Material Supply for MGNREGS Works of Mannur GP

Amount

Material Supply Items

COARSE SAND (ZONE III)

PORTLAND CEMENT

SOLID BLOCK OF SIZE 30X20X15 CM

STONE AGGREGATE (SINGLE SIZE):10 MM NOMINAL SIZE

STONE AGGREGATE (SINGLE SIZE):20 MM NOMINAL SIZE

STONE AGGREGATE (SINGLE SIZE):40 MM NOMINAL SIZE

BITUMEN WASHER

GALVANISED STEEL BOLT AND NUTS 6 MM DIA AND 25 MM LONG ROUND HEAD WITH SLOTS

GALVANIZES STEEL J OR L HOOKS 8 MM DIA

GI LIMPET WASHER THICK

FINE SAND( ZONE IV)

GI PIPE 40 MM DIA

GI PIPE 50 MM DIA

RED OXIDE ZINC CHROMATE PRIMER

STONE FOR MASONRY

WELDING BY ELECTRIC PLANT

GI TRAFFORD PROFILE SHEET 0.35 MM THICK

STRUCTURAL STEEL SUCH AS TEES,ANGLES,CHANNELS AND RS JOISTS

100 mm CHANNEL SHOULDER 2.5 M LONG

15 MM C.P. BRASS TAP

ADJUSTABLE TELESCOPIC PROP 3 M (2.02-3.75M)

BEAM CLAMP 300-380 MM (450-1070 MM )

BLACK COLOUR DARK SHADE PIGMENT

BLACK PLASTIC SEAT (SOLID) WITH LID C.P. BRASS HINGES AND RUBBER BUFFERS

CERAMIC GLAZED TILES 1 ST QUALITY MINIMUM THICKNESS 5 MM IN ALL COLOURS SHADES AND DESIGNS EXCEPT BURGUNDY, BOTTLE GREEN BLACK

C.I. BRACKET FOR WASH BASIN AND SINKS

C.P. BRASS WASTE 32 MM

BRIGHT FINISHED OR BLACK ENAMELED MILD STEEL BUTT HINGES 100X58X1.90 MM

CORNER ANGLE 45X45X5 MM 1.50 M LONG

DOUBLE CLIP (BRIDGE CLIP)

FLUSHING CISTERN P.V.C. 10 ITS CAPASITY (LOW LEVEL) (WHITE) (WITH FITTINGS, ACCESSORIES AND FLUSH PIPE)

FLATS UP TO 10 MM IN THICKNESS

HIRE CHARGES OF CONCRETE MIXER 0.25 TO 0.40 CUM WITH HOPPER

MS TUBE 40 MM DIA

MACHINE MOULDED PERFORATED COMMON BURNT CLAY FPS (NON MODULAR) BRICKS OF CLASS DESIGNATION 12.5

PLASTIC EMULSION PAINT

MATERIAL - 75 MM VALVE

MILD STEEL TUBES ELECTRIC RESISTANT OR INDUCTION BUTT WELDED

MILD STEEL ROUND BAR 12 MM DIA AND BELOW

MILD STEEL SHEETS FOR TANKS

IRON PINTELS INCLUDING WELDED PIN

MILD STEEL SHEETS WITH BOLTS AND NUTS TO REST ON PINTELS

MILD STEEL HOOKS

POLYETHYLENE WATER STORAGE TANK WITH COVER AND SUITABLE LOCKING ARRANGEMENT

INTERLOCKING C.C. PAVER BLOCK (60 MM THICK, M-30)

WALL FORM PANEL 1250X500 MM

VITRIFIED FLOOR TILE 60X60 CM

WATER THINNABLE CEMENT PRIMER FOR INTERIOR WALL SURFACE, HAVING VOC CONTENT LESS THAN 50 GMS/LITRE

VITREOUS CHINA FLAT BACK WASH BASIN 550X400 MM

VITREOUS CHINA PEDESTAL TYPE WASTE CLOSET

VIBRATOR (NEEDLE TYPE 40 MM)

TWISTED STEEL DEFORMES BARS

STAINLESS STEEL KITCHEN SINK - WITHOUT DRAIN BOARD 470X420 MM BOWL DEPTH 178 MM

SINGLE CLIP

SEMI RIGID PVC WASTE PIPE FOR SINK AND WASH BASIN 32 MM DIA WITH LENGTH NOT LESS THAN 700 MM I/C PVC WASTE FITTINGS

QUARRY WASTE

PRECAST CHEQUERED CEMENT TILES 22 MM THICK DARK SHADE USING ORDINARY CEMENT

PVC PIPE 63 MM OUTER DIA. 4 KGF/CM2

PVC 45 DEGREE ELBOW 110 MM DIA

PVC BEND 110 MM DIA

PVC PIPE 25 MM OUTER DIA 10 KGF CM2

PRECOATED GLAVANISED STEEL PLAIN RIDGES

BRIGHT FINISHED OR BLACK ENAMELED MILD STEEL BUTT HINGES 100X58X1.90 MM

STONE AGGREGATE (SINGLE SIZE):06 MM NOMINAL SIZE

PVC Elbow 63 mm dia

PVC Pipe 50 mm outer dia 10kgf/cm2

PVC CORRUGATED ROOFING SHEET

ARCANUT POST

GALVANIZED WIRE MESH OF AVERAGE WIDTH OF APERTURE 1.4 AND NOMINAL DIA OF WIRE 0.63 MM

WIRE NAILS

RAMESH (BID ID -2051270)