Re-development of Town Hall At Gandhidham.(4th Attempt)

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

Demolition including stacking of serviceable materilas and disposal of

1 unserviceable materials with all lead and lift. (i) R.C.C. work 72.00 Cum 1082.35

Demolition of Brick work and stone masonry including stacking of

2 serviceable materilas and disposal of unserviceable materials with all 17.00 Cum 562.89

lead and lift.(ii) In Cement Mortar.

Removing and scraping of old deteriorated plaster of any thickness

fromm wall / R.C.C member including stacking of serviceable material

and disposal of unserviceable from site of work with all lead and lift

Dismentaling tiled of stone floors laid in mortar including stacking of

4 serviceable materilas and disposal of unserviceable materials with all 4303.00 Sqm 49.12

Dismentling doors, windows, ventilators etc. (wood or steel) shutters

including chowkhats architraves, holdfasts and other attachment etc.

complete and stacking them within all

lead and lift.(i) Not exceeding 3 Sq.M. in area.

Dismentling doors, windows, ventilators etc. (wood or steel) shutters

including chowkhats architraves, holdfasts and other attachment etc.

complete and stacking them within all

lead and lift.(i) exceeding 3 Sq.M. in area.

Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with fittings

7 and clamps including stacking the materials with all lead and lift ( for any 500.00 Rmt 76.68

Dismantling santtary fittings like wash basin . W.C. pan Indian and

8 European type, flushing tank etc. including stacking the materials with 50.00 Each 414.23

all lead and lift.

Excavation for foundation upto 1.5 m depth including sorting out

9 and stacking of useful materials and disposing off the excavated 92.00 Cum 122.94

stuff upto 50 Meter lead.(A) Loose or soft soil

Excavation for foundation upto 1.5 m depth including sorting out

10 and stacking of useful materials and disposing off the excavated 183.00 Cum 157.33

stuff upto 50 Meter lead.(B) Dense or Hard soil

Excavation for foundation upto 1.5 m depth including sorting out

11 and stacking of useful materials and disposing off the excavated 183.00 Cum 267.08

stuff upto 50 Meter lead.(C) Hard Murrum

Excavation for foundation for depth from 1.5 m to 3.0 m including

sorting out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(B) Dense or Hard soil

Excavation for foundation for depth from 1.5 m to 3.0 m including

sorting out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead. (C) Hard Murrum

Excavation for foundation for depth from 3.0 m to 5.0 m including

sorting out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(B) Dense or Hard soil

Excavation for foundation for depth from 3.0 m to 5.0 m including

sorting out and stacking of useful materials and disposing of the

excavated stuff upto 50 Meter lead.(C) Hard Murrum

Excavation for foundation for depth from 3.0 m to 5.0 m including

sorting out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(D) Soft rock not requiring

Filling available excavated earth (excluding rock) in trenches.

plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth

consolidating each disposited layer by ramming and watering.

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

Filling in foundation and plinth with murrum or selected soil in layers of

18 20cm. thickness including watering, ramming and consolidating etc. 609.00 Cum 269.75

Uncoursed Rubble Masonry with hard stone of approved quality in

19 foundations and plinth in Cement Mortar 1:5 (1cement : 5-coarse sand 110.00 Cum 2628.91

including levelling up etc. complete

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand

: 4- graded stone aggregates 20 mm nominal size) and curing complete

excluding cost of formwork in (A) Foundation and Plinth

Providing and laying cement concrete flooring 1:2:4 (1cement : 2-

coarse sand : 4-graded stone aggregate 20mm nominal size) laid in one

layer and finished with a floating coat of neat cement and Water

Proofing Chemical. (B) 50mm thick.

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and excluding cost of

reinforcement for reinforced concrete work in (A) Foundations,

footings and Mass concrete

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (D) Columns, Pillars posts

and struts, upto Plinth level.

Anti-Termite System:Providing and laying of permanent piping

technology anti-termite treatment before flooring work by installing

LLDP (Low linear density polyethylene) tube of 8 mm O.D. & 6.4 mm

1.D. with inbuilt pressure compensation chip every 30 cm interval in the

tube, having working pressure of 2 Kg/cm2 and release rate of

Itr/hour fixed by P-clips and nails. The LLDP pipe shall be installed at the

entire periphery of the building and at internal network of building at a

depth of 20 to 200 mm under floor at every 2 to 3 mtr. c/c distance

(adjusted as per building layout ) & Ends of loop pass through a PVC

elbow of minimum 32 mm ID at junction box of wall and floor level,

entering into a steel reinforced grooved flexible pipe of minimum

mm ID leading into junction box and the loops shall terminate in

junction boxes & test every junction during injecting chemicals for

termite control treatment. The anti termite chemical Imidacloprid

30.5% SC mix as per IS-6313 (part III) shall be injected by the pressure

pump diluted with water @ 10.5 ml/5 ltr of water at the rate of

Kg/sq.cm @ 5 Ltr/SMT. The contractor shall submit approved line plan

for piping system and junction boxes dully approved by Engineer-in-

Charge with bond of 5 year warranty.(i)Anti Termite chemical injected

area (Chemical injecting incl. labour cost

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (C) Plinth Beams.

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (D) Columns, Pillars posts

and struts upto Ground floor.

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (D) Columns, Pillars posts

and struts upto First floor.

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (D) Wall For Below Plinth

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (C) Slab Beams upto

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (C) Slab upto Ground

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork and excluding the cost of

31 reinforcement for reinforced concrete work in (C) Lintels upto Ground 1.00 Cum 6363.00

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (C) Lintels upto First

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (C) Lintels upto Second

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (C) Lintels upto Third

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (C) Chajjah upto Ground

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (C) Chajjah upto First

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (C) Chajjah upto Second

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (C) Chajjah upto Third

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including

39 bending, binding and placing in position complete upto below plinth 31820.00 Kg. 77.29

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including

40 bending, binding and placing in position complete upto ground floor 30355.00 Kg. 77.29

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including

41 bending, binding and placing in position complete upto first floor 6705.00 Kg. 78.34

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including

42 bending, binding and placing in position complete upto Second floor 900.00 Kg. 79.39

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including

43 bending, binding and placing in position complete upto Third floor 900.00 Kg. 80.44

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:5. (1- Cement : 5 -fine sand)(B) Conventional

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in superstructure above plinth

level upto Ground floor in Cement Mortar 1:5. (1- Cement : 5 -fine

sand) (B) Conventional

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in superstructure above First floor

in Cement Mortar 1:5. (1- Cement : 5 -fine sand) (B) Conventional

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in superstructure above Second

floor in Cement Mortar 1:5. (1- Cement : 5 -fine sand) (B) Conventional

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in superstructure above Third floor

in Cement Mortar 1:5. (1- Cement : 5 -fine sand) (B) Conventional

Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1-

49 Cement : 4 -coarse sand ) in superstructure above plinth level upto 18.00 Sq.mt. 684.26

Ground floor (B) Conventional

Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1-

Cement : 4 -coarse sand ) in superstructure above plinth level upto

First floor. (B) Conventional

Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1-

Cement :4 -coarse sand ) in superstructure above First Floor level upto

Second floor. (B) Conventional

Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1-

Cement :4 -coarse sand ) in superstructure above First Floor level upto

Third floor. (B) Conventional

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering upto

Ground floor and finished even and smooth in (iii) Cement mortar 1:3

(1-cement:3-sand)

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering First floor

and finished even and smooth in (iii) Cement mortar 1:3 (1-cement:3-

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering Second

floor and finished even and smooth in (iii) Cement mortar 1:3 (1-

Providing 10mm thick cement plaster in single coat on concrete ceilings

and sofits of stairs for interior plastering upto Ground floor and finished

even and smooth in. (i) Cement mortar 1:3 (1-cement:3-sand)

Providing 10mm thick cement plaster in single coat on concrete ceilings

and sofits of stairs for interior plastering upto First floor and finished

even and smooth in. (i) Cement mortar 1:3 (1-cement:3-sand)

Providing 10mm thick cement plaster in single coat on concrete ceilings

and sofits of stairs for interior plastering upto Second floor and finished

even and smooth in. (i) Cement mortar 1:3 (1-cement:3-sand)

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for exterior plastering upto

ground floor and finished even and smooth in (i) Cement mortar 1:3 (1-

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for exterior plastering upto First

floor and finished even and smooth in (i) Cement mortar 1:3 (1-

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for exterior plastering upto

Second floor and finished even and smooth in (i) Cement mortar 1:3 (1-

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for exterior plastering upto

Third floor and finished even and smooth in (i) Cement mortar 1:3 (1-

Supply & fixing of Decorative Natural Type ARTIFICIAL STONE CLADDIN

on exterior walls up to any height above ground level laid over on

based coat of 15mm cement plaster With Chemical(ISI) and jointed with

63 grey cement slurry with matching pigment incl. rubbing and polishing 50.00 Sq.mt 3841.03

half rounding edge etc. complete colour and shades approved by

engineer in charge.

Providing and laying Texture Plaster on exterior walls up to any height

above ground level on based coat of 15mm cement plaster smooth

64 surface, layer with 3mm styrene acrylic polimer based material as per 350.00 Sq.mt 533.28

approved pattern complete as per specification and direction by

engineer in charge.

Making and finishing Decorative Groove Work in exterior plastering

Providing cement vata (10cm. x 10 cm. size) quarter round in cement

66 mortar 1:1 including neat cement finishing, watering etc. complete. 98.00 R mt 24.28

67 Providing and Fixing Chicken Mess Jali 200.00 Sqm 188.87

Providing and fixing single layer waterproof gypusm board 12.5 mm

thick of the make Newgood Group Co. Ltd. or equivalent & Newgood

Group Co. Ltd. company sections using waterproof board of size

mm x 1830 mm x 8.0 mm suspended by G.I suapender of size 25 mm x

mm with intermediate channel of size 18 mm x 40 mm x 0.80 mm at

1220 mm center to center ceiling section of size 40 mm x 35 mm x

68 mm at 457 mm center to center and perimetre chanel A of size 20 mm x 285.00 Sqm 606.95

27 mm x 30 mm x 0.50 mm at edges & drops including paper tap sand

sofit cleat, anchor fastener, scoch bolt connecting cleat joining

compound top coat on ceiling including making necessary opening for

light fitting, diffuser etc. complete as per detail drawing as directed.

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

Providing and fixing false ceiling at all height including providing and

fixing of frame work made of special sections, power pressed from M.S.

sheets and galvanized with zinc coating of 120 gms/sqm (both side

inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm

wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm

centre to centre, one flange fixed to the ceiling with dash fastener

mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to

the angle hangers of 25x10x0.50 mm of required length with nuts &

bolts of required size and other end of angle hanger fixed with

intermediate G.I. channels 45x15x0.9 mm running at the spacing of

1200 mm centre to centre, to which the ceiling section 0.5 mm thick

bottom wedge of 80 mm with tapered flanges of 26 mm each having

lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction

perpendicular to G.I. intermediate channel with connecting clips made

out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including

fixing perimeter channels 0.5 mm thick 27 mm high having flanges of

mm and 30 mm long, the perimeter of ceiling fixed to wall/partition

with the help of rawl plugs at 450 mm centre, with 25mm long dry wall

screws @ 230 mm interval, including fixing of gypsum board to ceiling

section and perimeter channel with the help of dry wall screws of size

3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush

finish of tapered and square edges of the board with recommended

Perforated , jointing

Plaster , finishing

Board of sizewith

1200jointing compound

having approx. 15 % perforated area with perforation size and pattern

as approved by the Engineerin-charge and as per manufacturer's

specification, with all 4 side tapered and backed by acoustical tissue

with NRC value not less than

Providing and fixing PVC plain colour false ceiling with grid type with alu

frame consisting of 600 mm x 600mm 3mm thick plain PVC sheet used

as panel insert in a frame work made using anodized alluminium T

section of size 1” x 1” (25 x 25mm, 19 gauge or 1mm thick) in square

pattern of grid sizes of 2 x 2 (600 x 600mm). The alluminium frame work

is supported from the ceiling with the help of G.I. hook and G.I.

70 wire/6mm M.S. rods of required sizes to maintain proper level etc. The 108.00 Sqm 303.12

aluminium frame work is supported on side wall with the use of

alluminium L section of size 1 x 1 (25 x 25mm) angles et. Complete as

per direction of Engineer in charge. Manufactures, specification and

P & L 32" x 32" vitrified 10 to 12 mm thick tile flooring over 20 mm

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new

surface by adhesive material including 5 mm spacer joint filled with

71 epoxy grout including finised with flush pointing & cleaning the surface 50.00 sq m 1318.05

etc. complete. (Tiles Shall be Double charge/GVT/PGVT and Glossy or

Matt Finish as per directed by engineer in charge/Project Architect.)

Providing and laying 32" x 32" Vitrified tiles 10 to 12 mm thick , in

skrting risers of steps and on Wall on 10mm thick cement plaster 1:3 (1-

cement : 3-coarse sand) and including 5 mm spacer joint filled with

72 epoxy grout. (Tiles Shall be Double charge/GVT/PGVT and Glossy or 50.00 sq m 1392.79

Matt Finish as per directed by engineer in charge/Project Architect.)

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average)

base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or

fixing on existing flooring by adhesive material including dismentaling of

73 existing flooring and jointed with color cement slurry including finised 1620.00 Sq mt 1476.54

with flush pointing & cleaning the surface etc. complete for light shade

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in skrting

risers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement :

3-coarse sand) and jointed with white cement slurry

Providing and laying white glazed tiles 6mm thick in flooring treads of

steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-

cement : 3-coarse sand ) finishing with flush pointing in white cement.

Providing and laying white glazed tiles 6mm thick in skrting risers of

76 steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse 123.00 sq m 1127.48

sand) and jointed with white cement slurry

Providing and laying 18 mm thick polished granite stone machine cut in

flooring, tread of steps over 20 mm (avg.) thick base of Cement Mortar

1:6 (1 Cement : 6 Coarse sand) and jointed with grey cement slurry with

77 matching pigment incl. rubbing and polishing half rounding edge etc. 194.00 sq mt 3260.28

complete colour and shed as approved by architect engineer in charge.

Providing and laying 18 mm thick polished granite stone machine cut in

single piece (Max. available) in Risers of Step, dado, Pillars, Sill and

Jambs of door/window laid over 10 mm thick cement mortar 1 : 3 (1

cement : 3 coarse sand) With Chemical and jointed with grey cement

78 slurry with matching pigment incl. rubbing and polishing half rounding 107.00 sq mt 3368.35

edge etc. complete colour and shedas approved by architect engineer in

Providing and laying polished Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or

L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with

grey cement slurry mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete. (A) 25mm thick

Supply & Fixing of both side Polished Kota Stone of required size &

mm thickness as instructed to fixed in Platform / CupBoard with cement

80 mortar 1:3 (1 Cement : 3 Sand) etc. as per instructed by engineer in 25.00 sq mt 616.10

Supply & Fixing of Polished on both sides of Granite Stone in thickness

of 15-20 mm to fix as Urinal Curtain and as per instruction machine cut

should be done on this Granite in all three sides

Providing & constructing of Sandwitch type Platform of 60cm. width and

80 cm. height with Granite slab (18 to 20mm) on top resting on one side

polished kotah stone 25 mm thick top and 1 nos of 25mm thick polished

kotah stone vertical support fixing by making grooves including 75 mm

82 wide facing patti with external edge of the patti shall be finished with 8.00 Rmt. 2370.47

Quarter round molding & mirror polished etc. completed with cutting

hole as per sink size as directed by an architect.

Providing & constructing of Platform of 60cm. width and 80 cm. height

with Granite slab (18 to 20mm) on top resting brick wall and fixing by

making grooves including 75 mm wide facing patti with external edge of

the patti shall be finished with Quarter round molding & mirror polished

etc. completed with cutting hole as per wash basin size as directed by an

Applying two coats of Birla or Asian acrylic lapy ( putty) & two coats of

primer of approved brand and manufacture on new wall surface to give

84 an even shade including thoroughly brushing the surface free from 5390.00 sq mt 40.59

mortar dropping and other foreign matter and sand papered smooth.

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

Wall painting (two coats) with plastic emulsion paint of approved brand

and manufacture on undecorated wall surface to give an even shade

85 including throughly brushing the surface free from mortar droppings 5390.00 sq mt 84.37

and other foreign matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains of loose

powdered materials.etc complete

Applying priming coat and Painting two coats on new steel and other

metal surface with enamel paint over after and including preparing the

surface by throughly cleaning, oil,grease, dirt and other foreign matter

and scoured with brushes fine steel wood, scrapers and sand paper with

ready mixed priming paint brushing red lead.

Painting lines, deashes, arrows, letters etc on roads, Air fields and like

in two coats with road marking paint, brushing including cleaning the

surface of all dirt, dust and other foreign matter. (ii) Upto 10 cm in

width as directed by EIC/ consultant.

Providing and fixing window having extruded aluminum Colour Powder

Coated section frame main outer size 95mm x 24mm x 1.17mm @ wt.of

0.738 Kg/mt, horizontal Three track member size 92mm x 31.75mm x

1.30mm @ Wt.1.07 Kg/mt, vertical member of size 92mm x 31.75mm x

1.50mm ,@ Wt. 1.06 Kg/mt with sliding shutters of horizontal member

size 40 mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, vertical member of

size 40mm x 18mm x 1.29 mm @ wt.of 0.456Kg/mt with two shutter

mm thick transparent bronze colour tinted float glass and one Shutter

Fiber Mosquito Mesh with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame as per

Providing and fixing standared extruded of alluminium section of size

63mm x 38.10mm x 1.2mm , @ Wt. 0.643 Kg/mt with colour Powder

Coated alluminium frame for ventilation with 5 mm thick frosted glass

as details etc complete for Ventilation

Supply & Fixing of 24 mm thick WPC Decorative Door with one side plain

and one side CNC Cut Design including cost of all necessary fitting, as

per instruction of PMC/ Engineer in charge etc complete.

Providing and fixing IS marked Flush Door 35mm thk. wooden beading

of ghana wood and size 35x6 mm, including both side Laminated sheet

of decorative type with high density protective surface and riverce side

adhesive bonding quality and 1 mm thickness and laminated of beading

area with same laminate, including approved brand of stainless steel

fixtures like two nos Stopper , two nos Handle of S.S. Pipe Handle for

door 30 Cm size of ASIS 316 Grade , and approved brand of latch lock

with ss butt hinge of approved quality and ss screw etc complete. (35

mm thickness excluding lamination thickness)

Providing and fixing IS marked 15mm thk. Plywood with Single side

Laminated sheet of decorative type with high density protective surface

93 and riverce side adhesive bonding quality and 1 mm thickness including 52.00 Sq mt 2020.00

making groove for lock and stopper including all for Door Frame of Flush

Providing and fixing M.S. grills of required pattern to wooden frames of

windows etc. with M.S. flats at required spacings and frame alround,

square or round bars with round headed bolts and nuts or by screws (A)

Supply & Fixing of Stair Hand Railing S.S. Pipe 50mm Dia. Only Single

Pipe With fiting comp. as directed by EIC/ consultant.

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

Providing & fixing S.S Railing work 304 Grade of 50 mm dia at Top run

with 40 mm X 40 mm vertical Squre pipe and 3 Nos 15 mm dia

Horizontal Pipe with all necessary fittings etc. complete as per

Architect/ Site engineer's instructions.

Steel work, riveted in built up sections framed work including cutting,

hoisting, fixing in position and applying a priming coat of red lead paint.

(A) In beams and joists, channels angles Tees, flats, with connecting

plates or angle cleats as in main and cross beams. Hip and jack rafters,

purlins conneted to common rafters and the like.

Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished

iron J or L Hooks, Bolts and nuts 8mm diameter with bitumen and G.I.

98 limpet washer or G.I. limpet washer. filled with white lead complete 43.00 Sq.mt. 734.19

excluding the cost of purlins, Rafters and Trusses.(1) 0.80 mm thick

Providing and laying broken china mosaic flooring for terrace using

12 mm to 20 mm broken pieces of glazed tiles to be laid over cement

mortar 1:3 to plain or slope and to be tempered to bring mortar

99 creme out upto surface using white cement including rounding off 1575.00 sq mt 779.70

junctions and extending them upto 15 cm along the wall,clearing with

water and oxalic acid etc. as directed.

Roller Blinds Providing and Fixing Impulse Blackout Roller Blinds with

fabric of 0.53mm thickness and Top channel of non-rusting aluminium

alloy with 1.25mm thickness and bottom channel of 1.50mm thickness

& 21mm diameter. Tilt channel of ABS plastic with 1.50mm polyster

cord with 4.50mm balls with stop lock arrangement including all

necessary fixture, fastners, fittings, labour material machinary etc

complete as seletced and diretced by Engineer Incharge.

Supply & Fixing of 3mm Aluminium Composite Panel work with Pipe

101 Framing work including cost of all necessary fitting, as per instruction of 156.00 SqMt 2982.53

PMC/ Engineer in charge etc complete.

Supply & Fixing of 3mm Wooden Aluminium Composite Panel work with

Pipe Framing work including cost of all necessary fitting, as per

instruction of PMC/ Engineer in charge etc complete.

Providing and Fixing dry cladding upto 10 meter height with 30mm thick

gang saw cut stone with machine cut edges of uniform colour and size

upto 1mx1m, fixed to structural steel frame work and/or with the help

of cramps, pins etc. and sealing the joints with approved weather

sealant as per Architectural drawing and direction of Engineer in

charge.(The steel frame work, stainless steel cramps and pins etc. shall

be paid for separately) (i) Red sand Stone -30 mm thick gang saw cut

External Road, Parking & Compound Wall

Excavation for foundation upto 1.5 m depth including sorting out

104 and stacking of useful materials and disposing off the excavated 4316.00 Cum 122.94

stuff upto 50 Meter lead.(A) Loose or soft soil

Excavation for foundation upto 1.5 m depth including sorting out

105 and stacking of useful materials and disposing off the excavated 315.00 Cum 157.33

stuff upto 50 Meter lead.(B) Dense or Hard soil

Excavation for foundation upto 1.5 m depth including sorting out

106 and stacking of useful materials and disposing off the excavated 473.00 Cum 267.08

stuff upto 50 Meter lead.(C) Hard Murrum

Excavation for foundation for depth from 1.5 m to 3.0 m including

sorting out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead. (C) Hard Murrum

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

Filling available excavated earth (excluding rock) in trenches.

plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth

consolidating each disposited layer by ramming and watering.

Filling in foundation and plinth with murrum or selected soil in layers of

109 20cm. thickness including watering, ramming and consolidating etc. 6522.00 Cum 269.75

Rolling and consolidation of soling including filling in depression which

110 occur during the process, with power roler 8 tonne to 12 tonne 5000.00 SqMt 22.75

Rolling and consolidation using vibratory road roller 8 - 10tonne

111 capacity (incl. watering)(A) Earth work (layer not exceeding 200mm 2079.00 Cum 33.09

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand

: 4- graded stone aggregates 20 mm nominal size) and curing complete

excluding cost of formwork in (A) Foundation and Plinth

Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand

: 6- Graded brick bat aggregate 40mm normal size) and curing complete

excluding cost of formwork in (A) Foundation and Plinth

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and excluding cost of

reinforcement for reinforced concrete work in (A) Foundations,

footings and Mass concrete

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (D) Columns, Pillars posts

and struts, upto Plinth level.

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (C) Plinth Beams.

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (D) Columns, Pillars posts

and struts upto Ground floor.

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (C) Slab Beams upto

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (C) Base/Grade Slab at

Ground floor level

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (C) Slab upto Ground

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork and excluding the cost of

121 reinforcement for reinforced concrete work in (C) Lintels upto Ground 1.00 Cum 6363.00

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (C) Chajjah upto Ground

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including

123 bending, binding and placing in position complete upto below plinth 15415.00 Kg. 77.29

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including

124 bending, binding and placing in position complete upto ground floor 21347.00 Kg. 77.29

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:5. (1- Cement : 5 -fine sand)(B) Conventional

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in superstructure above plinth

level upto Ground floor in Cement Mortar 1:5. (1- Cement : 5 -fine

sand) (B) Conventional

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering upto

Ground floor and finished even and smooth in (iii) Cement mortar 1:3

(1-cement:3-sand)

Providing 10mm thick cement plaster in single coat on concrete ceilings

and sofits of stairs for interior plastering upto Ground floor and finished

even and smooth in. (i) Cement mortar 1:3 (1-cement:3-sand)

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for exterior plastering upto

ground floor and finished even and smooth in (i) Cement mortar 1:3 (1-

Supply & fixing of Decorative Natural Type ARTIFICIAL STONE CLADDIN

on exterior walls up to any height above ground level laid over on

based coat of 15mm cement plaster With Chemical and jointed with

grey cement slurry with matching pigment incl. rubbing and polishing

half rounding edge etc. complete colour and shades approved by

engineer in charge.

Providing and laying Texture Plaster on exterior walls up to any height

above ground level on based coat of 15mm cement plaster smooth

131 surface, layer with 3mm styrene acrylic polimer based material as per 1301.00 Sq.mt 267.65

approved pattern complete as per specification and direction by

engineer in charge.

Making and finishing Decorative Groove Work in exterior plastering

133 Providing and Fixing Chicken Mess Jali 50.00 Sqm 188.87

P & L 32" x 32" vitrified 10 to 12 mm thick tile flooring over 20 mm

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new

surface by adhesive material including 5 mm spacer joint filled with

134 epoxy grout including finised with flush pointing & cleaning the surface 1.00 sq m 1318.05

etc. complete. (Tiles Shall be Double charge/GVT/PGVT and Glossy or

Matt Finish as per directed by engineer in charge/Project Architect.)

Providing and laying 32" x 32" Vitrified tiles 10 to 12 mm thick , in

skrting risers of steps and on Wall on 10mm thick cement plaster 1:3 (1-

cement : 3-coarse sand) and including 5 mm spacer joint filled with

epoxy grout. (Tiles Shall be Double charge/GVT/PGVT and Glossy or

Matt Finish as per directed by engineer in charge/Project Architect.)

Providing and laying 18 mm thick polished granite stone machine cut in

single piece (Max. available) in Risers of Step, dado, Pillars, Sill and

Jambs of door/window laid over 10 mm thick cement mortar 1 : 3 (1

136 cement : 3 coarse sand) With Chemical and jointed with grey cement 4.00 sq mt 3368.35

slurry with matching pigment incl. rubbing and polishing half rounding

edge etc. complete colour and shedas approved by architect engineer in

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

Applying two coats of Birla or Asian acrylic lapy ( putty) & two coats of

primer of approved brand and manufacture on new wall surface to give

137 an even shade including thoroughly brushing the surface free from 30.00 sq mt 40.59

mortar dropping and other foreign matter and sand papered smooth.

Wall painting (two coats) with plastic emulsion paint of approved brand

and manufacture on undecorated wall surface to give an even shade

138 including throughly brushing the surface free from mortar droppings 30.00 sq mt 84.37

and other foreign matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains of loose

powdered materials.etc complete

Applying priming coat and Painting two coats on new steel and other

metal surface with enamel paint over after and including preparing the

surface by throughly cleaning, oil,grease, dirt and other foreign matter

and scoured with brushes fine steel wood, scrapers and sand paper with

ready mixed priming paint brushing red lead.

Painting lines, deashes, arrows, letters etc on roads, Air fields and like

in two coats with road marking paint, brushing including cleaning the

surface of all dirt, dust and other foreign matter. (ii) Upto 10 cm in

width as directed by EIC/ consultant.

Supply & Fixing of 24 mm thick WPC Decorative Door with one side plain

and one side CNC Cut Design including cost of all necessary fitting, as

per instruction of PMC/ Engineer in charge etc complete.

Providing and laying cement concrete flooring 1:2:4 (1cement : 2-

coarse sand : 4-graded stone aggregate 20mm nominal size) laid in one

layer and finished with a floating coat of neat cement and Water

Proofing Chemical. (B) 50mm thick.

Providing and laying broken china mosaic flooring for terrace using

12 mm to 20 mm broken pieces of glazed tiles to be laid over cement

mortar 1:3 to plain or slope and to be tempered to bring mortar

144 creme out upto surface using white cement including rounding off 6.00 sq mt 779.70

junctions and extending them upto 15 cm along the wall,clearing with

water and oxalic acid etc. as directed.

Construction of granular sub-base by providing close graded material,

spreading in uniform layers with motor grader on prepared surface,

145 mixing by mix in place method with rotavator at OMC and compacting 1664.00 Cum 760.53

with vibratory roller to achieve the desired density complete (Grade-I)

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking

concrete block 60mm thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling

and filling the joint with sand in proper line and level as per guidlines of

IRC : SP 63-2018 etc. Complete.

Providing and fixing pre-cast concrete kerb stone of gray cement based

concrete block 30cm length,30cm height and 15cm thick of M250 grade

147 concret as per approved design and including excavation for fixing in 200.00 Rmt 374.92

proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand)

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

construction of concrete road using tremix system with 20CM thick M-

25 concrete mixing complast P 211 water reduction concrete admixture

@ 100 M.L. per bag of cement with providing adn fixing and removing of

"C" Channel having size 75 mm X 75 mm as per required level slop and

thickness of concrete road floor leveling of placed concrete with surface

vibrator finishing the surface with power floater and trowel light

148 brooming on the surface as directed with proving expansion joint size 293.00 Cum 6157.97

20X125 mm and filling the expansion joint having size 20 mm X20mm by

using colpar 200 as per manufacturer specification with making of

construction joint by cutting of joint of size 3mm X20mm by using of

concrete cutter machine including curing etc. complete

Providing and Fixing Approved Laser cut design made out of 3mm thick

149 M.S plate with Approved colour of powder coating with scaffolding and 17.00 SqMt 4878.30

Labour with all necessary fitting etc. includes.

Steel work, riveted in built up sections framed work including cutting,

hoisting, fixing in position and applying a priming coat of red lead paint.

(A) In beams and joists, channels angles Tees, flats, with connecting

150 plates or angle cleats as in main and cross beams. Hip and jack rafters, 86400.00 kg 58.89

purlins conneted to common rafters and the like.

Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished

iron J or L Hooks, Bolts and nuts 8mm diameter with bitumen and G.I.

151 limpet washer or G.I. limpet washer. filled with white lead complete 1080.00 Sq.mt. 734.19

excluding the cost of purlins, Rafters and Trusses.(1) 0.80 mm thick

Dismentaling tiled of stone floors laid in mortar including stacking of

152 serviceable materilas and disposal of unserviceable materials with all 3120.00 Sq.mt. 49.12

Providing laying and jointing in true line and level 15 mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every

153 two metre C/C or shall be concelled as directed including necessary 30.00 R mt 72.65

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 32mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 50mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing, fixing, jointing, testing and commissioning of PVC pipe with

rubber ring joint confirming to IS : 13592, and confirming to IS :

(Pipe Class III - 6 kg / sq.cm) cut to required lengths including all

necessary fittings and specials such as bends, junctions offsets, access

pieces (plain or door). Fixing at wall / ceiling level supported by G.I.

clamps, hangers etc. duly epoxy coated. Cutting, chases/holes in floors /

walls / slab. The piping should be complete with P or S trap as req. (B)

Providing, fixing, jointing, testing and commissioning of PVC pipe with

rubber ring joint confirming to IS : 13592, and confirming to IS :

(Pipe Class III - 6 kg / sq.cm) cut to required lengths including all

necessary fittings and specials such as bends, junctions offsets, access

pieces (plain or door). Fixing at wall / ceiling level supported by G.I.

clamps, hangers etc. duly epoxy coated. Cutting, chases/holes in floors /

walls / slab. The piping should be complete with P or S trap as req. (A)

Providing and fixing wash down water closet (European type, W.C. Pan)

with integral P or S trap including jointing the trap with soil pipe in

Cement Mortar 1:1 (1-Cement : 1-fine sand) with plastic seat and cover

for wash down water closer with C.P. brass hinges and rubber buffers.

(A) vitreous China Pattern :(i) in white colour

Providing and fixing Urinal or approved quality including conecting the

Urinal with waste pipe , tap etc. complete.(A) White earthenware flat

back or corner type size 430mm x 260mm x 350mm.

Providing and fixing washbasin with single hole for pillar tap with C.I. or

M.S. brackets painted white including sutting holes and making good the

162 same but excluding fittings.(A) Vitreous China:(ii) Flat Back or 20.00 Nos. 1581.77

undercounter washbasin 550 mm x v 400mm size. (i) In white colour.

Providing and fixing S S sink 600mmx450mm in Granite corner with

163 mm CP brass bib cock long body with 32 mm CP waste coupling 20.00 Nos. 2297.75

Providing and fixing screw down bib taps of following size. (A) Brass

screw down bib tap polished bright. (i) 15mm dia.

Providing and fixing pillar tap, capstan head, screw down high pressure

with screws, shanks and back nuts. (i) 15mm dia.

Providing and fixing chromium plated brass half trun flush cock of

166 approved quality including fixing in pipe line etc. complete.(i) 20mm dia. 20.00 Nos. 254.78

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

Providing and fixing 12.5 Litres high level C..I. flushing cistern with A pair

of C.I. or Mild steel brackets, womplete with fittings such as syplionic

arrangement, 15mm nominal size brass ball valve with polythene float,

167 lever G.I. China (60 cm. ) and pull union and couplings for connections 20.00 Nos. 1580.28

with inlet, outlet and overflow pipes etc. including cutting holes in walls

and making good the same

Providing and fixing heavy duty Health Fauset with hook with fitting

168 including all as per directed by engineer in charge /Project Architect. 20.00 Nos. 582.03

Providing and fixing Gun metal check or non-return fullway wheel

valve.(F) 50mm dia.

Providing and fixing Gun metal check or non-return fullway wheel

valve.(D) 32mm dia

Providing and fixing Gun metal check or non-return fullway wheel

valve.(C) 25mm dia

172 suply and fixing 110 mm PVC cowel 30.00 Nos. 505.17

173 suply and fixing 75 mm PVC cowel 20.00 Nos. 393.04

Providing PVC gully trap CI grating brick masonry chamber and water

174 tight Ci cover with frame of 300mmx300mm size inside with standerd 16.00 Nos. 1499.42

weight (B) 150mmx100mm size P or R type

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm

diameter with jali of the following nominal diameter of self cleansing

design with C.I scread down or hinged grating including the cost of

cutting and making good the walls.

Providing erecting and fixing double coated syntex equivalent PVC (ISI)

176 mark water tank of required capacity each with all necessary fittings and 20000.00 Nos. 3.95

connectionetc comp. on teraace

providing and fixing 600mmx450mm bevelled edge mirror of superior

glass mounted of 0.6 mm thick A C sheet or plywood sheet and fixed to

wooden pluge with CP brass screws and washers

Providing and fixing PTMT liquid soap container 109mm wide, 125mm

high and 112mm distance from wallof standard shape with bracket of

the same material with snap fitting of approved quality and colour

weighing not less than 105 gms.

Providing and fixing C.P. brass towel rail comlete with C.P. brass

179 brackets fixed to wooden plugs with C.P. brass scews.(B) 600mm x 10.00 Nos. 616.42

Providing, laying and jointing in true line and level 160 diametre U.P.V.C

(Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 160 mm diametre x 210 mm length x 196 mm heigh at

every 2000 mm center to

center or shall be concealed in walls as directed including necessary

fittings such as bends, shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement including cost of all materials.

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

Providing, laying and jointing in true line and level 110 diametre U.P.V.C

(Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at

every 2000 mm center to

center or shall be concealed in walls as directed including necessary

fittings such as bends, shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement including cost of all materials.

Constructing brick masonry chambrs for underground C I Inspection

Chamber and bends with bricks having crushing strength not less than

35kg/sq cm in C.M. 1:5 C I cover with frame (light duty)455x610mm

internal dimention total weight of cover with frame to be not less than

38kg RCC top slab with CC 1:2:4 mix (1,cement : 2,coarse sand: 4,graded

182 aggregate 20 mm size) foundation concrete 1:5:10 inside plaster 15mm 16.00 Nos. 3660.76

thick with C.M. 1:3 finish smooth with finishing coat of neat cement on

walls and bed concrete etc (inside dimentions 500mm x 700mm x &

450mm deep) for single pipe lines with one of two inlets.

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-

coarse sand : 4-graded stone aggregate 20mm nominal size) foundation

concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm

size) inside plastering 15mm thick with Cement Mortar 1:5 (1-Cement :

5-coarse sand) finished with a floating coat of neat cement and making

channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-

stone aggregate 20mm nominal size) finished smooth complete

including curing and festing (i) Inside size 900mm x 1200mm and 1.5M.

deep including C.I. cover with frame size 560mm diameter total weight

of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and

Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick msonry using

brick having crushing strength not less than 35Kg. / Sq.cm. in Cement

Mortar 1:5 (1- Cement: 5-Coarse sand) (2)B type depth 1.50 Metre for

150mm diameter sewer.

RCC precast frame with supply, fitting, fixing with complete as per

specification 10ton size 550/550/90mm.

RCC precast cover with supply, fitting, fixing with complete as per

specification 10ton size 550/550/90mm.

186 Drilling of bore 165mm hole by DTH rig. (a) 0 to 150 mtr. 150.00 R mt 187.98

187 Drilling of bore 165mm hole by DTH rig. (b)151 to 225 mtr. 225.00 R mt 232.74

Supplying submersible pump set suitable for bore of 150 mm dia or

more having 3 phase motor capacity not less than 10 HP with following

capacity.[B] 20 stage 210 to 160 LPM discharge at 148 to 173 mtr head

for 50 mm dia delivery pipe Cat.III

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

Supplying & erecting approved make 3 phase motor control cubical

panel ( Star - Delta) made from16 G. CRCA sheet duly painted with

epoxy powder painted inside and outside with hinged doors and locking

arrangement, consisting of suitable size of ON- OFF isolator (AC - 3/23

duty) main fuses, single phasing preventer cum water level. Guard

(Complete unit), Toggle switch to by pass Single phase preventer cum

WLG, indicating lamps for R- Y- B phases, over load relay, Automatic

189 water level controller, Ammeter & Voltmeter each with two way 1.00 Ea. 14594.50

selector switch incoming wires duly socket Crimped, Panel to be

erected on angle iron frame grouted on wall as directed. Star Delta &

main contactor, overload relay, thermal / Electronic Star delta cutoff

timer, start - stop push buttons. The isolator overload relay &

contactors of L& T, Siemens or Cuttler Hamer make only. Panel to be

erected on angle iron frame ground on wall. (b) S/D up to 10 H.P.

Supplying & erecting approved make motor control cubical panel

(Direct - on - line) made from 16 G. CRCA sheet duly epoxy powder

painted inside and outside with hinged doors and locking, arrangement

consisting of suitable size of ON- OFF isolator (AC - 3/23duty) main

fuses, single phasing preventer, indicating lamps for R- Y - B phases,

overload relay, Automatic water level controller, Ammeter, Voltmeter

each with two way selector switch incoming, wires duly socket crimped,

main contactor & overload relay, start - stop push buttons, to be

erected on angle iron frame grouted on wall as directed. The isolator,

overload relay & contactors will be of L & T, Siemens or BCH make only.

(a) DOL up to 5.0 H.P.

Providing & erecting open well horizontal mono block pump set with

cast iron body, complete for three phase submersible motor having[D]

191 For 5 HP 3 phase open well horizontal mono block pump set suitable for 2.00 Ea. 18746.61

1350 LPM to 310 LPM @ 10 to 42 Mtr head suitable for 50/65 mm dia

delivery pipe Cat.II

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat

192 flexible Submersible copper cable approved make of following Size. 258.00 R mt 295.93

(e) 3 Core x 10 Sq. mm.

Providing Water proof straight Joint in PVC insulated flat flexible copper

193 cable by using insulating material, water proofing material, & making 5.00 Ea. 189.88

the joint complete. (A) Up to 10Sq. mm

Supplying, & erecting C.I. swing, check type non-return (Reflux) Valve -

ISI marked suitable for following size (A) 50 mm dia.

Supplying & erecting Mild Steel heavy duty Flanges with rubber packing

195 and hardware materials for pipe connections suitable for (A) 50 mm (2") 1.00 Ea. 130.29

Heavy duty clamp made from 4" x 1.5" iron strip suitable for column

pipe 1.5" to 2" length. (B) 50mm(2") dia pipe

Supply & laying of 50mm HDPE Pipe 10 kg/cm2 IS- 4984 mark including

all with necessary Fittings etc.

Furniture & Interior Work

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

FULL HEIGHT PARTITIONS: Supplying and erecting 2760 mm height

partition of modular grid system consisting of CRCA Steel framework.

The horizontal section of the framework is to be constructed out of a

minimum 0.8 to 1 mm thickness and vertical members of the frame are

to be constructed with joinery of 1 mm and 1.5 mm thus making a total

thickness of 2.5 mm) thick CRCA Steel sections. The horizontal members

should be bent and hemmed to give proper strength to the skeleton.

The skeleton should be finished with a powder coating of 40-50 microns

thick finish in matt powder coated finish. The framework is to be

completed with vertical and horizontal members of a minimum 75 mm

width linked horizontally or vertically to any desired configuration

complete with spot welding at the edges, top runners, bottom skirting,

end trims, corner post, Height adjustor and necessary steel

components. The joinery of the skeleton should be possible at 900,

or 1800 as specified in the drawing with the help of heavy-duty CRCA

connectors of 140mm height which shall have the recess coming out to

hold the corner cover sections. The exposed ends of the frames are to

be finished with extruded aluminium alloy powder coated L shape or T

shape end covers. All the steel and aluminium components are to be pre-

treated in 7 tank pre-treatment plant before powder coating.The

framework should have skirting of 100 mm height. For wire

198 management, the slots for the inlet of wires should be provided. There 18.00 Sq.mt. 7777.00

Partitions also

provision to separate

with the data,ofelectrical

combinations tiles madeand voice

minimum 9–12 mm thick pre-laminated MDF board with balancing

laminate of approved size and shade on both the side of framework or

fabric as per the choice of the architect or client wrapped on minimum

– 12 mm thick MDF or minimum 0.8 to 1 mm CRCA Steel Sheet with

epoxy powder coated finish as per the approved shade, the option of

providing perforated and embossed tiles also should be available at the

discretion of Architect. All the above tiles should be fitted with snap on

polyacetal clips on the top and aluminium clips on the bottom. This

should help easy removal of tiles up to 1135mm in height. From

1136mm to 2400 mm or wherever specified, the partitions are to be

completed with double skin 4 mm thickness compulsorily toughened

glass for safety with all the profiles and covers made up of 0.8 mm thick

CRCA steel or aluminium extruded alloy sections duly finished in powder

coated finish in the desired colour, to hide the slots of the skeleton. The

combination of panels should be available and also it should be

interchangeable with each other. Please refer to Drawing Nos.

VCSPL/JPB/FUR/001/2223, VCSPL/JPB/FUR/002/2223 and

VCSPL/JPB/FUR/003/2223.

LOW HEIGHT PARTITIONS FOR WORKSTATIONS & CUBICLES : Supplying

and erecting 1200 mm height partition of modular grid system

consisting of CRCA Steel framework. The horizontal section of the

framework is to be constructed out of a minimum 0.8 to 1 mm thickness

and vertical members of the frame are to be constructed with joinery of

1 mm and 1.5 mm thus making a total thickness of 2.5 mm) thick CRCA

Steel sections. The horizontal members should be bent and hemmed to

give proper strength to the skeleton. The skeleton should be finished

with a powder coating of 40-50 microns thick finish in matt powder

coated finish.The framework is to be completed with vertical and

horizontal members of a minimum 75 mm width linked horizontally or

vertically to any desired configuration complete with spot welding at

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

The framework should have skirting of 100 mm height. For wire

management, the slots for the inlet of wires should be provided. There

199 should be also a provision to separate the data, electrical and voice 9.00 Nos. 7777.00

cable as per the international standard. The provision of electrical

provision should be provided at three levels, viz. skirting/ above table

level/ below table level. This should consist of power beams and switch

plates made out of CRCA Steel. Sizes available should be 600mm,

750mm, 900mm, 1050mm and 1200mm. The vertical division of the

partitions shall be module-wise, wherein each module shall be of a

height of 525mm. The full height partitions shall be made of such equal

modules. In case of full height, if the odd height remains after adding

equal modules of 550 mm height, the top module only will be

customized as per the site requirement. Switch Board raceways should

be supplied with factory-made cut-outs corresponding to standard

make or equivalent switches as per the site-specific

requirements.Partitions to be completed with combinations of tiles

SOLID DOOR : Providing and fixing at site, solid doors attached to the

partitions. The doors should consist of two parts viz. main door and

door frames. The door frames should be designed to give a rigid support

to the solid doors and to give necessary features required by a door

such as hinges / pivots etc. for easy swing of the door. The door frames

should be made up of highly tolerance aluminium extrusions to fit in

specific width and height as per site specific requirements. The door

frames should have the option of opening the door on left hand side or

right hand side. The door frames should be installed by fastening it with

side partitions or to the wall laterally and on top may be another

module of existing type of partition or ceiling rail as per specifications

mentioned in full height partitions specifications which is connected to

the roofing. The frames should be such which can be installed or

relocated as and when required as easily as regular frames. The door

frames should be supplied with pre-fitted accessories like hinges and

connectors etc.

The door frames should be made up of highly tolerance aluminium

200 extrusions to fit in specific width and height as per site specific 2.00 Nos. 22220.00

requirements. The door frames should have the option of opening the

door on left hand side or right hand side. The door frames should be

installed by fastening it with side partitions or to the wall laterally and

on top may be another module of existing type of partition or ceiling rail

as per specifications mentioned in full height partitions specifications

which is connected to the roofing. The frames should be such which can

be installed or relocated as and when required as easily as regular

frames. The door frames should be supplied with pre-fitted accessories

like hinges and connectors etc.The doors should be supplied with pre-

fitted necessary hardware for smooth swinging action of the door. The

construction of the doors should be solid and rigid. The doors should

have overall thickness of 40mm (+/- 2mm). The doors should be made

up of paper honeycomb and particle board constructions. The paper

honeycomb should be sandwiched in between two 9mm pre-laminated

particle boards. The edge of the doors should be surrounded with 2mm

thick PVC edge bidding. The doors should be supplied with cylindrical

locks. The operation of the doors should be with the help of door

closures of approved make. Complete with all tools and tackles as per

Chairs for President & DDO

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

Chairs for President & DDO : Supply & positioning of the high back chair

with headrest in pure leather finished pressure die casted chrome

finished fixed armrest polished aluminium with poly propylene arm

tops. Synchronous tilt mechanism with 4 positions multi-locking system,

Pneumatic seat height adjustment of 10 cm. Adjustable back support

feature with drop lift mechanism in the range of 7 cm., 5 pronged die-

cast aluminium pedestal with pp castors. The pedestal should be

pressure die cast polished Aluminium, etc complete as per the

manufacturer's specification, detailed technical specifications, drawings

and as per the EIC/ Architects. Approved make are Godrej HALO PCH

9200 / Featherlite-Crown HB with headrest/ Evok- Legacy HB with

Visitors' Chairs for President & DDO

Supply & positioning of the high back chair with headrest in pure leather

finished pressure die casted chrome finished fixed armrest polished

aluminium with poly propylene arm tops. Synchronous tilt mechanism

with 4 positions multi-locking system, Pneumatic seat height adjustment

of 10 cm. Adjustable back support feature with drop lift mechanism in

202 the range of 7 cm., 5 pronged die-cast aluminium pedestal with pp 15.00 Nos. 30330.30

castors. The pedestal should be pressure die cast polished Aluminium,

etc complete as per the manufacturer's specification, detailed technical

specifications, drawings and as per the EIC/ Architects. Approved make

are Godrej HALO / Featherlite-Crown MB / Evok- Legacy MB

Chairs for Category C-2, C-3 & C-4 Executives & Conference Room

Chairs for Category C-2, C-3 & C-4 Executives & Conference Room

:Supply & positioning of medium back chair, the seat is made up of

plywood and moulded polyurethane foam upholstered with fabric. The

backrest assembly is of injection moulded plastic with mesh fabric and a

height-adjustable lumbar support pad. The armrest has 3-way button-

operated height adjustment, front & back adjustment and swivel

adjustment. The arm top is made of soft moulded PU with a plastic

203 insert. The chair should have a knee tilt synchro mechanism with 5.00 Nos. 9301.09

features i.e. 360 degree revolving, three position locking, tilt tension

adjustment and antishock mechanism. The pneumatic height

adjustment is class 3 category and has an adjustment of 12.0 cm. The

pedestal is made of moulded plastic GF Nylon and fitted with 5 nos. twin

wheel castors etc, complete as per manufacturers specification, detailed

technical specifications, drawings and as per the EIC/ Architect.

Approved make are Godrej-Crest MB / Featherlite-Astro MB/ Evok - TXN-

Visitors' Chairs for all Category Executives

Visitors' Chairs for all Category Executives : Supply & positioning of the

mid-back chair with headrest, the seat is made up of plywood and

moulded polyurethane foam upholstered with fabric Seat cover is

injection moulded and upholstered with foam laminated net fabric. The

back is moulded in nylon and has upholstered with black net fabric The

one-piece armrests are made of black polypropylene. The chair should

204 have features i.e. 360-degree revolving, upright position locking, and tilt 10.00 Nos. 6572.07

tension adjustment. The pedestal is injection moulded in black glass-

filled Nylon with ABS cladding and fitted with 5 nos. twin wheel castors.

The 50-diameter twin wheel castors are injection moulded in glass-filled

black Nylon etc, complete as per the manufacturer's specification,

detailed technical specifications, drawings and as the EIC/ Architect.

Approved make are Godrej- Smile/ Featherlite-D-205S ASL LB/ Evok -

Panelling on wall/column in laminate finish.

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

Panelling on wall/column in laminate finish. : Providing & fixing

panelling on wall/colomn framing shall be consist of 25x50 mm c.p teak

205 wood at 600 mm c/c(approx). both ways horizontal & vertical on the 177.60 Sq.mt. 3811.74

wall. Framing shall be covered by 12mm & 6mm comm.ply with 1.0 mm

th. Two different colour laminate with grooves. whereever required as

per instruction given by Architect

Do as above, but 4 mm th. Veneer to be provided instead of laminate.

206 Finished with melamine polish. Basic rate of veneer Rs. 1000/- Smt. 24.50 Sq.mt. 7583.08

Acoustic Panelling - Providing and fixing wall acoustical panelling Fixing

with Sound Strut screw fixed horizontal/vertical to the wall at every

600mm c/c. The metal cleat can be fixed on the top edges of Sound

Strut Ceiling Section 55 fixed directly by stamping to the CS55 and

Intermediate Channel-91 which is screw fixed directly to the wall where

ever required and using Knauf make glass wool between framing and

panel with technical specification of 32kg density and 50MM thick and

207 above CS55 fixing cement sheet of 8MM thick and fixing iSonic make 177.60 Sq.mt. 6572.07

polyester fibre acoustic wall panelling with the specification of 9MM

thick having a density of 237 kg/m3 with NRC value of 0.80 surface matt

finish which is fixed with solution SR505 as required. The panel should

have a euro class B ASTM E84-13 fire rating. The colour shade of the

Panel as approved by the Architect. Including all accessories, materials

& labour complete as directed by Architect / EIC.

208 Rockwool : Rockwool insulation of approved makes for sound insulation 24.50 Sq.mt. 506.01

as per company specification to be fixed with partition/wall panelling.

Providing and fixing the raised access floor system of comprising of

Providing and fixing the raised access floor system of comprising of followingLaminated panel : Access

floor panel of size 600 x 600 mm shall be all steel welded construction, with an enclosed bottom pan

of 60 hemispherical and top plain sheet which are fuse welded at 144 locations to form a panel of an

overall depth of 32 mm. The panel after cleaning, degreasing, phosphatling by several tank processes

is coated with 40 - 60 micron epoxy coat and is heated to achieve maximum adhesion to be panel

surface and corrosion resistanc. The inner empty core of the panel is injected with a light weight fire

retardant, non combustible cementitious compound at high pressure to fill in all the crevices of the

panel and ensures support of not less than 90% of the top surface area of the panel. The panel is then

laminated with 1.5 mm thick fire retardant floor grade antistatic laminate on a semi automated

lamination line to ensure maximum bonding to the steel surface. The edges of the laminated are

protected with black conductive PVC edge trim 7 mm wide on all sides. This edge trim is locked and

sealed in place to avoid detachment.Sub structure - pedestal assembly : Sub structure installed to

support the panel shall be suitable to achieve a maximum finished floor height from 65mm to 600mm

from the exisiting fllor level. Pedestal design shall confirm speedy assembly and removal for relocation

and maintenance. The assembly shall provide easy adjustment to leveling and accurately align panels

for a maximum+-25mm in the vertical direction. Pedestals shall support an axial load without

permanent deflection and an ultimate load as laid in system performance requirement .The pedestal

head assemble shall consist of a 75x75mmx3mm embossed head mechanically riveted to a 85mm long

19mm mm dia rolled formed stud and 1 check nuts for level adjustment with a flange of sides for anti

rotational feature movement. The pedestal head shall consist of an anti-vibrational PVC cap, for panel

and stringer location.The pedestal base assembly shall consist of 22mm OD pipe of thickness 1.5mm

mechanivcally locked on a press for perpendicularity and then welded to a base plate of

100x100x1.5mm thick with stiffening folds.The sub structure assemble shall be suitable anchored to

the floor with suitable adhesive or fastener as recommended by the manufacturere. All stell

compenents shall be zinc electro plated.STRINGERS : The stringers shall be hot dipped galavanized

steel cold rolled construction specially designed with ribs embossed on 3 sides for strength,lateral

stability, and for enhanced rolling loads perfomane and to support the panels on all four sides for

alignment. The stringer to have a counter sunk holes at both ends to accommodate bolting of M6

209 screws to the pedestal head assembly. 25.00 Sq.mt. 5055.05

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

209 Item Description

Quantity Sq.mt.

Rate With 1% LC

The above should confirm the following structural performance and fire rating.

Concentrated Loads : 363 Kgs (800lbf) with a top-surface deflection under load and a

permananet set not to exceed,respectively,2.54 & 0.25 mm (0.1. & 0.010 inch ) according to

CISCA A/F section I “ Concertrated Loads.”Ultimate Concentrated Load : 963 Kgs (2000 lbf)

without failing according to CISCA A/F,SECTION II “ Ultimate Loading “ Rolling Loads :

Kgs (400 lbf) of the following magnitude, with a combination of local and overall

deformation not to exceed 1.02mm(0.040 inch) according to CISCA A/F, Section III “ Rolling

Loads” CISCA AF Rolling Load : 10000 Passes Sringer Load Testing : 102 Kgs (225 lbf) at the

centre of the span with a permanent set not to exceed 0.25 mm (0.010 inch) as determined

by CISCA A/F,Section IV Stringer Load Testin”. Pedestal Axial Load Test : 27 KN axial Load

per pedestal, according to CISCA A/F,Section V”Pedestal Axial Load Test” Pedestal Over

Turning Moment test : 113 N x meters, according to CISCA A/F Section VI,”Pedestal

Overturning Moment Test”. Uniformly Distributed Load9UDL): 1080 kg/m with a maximum

permissible deflection of not more than 1.52 mm as per definition of “Uniform load” of

CISCA tested over an area of 300x300mm square for 100 Kgs load. Soft body impact test on

the system shall be with a load of 40 kgs. Dropped from a height of 1000mm and shall

comply with all the performance as specified in the test method(T12.03) of MOB PF2 PS

standards. Hard body impact test on the system shall be with 4.5 kgs. Dropped from a

height of 600mm and shall comply with all the performance as specified in the test method

(T13.03) of MOB PF2 PS standards. Fire Rating : The Panels shall confirm to Class to Class

fire Ratings tested as per BS 476 Part 6 (Fire Propagation) & 7 (Surface spread of flame) as

also ASTM E84 1998 (Flammability) and ASTM E136 (Combustibility) . Electrical Resistivity :

As per ASTM F-150/NFPA 99 /ANSI S7.1 but modified for surface to ground. To place one

electrode on the Access floor Panel surface and to attach the other electrode on the

pedestal. Resistance to be tested at 500 volts. Conductive range : 2.5x10- 1x10 Ohms

(surface to ground) Static dissipative range : 1x10 – 1x10 Ohms (surface to ground). Anti

static range : 1x10 – 2x10 Ohms (surface to surface)

FULLY TOUGHENED GLASS DOOR.

FULLY TOUGHENED GLASS DOOR. :Supply & Fixing of fully glazed door

fitted to the modular partition. The size of each door shall not be less

than 900 x 2300 mm ht (approx). The same should be attuned to the

modular partition.The doors should be supplied with pre-fitted

necessary hardware of Ozone / Enox / Dorma make for smooth

swinging action. The door should be of 12mm thick toughened glass and

to be supplied with a top patch, bottom patch, patch lock, SS Handle of

210 450 mm height, Floor spring, Pivot etc, complete with all necessary 4.00 Nos. 27196.27

framing above false ceiling, without any extra cost.Frame to be provided

within the modular partitioning for proper function, made of extruded

power coated aluminium section and to be properly anchored & shall

look part of the modular partition system & making the same matching

looks part of the modular framework. The entire work shall be carried

out as per the detailed technical specifications, and drawings and as per

the instructions of the site Engineer.

Supply & fixing of 100% Nylon Multilevel textured loop pile CRI Green

label plus solution dyed standard loop pile FRS carpet tiles in size

mm x 500 mm x 3 mm to 5 mm thick. The carpet tile should be Recycled

Vinyl Reinforced by glass fibre, the carpet tile should meet VOC (Green

label plus certification), the carpet should be treated with Anti Microbial

211 treatment, carpet should be UV treated & heat stabilized for heavy-duty 25.00 Sq.mt. 3589.54

performance. The carpet is to be fixed with a water-based adhesive

having Green label PLUS certification & as per EIC / Architect approval.

The basic rate is Rs.2500 /- sqm. excluding GST. Approved makes are

Mohawk / Shaw / Miliken.

Supplying of steel cupboard with glass shutters. The cupboard shall be

made up of 0.8 mm CRCA steel with powder coated finish. The size of

the cupboard shall be 900 mm x 400 mm W x 1980 mm H. The powder

coating should be done with the seven-tank process. The glass shutter

of the cupboard shall be having a frame of 75 mm around and in

between there should be 5 mm transparent glass to be fixed. Complete

as per the instructions of EIC.

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

SIGNAGE WORK :- Providing & Fixing stainless steel signage’s plate of

sizes in 1.2mm thick (ASI Grade-304) Jindal or equivalent, the letter

213 Engraving and stove enameled paint in required color with rawl plug & 1500.00 Sq.mt. 6.06

screws as per direction of Engineer-in-charge.

Providing & Fixing Router Cutter LED Tube light Board in box shape with

3mm thick white Aluminium Composite Pannel (A C P) and BACKING

with Blue Acrylic LED letters with 3 mm) thick Acrylic sheet (ASTARI, UB

OR EQUIVALENT MAKE LED module (PHILIPS, SAMSUNG CORIAN,

HAVELLS LUKER TRILUX or equivalent make), Power supply of reputated

approved make including carraige at site fabrication etc as per direction

of Engineer-in-charge. (length and widht of board shall be measured for

Providing & fixing stainless steel English & Hindi (Capital) letters in

standard pattern hollow type made with 1 mm thick stainless steel (ASI

grade-304) Jindal or equivalent. The depth of the letter shall not be less

215 than 30mm and the rate includes buffing and fixing the wall beam 1000.00 151.50

surface at any height with necessary nuts and bolts/faster wherever is

require complete as per direction of the Engineer-in-charge.

TABLE TOP TOUGHENED GLASS.

TABLE TOP TOUGHENED GLASS. : Providing and Fixing of 10 mm thick

toughened glass with diamond edge polish for the table tops. The work

216 should be carried out in close co-ordination with the modular furniture 25.00 Sqm 3741.04

supplier and the glass should have the slot for the cable manager at the

exact position of the table tops. Complete as per design and direction of

EIC / Architect. The glass should be of approved make.

WOODEN FLOORING

WOODEN FLOORING : Supply & laying of 8 mm thick laminated wooden

flooring, classification of use 31/23 with a surface abrasion resistance of

class AC4. 0.2 mm thick wear layer on top of a high-density fibre

substrate. Plank size 1215 mm x195 to 197mm having locking

arrangement with an under laying made of natural colour foam, with

accessories like end profile, transition profile, reducer, stair nosing, the

item including supplying and fixing of skirting profile & door profile to

the flooring. etc, complete as per manufacturers specification, detailed

technical specifications, drawings and as per the EIC/ Architect.

Approved makes are Surya Click / Egger / Armstrong or equivalent. The

basic rate should not be less than Rs. 950/ SMT. excluding GST.

WOODEN FINISH METAL CEILING BAFFLE 50 MM X 100 MM

WOODEN FINISH METAL CEILING BAFFLE 50 MM X 100 MM :Providing &

Fixing of Baffle ceiling made out of GI section. The Baffle panel shall be

in size 50 mm x 100 mm in PU coated finish (60 microns) of wood grain

finish. The Baffle panel shall be suspended using C Channel 20 x 30 x

mm. The C-Channel shall be suspended at every 1500 mm, using 6 mm

threaded rod from the structural soffit at every 1200 mm intervals.

218 Panels shall be connected with C-Carriers by sliding to the built in 120.00 Sq.mt. 5561.06

Groove provided. The Baffle panels shall be suspended from the C-

Channel at the required distance 100 mm as per the design. Different

lengths of Baffle panels shall be connected using Baffle jointers. At the

end of panels the edges to be covered with end caps of the same color

of Baffle Panels. Make Armstrong / Luxalon / iSonic

PLYWOOD CEILING WITH VENEER FINISH

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

PLYWOOD CEILING WITH VENEER FINISH :Providing and Fixing of Ceiling

with 12 mm thick commercial IS:303 plywood and veneer finish. The

219 ceiling shall be mounted on 50 x 38 x 1.5 mm thick aluminium hollow 120.00 Sq.mt. 6572.07

pipe sections and the plywood shall be fixed with metal screw with the

pipes. The skin on the plywood shall be 4 mm thick veneer finish with

melamine polish.

GRID CEILING :Providing and fixing false ceilings at all heights with integral densified

calcium silicate reinforced with fibre and natural filler false ceiling tiles With 15 mm

thick integral densified microlook edge light weight calcium silicate false ceiling tiles

of Size 595x595 mm of approved texture, design and patterns having NRC (Noise

Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of

85% (minimum). Non-combustible as per BS:476 (part-4), fire performance as per

BS:476 (parts 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m

K as per ASTM 518:1991, in true horizontal level suspended on interlocking metal

powder-coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on

Silhouette profile, rotary stitched double webbed white with 6mm reveal profile

220 (white/black), comprising of main-T runners of size 15x42mm of length 3000 mm, 128.00 Sq.mt. 2188.67

cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross-T of

size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm,

suspended from the ceiling using galvanised mild steel items (galvanizing @

grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia

fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size

85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length

3000 mm to be fixed on periphery wall/partition with the help of plastic rawl plugs

at 450 mm centre to centre and 40mm long drywall S.S screws. The work shall be

carried out as per the specifications, drawings and as per directions of the Engineer-

ROLLER BLIND : Providing And Fixing In Windows Roller Blinds Of

Fabric, Texture, Shade And Design (Vista/Mac.Neon Or Approved

Equivalent) Company Made Anodised Rails And Complete Arrangement

For Operating Blinds (Rotating and Gathering The Blinds And All Other

Accessories) Etc Complete As Per Direction Of Engineer-In-Charge. (

Area Covered By Length Of The Rails And Height Of The Strips Including

Rails Shall Be Measured For Payment.)

ROMAN CURTAIN CHIK

ROMAN CURTAIN CHIK :Supplying and installing customized roman type

imported bamboo chick curtain/blinds stitched from approved fabric in

10" folds of approved shade, design, colour, approved make and height

with ball chain operating system as per manufacturer's specifications.

The rates shall be inclusive of installation, fabric stitching cost, fabric,

labor, wastage, operating system all tools tackles, scaffoldings,

hardware at all floors, necessary edge binding with approved fabric and

thread of colour similar to the colour of the blinds and controller system

having chain pulley arrangement, etc complete as per the requirement

of Engineer-in-charge. Actual elevation area of curtains in closed

condition shall be measured and paid. Rate shall be applicable for all

heights and for all floors. The contractor shall get the sample approved

by the Engineer-in-charge/Architect before execution.

POP PUNNING ON WALLS

POP PUNNING ON WALLS : P.O.P Punning on wall-Providing and

applying POP Punning on walls and columns (average 12mm to 25mm

223 the). The rate shall include scrapping, levelling and preparing the 49.00 Sq.mt. 383.80

surface. The rate shall be inclusive of all types of grooves above the

skirting, around the window and door frames, completed as directed by

Project manager / Architect.

ARTIFICIAL PLANTATION

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

ARTIFICIAL PLANTATION : Providing and Supplying Plantation with Fiber

glass pots/ SS pots (Plantation Basic Cost Rs. 4500/-) completed as

directed by Project manager / Architect.

Providing and Supplying Plantation with Fiber glass pots / SS pots

225 (Plantation Basic Cost Rs 3000/-) completed as directed by Project 25.00 Nos. 4044.04

manager / Architect.

Providing and Supplying Plantation with Fiber glass pots / SS pots

226 (Planation Basic Cost Rs. 2000/-) completed as directed by Project 25.00 Nos. 2730.03

manager / Architect

SINGLE SEATED SOFA - PRESIDENT & DDO CHAMBER

Single Seater Sofa - Size 790mm(L) x 760mm-780mm(W) x 760mm-

SOFA SETS (SINGLE SEATED SOFA - PRESIDENT & DDO CHAMBER) :Single

seater sofa chair of size 760-790mm (L) x 760-780mm (W) x 760-790mm

(H) (approx.) as per indicative image. The wooden structure of the sofa

227 is to be fabricated using a 75mm x 40mm section of good quality 2.00 Nos. 24931.85

hardwood duly seasoned and applying anti-termite paint of approved

brand and manufacture to ensure the stability of the frame. On the

wooden base frame of the sofa to be provided with M.S. helical spring,

sides & back with jute strips (Newar) 75mm wide, with polyfill covered

with jute and finished with thick markin cloth before doing final

upholstery as per shape, slope and style etc.

DOUBLE SEATED SOFA - PRESIDENT & DDO CHAMBER

Two Seater Sofa -Size 1250mm-1300mm(L) x 750mm(W) x 750mm-

DOUBLE SEATED SOFA - PRESIDENT & DDO CHAMBER :Two seater sofa

chair of size 1250mm-1300mm(L) x 750mm(W) x 750mm-790mm(H)

(approx.) as per indicative image. Wooden structure of sofa to be

fabricated using 75mm x 40mm section of good quality hardwood duly

seasoned and applying anti-termite paint of approved brand and

manufacture to ensure stability of the frame. On wooden base frame of

the sofa to be provided with M.S. helical spring, sides & back with jute

strips (Newar) 75mm wide, with polyfill covered with jute and finished

with thick markin cloth before doing final upholstery as per shape, slope

THREE SEATED SOFA - PRESIDENT & DDO CHAMBER

Three Seater Sofa Size 1800mm-1900mm (L) x 760mm - 790mm (W) x

THREE SEATED SOFA - PRESIDENT & DDO CHAMBER :Three seater sofa

chair of size 1800mm-1900mm(L) x 760mm-790mm(W) x 760mm-

790mm(H) (approx.) as per indicative image. The wooden structure of

the sofa is to be fabricated using a 75mm x 40mm section of good

quality hardwood duly seasoned and applying anti-termite paint of

approved brand and manufacture to ensure the stability of the frame.

On the wooden base frame of the sofa to be provided with M.S. helical

spring, sides & back with jute strips (Newar) 75mm wide, with polyfill

covered with jute and finished with thick markin cloth before doing final

upholstery as per shape, slope and style etc.

LOUNGE SEATING SOFA

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

LOUNGE SEATING SOFA : 3 seat Visitor Chair without arms and without

Cushion rectangular with overall dimensions shall be Seat Height - 400 -

420mm, Width-1820 - 1850mm and Depth-650 - 670mm. Leg shall be

made of chrome plated cold rolled steel minimum 1.2 ± 0.13mm

thickness. Seat and Back shall be 1.6+/-0.13 mm thk powder-coated

perforated shell made from cold rolled M.S. sheet. Cross beam shall be

230 made up of powder coated rectangular MSERW tubular section having 10.00 Nos. 15671.16

thickness not less than 2 ± 0.16 mm. Seat & back shall have cushion seat

uphosltered with leatherite for comfort. The Side Bar shall be made of

Chrome plated solid steel of thicknes not less than 12 ± 0.3 mm. The

Shell shall be assembled on the Cross Beam with help of 8 No M8 Bolts

per Seat. Product should be BIFMA gold rated SCS global certified for

inhouse air quality.

Providing & fixing in true line level 595mm x 1195mm x 20mm "PURE"

make tegular edge glass fiber ceiling acoustical panel in matt white color

with Match T grid system. The panel shall be anti sag and are to be

made from high performance glass fiber slab of minimum 96kg/m3

density and NRC value of 0.90 which has textured or painted surface

glass fiber tissue, back side plain glass fire tissue and all sharp edges. The

T grid system fix in a suspended grid of size 600mm X 1200mm made

from hot dipped GI Steel sections, rotary stitched, main tee of size

15/24 mm X 38mm X 3000mm suspended at every 1200mm c/c along

with length of ceiling with 16G pre-straightened GI wire with necessary

231 accessories & intermediate cross tees of size 15/24mm X 32mm X 624.00 Sqm 2944.15

600mm/1200mm as required shall be inserted in to slots between the

main tees at 600mm centers in direction vertical to the main tees,

where in the main tees are resting on the periphery on wall angles of

size 24mm X 24mm X 3000mm including providing necessary openings

for light fixtures, diffusers etc. are to be made as per lay out & including

all accessories, material & labor complete as directed by Architect /

Engineer – in – charge. Approved make: PURE or Eqivalent

Providing & fixing in true line level “PURE” make 1200mm x 2400mm x25mm thick

Wooden Slat PET acoustical panel. The panel to be made from 2000g/m2 density

100% polyester staple fiber, resistance to shrink, stretch, chemicals, mildew/fungus,

abrasion, should be comply with fire classification B-S1, d0 as per EN - 13501, NRC

Value up to 0.90 as per ARAI. The panel to fix firmly by on site cuttingas per provided

design and shape with the help of synthetic rubber adhesive on 1220mm x 1830mm

x 12.5mm thick tapered edge gypsum based acoustical panel having square

perforation of 5mm x 5mm at 19.3mm with 25mm drywall screw fixed at 230mm

centers to surface ribbed GI cold rolled section channel of 120 micron zinc coating

0.5mm thick having knurled edge of 51.5mm and two flanges of 26mm each with

lips of 10.5mm placed at 610mm center, surface ribbed GI cold rolled perimeter

channel of 120 micron zinc coating 0.5mm thick having two flanges of 20mm &

232 30mm and web of 26mm fixed to the floor and surface ribbed GI cold rolled 80.00 Sqm 5555.00

Intermediated channel 120 micron zinc coating 0.5mm thick. The cavity to be filled

with fiber glass insulation material to be packed in 50GSM non woven fabric. It shall

be lightweight, non-corrosive, chemically inert, odorless, does not encourage

growth of fungi & vermin, non combustible tested as per BS 476 part 4 and ISO

IS 3808 & IMO (FTP) having thermal resistance R 1.5 with 24KG/M3 density and

thickness of 50 mm complying high thermal resistance for effective thermal

insulation. High NRC & STC values for effective acoustic insulation. It should

minimize energy loss, cooling load and operating cost for air conditioned building.

Finally square and tapered edges of the boards are to be jointed and finished so as

to have a flush look which includes filling and finishing with Jointing compound. All

combination to be fixed firmly as per manufacturer’s standard and provided lay out,

including all accessories, material & labor complete as directed by Architect /

Engineer – in – charge. Approved make: PURE or Eqivalent

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

Providing & fixing in true line level “PURE” make 1200mm x 2400mm x10mm thick

CNC Grooved PET acoustical panel. The panel to be made from 2000g/m2 density

100% polyester staple fiber, resistance to shrink, stretch, chemicals, mildew/fungus,

abrasion, should be comply with fire classification B-S1, d0 as per EN - 13501, NRC

Value up to 0.90 as per ARAI. The panel to fix firmly by CNC Grroved 55 degree V

shaped module as per provided design and shape with the help of synthetic rubber

adhesive on 1220mm x 1830mm x 12.5mm thick tapered edge gypsum based

acoustical panel having square perforation of 5mm x 5mm at 19.3mm with 25mm

drywall screw fixed at 230mm centers to surface ribbed GI cold rolled section

channel of 120 micron zinc coating 0.5mm thick having knurled edge of 51.5mm and

two flanges of 26mm each with lips of 10.5mm placed at 610mm center, surface

ribbed GI cold rolled perimeter channel of 120 micron zinc coating 0.5mm thick

233 having two flanges of 20mm & 30mm and web of 26mm fixed to the floor and 920.00 Sqm 4999.50

surface ribbed GI cold rolled Intermediated channel 120 micron zinc coating 0.5mm

thick. The cavity to be filled with fiber glass insulation material to be packed in

50GSM non woven fabric. It shall be lightweight, non-corrosive, chemically inert,

odorless, does not encourage growth of fungi & vermin, non combustible tested as

per BS 476 part 4 and ISO 1182, IS 3808 & IMO (FTP) having thermal resistance R

with 24KG/M3 density and thickness of 50 mm complying high thermal resistance

for effective thermal insulation. High NRC & STC values for effective acoustic

insulation. It should minimize energy loss, cooling load and operating cost for air

conditioned building. Finally square and tapered edges of the boards are to be

jointed and finished so as to have a flush look which includes filling and finishing

with Jointing compound. All combination to be fixed firmly as per manufacturer’s

standard and provided lay out, including all accessories, material & labor complete

as directed by Architect / Engineer – in – charge. Approved make: PURE or Eqivalent

Providing & fixing in true line level 8mm thick 100% nylon, machine

tufted, action backed, chromo jet printed woven poly propylene cut pile

carpet, total pile weight should not less than of 800 grams per sq meter.

It should compliance with Fire Retardant class as per AATCC. The carpet

should be custom designer. design will be provided by Architect /

Engineer-in-charge. The sample may be approved by the Engineer-in-

charge before start of the work. Installation should be as per

manufacturer's standard with synthetic rubber adhesive and 8mm

armored PU underlay including all accessories, material & labor

complete as directed by Architect / Engineer – in – charge. Approved

make: PURE or Eqivalent

Auditorium Stage Curtain of central opening- Providing and fixing

Auditorium Curtain (double layered curtain) with Manual Cord Operated

Split Channel with central opening. The rates shall be inclusive of

installation, material cost, labor, wastage, operating system all tools

tackles, scaffoldings, hardware at all floors, all levels and heights,

necessary edge binding with approved fabric and thread of colour

235 similar to the colour of the blinds controller system having chain pulley 80.00 Sqm 5555.00

arrangement with chain of required length and compatible locking

arrangement. Minimum 2 ties and 2 clamps shall be provided per 1 m

length of the curtain and maximum length of curtain shall not exceed

1.50m. Same rate shall be applicable for all heights and for all floors.

Both layered curtain shall be measured fro payment

Auditorium chair Providing and fixing in position Chair's for auditorium

made in mild steel powder coated frame for gang arrangemen. Seat to

be of foldable mechanism. Seat shall be fixed on floor with required size

of anchors. The rates to be inclusive of transportation, loading,

unloading, installation at site with necessary hardware at all floors and

levels etc. complete as approved by Architect/EIC. Contractor to get

loose and installed sample approved by Architect / EIC before mass

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

Supplying, installation, testing and commissioning of Electric driven

Main Fire Pump suitable for automatic operation and consisting of

following, complete in all respects, as required : (a) Horizontal type,

multistage, centrifugal, split casing pump of cast iron body & bronze

impeller with stainless steel shaft, mechanical seal conforming to IS

1520. (b) Suitable HP Squirrel cage induction motor, TEFC,synchronous

speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC

supply with IP 55 protection for enclosure, horizontal foot mounted

type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated

Common base plate, coupling, coupling guard, foundation bolts etc. as

required. (d) Suitable cement concrete foundation duly plastered with

antivibration pads 2280 lpm at 45 m Head

Supplying, installation, testing and commissioning of diesel engine

driven main fire pump suitable for automatic operation and consisting

of following, complete in all respects, as required : (Diesel Driven

Pump) Horizontal type, multistage, centrifugal pump of cast of iron

body and bronze impeller with stainless steel shaft, mechanical seal

conforming to IS 1520. - Suitable HP, 1500 RPM water cooled with

radiator, diesel engine conforming to relevant IS standard complete

with auto starting mechanism, 12 /24 volts electric starting equipment,

diesel tank, exhaust pipe extended upto 10 m outside pump house duly

238 insulated with 50 mm thick glass wool with 1.0 mm thick aluminium 1.00 Nos. 506545.30

sheet cladding, residential silencer, instruments and protection as per

standard specification, stop solenoid for auto stop in the event of fault

with audio indications, painted with post office red colour etc. as

required. - M.S fabricated, common base plate, coupling, coupling

guard, foundation bolts etc. as required. Suitable cement concrete

foundation duly plastered and with anti vibration pads. 2280 lpm at

Supplying, installation, testing and commissioning of electric driven

pressurisation pump suitable for autoatic operation and consisting of

following, complete in all respects, as required : (Jockey Pump)

Horizontal type, multistage, centrifugal pump of cast iron body and

bronze impeller with stainless steel shaft, mechanical seal conforming to

IS : 1520. Suitable HP squirell cage induction motor TEFC type suitable

for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of

protection for enclosure, horizontal foot mounted type with Class-'F'

insulation, conforming to IS : 325. M.S.fabricated Common base plate,

coupling, coupling guard, foundation bolts etc. as required. Suitable

cement concrete foundation duly plastered and with anti vibration pads.

180 lpm at 45 m Head

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

Fabrication, supply, Insallation testing & commissioning of Electrical

control panel of cubical construction, floor mounted type, fabricated

out of 2mm thick CRCA sheet, compartmentalised with hinged lockable

doors, dust and vermin proof, powder coated of approved shade after

tank treatment process, cable alley, interconnection with suitable size

copper conductor cable/solid copper strip, having switchgears and

accessories, mountings and internal wiring, earth terminals, numbering

etc. complete in all respect, suitable for main fire pump, pressurisation

pump & diesel pump set complete as per CPWD specification with

following in coming and Outgoings, suitable for operation on 415V,

phase, 50Hz Ac Supply with enclosure protection class IP 42 as required

: Incomings 400A, 50kA 4 Pole MCCB, Ics=100% Icu Rating Digital

Voltmeter 0-500V with selector switch Ammeter (0-400 A) with selector

swtich & CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip

indicating lamps Set of Copper Bus Bar 1000Amps Outgoings ( Note : All

outgoing feeders for pumps should have digital Ammeter with selector

switches, and LED type ON, OFF, trip indicating lamps) Main Fire Pump

250 Amp, 50kA TPN MCCB, Ics=100% Icu, with fully automatic

Star/Delta starter suitable for 25 hp pump with overload protection,

current sensing type single phase preventor complete with all

acceessories and internal wiring required for automatic operation,

selector switch for local/remote, auto/manual/OFF operation. - 1 sets

Providing 125testing

laying, Amp, 50kA TPN MCCB, Ics=100%

& commissioning Icu,

of 'C' class withduty

Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges,

tapers, nuts bolts, gaskets etc. in ground including welding, excavation &

241 providing cement concrete blocks as supports, anticorrosive treatment 150.00 Mtr 3150.47

with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of

following sizes complete as required. 150mm dia.

Providing, laying, testing & commissioning of 'C' class heavy duty MS

pipe conforming to IS 3589/IS 1239 including Welding, fittings like

elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe

242 on the wall/ceiling with suitable clamp/support frame and painting with 300.00 Mtr 616.18

two or more coats of synthetic enamel paint of required shade

complete as required : 25 mm dia

Providing, laying, testing & commissioning of 'C' class heavy duty MS

pipe conforming to IS 3589/IS 1239 including Welding, fittings like

elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe

243 on the wall/ceiling with suitable clamp/support frame and painting with 150.00 Mtr 1060.92

two or more coats of synthetic enamel paint of required shade

complete as required : 50 mm dia

Providing, laying, testing & commissioning of 'C' class heavy duty MS

pipe conforming to IS 3589/IS 1239 including Welding, fittings like

elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe

244 on the wall/ceiling with suitable clamp/support frame and painting with 150.00 Mtr 1336.71

two or more coats of synthetic enamel paint of required shade

complete as required : 65 mm dia

Providing, laying, testing & commissioning of 'C' class heavy duty MS

pipe conforming to IS 3589/IS 1239 including Welding, fittings like

elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe

245 on the wall/ceiling with suitable clamp/support frame and painting with 150.00 Mtr 1561.16

two or more coats of synthetic enamel paint of required shade

complete as required : 80 mm dia

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

Providing, laying, testing & commissioning of 'C' class heavy duty MS

pipe conforming to IS 3589/IS 1239 including Welding, fittings like

elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe

246 on the wall/ceiling with suitable clamp/support frame and painting with 75.00 Mtr 2116.05

two or more coats of synthetic enamel paint of required shade

complete as required : 100 mm dia

Providing, laying, testing & commissioning of 'C' class heavy duty MS

pipe conforming to IS 3589/IS 1239 including Welding, fittings like

elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe

247 on the wall/ceiling with suitable clamp/support frame and painting with 15.00 Mtr 2959.99

two or more coats of synthetic enamel paint of required shade

complete as required : 150 mm dia

Supplying and fixing single headed internal hydrant valve with

instantaneous Gunmetal coupling of 63 mm dia with cast iron wheel ISI

marked conforming to IS 5290 (Type -A) with blank Gunmetal cap and

chain as required :

Supplying and fixing Single headed external yard hydrant valve with

No. 63 mm dia instantaneous FM Gunmetal coupling and cast iron

wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal

cap and chain as required :

Supplying, fixing, testing and commissioning of butterfly valve of PN

rating with bronze/gunmetal seat duly ISI marked complete with nuts,

bolts, washers, gaskets conforming to IS 13095 of following sizes as

required : 80 mm dia

Supplying, fixing, testing and commissioning of butterfly valve of PN

rating with bronze/gunmetal seat duly ISI marked complete with nuts,

bolts, washers, gaskets conforming to IS 13095 of following sizes as

required : 100 mm dia

Supplying, fixing, testing and commissioning of butterfly valve of PN

rating with bronze/gunmetal seat duly ISI marked complete with nuts,

bolts, washers, gaskets conforming to IS 13095 of following sizes as

required : 150 mm dia

Supplying, fixing, testing and commissioning of butterfly valve of PN

rating with bronze/gunmetal seat duly ISI marked complete with nuts,

bolts, washers, gaskets conforming to IS 13095 of following sizes as

required : 200 mm dia

Supplying, fixing, testing & commissioning of double flanged sluice valve

of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI

254 marked complete with nuts, bolts, washers, gaskets and conforming to 1.00 Nos. 22989.62

IS 780 of following sizes as required : 150 mm dia

Supplying and fixing orifice plate made out of 6 mm thick stainless steel

(Grade 304) with orifice of required size to be fitted between flange &

255 landing valve of external and internal hydrants to reduce pressure at the 1.00 Nos. 1094.05

outlet to the level of 3.5 kg/cm2 complete as required

Providing, installation, testing and commissioning of non-return valve of

following sizes confirming to IS: 5312 complete with rubber gasket, GI

bolts, nuts, washers etc.as required : 100 mm dia

Providing, installation, testing and commissioning of stainless steel Y-

strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet

with 3 mm dia holes with stainless steel flange 100 mm dia

Supplying and fixing GUN METAL 63 mm dia, 15 m long RRL hose pipe

258 with 63 mm dia male and female couplings dulybound with GI wire, 6.00 Nos 4308.30

rivets etc. conforming to IS 636 (type-A) as required :

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

Supplying and fixing first-aid Hose Reel 30M long with MS construction

spray painted in post office red, conforming to IS 884 complete with the

following as required. 20 mm nominal internal dia water hose

thermoplastic (Textile reinforced) type -2 as per IS: 1258520 mm

nominal internal dia gun metal globe valve & nozzle.Drum and brackets

for fixing the equipmets on wall.Connections from riser with 25 mm dia

stop gun metal valve & M.S. Pipe and socket.

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm

nominal internal diameter size nozzle conforming to IS 903 suitable for

instantaneous connection to interconnect hose pipe coupling as

Supplying and fixing of 4 Way 150mm dia fire brigade connection of cast

iron body with gun metal male instantaneous inlet couplings complete

with cap and chain as reqd. for suitable dia MS pipe connection

conforming to IS 904 as required :

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb

262 type sprinklers of rating 68 degree centigrade with required accessories 50.00 Nos 432.32

: Pendent Sprinkler Each

Providing & fixing 100mm dia flow switch in following sizes M.S.pipe

including connection etc as required

Providing, fixing, testing & commissioning of 100 mm dia installation

control valve of cast iron body, brass/bronze working parts comprising

of water motor alarm, bronze seat clapper, clapper arm and

hydraulically driven mechanical gong bell to sound continuous alarm

when the wet riser/sprinkler system activates, pressure gauges,

emergency releases, strainer, pressure switch, cock valve complete with

drain valve and bypass, test control box, ball valves, MS pipe of required

size, flanges, orifice plate, gasket etc of follwing sizes as required :

Supplying, installation, testing & commissioning of sprinkler flexible pipe

(UL Listed) of stainless steel complete with 15 NPT on reducer thread

with maximum working pressure of 175 PSI test pressure of 875 PSI

265 (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head 10.00 Nos 476.22

(Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets,

center bracket, stockbar of following sizes complete as required.

Supply Installing Testing & Commissioning of M.S. Hose Box to

accommodate of 30-Mtr. length Hose Pipe & 1-No. of Branch Pipe

with Nozzle, with necessary support and joints.

Supply & Installing of Gas -Co2 Type –4-Kg, Capacity Fire Extinguisher

267 as per IS And ISI - mark , with necessary Fittings etc. complete. 8.00 Nos 9443.50

Supply & Installing of ABC Type 6-Kg, Capacity Fire Extinguisher as per

268 IS And ISI - mark with necessary Fittings etc. complete. 10.00 Nos 4610.65

Supply, Installing, Testing & Commissioning of Fire Hotter Manual Call

Point, & Control Panel Including Ele. Wire etc. Necessary. ON– OFF

Switch At each floor for pump start And off including pipe and

Wire and other necessary .

Design, supply & installation of safety signage made of zinc base glow in

the dark rigid sheet with high luminous with pasted on 3 mm thick on

rigid PVC foam sheet. Such as Fire Lift, Fire Point, In Case Of fire,Fire

Alaram Panel EMERGENCY t etc.

Supplying, installation, testing & commissioning of heat detector

operating at 54°C/57°C with rate of rise cum fixed tempreature (dual

271 thermistor) type with mounting base complete with all connection etc. 5.00 Nos. 887.00

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

Supplying, installation, testing & commissioning of smoke detector with

272 builtin LED and mounting base complete with all connections 40.00 Nos. 954.91

etc. as required.

Supplying, installation, testing & commissioning fire alarm sounder with

facility to make announcement, mounted in M.S. box (16 SWG) with

273 hinged cover plate & suitable for operation with amplifier i/c line 6.00 Nos. 337.91

matching transformer etc. complete as required.

Supplying, installation, testing & commissioning of main control and

indicating panel made out of 16 SWG MS sheet to accommodate the

following items duly powder coated in approved colour with louvers for

ventilation, locking arrangement, audio and visual indication for fire

alarm and public address system, monitoring system including

connections, interconnections etc complete as required. 6 zone panel

for fire alarm system 100 watt amplifier racks suitable for operation on

230V AC/24V DC supply conforming to IEC-268-3 complete with all

accessories as required-2 Nos. (one to act as standby) Talk back master

station with LED PTT (press to talk) push button for operation on 230V

AC/24 V DC supply conforming to IEC-268 for simplex mode of

operation/communication suitable for 20 Nos.talk back unit-1 set.

Annoucement control desk suitable for selection of different zones

selectively and ON ALL CALL switch with visual indication etc.,complete

as required- 1 set. Amplifier change over switch for inter changing

amplifier- 1 No. Monitor panel for loudspeaker complete output

selector ON/OFF switch, fuse visual indications etc. complete as

required- 1 No. Gooseneck microphone with stand and ON/OFF switch -

1 No. Mains ON/OFF switch, fuse indication lamps, DC and AC

voltmeters & ammeters terminal blocks etc. complete as required -1

set. Battery charger trickle cum boost to take complete load of fire

alarm & PA system complete with all accessories including providing &

Supplying nos. 12 volt,

of 2x1.5 eachfire

sqmm sealed maintenance

alarm free batteries -1

armoured cable,

600/1000V rated with annealed copper conductor having XLPE

insulation, steel wire armouring & FRLS outer sheath complete as

Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be erected

concealed in/ on surface on wall/ceiling complete with 6A Modular type

switch / bell push & accessories and earth continuity of following type,

276 erected on PVC / Metallic box, single mounting base frame covered with 144.00 Pt 449.45

textured/metallic front plate modules erected on / in wall / ceiling as

per pipe erected, with necessary Lamp holder /ceiling rose /

H.D.Connector as directed.(a) with medium class Rigid PVC pipe and

accessories Cat. III

Point wiring for secondary light point with 2-1.5 sq.mm & earthwire of

1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires, in following type of pipe to be

erected concealed in / flushed on wall/ceiling, complete with earth

continuity and necessary connection with primary light with accessories

erected on Metal / PVC box covered with 3 mm thick PC(Polycarbonet)

/ Acrylic sheet for open / concealed wiring. with necessary Lamp holder

/ ceiling rose / H.D.Connector as directed.(a) with medium class Rigid

PVC pipe and accessories

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires erected in below type of

pipe with 6A Modular type switches and following type of accessories

erected on PVC / Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate modules erected on /

in wall / ceiling as per pipe erected. with necessary batten/angle holder

or ceiling rose or H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete CAT III

Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be erected

concealed in / flushed on wall/ceiling complete with 6A Modular type

switch and hum free EME four or more step type electronic fan

regulator with separately mounted and accessories with earth

continuity of following type erected on PVC / Metallic box, single

mounting base frame covered with textured/metallic front plate

modules erected on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed. (a) with medium

class Rigid PVC pipe and accessories Cat. III

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand

copper wires, in following type of to be erected concealed in / on

surface of wall / ceiling complete with Modular type switch & 5 pin Plug

280 erected on PVC / Metallic box covered with appropriate front plate 59.00 Pt 475.71

modules erected on / in wall / ceiling as per pipe erected with following

type of accessories. [I] For 6A Plug with 2-1.5 sq.mm Cu. Wire (a) with

medium class Rigid PVC pipe and accessories Cat. III

[II] For 16A Plug with 2-2.5 sq.mm Cu. Wire (a) with medium class Rigid

PVC pipe and accessories Cat. III

Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket

erected on PVC / Metallic box, single mounting base frame covered with

282 textured / metallic front plate modules erected on / in wall / ceiling with 63.00 Pt 257.55

following type accessories Cat. III

Providing following type of Modular Type Accessories mounted with pvc

/ metallic box, single mounting base frame covered with textured /

metallic front plate , modules erected with necessary connection. As

desired by Engineer In charge

(22) 16/20/25 Amp. Modular Starter for Motor / A.C. Unit Complete

Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected with

284 necessary PVC fittings & Junction boxes fixed with adhesive solution & 1545.00 Mtr. 33.33

Clamps with following dia of pipes, in approved manner as directed (b)

Providing & erecting PVC Corrugated Flexible Conduit with required nos.

285 of coupling, PVC bushes, Check-nuts etc. complete of following sizes.(2) 206.00 Mtr. 21.21

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of following

size (a) with medium class Rigid PVC pipe and accessories (a) 2 wire

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected in / on wall /

ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size (a) with

medium class Rigid PVC pipe and accessories(a) 2 wire 4 sq. mm

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable

1.1 KV grade to be erected as directed of following size.

(K) 4 core 4 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 KV. to be laid on wall with

293 necessary clamps or in existing trench / pipe at road crossing or floor 783.00 Mtr. 364.61

of following size of cables.

(A-1) 4 core 4 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 KV. to be laid on wall with

294 necessary clamps or in existing trench / pipe at road crossing or floor 680.00 Mtr. 676.70

of following size of cables.

(A) 4 core 10 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 KV. to be laid on wall with

295 necessary clamps or in existing trench / pipe at road crossing or floor 433.00 Mtr. 1867.49

of following size of cables.

(B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core)

Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out going

tails, insulating tape etc for following size of cables.

298 (B)2 to 4 core 6 Sq. mm 16.00 Nos 38.38

Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out going

299 tails, insulating tape etc for following size of cables. 8.00 Nos 75.75

(B) 3 & 1/2 core 35/50 Sq. mm

Solder less crimping type Copper lugs conforming to IS suitable for cable

of following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut bolts in an

approved manner.

Providing & erecting Switch board for Computer or electric apparatus

consisting of following items in single board erected on PVC / Metal

board with 3 mm thick PC (Polycarbonate) / Acrylic sheet erected as

directed 1 no. 6A/16A universal plug-switch combined. 4 nos. 6A Switch

4 nos. 6A 5 pin Plug [B] For Modular Type Accessories Cat. III

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as a

heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA

polyester powder coated and high U.V. & corrosion resistance with

diffuser and/or Polycarbonate optics with company mark/name 120 to

300 V,Power Factor more than 0.9, THD < 10 %, CCT 4000 K to 6500K,

Uniformity ratio >0.7, Luminaire efficacy> 85 lumens/watt , LED driver

efficiency > 85 % as per Approved make LED used for luminaire. (Each

fitting required LM-79 & LM-80 Certificates) (A) Tube Light with

integral/non-integral driver.(iv) 22-24 Watts, Surge - 2KV,IP-20,

conventional 4 feet Cat-III

Supplying and erecting led lamps with following wattage capacity of

to 240 voltage, minimum 15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable for E14 / E27 /

306 B22 lamp holders, pf >= 0.5 21.00 Nos. 112.11

(A) LED Lamps integral type, with PC diffuser suitable LAMP holder

(ii) 5 to 8 watts CAT-III

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as a

heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. &

corrosion resistance with diffuser housed in aluminium casted body

with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

307 Luminaire efficacy> 85 lumens/watt , 179.00 Nos. 1794.77

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges shown.)

(B) LED Panel Light with provision for Plane front frame with translucent

cover fixed to housing complete.IP20

(vi) 36 watts, 24" x 24", Surge- 2KV CAT III

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with

308 provision for spring loaded mounting clips complete.IP20 114.00 Nos. 758.51

(iv) 22-24 watts, Surge-2 KV Cat-III

309 (F) Spot Light 425 Lumens, Surge-2KV - (i) 3 to 7 Watts Cat-lll 21.00 Nos. 813.05

(G) Step Light having Aluminium die cast and ABS Plastic material.

310 (i) 3 TO 5 watts, Direct/Indirect luminaire CAT III 54.00 Nos. 573.68

(D) LED Strip Light

311 (ii) Minimum 7.2W -240 LED per meter,(2 wire, IP-65) with non integral 100.00 Mtr 220.18

suitable Driver complete CAT III

(I) Adjustable spot light with COB led having aluminium reflector of

312 following wattage 10.00 Nos. 1097.87

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 1Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High

pressure die cast aluminum housing with smooth finish powder coated

and heat sink extruded aluminium with diffuser and Polycarbonate

optics/ lenses with company mark/name engraved or embossed 120 to

300 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,

Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED

driver efficiency > 85 %.CREE / OSRAM / PHILIPS Lumileds / NICHIA /

SEOUL/ BridgeLux (U.S.A.) make LED used for luminaire. ( fittings

required LM-79 & LM-80 certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -

4KV integral and 10 kv non integral ,Light must have 440VAC line supply

protection. It should withstand 48 hours for 440VAC line supply.

(iii) Above 60 to 90 watts CAT III

Supplying and erecting approved make Octagonal pole made from HR

sheet steel. The pole should be made as per IS. and shall be coated with

hot dip galvanizing as per IS 2629/2633/4759, suitable suspend local

wind speed with integral Junction box consist of terminal plate of min

6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail for MCB

Mounting, stud type terminal and arrangement for cable termination to

be erected With Suitable foundation (Included) as per details given by

manufacturer considering site requirement.

(D) 6 Mtr. Long 70 mm Top X 135 mm bottom dia, 3 mm thickness with

200mmX200mmX12mm base plate, 4-M20 Bolts and 600mm long with

necessary G.I. J Bolts .Approx Pole weight 59 kg

Providing and erecting street light pole bracket comprising main B Class

MS pipe of 4.2 cm/require outside dia. complete with suitable B Class

M.S. sleeve tubing of approx. 45cms.length and suitable for 76.5 mm /

80mm. / require size pole top having sufficient fasteners for fixing the

brackets and having spread of 1 mtr. length with suitable rise as per site

condition & suitable welded stiffener reducer and nipple with check nut

complete painted with one coat of Red oxide / PU base primer and two

coats of Aluminium / PU paint. paint with following nos of arms.

[A] Single Arm bracket 1 Mtr

Providing and erecting street light pole bracket comprising main B Class

MS pipe of 4.2 cm/require outside dia. complete with suitable B Class

M.S. sleeve tubing of approx. 45cms.length and suitable for 76.5 mm /

80mm. / require size pole top having sufficient fasteners for fixing the

brackets and having spread of 1 mtr. length with suitable rise as per site

condition & suitable welded stiffener reducer and nipple with check nut

complete painted with one coat of Red oxide / PU base primer and two

coats of Aluminium / PU paint. paint with following nos of arms.

[B] Double Arm Bracket 1 Mtr

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High

pressure die cast aluminum housing with smooth finish powder coated

and heat sink extruded aluminium with diffuser and Polycarbonate

optics/ lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD

< 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.)

(B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must

have 440VAC line supply with over-voltage protection.

(ii) above 48 to 60 Watts CAT III

(C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot

and spun aluminum canopy fixed with opal polycarbonate, pipe

318 arrangement for vertical mounting driver and accessories wired upto 4.00 Nos. 4819.72

terminal block.IP

(b)32-40W - CAT III

(c) LED Bollard fittings of minimum height 1000 mm & dia.100mm

having polycarbonate clear/milky diffuser mounted on 3mm thick

aluminium finished powder coated pipe with base plate 160x160mm

with erection by M8x75mm fastner with required RCC foundation.IP65

for 9 to 20 watt and above ,surge-4kv cat-III

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom

including excavation for the pole of size 60 x 60 x 120 cm. Deep in below

ground level with plinth of 45 cm x 45 cm(or 45 cm dia x 45 cm) high

upper ground level with necessary curing and finishing in approved

manner. ( for 7.5 & 8/8.5 mtr pole)

Supply, Installation, Testing and Commissioning of suitable sweep, BEE

Star rated, Ceiling fan with Brush Less Direct Current (BLDC) permanent

ferrite magnet Motor, class of insulation: B, Rust free 3 nos.Aluminium

blades, 2 nos. canopies, shackle kit with earthing provision, copper

winding, Power factor not < 0.9, Service Value (CMM/W) minimum

6.85, Air delivery minimum 215 CMM, 350 RPM,230v (tolerance as per

IS : 374-2019), THD < 10%, with remote unit for Speed Control and all

remaining accessories including safety pin, nut bolts, washers,

temperature rise = 75 degree C (Max.), suitable for 140 to 285 Voltage

and rectifier circuit with surge, over current and overload protection

50 Hz, Single phase AC Supply, earthing etc. Complete as required.[

Make shall be approved by Engineer in Charge]

(B) 1200 mm Sweep (48")

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S.

322 Pipe down rod erected duly painted for fan complete with necessary 24/ 134.00 Mtr. 108.07

O.20, 3 core flexible wire with earthing.

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to

the RCC bars up to 50mm length each side and pierced through a

Gauge M.S. box / Heavy Duty PVC box complete erected concealed in

Ceiling with necessary finishing.

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or

Supplying & erecting approved make low noise decorative exhaust fan

325 having size 200mm with 1350 RPM with square frame ABS body with 12.00 Nos. 1703.87

inbuilt lowers & square frame.

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

Providing and erecting Sheet Steel powder coated Vertical MCB

distribution board (VTPN) - flush / surface mounted double door (IP54)

fitted with copper insulated busbar, isolated neutral bar, earth bar and

DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3, suitable for

AMP TPN MCCB + RCCB as incomer and three phase outgoing as per

following .(The DBs should be used of same company of MCB to be

(C)8 way outgoing

Providing and erecting Sheet Steel powder coated MCB distribution

board - flush / surface mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without

MCB to house appropriate nos. of MCBs.(The DBs should be used of

same company of MCB to be used) suitable for

(B) three phase incoming and single phase horizontal type outgoing Per

phase isolation type (PPI)

(b) sheet steel double door

Providing and erecting Sheet Steel powder coated MCB distribution

board - flush / surface mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without

MCB to house appropriate nos. of MCBs.(The DBs should be used of

328 same company of MCB to be used) suitable for 2.00 Nos. 1492.78

(A) single phase incoming and horizontal single phase outgoing

(b) sheet steel double door (IP-43)

Miniature circuit breaker single pole 6A to 32A suitable to operate on

240 V A.C. system and having breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with ISI Mark Cat.III

Providing & erecting 240 V MCB double pole switch for lighting Load (B

330 Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing 8.00 Nos. 299.97

box having following capacity (A) 6 to 32 Amp.

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load

(C Curve) having 10KA breaking capacity & confirms to IS :8828 in

existing box having following capacity

(a) 6 to 32 Amp. Cat.III

332 (b)40 Amp. Cat.III 4.00 Nos. 668.62

333 (c)63 Amp. Cat.III 25.00 Nos. 737.30

Providing & erecting 415 V MCB three Pole for Motor & Inductive Load

(C Curve) having 10KA breaking capacity & confirms to IS :8828 in

existing box having following capacity

(B) for 40 Amp. Cat.III

335 (C) for 63 Amp. Cat.III 2.00 Nos. 716.09

Approved make ELCBs / RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and

suitable for operation on 3 phase and neutral 415V. having

characteristic of quick action & tripping with all advance feature & do

not incorporate any electronic component for following Max. rating

erected as directed.(iii) 63 Amps. FP

Approved make ELCBs / RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and

suitable for operation on single phase 240 V. having characteristic of

quick action & tripping with all advance feature & do not incorporate

any electronic component. for following Max. rating erected as directed

(i) 25 Amps.DP Cat. III

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

Supply, installation, testing & commissioning of Lightening

Arrestor(Protection Level-I). The unit rate shall also includes supply and

fixing of 5 Mtr. Mast on which arrestor should be mounted, down

conductor copper 2 Runs of 1CX70 Sq.mm copper cable from L.A to

earthing pit, Lightening strike recorder "LSR" (Route on the external

facia of the building shall be got approved from the

Client/Consultant/PMC prior to installation).

SITC of Lightening arrestor (Protection level-I) similar to LPI ESE

model-Air Terminal. OR indelec make S 6.60 or ABB make OPR. (Radius

of protection 79 mtr.)

339 SITC of Lightening strike recorder "LSR". 1.00 Nos. 27249.80

SITC of 1C X 70 Sq.mm Copper cableincluding insulator , sadling etc

340 including all necessasy accesaries for Lightening arrestor earthing. 71.00 Mtr. 669.63

Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make Safe Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising,

connection terminal dia of 14 mm with constant ohmic value

surrounded by highly conductive compound with high charge dissipation

suitable for following type of applications with chamber and heavy duty

cover (A)(approved make OEM has to submit test certificate including

value of earth resistance of installation duly stamped and signed by

agency and officer Incharge has to ensure the value of earthing

resistane mentioned in test Certificate) & having back filling compound

of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry

form, Sulphar content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for long time

Necessary test report must be submitted by Agency.

[C] For Electrical Installation covering Transformer Neutrals, Lightning

arrester Earthing, A.C.Plant & Sensitive Computer System(like

Automation, SCADA)i.e. independent Earthing located in other

than normal soil i.e. Soft Rock, Marshy Soil etc..

-Length of Pipe : 3 Mtrs.

Providing Compound

and :2 nos Bags

erecting required size of

Kg. Galvanised iron strip for

342 earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. 67.00 Kg 77.77

using proper clamp. 25mm x 3mm thick

Providing and erecting required size Copper strip for earthing of H.T.

343 OCB / ACB/ Transformer, LT panel board, Motors etc. using copper 77.00 Kg 794.87

Supplying and erecting Multifunction meter.

CT Secondary - Site Selectable 1A / 5A

Flush Mounting - 96x96mm

Parameter:- V, A, F, PF, kW, kVA, Old energy, On and Run hours, site

selectable kWh/ kVAh

Supplying and erecting approved make set of indicator lamps of LED

type lamp, lens cover, Bakelite holder complete erected with necessary

Providing & erecting L.T. Current Transformer with bar primary 50/5 to

346 1000/5 ratio 15 VA burden erected in existing CRCA box duly secured 16.00 Nos. 274.72

with insulating materials connected to the meter

providing and erecting Approved make Four pole moulded case circuit

breaker having breaking capacity ICU of 50 K.A. and above at 415 V

having normal current rating up to 400A. with variable thermal &

347 magnetic release suitable to work on A.C.supply 50 c/s. with all internal 3.00 Nos. 25228.79

connections & complete erected in existing 16 G.M.S. housing

ICS=100% of ICU only Cat III

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

Approved make Four pole moulded case circuit breaker having breaking

capacity ICU of 35 KA. at 415 V. having Normal current rating up to

250A.with variable Thermal & magnetic release suitable to work on

A.C.supply 50 c/s. with all internal connections & complete erected in

existing 16 G.M.S.housing ICS=100% of ICU only Cat III

Approved make Four pole moulded case circuit breaker having breaking

capacity ICU of 35 KA. at 415 V. having Normal current rating up to

200A.with variable Thermal & magnetic release suitable to work on

A.C.supply 50 c/s. with all internal connections & complete erected in

existing 16 G.M.S.housing ICS=100% of ICU only Cat III

Approved make Four pole moulded case circuit breaker having breaking

capacity ICU of 25 KA. at 415 V,having normal current rating up to 25 A

to 100A. with Fixed thermal & magnetic release suitable to work on A.C.

supply 50 c/s. with all internal connections & complete erected in

existing 16 G.M.S. housing. ICS=100% of ICU only Cat III

Providing and erecting Approved make Earth fault Relay suitable to

mount with inter connection suitable to following size of moulded case

circuit breaker having CT ratio & MCCB rating as following along with

shunt trip 220V AC. with all internal connections & complete erected in

existing M.S.housing..

Providing and erecting following additional parts for panel mounting

352 (A)Extended operating rotary handle with pad lock with three position 12.00 Nos. 873.65

trip,off,on suitable for 25A to 250 A panel mounting cat-III

Providing and erecting following additional parts for panel mounting

353 (B)Extended operating rotary handle with pad lock with three position 3.00 Nos. 1310.98

trip,off,on suitable for 400A to 630 A panel mounting cat-III

Supplying and erecting triple pole & neutral 440V / 500V panel

mounting Copper Busbars with four equal Nos. of electrolyte bus having

current density not more than 1.6 Amp. / sq.mm (Rated current / cross

section area) duly wrapped with colour insulating tape for phase

354 sequence of following current carrying capacity, erected with necessary 8.00 Mtr. 7319.47

bus bar supports /insulators, main cable socket to each bar, erected in

existing cubical panel with necessary connections.

(D) Suitable for 400 Amp. capacity

355 (C) Suitable for 300 Amp. capacity 6.00 Mtr. 4909.61

356 (B) Suitable for 200 Amp. capacity 2.00 Mtr. 3202.71

Providing & erecting weather proof, dust & vermin proof, floor mounted

front operated indoor type cubical panel board necessary IP-42 and

above protection as per approval from engineer incharge made from

SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC

357 M.S.sheet for internal partitions with necessary accesories , supporting

angles/ flats channel including cutting, bending, drilling, welding,

riveting with internal partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

supplied switch gears, BUSBARS, suitable size of inter connecting PVC

copper wire / copper-aluminium strips, rubber grommets, rib, bakelite

control fuses/MCB for measuring instruments, earth bus & earth bolts,

foundation flange - bolts-base Plates, sufficient nos. of hinged doors,

handles with locking arrangement and rubber gasket,heavy duty end

terminal connection,danger notice board,necessary ventilation,earthing

strip complete. The Panel shall be painted with epoxy powder coating.

(The rates excludes the cost of switchgears, bus bars, inter connecting

mains & Copper Aluminium strips, meters, Fuses etc. The dimension

shall be measured excluding base beams) The panel shall be supplied

(B) The approved

standard manufacturers

companies switch gear with

shall following size.only

manufacturers at CPRI approved factory 9.00 SqMt 14902.55

(i) with 350mm depth

Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed

copper conductor with heat resistant PVC insulated conforms to IS

IEC - 227 erected in existing pipe of following size (Specifically for

358 control panel, relays, power switchgears, motor starters & control 102.00 Mtr. 12.12

wiring) with required size of copper lugs, nuts and bolts if required.

(a) One wire 1.00 sq. mm

359 (b) One wire 1.50 sq. mm 206.00 Mtr. 17.17

360 (c) One wire 2.50 sq. mm 52.00 Mtr. 27.27

361 (e) One wire 6.00 sq. mm 82.00 Mtr. 56.56

362 (f) One wire 10.00 sq. mm 52.00 Mtr. 91.91

363 (g) One wire 16.00 sq. mm 103.00 Mtr. 142.41

364 (h) One wire 25.00 sq. mm 103.00 Mtr. 236.34

Design, Supplying, installing, testing of factory fabricated ready made

Three phase APFC Panel Cubical Panel fabrication should be type tested

as per IEC 61921, 61439:1&2 Capacitor Duty Contactor for switching as

per following Steps Incomer Switch of MCCB type Icu=Ics=50KA at

400/440 Volts, with OC, SC, internal earth fault protection Incomer

Switch of MCCB type Icu=Ics=50KA at 400/440 Volts, with OC, SC,

internal earth fault protection,Copper insulated Busbar,Cubical panel

should be indoor type with IP 43 and IK 10,Metalized polypropylene film

type, 3-phase 550Volt Capacitor,De tuning Reactor for each

365 capacitor,Panel having Short Circuit and Overload protection,Each step 1.00 EACH 288878.18

Capacitor having suitable MCB with Sc, OL, internal earth fault

relay,Each stage having Stage Contactor (Capacitor load rating),PF

regulator master controller having suitable steps with LCD display, Rs

485 Communication port, Indication LED Lamps for main incomer and

ON-OFF for each capacitor bank,MS Chanel for Floor mounting, Cable

entry as per site situation,Cooling fans for panel,

(C)100KVAR (APPROX 8 STAGE)

Providing & erecting water cooler having storage capacity 150 Ltr. &

cooling capacity 150 Ltr.per hour @ an ambient temp of 450 C. The

outlet temp. of the water should drop by 150C within a hour, The water

cooler should be comprising of hermetically sealed compressor, fan

motor, condensing unit, water tank surrounded by evaporating, coil,

thermostats, relay etc.complete with necessary inlet & outlet

connection. The body of water cooler will be made from Stainless Steel.

Supplying and erecting water filter cum purifier with ultra violate

367 technology. (Aquaguard / waterdoc model or equivalent symphony/ 3.00 Nos. 5424.71

crystal/videocon model)

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

connecting accessories of same material at required depth in existing

trench for laying of cable. below ground / road surface for enclosing

(A)50 mm outer dia

Providing and fixing approved make Perforated C type cable tray. Made

from sheet steel. The cable tray should be single or double bended as

per required and as per IS 2062/1079 and shall be coated with hot dip

galvanizing as per IS 2629/4759. with max 17.5% perforation with

369 coupler plate / Fish plate and GI hardware like nut - bolt and washers 290.00 Mtr 622.16

etc. erection with necessary support( included) as per Specification and

as per instruction of engineer in charge..

(5) 300 X 50 X 1.5 mm Thick

Supplying and erecting Direct on line starter with 30 Amp. (resistive @

230v) power relay and with 2 to 5/ 4 to 10 / 8 to 20 amp. Range C.T.

Operated electronic overload relay in engineering grade plastic

enclosure for 3 ph 415v 50 HZ A.C. motor up to 7.5 HP with high voltage

protection (above 480 v) and under voltage protection (below 330 v)

current sensing single phasing protection. Reverse phasing protection,

inverse current characteristic overload protection with indication for

On, OL, HV, LV SPP in a single unit with feather touch start / stop push

button, high temperature with standing Bakelite terminals complete

erected on P.W. Block with necessary connection. [Cat.II]

Providing and erecting Inverter based approved make split air-

conditioning unit consisting of condensing unit with variable speed fan

motor, inverter type hermetically sealed rotary compressor with

accessories etc. duly connected separately erected evaporating unit and

blower motor with its accessories by means of extra supplied proper

371 insulated copper tubing,drain PVC pipes suitable for ( cost includes Eco 23.00 Nos. 63765.34

Friendly green gas charging and 15A plug top & Remote Control & MS

Stand) with necessary core cutting.

(2)For ISEER Range (KWH/KWH)(4.0 to 4.49)

(C) for 1.7 to 2 ton capacity

Supplying and erecting, commissioning and testing of Diesel Generating

set confirming to IS: 4722:1968 & BS:5514 having continuous rating,

phase, 415 volts, 50 cycles A.C. supply comprising of a totally enclosed

air/water cooled diesel engine with multi-cylinders developing suitable

BHP not less than following capacity at 1500 RPM with 10% overload

for one hour in 24 hours with standard accessories like fly wheel,

lubricating oil cooler, "A" class governor, heavy duty fuel wheel and

lubricating oil filter, oil bath air filler, lubricating oil pressure gauge, end

exhaust manifold, standard set of tools with adjustable spanners, screw

drivers, cylinder head to cover, joint cylinder head to exhaust, element

lube oil filter, 12 / 24 volts electric starting equipment complete with

standard heavy duty battery, dynamo, cut-outs, ammeter, necessary

wiring, pressure gauge, starter etc and heavy duty Residential type

exhaust silencer (With DEF System) and vertical hot air duct both

logged with asbestos rope, save oil trays, exhaust piping of required

length, standard wall/floor mounted fuel with level indicator and piping

and drip proof alternator, self excited, self regulated, screen protected,

with excitation system, capable of delivering the rated system output at

415 volts, 3 phase, 0.8 PF, 50 Hz, 4 wire, running at 1500 RPM,

conforming to IS-4722- 1968 with voltage regulation +/- 5% of rated

voltage from no load to full load. Both the engine and alternator fitted

on a common fabricated steel base plate with antivibration mounting

engine and alternator both connected to each other by flexible flange

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

indicator lamps duly wired with HRC fuses. The alternator & control

panel shall be connected with provided suitable capacity armoured

cable and complete with Acoustic enclosure (canopy) made out of

SWG CRCA Sheet, sound absorbing material Rockwool of 64 density &

100 mm thick conforming to IS:8183 / PU Foam of 40 Density - at least

40 mm. The resin bonded rockwool covered from inside the canopy by

perforated sheet with 3/4 mm holes, sound level not more than 75 dB

at a distance of 1 mtr, as per PVCT norms.DG set should have in built

fuel tank capacity of minimum 8 hrs of continous running capacity on

full load . Erection, commissioning and satisfactory testing as per

requirement with first filling of fuel (minimum up to the 80% of fuel 1.00 Nos. 1396603.76

tank capacity), oil, etc. with guarantee / Warrantee of complete system

for Two years. & with obtaining all necessary certificate from Electrical

Inspector. The Capacity and Ratings of DG sets are as below. (As per

new CPCB4+ Emission norms Engine With - Turbo Charger, EGR

(Exhaust Gas Recirculation), CRS (Common Rail Fuel System), DOC

(Diesel Oxidation Catalyst), SCR (Selective Catalytic Reduction),

Integrated wiring harness connected to ECU .

(O) Continuous rating of 160 KVA ,BHP not less than 197 BHP

Providing & erecting approved make AMF control panel suitable for

following size of 3 phase, 415 V., 50 cycles, A.C. diesel generating set

complete of scope as detailed below:

1) Power module: A pair of electromechanically interlocked contactors

(for mains & generator) Overload relay for generator contactor Neutral

contactor for mains and generator Power socket for connections.

2) Control and metering module: Line voltage monitor. Generator

voltage monitor Ammeter 3 items attempt start facility. Air circuit

breakers/MCB/MCCB of suitable rating for auto/manual operation.

Auto/manual switch. Emergency stop push buttons. Manual start push

button. frequency meter. Engine hour meter. Two earthing studs.

3) Protection module: The engine shutdown in the unlikely event of Low

Providing & erecting approved make ATS panel suitable for following

size of 3 phase, 415 V., 50 cycles, A.C. diesel generating set complete of

scope as detailed below:

1) Power module: Motorised Changeover switch with ATS controller,

374 Auxiliary contactor with NO & NC contacts with Automatic Battery 1.00 Nos. 82170.57

Charger, indicating lamps for Generator ON, Mains ON, Load and

suitable control terminals and power terminals with neutral earthing

(F) ATS Panel for 160 KVA 3 phase DG Set

SITC of Chairman Unit shall enable the user to function as chairman of a

conference or meeting. It shall be similar in appearance to the Delegate

Unit, and shall also include a ‘chairman priority button.When pressed,

the priority button shall cause all currently active delegate microphones

to be temporarily or permanently muted, allowing the chairman to take

control of the meeting.

375 To prevent acoustic feedback, the built-in loudspeaker shall be muted 2.00 Nos. 38726.43

when the microphone is on, and/or the headphones are connected.

An optional chime shall be selectable to precede chairman priority calls.

[Approved by Competent Authority i.e. not Below the rank of Executive

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

SITC of Delegate Unit shall enable delegates to speak and listen to the

proceedings via a loudspeaker or headphones. The unit shall include a

microphone with a red indicator ring, which shall illuminate when the

microphone is on.

The unit shall include a ‘Possible To Speak’ white LED indicator, which

shall illuminate showing the delegate when it is possible to switch on

the microphone.

To prevent acoustic feedback, the built-in loudspeaker shall be muted

when the microphone is on, and/or the headphones are connected.

376 Two 3.5 mm stereo headphone sockets (wired for mono) shall allow 30.00 Nos. 32024.07

two pairs of headphones to be connected, enabling two delegates to

simultaneously use the unit.

The headphone volume level shall be adjustable on the unit for

maximum comfort. It shall also be possible to connect a tape recorder

to one headphone socket, and use the other headphone socket to listen

to the proceedings.

[Approved by Competent Authority i.e. not Below the rank of Executive

Conference System Controller

SITC of CONTROL UNIT RECORDER DAFS Plug-and-play functionality for

quick and easy connection of up to 80 Discussion Devices Intuitive web

browser interface control for advanced configuration and control

Built‑in MP3 recorder with internal memory and USB recording Built‑in

377 Digital Acoustic Feedback Suppression (DAFS) for ensuring superior 1.00 Nos. 180086.03

speech intelligibility On-board support for automatic HD camera control

[Approved by Competent Authority i.e. not Below the rank of Executive

Providing and erecting cordless microphone with UHF Diversity

handheld wireless microphone/caller wireless complete with receiver

and transmitter unit,Cardiod ,polar pattern,dynamic microphone,LCD

display for battery and frequency status and information ,32 preset

channels,with compatible groups of 8 channels,14 hrs.battery

378 life,frequency response 80Hz to 18KHz.,RF sensitivity <1.0 Uv,image 8.00 Nos. 5135.85

rejection > 55 dB,dynamic range >95 dB and receiver having

channels,S/N ratio>100 dBA,Dynamic range>95 dB,distortion<1%

[[Approved by Competent Authority i.e. not Below the rank of Executive

Supplying & erecting dual channel amplifier ,power handling capacity of

180 watt ,four micro phone inputs with independent level control ,built

in FM tuner,with preset memories,USB drive & SD card for MP3

playback ,100v /telephone input with priority and VOX,frequency

response-80 Hz to 18k Hz Philips / /distortion less than 1% @ rated

power up to 50 units [[Approved by Competent Authority i.e. not Below

the rank of Executive Engineer ]

Supplying and erecting wall mount speaker with rated power of

watt/power tapping 30/15/7.5 watt available,opening angle 180 degree

H * 77 degree V ,sound pressure level 88 dB ,frequency response of

70Hz to 20KHz [[Approved by Competent Authority i.e. not Below the

rank of Executive Engineer ]

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

SITC of 3LCD Lamp based projector having wxga (1280x800) or better

resolution with minimum white brightness of 3800 lumens and color

brightness of 3800 lumens. The projector should have minimum

1HDMI,1VGA input. Having contrast ratio of 15000:1 or more. the

projector should have auto vertical key stone correction of +/-

degree and Manual Horizontal of +/-30 degree. the projector should

have optical lens, throw ratio 1.30-1.56:1. Zoom Factor of 1.2. Lens

focus Manual having focal length 16.9mm to 20.28mm. projector should

have features like AV mute slide, quick corner and split function and

should support wireless functionality with inbuilt wifi or wifi dongle.

[Approved by Competent Authority i.e. not Below the rank of Executive

SITC of universal Projector mounting kit, with necessary grouting,

fasteners etc. with adjustable height and suitable for all types of

projectors. [Approved by Competent Authority i.e. not Below the rank

of Executive Engineer ]

Projector Screen

SITC of 120 inch Self Lock MW (8 x 6) Instalock Slow Retraction Screen,

Aspect Ratio-4:3

[Approved by Competent Authority i.e. not Below the rank of Executive

Supply, Installation Testing & Commissioning 15 Mtr. HDMI Interface

384 Cable as per the detailed Specifications supports transmission of 4K 1.00 Nos. 1777.60

Signals as per the detailed Specifications

Supply, Installation, Testing and Comissioning of USB Ultra HD

4K@30fps Video Conferencing Camera, 1/2.7" CMOS 8 MP sensor,

Degree Wide FOV, 8 X digital zoom with ePTZ Technology, built in 2Nos

Beamforming mic, AI Tracking and Auto Framing, Supports WDR,

Automatic white balance, 2D & 3D noise reduction, Unique noise

supression and Auto echo cancellation, USB 3.0 interface, BIS, CE,FCC,

RoHS certified.

[Approved by Competent Authority i.e. not Below the rank of Executive

Supplying & erecting Amplifier having following specification:

Power Output :250W (RMS) (300W Max.)

inputs : 6 Misc. & 2 Aux.

frequency Response :50-1500HZ I3db

Tone Controls :Cut & Boost type

386 LED Meter :5 LED Arrays 2.00 Nos. 11298.87

The amplifier suitable to operate 240V A.C.& 24volt D.C. (Battery) with

automatic changeover from AC to Battery operation, duly protected by

wrong Battery Polarity connections. [[Approved by Competent

Authority i.e. not Below the rank of Executive Engineer ]

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

MIXERS/MIXING CONSOLES

Supplying & erecting Mixing Console having channels, Audio mixer with.

Echo facility for live performance, Auditorium & stadiums, having

following features & facilities. [[Approved by Competent Authority i.e.

not Below the rank of Executive Engineer ]

(a)input Channels :- Each channel has separate 6.25mm size balanced

phone jack for mike & line for balanced & unbalanced signals.

(b)Individual gain control for sating optimum level for minimum noise.

(c)BASS, MID & TREBLE ‘ controls Separately for each input channel.

(d)ECHO control for each channel (e)PAN control for echo channel for

387 left or right output (f) AUX Control : To control , level of the channel in 0.00

final mix to AUX sound output (g)Channel ON/OFF switch (h)ECHO

Section :- ECHO, reverb & Chorus effect can be added to all input

channel by different setting of Delay, Reverb & Level control. (i)Tape

section (j)Aux. send & return For sending Pre-feeder output of channel

for monitoring or adding a special effect unit. (k)Mono / Stereo output

controls (L)Master faders to control over left & right output (m) Head

phone output for monitoring purpose.

Technical specification

(a)Power Requirement -AC220-24OV 50 Hz DC 24 Volts

(b)MIC Output Impedance/gain -2 K Ohms/ 62 dB

(c)Line Output Balance/42 dB —- 20 K ohms

(d) Impedance / Gain :- 10Kohms unbalance / 42 dB

(e)frequency Response - 30 Hz- 20 KHz L / R Line Output ( + 0, -1

(f)Equalization Bass/ - + / - 12 dB at 100Hz Mid / Treble 2 1.00 Nos. 18386.04

(g) Outputs, Line Output Line Output Low : -10 dB / -2 dBM Line

Output High : 0 dBM / +17 dBM (775 mv / 5.5 V )

(h) S/N ratio Line Output Level : > 70 dB (0 dB, 0.775V)

The Console shall be mounted on standard Rack, The channel of

following numbers.

(A) 14 Channel Audio Mixer with ECHO

Supply, Installation, Testing & Commissioning of following size of Grid

Tied Solar Power Plant with

Solar Panels (ALMM approved): Frame Material : Anodized Aluminum

alloy Frame With Twin Wall Profile, Front Cover : High Transmission Low-

Iron Tempered Glass (AR Coated), High efficency and positive power

tolerance Pmax: 0/+5, Module Efficiency should be approx. 19.5%-22%,

Normal operating temperature 45'C, Junction Box with Waterproof IP67

& MC4 Compatible and Enclosed with Bypass diodes, 100%

Electroluminescence test to ensure error free Modules, Thep. temp. co-

efficient of the PV module shall equal or better than -0.45%/degree C.

Solar PV modules of minimum fill factor 75% to be used. Unit

Production:- More than 4.5 Unit /kw /day (Actual)(1Year Avg) With

year Product warranty and 25 year Linear Power Warranty includes all

mechanical and electrical parameters of the Solar panel. Modules must

be complied to the DCR(Domestic content requirements). The Ration of

AC to DC is 5:6 for the Installation capacity which are given in AC KW.

Solar Inverter: MPPT Range: MPPT Range: 80-1000 V , Max efficiency:

97.5% - 98.9%, O/p Frequency: 50/60Hz, Operating Altitude (m) ≤4000,

O/p Power Factor: ~1, O/P THDi: <3%, Operating Tempreture Range: -

25~60°C, Integrated protection of Inverter are Anti-islanding Protection,

Input Reverse Polarity Protection, Insulation Resistor Detection, Ground

fault protection, Residual Current Monitoring Unit, Output Over Current

Protection, Output Short Circuit Protection, Output Over Voltage

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

Integrated, Input Reverse Polarity Protection Integrated, Insulation

Resistor Detection Integrated, Residual Current Monitoring Unit

Integrated, Output Over Current Protection Integrated, Output Short

Circuit Protection Integrated, Output Over Voltage Protection

Integrated, Protection Degree: IP65, User Interface LCD &

APP,Datalogger & Communication: GPRS / Wi-Fi, Module Mounting

Structure: The mounting (Rectangular pipe / square pipe / circular pipe)

with requisite cross bars, nuts and bolts, etc. shall be Hot deep

galvanized with minimum 80micron coating. The Rectangular / square

/circular hollow pipe section used for the structure should have a 0.00

minimum thickness of 2.0 mm. other than above, the material thickness

should be minimum 2.5 mm. A certificate of a structural engineer

certifying the strength and stability of the mounting structure to

withstand the weight and wind speed of 150 km/hour throughout the

life span of 25 years of the system, shall be submitted by the vendors.

Hot Dipped Galvanized steel coils. suitable arrangement for base plate

for foundation , solar panel mounting, the structure should be suitable

for carry the load of solar panel,wiring, sprinkler system etc. with

necessary foundation work/wall mount, j bolt, anchor fastner etc. the

(D) Grid usedSolar

for installtion of stucture

Power System: should

26 - 50 kW (3be- phase)

(SS 304) quality.The 50.00 Per KW 42156.39

Water Sprinkler System

Providing & erecting Automatic solar panel cleaning system for solar

power projects which includes necessary plumbing work (UPVC pipes

and accessories) from source of water to project site (upto

meters),Suitable size of sub mercible/ open well motor, necessary

wiring for motor and sprinkler system with safety, timer circuit for

automatically on/off the sprinkler system, necessary size oand number

of nozzles/JET (minimum 1 Nozzle/Jet per module).

(D) 21KW-50KW Cleaning System

Supply Installation, Testing & Commissioning of modular type Variable

Refrigerant Volume air cooled Outdoor units suitable for cooling and

heating, having all hermetically sealed inverter type Scroll

Compressor(s), microprocessor based Controller, top discharge type

condensing unit(s), with R410 A Refrigerant (Or Eco Friendly Green Gas

if any), vibration isolators, with suitable foundation, MS Stand for Unit

with necessary paint etc. complete as required. The unit shall deliver the

390 rated capacity at AHRI Conditions and work even at 50°C ambient 88.00 PER HP 22233.13

temperature without tripping. The unit shall be suitable to work on

400V +/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled

with first charge of the refrigerant and ready for use as required. The

COP at AHRI conditions shall not be less than 3.1 and IEER not less than

6.5. (Design should be got approval before execution from engineer in

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

Supply, installation, testing and commissioning of following minimum

capacity and external static pressure VRV ceiling mounted ductable type

Indoor unit equipped with washable synthetic media pre-filter, fan

section with low noise fan/dynamically balanced blower, multispeed

motor, coil section with DX copper coil, electronic expansion valve,

corded remote control, outer cabinet, vibration isolators, drain pan,

other necessary supports etc., suitable for operation on single phase AC

supply 230 V ± 10%, 50 Hz complete as required. The unit shall have

automatic force shut down provision in case of fire on receiving signal

from BMS System. The cooling capacity of indoor unit will be at air inlet

conditions of 27 Degree C DB and 19 Degree C WB temperature.

High Static Ductable units (minimum 110 pascal external static pressure)

Supply, Installation, testing and commissioning including vaccumiazation

and Nitrogen testing of following nominal sizes of soft/hard drawn

copper refrigerant piping for VRV system, complete with fittings, with

suitable adjustable ring type hanger supports, jointing/brazing including

accessories, insulated with XPLE Class-0 tubular insulation/with Class-0

closed cell elastometric nitrile rubber tubular sleeves sections of

specified thickness as given below for Suction and Liquid lines, all

accessories as per specifications etc with necessary refrigerant joint as

(D) 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with

mm thick insulation

Supply, Installation, testing and commissioning including vaccumiazation

and Nitrogen testing of following nominal sizes of soft/hard drawn

copper refrigerant piping for VRV system, complete with fittings, with

suitable adjustable ring type hanger supports, jointing/brazing including

accessories, insulated with XPLE Class-0 tubular insulation/with Class-0

closed cell elastometric nitrile rubber tubular sleeves sections of

specified thickness as given below for Suction and Liquid lines, all

accessories as per specifications etc with necessary refrigerant joint as

(E) 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with

mm thick insulation

Supply, Installation, testing and commissioning including vaccumiazation

and Nitrogen testing of following nominal sizes of soft/hard drawn

copper refrigerant piping for VRV system, complete with fittings, with

394 suitable adjustable ring type hanger supports, jointing/brazing including 62.00 Rmt 1362.49

accessories, insulated with XPLE Class-0 tubular insulation/with Class-0

closed cell elastometric nitrile rubber tubular sleeves sections of

specified thickness as given below for Suction and Liquid lines, all

Supply, as per specifications

installation, etc with necessary

testing & commissioning refrigerant

UV coating joint1 as

395 layer of glass cloth and 2 coats of UV paint for Exposed piping insulation 206.00 Rmt 1466.52

Rigid UPVC drain pipe of 10 Kg/cm2. rating with 9 mm thick.nitrile

396 rubber insulation. 124.00 Rmt 129.28

Supply, installation, testing & commissioning of control and

communication cabling between the indoor and outdoor units in the

rigid PVC conduit.

(C) 4C X 1.5 Sq mm Shielded Armoured

NAME OF WORK :- Redevlopment of Town Hall At Gandhidham. (4th Attempt)

Item Description Quantity Unit Rate With 1% LC Amount in Rs.

Air conditioning ducting work

Supply, installation, balancing and commissioning of factory

fabricated GSS sheet metal rectangular/round ducting complete with

398 neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, 422.00 Sq. M 1519.04

supports etc. as per approved drawings and specifications of following

sheet thickness complete as required.

Supplying and erecting Return Air antismudged type grille without VCD

400 (Volume Control Damper) in aluminum extruded construction duly 31.00 SqMt 7073.03

Supplying and erecting Exhaust Air grilles with VCD with Powder coated

401 aluminium extruded sections with integral flanges on all sides as per 36.00 SqMt 10431.28

required size & locations

Supplying and fixing of following thickness duly laminated

aluminum foil of mat finish closed cell Nitrile rubber (Class "O")

insulation on existing duct after applying suitable adhesive for

402 Nitrile rubber. The joints shall be sealed with 50 mm wide and 3 mm 844.00 SqMt 877.69

thick self adhesive nitrile rubber tape insulation complete as per

specifications and as required.

Central Control System

(B) Central wired Remote Control System

Supply, installing, testing and commissioning 24- Chanel Video/Audio

Recording Network Video Recorder, Total 480/400 fps (NTSC/PAL), PTZ

404 Control, Time synchronization between NVR and time server or other 1.00 Nos. 19240.50

NVR as per instruction by EIC/Consultant

Supply, installing, testing and commissioning of 1.3 Mega pixel Dome

Camera 1/3" CMOS sensor, 20m IR distance, IP 66, PoE, IPv4/IPv6,

405 ONVIF ver 2.0 with neccesary power supply arrangment suitable for 22.00 Nos. 5544.90

indoor ceiling/surface mounted type as per instruction by

EIC/Consultant.

Supply, installing, testing and commissioning of 1.3 Mega pixel bullet

Camera 1/3" CMOS sensor, 20m IR distance, IP 66, PoE, IPv4/IPv6,

406 ONVIF ver 2.0 with neccesary power supply arrangment suitable for 12.00 Nos. 5252.00

indoor ceiling/ surface/ wall/ column mounted type as per instruction

by EIC/Consultant.

Supply, installing, testing and commissioning of 8 chanel POE switch as

per instruction by EIC/Consultant

Supply, installing, testing and commissioning of 16 chanel POE switch as