Loading
Loading…
Loading…
Tender Value
₹9.9 Cr
EMD Value
₹19.7 L
Closing Date
14 Aug 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
EAST TENDE
17 conditions · 4 needing a document upload
Financial Eligibility Criteria: as per Clause 10.2 of Part-I of IRSGCC-2022 and as per Railway Board Advance correction slip No.1 dated 14-07-2022 The tenderer must have minimum average annual contractual turnover of V/N or "V" which ever is less: where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-F (Annexure-VIB of GCC), along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet
Financial Eligibility Criteria: As per Clause 10.2 of IRSGCC-2022 (As per Advanced Correction slip No,1 dated. 14.07.2022 to GCC-2022) and the same is mentioned in para no.10.2 page no. 15 of this tender document. Tenderer should attach Self-attested/ Digitally signed copy of Certificate showing minimum average annual contractual turnover as per Annexure VIB of IRSGCC-2022 (As per Advanced Correction slip No,1 dated. 14.07.2022 to GCC-2022) in Annexure - "F"Page-32 of Master Document - 1 attached to the tender
Similar Nature of Work : " "C-2 : Any Civil Engineering Works (excluding Track works/Zonal works)" (as per HQrs letter No. W.148/P/SNW/2025 dated. 02.12.2025, with the Approval of PCE/SCR)
Technical Eligibility Criteria: as per Clause 10.1 of Part-I of IRSGCC-2022 (a) The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tende
(b) (1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfilment of technical eligibility criteria for different components. (b)(2) In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the 1.1.1 Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway. In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract, with prior approval of Chief Engineer in writing
Note for Item 10.1 of IRSGCC-2022: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organization, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work 1.1.2 experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate
17 conditions · 5 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tender value is including escalation of (-)15% (minus fifteen percent ) on CPWD DSR rates. Tenderer should note this before quoting the rates.
The original Bank Guarantee (in lieu of Bid Security) should be delivered in person to the official nominated (i.e. OS/Tenders/Engg)/BZA Division) as indicated in the tender document before closing date for submission of bids (i.e. excluding the last date of submission of Bids).
All the instructions furnished in the Technical Compliance / Commercial Compliance / Custom / Undertakings / General Instructions are only indicative and not exhaustive. The tenderer shall read the GCC / Tender documents for complete details.
The tenderer shall thoroughly go through the entire tender document and strictly adhere to the instruction and directions given therein
SW I: Proposal for Construction of New running room with air conditioning along with kitchen at BZA-100 bed capacity. SW II: BZA- Proposed construction of Type-V quarters (4 units) at G.Pet section.
E-21-EAST-BZA-2026
E-21-EAST-BZA-2026
Open
Works - General
18 Months
Krishna, Andhra Pradesh
₹0
₹19.7 L
14 Aug 2026
22 Jul 2026
31 Jul 2026
122 items across 3 schedules · ₹11,52,88,023.97 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil | cum | 1809 | 177.5 | 3,21,097.5 |
| 2 | Depth exceeding 1.5 m but not exceeding 3 m | Sqm | 750 | 54.95 | 41,212.5 |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. | cum | 1189.85 | 196 | 2,33,210.6 |
| 4 | All kinds of soil | cum | 565.38 | 126.8 | 71,690.18 |
| 5 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | cum | 151.09 | 2,123.75 | 3,20,877.39 |
| 6 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. | Sqm | 3920 | 17.6 | 68,992 |
| 7 | Chlorpyriphos/ Lindane emulsifiable concentrate of 20% | Litre | 225 | 234.75 | 52,818.75 |
| 8 | With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration | Metre | 100 | 38.9 | 3,890 |
| 9 | 1:3:6 (1 Cement : 3 coarse sand (zone- III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) | cum | 137.59 | 7,178.75 | 9,87,724.21 |
| 10 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources). | Sqm | 1661.38 | 495.75 | 8,23,629.14 |
| 11 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. | per bag of 50 kg cement used | 531.64 | 18.15 | 9,649.27 |
