of conduit, fixing with suitableclamps and nuts in groove / open /shelter | — | — | — | 46,823.3 | |
| details. | Item Breakup for | — | — | ||
| Supply and Running of 25 mm dia, Ivory coloured PVC conduit ( ISI marked) of wall thickness not less than 2 mm along with junction boxes, bends and all accessories etc. as required as per site requirement. Running of conduit, fixing with suitableclamps and nuts in groove / open /shelter | — | — | — | 47,180.8 | |
| details. | Item Breakup for | — | — | ||
| Provision of concealed wiring with two runs of 1.5 Sq,mm 1100 Volts and one run of flexible copper conductor 1.5 Sq,mm 1100 Volts FRLS PVC insulated wires ISI marked (Phase, neutral and earth)( upto 10 meters lenght) in the PVC conduit pipe with 6A flush modular type switch including 2 way switches where ever required, ceiling rose, bulb holder and modular type plate cover to MS switch control box including all labour charges complete for light points, ceiling fans and exhaust fans points cat walk points and ioh service buidling points etc. accessories. | — | — | — | 60,489 | |
| details. | Item Breakup for | — | — | ||
| Supply, laying, connecting & commissioning of single core multi strand 1.5 sq. mm FRLS Cu. Conductor | — | — | — | 10,800 | |
| details. | Item Breakup for | — | — | ||
| Supply and run of 2 nos, 2.5 sqmm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of 1.5 sqmm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit Pipe conforming to IS 694 (2010) or its latest amendments. | — | — | — | 95,880 | |
| details. | Item Breakup for | — | — | ||
| Supply, running, Connecting of 1 core 10 Sqmm PVC heavy duty insulated mutlti stranded Copper conductor cable with necessary accessories like cable ties etc...IS 694 (2010) with latest amendements. | — | — | — | 2,11,200 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of 40W 4 feet LED tube light with 40W, with all connected accessories complete for fixing (The supply includes accessories such as clamps, ties extenstion wires etc for fixing) as per attached railway specification. | — | — | — | 21,479.25 | |
| details. | Item Breakup for | — | — | ||
| Supply and Erection of of LED flood light fittings 60 W with all connected accessories Model no; JETAIRISFLS150WLED757P2AV2WBLTG as per attached railway specification. | — | — | — | 69,630 | |
| details. | Item Breakup for | — | — | ||
| Supply and Fixing of 4feet 20W LED tube light with Radar motion sensor. The fittings have to be fixed on the wall / Ceiling / FOB with suitable clamps. CCT 5700 K -6200 K Luminious flux : 1400-1600 Lpm , Input Voltage : 100-240 V , 50 Hz Power factor > 0.9, SMD LED 3014:117 Pcs , BEAM angle :180, CRI>71. Ingrees protection: IP20, base : Aluminium alloy housing cover : Forsed , PVC lamp holder : PC /ABS , Action distance : phase 3 t6 m .Suitable Box type fittings for LED lamps has to be supplied by the contractor.Make : Nano, Bright solar, ECP lighting solutions, Procorp earntech pvt ltd, solar innovation & system. LED make as per attached railway specification | — | — | — | 1,13,832 | |
| details. | Item Breakup for | — | — | ||
| Supply and fixing of ON Delay/Interval timer in above junction box of Supply Voltage - 20-240VAC, 50/60Hz Model - 800XU. | — | — | — | 6,358 | |
| details. | Item Breakup for | — | — | ||
| supply and fixing of 3 Pole AC Power Contactor 25 Amp 1 NO 1NC AC 3 PH 415 V Coil Voltage 110 V AC Aux. in above junction box. | — | — | — | 10,681 | |
| details. | Item Breakup for | — | — | ||
| Supply, erection , testing and commissioning of Solar Standalone Street Light system including LED street Light= 36W, with in-built Solar charge controller,1 No SPV Panel =150Wp, 1 No GEL Battery = 75 Ah(2 days Backup), GI Tubular Pole 6M with MPPT(Maximum power point Tracker) (2 Days Backup) with necessary arrangement for foundation. | — | — | — | 4,87,846.26 | |
| details. | Item Breakup for | — | — | ||
| Design, manufacture, display and installation of wall /hanging / floor mounting type LED illuminated sign / direction boards in Full Elliptical(FE), Half Elliptical (HE), SemiElliptical (SE), parabolic /Triangular shape. All the specifications are as per Standard Signages at Stations On Indian Railways- April-2023 or its latest amendment. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site requirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage. | — | — | — | 1,91,128.8 | |
| details. | Item Breakup for | — | — | ||
| Design, manufacture, display and installation of wall /hanging / floor mounting type LED illuminated sign / direction boards in fl a t shape. All the specifications are as per Standard Signages at Stations On Indian Railways- April-2023 or its latest amendment.The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage. | — | — | — | 1,15,640 | |
| details. | Item Breakup for | — | — | ||
| Supply fixing connecting and comissioning of 12 way SPN Distribution board 12 module of model no. 507612 with metal door of legrand make or equivalent make with all connecting accessories complete. | — | — | — | 7,776 | |
| details. | Item Breakup for | — | — | ||
| Supply and fixing of 40 A Electromechanical DP RCBO 30 mA sensitivity as per in accordance with IS 12640-2(2008) or latest with necessary connections and all accessores complete. | — | — | — | 16,654.4 | |
| details. | Item Breakup for | — | — | ||
| Supply and Erection of B curve 16 SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection ISI / CE Marked as per IS/IEC 60898 - 1 or its latest amendments Cat.Nos: 811010 with all connected accessories. | — | — | — | 4,600 | |
