J&K

Active

Works

Machineries/ Mechanical Engg Items

eNIT No MICD 29 of 2026-27 Dated 29.09.2026 works under M and E Programme

I and FC

Ghoom Ahmad Pora Baramulla | Baramulla, Jammu And Kashmir

Amount: ₹1.4 LCloses: 10 Oct 2026

Timeline

Published29 Sept 2026
Closes10 Oct 2026
Bid Opening10 Oct 2026

Tender Value

₹1.4 L

EMD Value

₹2,800

Closing Date

10 Oct 2026, 11:00 am

Tender Inviting Organisation

Name

Executive Engineer MICD Srinagar

Address

Executive Engineer MICD Gogji Bagh Srinagar

Work Description

Replacement of Worn-out 10000 GPH discharge, 150 Meters of dynamic head submersible pumping units at Tube Well Irrigation scheme Ghoom Ahmad Pora Baramulla.

Tender Information

Tender ID

2026_IFC_326446_1

Reference Number

e- NIT No. MICD 29 OF 2026-27 Dated 29-09-2026

Tender Type

Open Tender

Product Category

Machineries/ Mechanical Engg Items

Form of Contract

Item Rate

Period of Work

20 days

Location

Ghoom Ahmad Pora Baramulla

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

20 documents required · 20 mandatory

Fee/PreQual/Technical

RequiredBid Security (EMD) of Rs. 2800/- (.pdf)

RequiredCost of Tender Document of Rs. 500/- (.pdf)

RequiredValid GST registration (.pdf)

RequiredValid PAN registration (.pdf)

RequiredGovernment Contractor Registration as per appendix -I (.pdf)

RequiredDebarment/Blacklisting certificate as per appendix II (.pdf)

RequiredSite visit declaration as per appendix- III (.pdf)

RequiredTurn over certificate from CA (.pdf)

RequiredUndertaking for acceptance of Departments Decision (.pdf)

RequiredUndertaking for accepting eNIT terms and conditions (.pdf)

RequiredUndertaking for accepting/ confirming all terms, conditions and specifications detailed in all annex (.pdf)

RequiredRelevant Experience certificate (.pdf)

RequiredAccepted copy of all Annexures including Corrigendums (.pdf)

RequiredBidders Confirmation of Annexure B, C, D and E. (.pdf)

RequiredTechnical data sheets/ brochures/OEM catalogue/installation (.pdf)

RequiredUndertaking in case for design responsibility as per appendix VII (.pdf)

RequiredUndertaking for work completion as per appendix VIII (.pdf)

RequiredUndertaking for the authentication of the documents and information submitted as per the Appendix IX (.pdf)

RequiredUndertaking as per appendix X for GST linked bank account number (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹500

Tender Fee Payable To

Executive Engineer MICD Srinagar

EMD Fee Amount

₹2,800

Important Dates

Last Activity

29 Sept 2026

Published

29 Sept 2026

Bid Opening

10 Oct 2026

Download Starts

29 Sept 2026

Download Ends

10 Oct 2026

Submission Starts

29 Sept 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (1 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Providing, Installation, Testing & Commissioning of submersible type of pumping equipment at TWIS Ghoom Ahmadpora. • Discharge : 10000GPH • Nominal Head : 150 Mtrs • Speed : As given by the manufacturer or 2900 RPM Synchronous • Method of starting : Star - Delta • Frequency : 50 Hz • Voltage : 3 Phase Ac Supply, 380±10% • HP: Not less than 35 Hp The bowl plate shall be provided with name plate giving following details/information. • Name of the manufacture or trade mark. • Serial no of pump set. • Pump Type. • No. of stages. • Total Head and Discharge The pump/motor shall be constructed of following: - • Impeller – Bronze or (SS-AISI 304/316) • Pump Shaft – Stainless Steel • Motor Shaft-Stainless Steel • Pump Bowl- High Grade Cast Iron The motor shall be made of corrosion resistant materials to resist corrosion under normal conditions and the motor shall have a name plate giving following information. • Name of manufacturer. • Manufactures number and frame. • Type of duty. • Frequency in HZ. • Number of phases. • Rated output in KW/HP. • Rated voltage. • Approximate current in amp at rated output • Speed in rev/min at rated output. • Pump Dia: The outer dia of pumping unit shall not exceed 200mm. • The performance chart is to be provided with the pump along with material of construction chart. Fabrication, providing and fitting of M.S pump connector dully flanged on one side, which shall be fitted with the pump out let. The connector should be suitable. The pumping unit shall be lowered with the column pipe and shall be tested thereafter.	1	Set	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.65 MB

Work Item Documents

BOQ_1104246.xls

BOQ • 0.25 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Providing, Installation, Testing & Commissioning of submersible type of pumping equipment at TWIS Ghoom Ahmadpora. • Discharge : 10000GPH • Nominal Head : 150 Mtrs • Speed : As given by the manufacturer or 2900 RPM Synchronous • Method of starting : Star - Delta • Frequency : 50 Hz • Voltage : 3 Phase Ac Supply, 380±10% • HP: Not less than 35 Hp The bowl plate shall be provided with name plate giving following details/information. • Name of the manufacture or trade mark. • Serial no of pump set. • Pump Type. • No. of stages. • Total Head and Discharge The pump/motor shall be constructed of following: - • Impeller – Bronze or (SS-AISI 304/316) • Pump Shaft – Stainless Steel • Motor Shaft-Stainless Steel • Pump Bowl- High Grade Cast Iron The motor shall be made of corrosion resistant materials to resist corrosion under normal conditions and the motor shall have a name plate giving following information. • Name of manufacturer. • Manufactures number and frame. • Type of duty. • Frequency in HZ. • Number of phases. • Rated output in KW/HP. • Rated voltage. • Approximate current in amp at rated output • Speed in rev/min at rated output. • Pump Dia: The outer dia of pumping unit shall not exceed 200mm. • The performance chart is to be provided with the pump along with material of construction chart. Fabrication, providing and fitting of M.S pump connector dully flanged on one side, which shall be fitted with the pump out let. The connector should be suitable. The pumping unit shall be lowered with the column pipe and shall be tested thereafter.

Set