| 12 | cum | 13.73 | 12,205.85 | 1,67,586.32 | |
| 13 | cum | 12 | 11,454.35 | 1,37,452.2 | |
| 14 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 1073.66 | 392.15 | 4,21,035.77 |
| 15 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 4568.72 | 927.25 | 42,36,345.62 |
| 16 | Lintels, beams, plinth beams, girders, bressummers and cantilevers | Sqm | 915.18 | 736.4 | 6,73,938.55 |
| 17 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 2832 | 961.3 | 27,22,401.6 |
| 18 | Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards | Sqm | 240 | 1,296.7 | 3,11,208 |
| 19 | Under 20 cm wide | Metre | 1354.4 | 208.55 | 2,82,460.12 |
| 20 | Weather shade, Chajjas, corbels etc., including edges | Sqm | 120 | 951.1 | 1,14,132 |
| 21 | Providing, transporting, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in vertical & horizontal fins, individually or forming box louvers, setting in cement mortar 1:2 (1 cement : 2 coarse sand), including the cost of required centering, shuttering but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | cum | 18.8 | 12,043.35 | 2,26,414.98 |
| 22 | Concrete of M30 grade with minimum cement content of 350 kg /cum | cum | 481.57 | 9,655.7 | 46,49,895.45 |
| 23 | Concrete of M30 grade with minimum cement content of 350 kg /cum | cum | 1634.36 | 10,011.35 | 1,63,62,149.99 |
| 24 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum | 85.72 | 7,370.65 | 6,31,812.12 |
| 25 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 1767.61 | 9,105.95 | 1,60,95,768.28 |
| 26 | Area of slab over 0.50 sqm | Sqm | 364.08 | 5,136.3 | 18,70,024.1 |
| 27 | Granite work | Metre | 718 | 510.95 | 3,66,862.1 |
| 28 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 804.3 | 1,267.95 | 10,19,812.19 |
| 29 | Second class teak wood | cum | 2.03 | 1,42,949.7 | 2,90,187.89 |
| 30 | 30 mm thick shutters | Sqm | 84 | 3,747.3 | 3,14,773.2 |
| 31 | Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked | Sqm | 84 | 1,693 | 1,42,212 |
| 32 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 126 | 2,172.1 | 2,73,684.6 |
| 33 | On one side only | Sqm | 126 | 478 | 60,228 |
| 34 | 125x65x2.12 mm | Each | 224 | 55.75 | 12,488 |
| 35 | 300x16 mm | Each | 112 | 216.55 | 24,253.6 |
| 36 | 250x10 mm | Each | 112 | 83.9 | 9,396.8 |
| 37 | 125 mm | Each | 112 | 39.95 | 4,474.4 |
| 38 | 125x85x5.5 mm (heavy type) | Each | 270 | 268.65 | 72,535.5 |
| 39 | 250x10 mm | Each | 180 | 441.6 | 79,488 |
| 40 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. | Each | 90 | 854.65 | 76,918.5 |
| 41 | 125 mm | Each | 180 | 256.65 | 46,197 |
| 42 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. | Each | 90 | 1,124.85 | 1,01,236.5 |
| 43 | Second class teak wood | Sqm | 126 | 4,692.1 | 5,91,204.6 |
| 44 | Using R3 series with frame (98 mm & above) x (40 mm & above) & both glazed and fly screen sash (30 mm & above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi- point locking system. (Height upto 1.8m) | Sqm | 282.24 | 10,874.2 | 30,69,134.21 |
| 45 | Providing and fixing cupboard shutter with 19 mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2 mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer- in-charge.(Payment of providing and fixing auto closing hinges shall be paid separately) | Sqm | 24 | 2,829.25 | 67,902 |
| 46 | Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-in-charge. (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately) | Kg | 100 | 533.25 | 53,325 |
| 47 | Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides | Sqm | 92.4 | 844.7 | 78,050.28 |
| 48 | Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides | Sqm | 15.36 | 1,133.55 | 17,411.33 |
| 49 | 4.0 mm thick glass panes | Sqm | 225.6 | 1,064.65 | 2,40,185.04 |
| 50 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In- charge. | Kg | 480 | 130.5 | 62,640 |
| 51 | Light shade pigment using white cement | Sqm | 895 | 1,402 | 12,54,790 |
| 52 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. | Sqm | 154.5 | 1,096.55 | 1,69,416.98 |
| 53 | Size of Tile 600x600 mm | Sqm | 354.8 | 1,553.45 | 5,51,164.06 |
| 54 | Size of Tile 1000x1000 mm | Sqm | 1020 | 2,089.65 | 21,31,443 |
| 55 | Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. | Sqm | 108 | 3,186.7 | 3,44,163.6 |
| 56 | 110 mm diameter | Metre | 725 | 377.4 | 2,73,615 |