| details. | Item Breakup for | — | — | ||
| Supply and Erection of B curve 10A SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection ISI / CE Marked as per IS/IEC 60898 - 1 or its latest amendments Cat.Nos: 811010 with all connected accessories. | — | — | — | 4,600 | |
| details. | Item Breakup for | — | — | ||
| Supply and Erection of B curve 6A SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection ISI / CE Marked as per IS/IEC 60898 - 1 or its latest amendments Cat.Nos: 811010 with all connected accessories. | — | — | — | 19,780 | |
| details. | Item Breakup for | — | — | ||
| Excavation of earth for one pit in any soil and refilling as per Drg.NO. RE/33/P702/ MOD.F | — | — | — | 29,310.37 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of Earth Electrode as per the RDSO Drg No. ETI/OHE/P/ 7021 (MOD.A) or if any latest. Earth electrodes shall be procured from RDSO approved sources only , List of RDSO approved sources is enclosed. | — | — | — | 1,50,201.74 | |
| details. | Item Breakup for | — | — | ||
| Drilling of 26 Nos of 12 mm dia holes on GIpipe dia 50 mm | — | — | — | 14,373.5 | |
| details. | Item Breakup for | — | — | ||
| Supply and Erection of Charcoal | — | — | — | 44,775.9 | |
| details. | Item Breakup for | — | — | ||
| Supply and Erection of Salt | — | — | — | 30,963.1 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of pre fabricated RCC ofsize 0.55m X 0.55M(550mm) with wall thickness of 0.125m(125mm) with height 0.3m (300mm) alongwith RCC (1:4:8) cover with .04m thickness(40mm)and funnel with ire mesh.(as per the Drg No.SC/E/SK-18/2004). | — | — | — | 77,417.54 | |
| details. | Item Breakup for | — | — | ||
| Transportation charges including loading &unloading of earthing arrangements systemmaterial to site / location | — | — | — | 22,120.95 | |
| details. | Item Breakup for | — | — | ||
| Supply, Erection, Testing and Comissioning of Maintenance free earthing with all necessary accessories complete according to IS 3043-1987 and as per RDSO spec No: rdso/spec/ps/0109(rev.0)-2008 Amendment'1'. | — | — | — | 3,72,138 | |
| details. | Item Breakup for | — | — | ||
| Supply, laying and connecting of 25x3mm GI Flat with 40GSM Zink coated, conforming to IS:280-2006 or latest, it is to be laid & connected from equipment to earth electrode for continuity. | — | — | — | 16,500 | |
| details. | Item Breakup for | — | — | ||
| Supply and Erection of 50mm dia GI Pipe 'B' class with threaded at both ends up to 75mm length with coupling/flanges complete confirming to IS: 1239 (Part-I) 2004 with its latest amendments. | — | — | — | 36,600 | |
| details. | Item Breakup for | — | — | ||
| Supply and fixing of 20W 4 feet LED tube light with all connected accessories complete for fixing (The supply includes accessories such as clamps, ties extenstion wires etc for fixing) as per attached railway specification. | — | — | — | 32,378.3 | |
| details. | Item Breakup for | — | — | ||
| Provision of mobile Charging Arrangements with following accessories (i)3 x 6 Amps one way modular switch (as perIS 3854:1997) of makes Havells/Legrand/GM/Goldmedal. (ii)3 x International Socket 13/6 Amps of makes Havells/ Legrand /GM/Goldmedal (iii)1 x 16A SP MCB, of Makes:Havells/GM/ Legrand/Goldmedal (iv) 12 module or suitable Plastic Enclosures with Cover plate for Surface Mounting of makes Havells/Legrand/GM/Goldmedal,fixing of charging point on the wall complete including connections with all other connected materials and works. (v) Supply and fixing of 02 No's of dummy plates in the 12 modular plastic encloseure including Fixing of Charging point on the Wall/Pillers/Structure with suitable clamps/ rag bolts etc complete including all other connected materieals and accessories. | — | — | — | 32,430 | |
| details. | Item Breakup for | — | — | ||
| Supply and installation of high quality statinless steel mobile charging stand to provide at staions made stainless steel (2 mm thick)material with dimension 24cm*22cm* 4cm which is light weigt and tough at the same time look bright and elegant with mirror polish with three screw holes to easily fix on wall /pillar structure with suitable clamps/rag bolts etc complete. | — | — | — | 12,000 | |
| details. | Item Breakup for | — | — | ||
| Supply and fixing of Metal Flush Box-12 module of model no:JIM 12 008 of GM FOURFIVE make with 12 module cover plate With support frame) of model no:PK SB 12 007 - CASABLANCA of GM make or equivalent make comply with IEC 60669-1including all accessories complete. | — | — | — | 2,085 | |
| details. | Item Breakup for | — | — | ||
| Supply and fixing of 120W LED Flood light fitting as per attached railway specification with all connected materials complete as per attached railway specification. | — | — | — | 63,786.35 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Technicalspecifications--9-26.pdf
ATTACHMENT
Scopeofworkforwiring.pdf
ATTACHMENT
CEGETechnicalCircular07-04-2022_compressed.pdf
ATTACHMENT
ListofLikelySuppliers.pdf
ATTACHMENT
GCC_April-2022WithCorrectionSlips._compressed.pdf
ATTACHMENT
RlyBd-JPO-DiggingofCables2013-Re-Circulatedin2022-LATEST.pdf
ATTACHMENT
EarthingSpecificationMFEandOther.pdf
ATTACHMENT
RITESInspection.pdf
ATTACHMENT
FirepreventionGuideline.pdf
ATTACHMENT
NITIREPSWorks43.pdf
ATTACHMENT
Bifurcationdetailsofstations_1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .