PROVN FOR TOILETS FOR AGNIVEERANGANAS AT AF STN BHUJ

Amount

Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes pier holes etc not exc. 10sqm on plan and not exc 1.5m in depth and getting out in any type soil complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes pier holes etc not exc. 10sqm on plan and exc 1.5m but n exc 3.0 m in depth and getting out in Hard/dense soil complete all as specified and directed by Engineer-in-Charge.

Returning filling in,including spreading, levelling, watering and well ramming in layers, not exc 25 cm in soft/loose soil complete all as specified and directed by Engineer-in-Charge.

Removing excavated material n exc 50 m and depositing where directed at level n exc 1.5m above the starting poin complete all as specified and directed by Engineer-in-Charge.

Material & labour for cement concrete (1:4:8) type D2 using 40mm graded stone aggregate as in foudation, filling, sub base and mass concrete complete all as specified and directed by Engineer-in-Charge.

Material & labour for reinforced cement concrete (M-25 Design mix) (using 20 mm graded stone aggregate) in foundation, footing, foundation beams, plinth beams, bases for columns, pedestal, under reamed piles, mass concrete, etc complete all as specified and directed by Engineer-in-Charge

Material & labour for reinforced cement concrete (M-25 Design mix) (using 20mm graded stone aggregate) as in beams, cantilevers, bressmummers, lintels over 1.5 m span complete all as specified and directed by Engineer-in-Charge.

Material & labour for reinforced cement concrete (M-25 Design mix) (using 20mm graded stone aggregate) as in slabs supported on walls, beams and column in floors, roofs, landings, balconies, deck slabs and in shelves and the like complete all as specified and directed by Engineer-in-Charge.

Material & labour for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete complete all as specified and directed by Engineer-in-Charge.

Material & labour for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (horizontal or sloping) for flat rough finished surfaces of concrete complete all as specified and directed by Engineer-in-Charge.

Material & labour for form work to edges of concrete flats, treads, breaks in floors window cills, concrete railing, openings in concrete walls, floor and roofs n exc 20 cm wide and side of RCC/PCC bands in walls, horizontal or sloping and similar work complete all as specified and directed by Engineer-in-Charge.

Material & labour for MS TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hoopinbg for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.

Material & labour for MS TMT bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hoopinbg for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.

Material & labour for MS TMT exc 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hoopinbg for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.

Material & labour for precast cement concrete block masonry type 1:3:6 using 20mm graded stone aggregate with solid blocks, exc 10cm in width and setting in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

Material & labour for 50mm thick PCC 1:3:6 C-0 using 12.5mm graded crushed stone aggregate as in roof padding over a coat of cement slurry incl water proofing compound complete all as specified and directed by Engineer-in-Charge.

Material & labour for 10 mm thick screed bedding in cement mortar 1: 3 on concrete surfaces, finished fair & even including mixing water proofing compound as per manufacturer's instns complete all as specified and directed by Engineer-in-Charge. Note- WPC to be measured separately as supply only

Material and labour for applying a priming coat of cold bitumen primer @ 0.30 ltr/sqm as per para 11.44.5 of MES SSR Part-I complete all as specified and as directed by Engineer-in-Charge.

Material & labour for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface shall be laid by torch application method and the entire surface shall be finally painted with one coat of bituminious paint complete all as specified and directed by Engineer-in-Charge.

Material & labour for 15 mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:4 and finished rough for receiving tiles as in dado complete all as specified and directed by Engineer-in-Charge.

Material & labour for glazed ceramic coloured tiles in vertical surfacaes 350x250x7mm/450x350x7mm thick set set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment complete all as specified and as directed by Engineer-in-Charge.

Material & labour for screed bed or bedding layer 15 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed by Engineer-in-Charge.

Material & labour for Non-skid ceramic coloured tiles (square/rectengular) 7 to 8 mm thick, Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed by Engineer-in-Charge.

Material & labour for rough dressed sand stone slab 20 to 25 mm as in chajja or platform bedded and jointed in cement mortar 1:6 and pointed in cement mortar 1:3 complete all as specified and directed by Engineer-in-Charge.

Material & labour for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement bmortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engineer-in-Charge.

Material & labour for powder coated /anodised aluminum door window frames ,other sections for doors , windows , ventilators with one or more rebates , channel for sliding shutters , grills etc including jointing cleats for fixing etc complete all as specified and directed by Engineer-in-Charge.

Supply & fix 100 mm extruded powder coated aluminium alloy handles fabricated type, anodised complete all as specified and directed by Engineer-in-Charge.

Supply & fix 100 mm butt hinges, extruded powder coated aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply only rubber gasket for fixing of glass complete all as specified and directed by Engineer-in-Charge.

Supply & fix aluminum alloy wire cloth , 0.45 mm nominal dia of wire and avg width of aperture 1.40mm and fixed with aluminum stapples complete all as specified and directed by Engineer-in-Charge.

Material & labour for 10 mm thick internal plaster in CM (1:6) on other than fair face of brick work surface finish even & smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Material & labour for 15 mm thick external plaster in CM(1:4) on fair face of brick work surface finished even & smooth without using extra cement with WPC complete all as specified and directed by Engr-in-Charge.

Material & labour for rendering 5mm thick in CM 1:3 on concrete surfacves/ chajja/ ceiling, etc as in ceiling finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material & labour for providing edge moulding to 18-20mm thick granite stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete , of frame size 105 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and as directed by Engineer-in-Charge.

Material and labour for providing cement concrete 1:3:6 type C-0 using 20mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified and directed by Engineer-in-Charge.

Supply & fix flush shutters 30 mm thick , solid core construction, with block board core and plywood face panel , commercial type on both side complete. Including edges of door covered with teak bid and makng provision for fixing mortice lock and hinges complete all as specified and directed by Engineer-in-Charge

Material and labour for 150mm Mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed by Engr-in-Charge.

Supply & fix 150mm size mild steel barrel tower blots, stove enamelled black, with bright bolt and fixed complete all as specified and directed by Engr-in-Charge.

Supply & fix 300 mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed by Engineer-in-Charge.

Supply & fix aluminium extruded body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed by Engineer-in-Charge.

Material & labour for hardcore of gauge nexc 63mm , deposited , spread and levelled in layers nex 15cm thick watered and rammed to a true surface complete all as specified and directed by Engineer-in-Charge.

Material and labour for 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth protection laid to slope of 1 in 12 and finishing cement concrete surface even and smooth without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering of exposed edges where directed and providing 6 mm thick joints through the thickness of plinth protection duly filled with mastic filling of one part of hot bitumen 85/25 grade and three parts of fine sand (all by weight) complete all as specified and directed by Engineer-in-Charge.

Supply & fix cast iron pipe (sand cast) for waste and vent pipe with or without ears, with cement joints fixed to walls, 75mm dia complete all as specified and directed by Engineer-in-Charge.

Supply & fix cast iron pipe (sand cast) for waste and vent pipe with or without ears, with cement joints 100mm dia laid in trenches complete all as specified and directed by Engineer-in-Charge.

Supply & fix cast iron pipe (sand cast) for waste and vent pipe with or without ears, with cement joints 75mm dia laid in trenches complete all as specified and directed by Engineer-in-Charge.

Supply & fix CI floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 1:2:4, 75mm dia. complete all as specified and directed by Engineer-in-Charge.

Supply & fix CI bends (any radius), disminishing pieces or tappers(larger bore measures), sockets 100mm dia with access door complete all as specified and directed by Engineer-in-Charge.

Supply & fix CI bends (any radius), disminishing pieces or tappers(larger bore measures), sockets 75mm dia with access door complete all as specified and directed by Engineer-in-Charge.

Supply & fix CI branch pieces ,double (equal or unequal ) ordinary or inverted (spigot or socket type) or with parallel branches 100 mm dia complete all as specified and directed by Engineer-in-Charge.

Supply & fix CI cowls 75mm dia complete all as specified and directed by Engineer-in-Charge.

Supply & fix stack clamp out of 50mm x5mm flat iron stays including bolt and nuts and securing ends of stays to walls or roof for 75mm bore piece complete all as specified and directed by Engineer-in-Charge.

Supply & fix 500 ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer white in colour hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed by Engineer-in-Charge.

Supply & fix 20 mm bore brass valve high pressure with polythene float and fly nuts complete screwed for iron pipe complete all as specified and directed by Engineer-in-Charge.

Supply & fix 20mm gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

Supply & fix mild steel framed work such as grills, gratings, tank staging etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors icl hinges and all necessary arrangement; ladder; framed balusters; railing;frame work for water tanks, cooler stand and similar work conforming to Fe 290 Gd E-165 complete all as specified and directed by Engineer-in-Charge.

Material and labour for 15 mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings ie. elbow, T, socket, reducer, union etc and fixed complete to walls and or laid under floors etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 20 mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings ie. elbow, T, socket, reducer, union etc and fixed complete to walls and or laid under floors etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 25-32mm bore cutting existing steel tubing for alteration or addition (Each cut to be measured seperately) complete all as specified and directed by Engineer-in-Charge.

Supply & fix bib tap, cast copper alloy chromium plated with crutch or butterfly handle chromium plated screwed down screwed for iron pipe or brass ferrule, fancy type, CP, 15mm dia complete all as specified and directed by Engineer-in-Charge.

Supply & fix 15 mm bore angle valve / stop valve cast copper alloy fancy type chromium plated screwed down, high pressure with crutch or butterfly handle , screwed both ends for iron pipe or for unions of 15mm dia complete all as specified and directed by Engineer-in-Charge.

Supply & fix vitreous china wash down water closet pan (pedestal pattern) white including trap bolts etc complete including connections to drain and plastic water closet seat cover closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinges device incl jet spray complete all as specified and directed by Engineer-in-Charge.

Supply & fix PVC flushing cistern,low level, white with inlet, ball valve ,complete including connection to pipe complete all as specified and directed by Engineer-in-Charge.

Supply & fix 32 mm bore waste coupling of PTMT (half or full threaded) (minimum weight 32mm- 45gms/40mm-60 gms)incl waste pipe complete all as specified and directed by Engineer-in-Charge.

Supply & fix 15mm bore PVC connection with PTMT nuts length 450 mm complete all as specified and directed by Engineer-in-Charge.

Supply & fix CP toilet paper holder fancy type complete all as specified and directed by Engineer-in-Charge.

Supply & fix chromium plated soap dish complete all as specified and directed by Engineer-in-Charge.

Supply & fix towel rail of cast copper alloy chromium plated fixed complete all as specified and directed by Engineer-in-Charge.

Supply & fix stainless steel peg set of 6 peg foldable or fixed complete all as specified and directed by Engineer-in-Charge.

Supply & fix counter shunk WHB complete all as specified and directed by Engineer-in-Charge.

Supply & fix central hole basin mixer for hot and cold water brass chromium plated screwed down with long sunk and fly nuts screwed for 15 mm dia complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparing newly plastered surfaces of ceilings and applying two coats of white wash complete all as specified and directed by Engr-in-Charge.

Material and labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of new wooden surface of any desccription over 10cm width or girth and applying two coat synthetic enamel paint over one coat of pink primer complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of new steel surface of any desccription over 10cm width or girth and applying two coat synthetic enamel paint over one coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes pier holes etc not exc. 10sqm on plan and not exc 1.5m in depth and getting out in hard/dense soil complete all as specified and directed by Engineer-in-Charge.

Material & labour for providing cement concrete 1:3:6 type C-2 bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for size 150 mm bore of pipe complete all as specified and directed by Engineer-in-Charge.

Material & labour for reinforced concrete pipes, 150mm bore, class NP-2 laid and jointed complete with collars complete all as specified and directed by Engineer-in-Charge.

Material & labour for rendering 15mm thick in cm 1:4 concrete walls or stone masonary walls surfaces as in wall finishes even and smooth w/o using extra cement incl mixing of wpc complete all as specified and directed by Engineer-in-Charge. (Note: WPC shall be measured and paid for seperately)

Material & labour for providing cement concete type B-1,1:2:4 mix (using 20 mm graded stone aggregates) as in copings including necessary use and waste of form work complete all as specified and directed by Engineer-in-Charge.

Material and labour for precasted RCC 1:2:4 type B1 using 20mm graded aggregates for precast cement conc slabs as in drain/ manhole covers set in cement mortar1:4 complete all as specified and directed by Engr-in-Charge. (Note : Slab covers shall be floated with surface vibrator,and over turfed base ,arrandement for turfed base has to be from contractors side)

Material and labour for extra for forming fair finished drain or channel 30cm inner girth in cement concrete ,using extra cement ,incl forms moulds ,mitered/stopped ends etc complete all as specified and directed by Engineer-in-Charge.

Supply only water proofing compound complete all as specified and directed by Engineer-in-Charge.

Cutting into existing manholes for connecting new drains of 150mm internal dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel ( ½ round or 3/4 Section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required. instruction complete all as specified and directed by Engineer-in-Charge.

Material and labour for salt glazed stoneware gully traps of size 150 mm x 150 mm, square or round mouthed, type ‘P’ complete all as specified and directed by Engineer-in-Charge.

Material and labour for point wiring complete with 1.5 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade ISI marked drawn through existing conduit including provn of 1.5 sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed as earth wire continuity with new plastic laminated white coloured top sheet cover 3.0 mm thick on existing sunken box complete all as specified and directed by Engineer-in-Charge for :-

One light point controlled by one, one way switch single pole piano type .

One fan point controlled by one, one way switch single pole piano type.

One 3 pin 5 Amp socket outlet on the same board.

All as per item No 90 here-in-before but with 2.5 Sqmm Copper conductor cable for one 3 pin, 16 Amps socket out let on independent board complete all as specified and directed by Engineer-in-Charge.

Material & labour for sub main wiring with two runs of PVC insulated and unsheathed FRLSH cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 2.5 Sqmm single core, copper conductor drawn through and including PVC conduit ISI marked with accessories and 2.5 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and directed by Engr-in-Charge.(Note: Two runs of conductor with one run of earth wire and PVC conduit will be measured & paid as one unit).

Supply & fix in replacement of isolators, MCBs, etc. In distribution board of the following rating and capacities complete all as specified and directed by Engineer-in-Charge.

MCB SPN of 240 volts 20/32/40 Amps Capacity, 'C' series, 10 KA

MCB SP of 240 volts 5-40 Amps Capacity, 'C' series, 10 KA

Supply & fix in replacement of Ceiling rose 3 phase, PVC/ Polycarbonate body complete all as specified and directed by Engineer-in-charge.

Supply & fix modular plastic surface box of module 1/2 flush type ISI marked complete all as specified and directed by Engineer-in-charge.

Supply & fix modular plastic surface box of module 3 flush type ISI marked complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repairs wall mounted decorative ultra slim LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack instant start with uniform light distribution 20 W 4 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting complete all as specified and directed by Engineer-in-Charge.

Supply & fix modular white cover plate with frame of module 1 flush type ISI marked complete all as specified and directed by Engineer-in-charge.

Supply & fix modular white cover plate with frame of module 3 flush type ISI marked complete all as specified and directed by Engineer-in-charge.

Supply & fix modular blank plate module 1 complete all as specified and directed by Engineer-in-charge.

Supply & fix in replacement, modular switch flush type, 6 Amp. SP, one way ,1 module complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement modular socket outlet, 3 pin, 6 Amp, flush type 2 module complete all as specified and directed by Engr-in-Charge

Supply & fix in replacement modular swicth, 16 Amp flush type 1 module complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement modular socket outlet, 3 pin, 6/16 Amp flush type 2 module complete all as specified and directed by Engr-in-Charge.

Material and labour for earthing complete with galvanized steel pipe electrode 40 mm bore, medium grade, 2.5 mtr length buried directly and preferably vertically in ground (earth pit not less than 1.25 mtr deep below ground level) with top edge of the plate not less than 0.6 meters below normal ground level, connected with 20 mm dia GI pipe by means of reducer and clamped with CI checknuts through 4.0 mm GI earth lead passing from 15 mmGI pipe all as shown in electrical plate No 2 (duly protected with 20 mm dia light grade GI pipe upto 7.5 m from the earth plate) and connected to GI steel earth plate including charcoal, dust, common salt necessary excavation in soft/loose soil, returning filling in and removal of surplus soil to a distance not exceeding 50 m from the starting point, watering pipe 20 mm dia GI light grade treated with 1 No PGI funnel, pit of PCC 1:3:6 type C-1, RCC 1:2:4 type B-1 pit cover 75 mm thick reinforced with 6 mm dia bars @ 75 mm c/c both ways and with MS handle 12 mm dia complete connected to earth test point including testing complete all as specified and directed

Supply & fix distribution board made of sheet metal enclosures double door type (CRCA sheet) dust and vermin proof , SPN 4 way with 200 Amps rated copper bus bar 415 Volt with in-built MCCB 63 Amps, 16 KA, 1 no. of earth bar IP 43 protection fixing to wall complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement energy saving, evironment friendly, long life, corrosion resistent, impact proof, Mini LED building security light made up of pressure die cast housing with prismatic polycarbonate diffuser and individual LEDs with secondary optics and IP 65 protection with LED 25 W light source including material and labour for suitable bracket made of 20 mm dia light grade GI pipe & MS clamps complete with nuts and bolts and washers complete all as specified and directed by Engineer-in-Charge.

Ahmed B Khatri (BID ID -3138164)

Bhavik Construction (BID ID -3138206)