| 57 | 110x110x110 mm | Each | 200 | 234.15 | 46,830 |
| 58 | 110 mm bend | Each | 199 | 150.35 | 29,919.65 |
| 59 | 110 mm Shoe | Each | 150 | 131.85 | 19,777.5 |
| 60 | 12.5 mm thick tapered edge gypsum moisture resistant board | Sqm | 800 | 1,529.1 | 12,23,280 |
| 61 | GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. | Sqm | 160 | 1,902.95 | 3,04,472 |
| 62 | 1:4 (1 cement: 4 fine sand) | Sqm | 805.62 | 347.05 | 2,79,590.42 |
| 63 | 1:6 (1 cement: 6 fine sand) | Sqm | 19422.26 | 333.35 | 64,74,410.37 |
| 64 | New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. | Sqm | 6194.24 | 181.25 | 11,22,706 |
| 65 | Two or more coats on new work | Sqm | 282.6 | 155.9 | 44,057.34 |
| 66 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | Sqm | 19422.26 | 156.05 | 30,30,843.67 |
| 67 | Two coats | Sqm | 13228.02 | 137.45 | 18,18,191.35 |
| 68 | With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre | Sqm | 13228.02 | 73.95 | 9,78,212.08 |
| 69 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) | cum | 315 | 2,434.25 | 7,66,788.75 |
| 70 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | cum | 29 | 3,551.25 | 1,02,986.25 |
| 71 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | cum | 344 | 263.95 | 90,798.8 |
| 72 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 50 | 8,006.6 | 4,00,330 |
| 73 | White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap | Each | 66 | 2,226.35 | 1,46,939.1 |
| 74 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. | Each | 66 | 1,683.35 | 1,11,101.1 |
| 75 | 610x510 mm bowl depth 200 mm | Each | 19 | 4,940.8 | 93,875.2 |
| 76 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality and make as approved by Engineer in charge.(a) 15 mm nominal dia | Each | 16 | 6,940.75 | 1,11,052 |
| 77 | 32 mm dia | Each | 120 | 103.9 | 12,468 |
| 78 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | Each | 66 | 1,607.95 | 1,06,124.7 |
| 79 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. | Each | 66 | 168.35 | 11,111.1 |
| 80 | 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms | Each | 54 | 673.4 | 36,363.6 |
| 81 | Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer- in-charge. | Each | 50 | 7,979.2 | 3,98,960 |
| 82 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in- Charge. | Each | 16 | 18,212.9 | 2,91,406.4 |
| 83 | 50 mm nominal dia Pipes | Metre | 130 | 934.15 | 1,21,439.5 |
| 84 | 20 mm nominal dia Pipes | Metre | 155 | 537.6 | 83,328 |
| 85 | 25 mm nominal dia Pipes | Metre | 455 | 627.25 | 2,85,398.75 |
| 86 | 25 mm nominal bore | Each | 9 | 622.4 | 5,601.6 |
| 87 | 50 mm nominal bore | Each | 9 | 1,026.65 | 9,239.85 |
| 88 | 20 mm nominal bore | Each | 8 | 462.5 | 3,700 |
| 89 | 150 mm diameter | Each | 56 | 222.35 | 12,451.6 |
| 90 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Per Litre | 5000 | 11 | 55,000 |
| 91 | 15 mm nominal bore | Each | 96 | 798.95 | 76,699.2 |
| 92 | 15mm nominal bore | Each | 66 | 574.3 | 37,903.8 |
| 93 | 150 mm nominal size square 100 mm diameter of the inner hinged round grating | Each | 96 | 196.95 | 18,907.2 |
| 94 | 15 mm nominal bore with 45 cm length | Each | 100 | 121.9 | 12,190 |
| 95 | 150 mm diameter S.W. pipe | Metre | 209 | 743.1 | 1,55,307.9 |
| 96 | Circular shape 560 mm internal diameter | Each | 26 | 1,675.7 | 43,568.2 |
| 97 | 400 mm dia piles | Metre | 210 | 2,767 | 5,81,070 |
| 98 | Anodized (AC 15 ) aluminium | Each | 8 | 107.9 | 863.2 |
| 99 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc. to paid separately) | Sqm | 156 | 5,325.9 | 8,30,840.4 |
| 100 | Frame size 50 x 125 mm | Metre | 282.4 | 1,075.7 | 3,03,777.68 |
| 101 | 30 mm thick | Sqm | 104.4 | 4,346.7 | 4,53,795.48 |
| Schedule total | ₹8,47,80,287.76 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
MasterDocument-01.pdf
ATTACHMENT
MasterDocument-02.pdf
ATTACHMENT
tenderschedule.pdf
ATTACHMENT
generalconditions.pdf
ATTACHMENT
1SPECIALCONDITIONSFORBUILDINGWORKS..pdf
ATTACHMENT
safetytrackconditions.pdf
ATTACHMENT
specficationofconcrete.pdf
ATTACHMENT
HQrs LETTER ON
ATTACHMENT
626.02.2026_RevisedApprovedlistofBrandsandMakes2026withallenclosures.pdf
ATTACHMENT
9Steelspecialconditions.pdf
ATTACHMENT
9TrDSpl.Conditions.pdf
ATTACHMENT
7DESIGNMIXHQrsLETTERONSPECIALCONDITIONSFORDESIGNMIX2123-03-2022.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .