TWO YEARS MAINTENANCE CONTRACT FOR OFFICE BUILDINGS OUTSIDE PORT AREA (CIVIL WORK)

NAME OF WORK :- Two Years Maintenance Contract for Office buildings outside Port area (Civil Work)

Schedule- B (Bill of Quantities)

Item No. Description Total Qty. Amount

In Fig. In Words In Fig. In Words

PART - A (CIVIL WORK)

1 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas

(exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of

excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.

All kinds of soil Cubic

2 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not

exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m Cubic

and lift upto 1.5 m. Metre

3 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and Cubic

dressing complete. Metre

4 Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep Square

and disposal of rubbish, lead up to 50 m and lift up to 1.5 m Metre

5 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to

30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m 5000.00 10.15 Sq.m

outside the periphery of the area cleared.

6 Providing and laying in position cement concrete of specified grade excluding the cost of centering and

shuttering - All work up to plinth level

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Metre

(b) 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Cubic

7 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of

centering, shuttering, finishing and reinforcement - All work up to plinth level :

1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). Metre

8 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth

and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. above plinth level up to

floor five level, excluding cost of centering, shuttering, finishing and reinforcement :

1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). Metre

Item No. Description Total Qty. Amount

In Fig. In Words In Fig. In Words

9 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings,

balconies, shelves, chajjas, lintels,bands, plain window sills, staircases and spiral stair cases above plinth

level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 20.00 7503.51 cum

1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form for all heights :

Foundations, footings, bases of columns, etc. for mass concrete Metre

Lintels, beams, plinth beams, girders, bressumers and cantilevers Metre

Columns, Pillars, Piers, Abutments, Posts and Struts Metre

Suspended floors, roofs, landings, balconies and access platform Metre

Shelves (Cast in situ) Metre

11 Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding

all complete below plinth level. Thermo-Mechanically Treated bars of grade Fe-500D 2800.00 62.76 Kg Kilogram

12 Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding

all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D 3500.00 62.76 Kg Kilogram

13 Providing & laying cement concrete solid blocks 1:8:6 (machine made) confirming to relevant IS (Latest

Edition) masonry of 150 to 200 mm thick set in cement mortar 1:6 including loading, unloading,

transportation, curing etc. complete as directed.

14 Repairing of RCC columns of any size Upto height of 10m including removal & cleaning of detriorated

cement mortor/ concrete from damaged portion , dismantaling of existing masonry in widht of 0.30m,

cleaning , washing the surface, welding new reinforcement with existing reinforcement, applying bond coat,

recasting column with RCC M30 10cm thick to achieve original thickness of column, 20mm thick plaster in

CM 1:3, necessary labour, tools tackles, shuttering, scaffolding, all material complete as directed by

Engineer in charge. (Reinforcement will be paid extra).

Consider for 20 Columns = 20*0.3m*0.3m*1.0m ht.= 180.00 SQm Square

15 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and Cubic

plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) Metre

16 Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level,

including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate Cubic

20 mm nominal size) at window sills, ceiling level and the like. Cement mortar 1:6 (1 cement : 6 coarse 10.00 5792.99 Cum

Item No. Description Total Qty. Amount

In Fig. In Words In Fig. In Words

17 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a

floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. Square

complete. 40 mm thick with 20 mm nominal size stone aggregate Metre

18 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry

mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of Square

cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick Metre

19 Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut

for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved

shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints

treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing,

curing,moulding and polishing to edges to give high gloss finish etc. complete at all levels. Raj Nagar Plain

white marble/ Udaipur green marble/ Zebra black marbleGranite of any colour and shade.

Area of slab upto 0.50 sqm Metre

Area of slab over 0.50 sqm Metre

20 Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work),

backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand),

including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of

pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid

for separately). Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble.

Area of slab upto 0.50 sqm Metre

Area of slab over 0.50 sqm Metre

12 mm cement plaster of mix in coarse sand: 1:4 (1 cement: 4 coarse sand) Metre

22 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand)

finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand). 500.00 309.93 Sqm

Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including

cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase 10.00 327.88 Each Each

with matching concrete, plastering and painting the exposed portion of the clamps complete.

24 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth Square

including necessary repairs to scratches etc. complete. Metre

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering 12000.00 14.60 Sqm

and preparing the surface smooth including necessary repairs to scratches etc. complete. Metre

26 White washing with lime to give an even shade : Old work (two or more coats) Square

Item No. Description Total Qty. Amount

In Fig. In Words In Fig. In Words

27 Distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade Square

on new work, over and including water thinnable priming coat to give an even shade. 1000.00 113.79 Sqm

28 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Square

Water thinnable cement primer Metre

29 Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied

@ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm). 2000.00 116.80 Sqm

30 Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @

ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture Square

31 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and

manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 5000.00 86.70 Sqm

32 Applying priming coat:

(a) With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft Square

(b) With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised Square

iron/ steel works Metre

33 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or Square

more coats on new work Metre

34 Lettering with black Japan/ Synthetic enamel/ floor enamel/ enamel paint of approved brand and

manufacture as directed by engineering incharge.

5000.00 3.54 per letter per letter

35 Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required Square

shade on old work to give an even shade. 4000.00 39.76 Sqm

36 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : One Square

or more coats on old work Metre

37 Finishing walls with Acrylic Smooth exterior paint of required shade: Old work (Two or more coat applied @

1.67 ltr/ 10 sqm) on existing cement paint surface 4000.00 78.12 Sqm

38 Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with

coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water

disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning

on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per

direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint 160000.00 0.28 litre Litre

remover or black paint and if date is not written with the stencil or old date is not removed deduction will be

made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by

contractor at his own cost and nothing extra will be paid on this account)

Item No. Description Total Qty. Amount

In Fig. In Words In Fig. In Words

39 Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the

patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based Square

polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Metre

Engineer-In Charge.

40 Cleaning of under ground sump, Over Head R.C.C. Tank (independent staging) including disposal of slit

and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:-

Tank shall be emptied of water by pumping & bottom shall be cleaned of slit and other deposits. (ii) Entire

surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with

water. (iii) Chlorination of RCC internal surface by liquid chlorine. (iv) The treated surface shall be dried Square

using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be 3825.00 49.91 Sqm

treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.

15 Nos of apprx. Tank of Size 2.5mx5mx2m ht per 4 months = 6*15*((2*2.5*2)+(2*5*2)+(2.5*5)) =

41 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S

trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device

(handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making 10.00 4046.95 Each Each

good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440

mm with integral type foot rests.

42 Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door

shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete 20.00 228.17 Each Each

as per the direction of the Engineer-in-charge

43 Demolishing cement concrete manually/ by mechanical means including disposal of material within

metres lead as per direction of Engineer - in - charge

Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of Cubic

unserviceable material within 50 metres lead as per direction of Engineer - in- charge. Metre

45 Demolishing brick work / block work manually/ by mechanical means including stacking of serviceable

material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Cubic

charge. In cement mortar Metre

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, 15.00 211.89 Each Each

holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below

47 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within

metres lead : Of area 3 sq. metres and below 15.00 82.81 Each Each

48 Dismantling steel work manually/ by mechanical means in built up sections without dismembering and

2000.00 2.24 Kg Kilogram

stacking within 50 metres lead as per direction of Engineer-in charge

49 Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within

metres lead of:

Item No. Description Total Qty. Amount

In Fig. In Words In Fig. In Words

G.S Sheet Metre

50 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per Square

directions of Engineer-in- Charge. Metre

51 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and

lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device

(handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making

5.00 3878.39 Each Each

good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

52 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC

automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and

clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings

in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever 10.00 7089.81 Each Each

required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern

53 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever)

conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White 20.00 716.14 Each Each

54 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved

quality and make, including painting of fittings and brackets, cutting and making good the walls wherever

required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin 10.00 2421.34 Each Each

55 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to

Eureopean type W.C. of quality and make as approved by Engineer - in -charge. 20.00 209.55 Each Each

56 Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat

20.00 410.59 Each Each

57 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

150.00 73.05 Each Each

Flexible pipe 32 mm Dia.

58 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic

moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 10.00 811.27 Each Each

59 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent

arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm 6.00 1122.87 Each Each

outlet. Sand cast iron S&S as per IS:

60 Providing & fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow

technology. 15 mm nominal bore 5.00 5635.35 Each Each

Item No. Description Total Qty. Amount

In Fig. In Words In Fig. In Words

61 Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2" BSP thread and shapes,

weighing not less than 60 gms 100.00 64.93 Each Each

62 Providing and fixing PTMT urinal cock of approved quality and colour. 15 mm nominal bore, 80 mm long,

mm high and 30mm wide with BSP female threads weighing not less than 48 gms 100.00 104.97 Each Each

63 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of

cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :

(a) 50.00 567.81 metre Metre

250 mm dia. R.C.C. pipe

(b) 300 mm dia. R.C.C. pipe 100.00 631.44 metre Metre

64 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab

with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation

concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside

plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat

cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard 100.00 8180.97 Each Each

design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm

internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and

weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation

65 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold

water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at

m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints

complete as per direction of Engineer in Charge.

(a) Internal work Exposed on wall

i 15 mm nominal outer dia Pipes 100.00 179.13 metre Metre

ii 20 mm nominal outer dia Pipes 100.00 227.57 metre Metre

iii 25 mm nominal outer dia Pipes 100.00 285.99 metre Metre

iv 32 mm nominal outer dia Pipes 100.00 350.67 metre Metre

(b) Concealed work, including cutting chases and making good the walls etc.

i 15 mm nominal outer dia Pipes 100.00 308.81 metre Metre

ii 20 mm nominal outer dia Pipes 100.00 359.63 metre Metre

iii 25 mm nominal outer dia Pipes 100.00 438.24 metre Metre

iv 32 mm nominal outer dia Pipes 100.00 498.93 metre Metre

66 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold

water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with

one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer

in Charge. External Work

i 15 mm nominal outer dia Pipes 50.00 154.95 metre Metre

ii 20 mm nominal outer dia Pipes 50.00 192.68 metre Metre

iii 25 mm nominal outer dia Pipes 50.00 259.46 metre Metre

iv 32 mm nominal outer dia Pipes 50.00 304.54 metre Metre

v 50 mm nominal outer dia Pipes 50.00 568.30 metre Metre

Item No. Description Total Qty. Amount

In Fig. In Words In Fig. In Words

67 Providing and fixing brass bib cock of approved quality : 15 mm nominal bore 20.00 212.70 Each Each

68 Providing and fixing brass Stopcock of approved quality : 15 mm nominal bore 20.00 212.70 Each Each

69 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

(a) 25 mm nominal bore 10.00 372.65 Each Each

(b) 20 mm nominal bore 10.00 323.23 Each Each

(c ) 32 mm nominal bore 10.00 412.93 Each Each

70 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete

(a) 15 mm nominal bore 10.00 244.20 Each Each

(b) 20 mm nominal bore 10.00 278.22 Each Each

(c ) 25mm nominal bore 20.00 279.41 Each Each

71 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked,

with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes 15000.00 6.79 Per Litre Per Litre

but without fittings and the base support for tank.

20.00 303.94 Each Each

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal Bore

73 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make 20.00 416.33 Each Each

conforming to IS:8931. 15 mm nominal bore

74 Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 122mm long, 100.00 100.31 Each Each

weighing not less than 99 gms

75 Providing and fixing PTMT stop cock of approved quality and colour. 15 mm nominal bore, 86 mm long,

100.00 72.21 Each Each

weighing not less than 88 gms

76 Providing and fixing PTMT pillar cock of approved quality and colour. 15 mm nominal bore, 125 mm long

100.00 135.91 Each Each

foam flow, weighing not less than 120 gms

Providing high impact Polypropylene reinforced cement 6 mm thick corrugated sheets (as per IS: 14871)

roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia.G.I. plain and Square

bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of Metre

purlins, rafters and trusses), including cutting sheets to size and shape wherever require

78 Providing and fixing ridges and hips in fibre cement high impact polypropylene reinforced roofing with

suitable fixing accessories or self drilling fastener and EPDM washer etc. complete. Corrugated serrated 50.00 311.33 metre Metre

adjustable ridges

Item No. Description Total Qty. Amount

In Fig. In Words In Fig. In Words

79 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special

sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side

inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of

27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm

dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of

required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I.

channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section

0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at

mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting

clips made out of 2.64 mm dia x 230 mm long G.I.wire at every junction, including fixing perimeter channels

0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to

wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm

interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall

screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and

square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing

compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer

suitable for board, all as per manufacturer's specification and also including the cost of making openings for

light fittings, grills,diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as

per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :

Fully Perforated Gypsum Plaster Board of size 1200 x2400x12.5 mm having approx. 15 % perforated area Square

with perforation size and pattern as approved by the Engineer-in-charge and as per manufacturer's Metre

specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick

water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen

primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C,

0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid

using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and Square

chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse Metre

direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N.

Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in

accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised

applicator of the manufacturer of membrane : 3 mm thick

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed

and fixed in position with hold fast lugs or

with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately)

(a) Second class teak wood Cubic

82 Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type, core of

block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with Square

vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked 100.00 2160.27 sqm

Stainless Steel butt hinges with necessary screws.

83 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete

a 125x64x1.90 mm 50.00 66.85 Each Each

b 100X58X1.90 mm 50.00 60.31 Each Each

Item No. Description Total Qty. Amount

In Fig. In Words In Fig. In Words

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :

a 250x10 mm 50.00 262.05 Each Each

b 200x10 mm 50.00 210.39 Each Each

50.00 191.24 Each Each

Providing and fixing bright finished brass door latch with necessary screws etc. complete : 300x16x5 mm

86 Providing and fixing bright finished brass handles with screws etc.complete: 125 mm 50.00 143.57 Each Each

87 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo

with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with 30.00 717.96 Each Each

necessary accessories and screws etc.

88 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever

handles of approved quality with necessary screws etc. complete. 15.00 572.25 Each Each

89 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up

standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS:

733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps

at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium

sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including

cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete

as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash

fasteners to be paid for separately) :

(a) For fixed portion. Powder coated aluminium (minimum thickness of

400.00 326.41 kg Kilogram

powder coating 50 micron)

(b) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making

provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket

200.00 395.36 kg Kilogram

required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder

coating 50 micron)

90 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood

particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows

shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural

drawings and directions of Engineer-in-charge.

(a) Pre-laminated particle board with decorative lamination Square

on both sides Metre

91 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM

rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-

charge . (Cost of aluminium snap beading shall be paid in basic item):

(a) With float glass panes of 5.50 mm thickness Square

(b) With float glass panes of 8 mm thickness Square

92 Structural steel work riveted, bolted or welded in built up sections,trusses and framed work, including

5000.00 78.37 kg Kilogram

cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete

Item No. Description Total Qty. Amount

In Fig. In Words In Fig. In Words

93 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked

together through their entire length and jointed together at the end by end locks, mounted on specially

designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push

and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs

manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top

cover of required thickness for rolling shutters.

(a) 80x1.25 mm M.S. laths with 1.25 mm thick top cover

(b) Extra for providing mechanical device chain and crank operation for operating rolling shutters. Exceeding 776.09 Square

16.80 sqm in area Metre

94 Providing & fixing 6mm thick multiwall poly carbonate sheet of required shape and shade complete with cost

of nuts, bolts, washers, alluminium wind tie etc. filling of gap of sheets at joint of sheets with silicon. The Square

work also comprises of fixing of alluminium jingles at bothsides of sheets as directed by Engineer-In- Metre

95 Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade

made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in Square

required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints 600.00 665.70 Sqm

with line sand etc. all complete as per the direction of Engineer-in-charge.

96 Providing and laying full body Vitrified tiles in floors, Skirting, riser, dedo with different sizes (minimum

thickness of 10mm), with water absorption less than 0.08% and conforming to IS:15622, of approved brand

& manufacturer,in all colours and shade, laid with cement based high polymer modified quick set tile

adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints of 600.00 1,029.00 Sqm

3 mm width using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener

and 0.20 kg of resin per kg),with epoxy grout material, upto floor four lavel complete as per direction of

Engineer-in-charge.

97 Providing, laying & jointing uPVC pipes of required working pressure as per I.S.I. including cutting and

jointing the pipe ends as per manufacturer's instructions including the cost of all the specials plain & brass

threaded fittings wherever required and, excavation and refilling of the trenches or fixing on walls or similar

structures with clamps and testing the joints etc., complete as directed.

(a) 15 mm dia. Running

20 mm dia. Metre

25mm dia. Metre

32mm dia. Metre

98 Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing

with polymer coated 'J' or 'L'hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding

the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs

incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot 250.00 733.95 Sq.m

cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS

10192 and IS 12866.The sheets shall be opaque or translucent,clear or pigmented, textured or smooth as

specified. 2 mm thick flat

Item No. Description Total Qty. Amount

In Fig. In Words In Fig. In Words

99 Repairing , Rewinding, Servicing of monoblock/ submercible water pumps various capacity including

removing and Refixing and replacement of all the required spare parts i.e. mortar winding, capaciter,

bearing etc. complete as directed by Engineer-In-Charge.

(a) 0.5 HP to 2 HP Capacity 10.00 3,300.00 Each Each

(b) 3 to 5HP Capacity 10.00 4,500.00 Each Each

100 Supplying & fixing of monoblock motor pump of different capacity of approved quality with necessary fittings,

making electrical connections, testing etc. complete as directed by the Engineer In-charge

(a) 0.5 HP Capacity 4.00 6,000.00 Each Each

(b) 1 HP Capacity 6.00 10,000.00 Each Each

(c ) 3 HP Capacity 2.00 13,000.00 Each Each

(d) 5 HP Capacity 1.00 18,000.00 Each Each

101 Providing & fixing SWR PVC (I.S.I - IS 13592) waste or vent pipe including necessary specials such as

Tees, Bends, Y's Plinth offsets, Shoes , Vent cowl etc. with bracket , screws on wooden plugs fixed on wall

face including filling joints with solution & cement mortar 1:2 complete as directed.

75 mm dia. (Outer Dia)

110 mm dia. (OD)

102 Supplying & fixing the following fixtures of Stainless Steel of approved quality to the doors, windows,

ventilators etc. complete as directed by Engineer-in-Charge.

(a) Handle 100 mm size. 30.00 250.00 Each Each

(b) Aldrop 300 x 16 mm size 30.00 650.00 Each Each

(c ) Mortice Lock (handle) 20.00 1,100.00 Each Each

103 Operating of various capacity water pumps for pumping of fresh water from under ground water tanks to

overhead water tanks at various location of office buildings including operating of valves by deputing

operator with necessary Tranportation Vehicle and communication means etc as directed by Engineer-In- 730.00 1,280.00 Per Days Per Day

104 Deployment of Tractor with tractor trolly including labours for removing of solid waste/ Garbage/ Debrish

material and disposing the same outside of cargo jetty area. The rates are including tractor trolly and 200.00 670.00 Trip Trip

labours, loading, unloading & lead upto 3 Km out side cargo jetty area.

105 Providing and fixing louvers Roller blinds (curtains) for windows made up of of approved make and color

with guide channel & chain with pull & push arrangement including cost of brackets, screws, palmet etc. Square

with all labour, materials complete as directed by Engineer-In-Charge. Metre

106 Providing and fixing the system for ornamental elevation made up of Aluminium Composite Panels with

3.25mm thickness with ‘3M’ brand PVDF coated two way tape to fix the ACP with required aluminium

Framed structure - made out of 1.2mm thick aluminium channels/Box section of weight not less than 2 Square

kg/Length - fixed rigidly with the existing wall using suitable fasteners and neatly finishing the joints by the Metre

process of DOW corning using all weather sealant of grade ‘995’ silicon including finishing sharp edges,

M.S. structure framing, cutting, fixing, etc. complete with all labour and material as directed.

107 Providing and fixing of glass clading with the 5mm saint gobain (or equivalent) saphire blue glass/ or colour

glass, 2(1/2)" x 1 (1/2)" pipe (38mm x 63mm of 2.0 mm thickness) , powder coating & colour anodizing with Square

required necessary fixtures like measure tape, alluminium stud, abro tape etc. complete with all labour and Metre

Item No. Description Total Qty. Amount

In Fig. In Words In Fig. In Words

108 Providing cement based water proofing layer on Terrace over IPS flooring/Concrete, in required slope to

drain the water for any span after cleaning the base surface and providing with average 25 mm thick layers

of C.M.1:3 added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry

admixed with approved water proofing compound. Making the junctions at the parapet rounded and tapered Square

top for required height, with drip mould at the junction of plaster and parapet. including Providing & Laying Metre

tile small pieces in mosaic pattern ( China Mosaic Tile Flooring ) on top layer of waterproofing treatment,

over cement slurry, to desired slope, including conveying, lifting of material, curing, labour etc complete as

directed by Engineer in Charge

I/ We am/are willing to carry out this work at ________% below The tendered rates mentioned I/ We am/are willing to carry out this work at ________% above The

above amount of my/our tender are put as under:- tendered rates mentioned above amount of my/our tender are put as

(percentage should be written in figure and words)

Estimated amount put to tender Rs._________________ Estimated amount put to tender Rs._________________