SPL REPAIR TO BLDG NO P-73 (MH BHUJ) ,P-74 (46 AD REGT),P-64 (CAPT MD ACCN )AND ADD/ALTN OF BLDG NO. P-291 (08 X OFFICE CUBICAL )FOR MAIN OFFICE AND SKT OFFICE AT 2075 FD HOSPITAL AT MIL STN BHUJ

Amount

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) complete all as specified and directed.

Roughning sufaces of old concrete floor by picking , sweeping cleaning and washing down with water to remove dust etc. Complete all as specified and directed

M&L Coloured Glazed Ceramic tiles (Digital Designer tiles) 300 x 450 and 6-7mm thick on vertical surfaces such as skirting, dados and risers to steps etc including 10mm thick backing coat in CM 1:4 with all possible design combination as specified by Engr-In-charge complete all as specified and directed by Engineer-in-Charge..

M&L non skid ceramic tiles(Coloured) 7 to 8mm thick (square/rectangular) area of each tile exc 0.06sqm but n.exc 0.11 sqm, in in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including screed bed 15mm thick in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

M&L vitrified ,coloured light shade and printed tiles of area not exceeding 0.36sqm , 9 to 10 mm thick as in flooring over and including 15 mm thick cement screed in (1:4 ) CM set and jointed in neat cement slurry set and pointed in white or coloured cement to match with the colour of tiles, with all possible design combination as specified by Engr-In-charge complete all as specified and directed.

M&L vitrified ,coloured and printed light shade tiles of width as directed and 9 to 10 mm thick as in skirting fixed over and including 10 mm thick cement backing coat in (1:4 ) CM set and jointed in neat cement slurry set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles with all possible design combination as specified by Engr-In-chargecomplete all as specified and directed.

Demolition of precast concrete block walling and similar items ie. ashlar facing dressed stone work, precast concrete articles etc.,of any discription and in any position, built in cement mortar, including all quoins, arches and pillars etc. complete all as specified and directed.

M&L for precast cement concrete block masonry with solid blocks of PCC (1:5:8) (using 20mm and 12.5 mm graded stone aggregate in the proportion as directed) exc 10cm in width and set and jointed in Cement Mortar (1:6) complete all as specified and directed.

Taking down cement plaster of any description and in any position of brick/concrete surfaces on walls/celing etc. including racking out joints, hacking for key, scrubbing down with water etc & prepared to receive new plaster complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar on fair faces of brick work or concrete surfaces , applied in two layers ie. Ist layer of 10 mm thick rendering in cement mortar (1:6 ) and 2nd ( top ) layer of 5 mm thick rendering in cement mortar (1:4 ) and top layer mixed with water proofing compound as per manufacturer's instruction & finished even and smooth without using extra cement complete all as specified and directed. (Note:- Water proofing compound shall be measured and paid seperately under appropriate item of Sch 'A' as "supply only")

Supply only water proofing compound (ISI Mark)

M&L for rendering 10 mm thick in CM (1:4) on fair faces of brick work or conrete surfaces/stone masonary and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered sufaces of walls & applying 2 coat of cement base paint over a coat of primer complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of ceiling & applying 3 coats of white wash on ceiling surfaces complete all as specified and directed.

Dismantling water tanks of any description and in any position , of capacity exceeding 500 litres but not exceeding 1000 litres complete all as specified and directed.

S & F Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 500 litres capacity, white in colour hoisted and fixed in position with and including all fittings and fixtures in repairs complete all as specified and directed.

S & F Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, white in colour hoisted and fixed in position with and including all fittings and fixtures in repairs complete all as specified and directed.

S&F in Ball brass valves , high pressure , with polythene float and fly nut complete & high-density plastic ball , suitable for 20 mm bore pipe, screwed for iron pipe and fixed.

Demolition of Cement Concrete (Reinforced) in roof slab,of any description and in any position not otherwise specifically provided for

Demolition of Concrete at any position and of any description complete all as specified and directed.

M&L for Precast RCC (1:2:4) type B1 (using 20mm graded stone aggregrate) as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directing complete all as specified and directed.

Demolition of cement concrete of any description and in any position (unreinforced) in ground floors/ paving not exceeding 15 cm thick (below or above GL) complete all as specified and directed.

M&L for PCC (1:3:6) type C2, (using 40mm graded stone aggregate) as in plinth protection, 75 mm thick, finishing the surface even and smooth w/o using extra cement including forming & filling expension joints 65 mm deep x 10 mm wide filled with sealing compound grade A complete all as specified and directed.

Taking down chowkats or frames n.exc 1.5 sqm with shutters without taking off shutters from the frame and removing to store

Taking down chowkats or frames exc 1.5 sqm & n exc 4 sqm with shutters without taking off shutters from the frame and removing to store

Taking down existing shutters of any description and in any position exceeding 1.00 sqm but not exceeding 2 sqm each leaf complete all as specified and directed

S&F powder coated aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, including rubber gasket and aluminium beading complete all as specified.

M & L for powder coated ( minimum thickess of powder coating 50 micron) alumiium frame for slidig widows with two or more channel icludig joiing cleat for fixing etc .complete all as specified and directed

M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium sliding window with aluminium section weighing 0.55 kg/m including joining cleats, glazing clips, rubber neoprene packing, necessary powder coated hardware i.e.. handles, barrel tower bolts, hinges etc, powder coated aluminium snap beading, screws etc. complete, two shutters tinted glass panes 4.80 mm nominal thickness one shutter with stainless steel wire cloth 0.45mm dia and average width of aperture 1.4mm , aluminium alloy handles etc. complete all as specified and directed. Note : (i) Making all edges i.e. cill and jamb good by cement mortar 1:3 (ii) Frame channel will be paid sepreatly.

M & L powder coated aluminium deco grill medium grade of mesh size 75mmx75mm with 6mm square anodised aluminium bars fixed with aluminium frame of size 9mmX9mmX1mm all as specified

S & F for anodised Aluminium partition/ door frame of size 100 x44 x 1.98mm thick with one or more rebates and shutters pull and push type or side hung type (with or without aluminium sash bars) comprising of top & lock rails of section 115 x 44 x 1.98mm thick, bottom rail of section 150 x 44 x 1.98mm thick and stiles of section 85 x 44 x1.98mm thick including necessary jointing cleat, glazing clip, rubber packing anodized aluminium beading, screws, anodized aluminium fittings such as floor spring or hinges 100mm size with hydraulic door closer, handles 'D' type 125mm, floor door stopper, tower bolts 200mm, sliding door bolt 300mm or mortice lock with 5mm thick tinted glass /pre laminted particle board (Novapan) panel and making good to the disturbed wall surfaces to match existing surface complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & prelam both side colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of prelam colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent cement, supply & fixing in the frame at site as per SSR specifications & diagram/product drawing shown on sl page NO 146 of SSR Part II with the size of door shutter as required & directed by the Engr-in-Charge.

S&F solid PVC door frame of size 50mmX47mm made out of 5mm one side prelam colour PVC sheet reinforced with MS square tube all as per specifications and as per drawing shown on sl page No 150 of SSR part II (for item-884)

S&F 30 mm thick factory made Flush shutters , solid core construction , with block board core and plywood face panels commenrcialface on both sides with lipping/frame to match with complete all as specified and directed.

M & L for 30 mm thick glazed and skeleton shutters of 2nd class Hard Wood(Not less than Hollock wood) local made shutter, open rebated and prepare to reveive glass, guage etc (without sash bars ) edges of framing plain chamfered or rounded, fitted with moulded beads both sides for securing glass etc, size of members of shutters as specified in SSR part I section 8 clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed.

S&F 100 mm long butt hinges stainless steel medium weight and fixed to wooden or PVC frame fixed in repairs by stainless steel screw as directed by Engr-in-Charge.

S&F aluminum handles cast type, anodized of 150 mm size complete all as specified and directed.

S&F 150 mm long aluminium anodised , barrel tower bolt of extruded section and fixed all as specified and directed.

S&F butt hinges 100mm long medium weight, cold rolled mild steel.

S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F in Vitreous China, wash down water closet pan "Pedestal pattern" white including P TRAP OR S TRAP and connection to drain and to flush pipe(flushing cistern not include) and anti syphonic pipe including all joints and making good the disturbed surfaces complete all as specified.

S&F in counter sunk wash hand basin with waste coupling (Make Jaquar Cat No CNS-WHT-WB02 Wash Basin Size (mm) 185 x 450 x 355 and & ALD-705 (wasteCoupling 32mm dia) or equivalant)

S&F PVC connections 15 mm dia and 450 mm long with brass nuts complete all as specified

S&F inPVC valve-less, syphonic action type, flushing cistern, low level, 10 litre capacity (ISI marked) white with inlet, ball valve, float and handle including brackets complete all as specified and directed.

M&L mild steel in framed work [Fe-410-W (grade 250) quality A] as in doors or gates of angle or other section with gusset plates, rails, braces,etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing+B191and including applying two coats of synthetic enamel paint over a coat of primer alround before fixing in position complete all as specified and directed.

S&F Roof trusses (framed) trusses purlins and fastening (etc.,angle, channel,tubular section,round pipe) or flat section including distance pieces, MS plates/ gusset plates, cleats, hold fast etc. conforming to Gde of steel Fe 410-0 or Fe 310-0 complete all as specified and directed.

Preparation of new painted surface of steel and iron surface of any description and in any position over 10 cm width or girth and M&L for applying two coat of synthetic enamel paint over one coat of redoxide primer all as specified and directed by Engr-in-Charge.

Dismantling plain or corrugated A/C or steel sheeting, any guage of any description and in any position as in roof coverings and S &F for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550MPa as in roof covering / cladding to wall, fixed with L or J hooks all as specified and directed.

S & F in repair vitreous china wash basin,white flat back , size 550mmx450mm with and including Waste fittings, brass, chromium plated for basins with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed with and including Supplying and fixing cast copper alloy chromium plated, fancy type, pillar tap, 15mm bore, scrwed down high pressure with or without lettereed hot or cold with long shanks, screwed for iron pipe complete all as specified and directed .

M&L for PCC (1:4:8) type D-2, (using 40 mm graded stone aggregate),75 mm thick, as in sub base for floor, finished even and rough complete all as specified and directed.

M&L for chequered cement concrete tiles 250mm x 250mmx 25mm thick, set jointed and pointed in cement slurry in floors with grey cement and pigments including 15mm thick screed bed in CM 1:6 complete all as directed

S&F in 10mm thick plain edge moulded cornor glass shelf fix with bracket of300 mm wide all as specified and directed by Engr in charge

S&F for shower rose brass chromium plated without swivel joints, 125 mm in size including fixing to steel pipe complete all as specified and directed fixed in repairs.

S&F in PVC (SWR) Nahani trap 75 mm bore, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in PVC (SWR) floor trap 75 mm bore, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in Bib taps , cast copper alloy screwed down high pressure with crutch or butter fly handle fancy type long body CP for 15mm dia bore GI Pipe or for brass ferrule and fixed complete all as specified .

S&F in Stop valves, fancy type chromium plated ISI marked , cast copper alloy, screwed down high pressure for 15 mm bore dia GI tubing pipe, high pressure, with crutch butter fly handle complete all as specified

S&F in Stop valves fancy type chromium plated with long shank and cup (concealed type) Stop valves, ISI marked , cast copper alloy, screwed down high pressure for 15 mm bore dia GI tubing pipe, high pressure, with crutch butter fly handle complete all as specified

S&F in 50 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor

Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) ,of any description and in any position, including all fittings , heads, shoes, bends, swan necks, etc., (measured overall as fixed along the centre line over fittings and accessories)complete all as specified.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring jointsfixed on walls complete all as specified and directed

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring jointsfixed on walls complete all as specified and directed

S&F PVC (SWR) bends, 110 mm bore, any radius with access door complete all as specified and directed.

S&F PVC (SWR) bends, 75 mm bore, any radius with access door complete all as specified and directed.

S&F PVC (SWR) Junction, single, (single T) equal or unequal with access door, 110mm bore, complete all as specified and directed.

S&F PVC (SWR) Junction, single, (single T) equal or unequal with access door, 75 mm bore, complete all as specified and directed.

M&L for PVC (SWR) vent cowl, 110 mm bore complete all as specified and directed.

M&L for PVC (SWR) vent cowl, 75 mm bore complete all as specified and directed.

S&F (concealed / open) 16mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified complete with fitting including taking down existing GI tubing 15mm bore..

S&F (concealed / open) 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified complete with fitting including taking down existing GI tubing 20mm bore.

S&F (concealed / open) 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified complete with fitting including taking down existing GI tubing 25mm bore.

S&F (concealed / open) 40mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified complete with fitting including taking down existing GI tubing 40mm bore..

Preparation of surface and applying two coat of synthetic enamel paint over a coat of pink primer all as specified and directed by Engr-in-Charge.

S&F in stainless steel grating 150 x150mm size over floor trap anti cockros all as approved sample all as specified and directed by Engineer-in-Charge

S&F pillar taps in repair of cast copper alloy with capstan heads chromium plated screwed down high pressure with long swan shanks and fly nuts screwed for iron pipe, 15mm bore fancy type

S&F sinks with drainage board made out of stainless steel 1 mm thick kitchen or laboratory with ;plugs, washers, and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, and connecting union to pipe overall size 495 mm x 420 mm with bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed fixed in repair.

Dismantiling of stone slabs and tiles (Kota stone etc.) of any discription or any thickness in floors, aprons, skirting, dado etc. laid bedded and pointed in any mortar complete all as specified and directed.

M&L for machine cut kota stone slab 20-25 mm thick as in floor laid and jointed with grey cement slurry mixed with pigment to match with the shade including rubbing and polishing over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in cooking plateform, Jambs cill and like set in cement mortar (1:4) inlcuding pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite including rounding of exposed edges of slab smoothly and polished complete all as specified and directed.

Dismantling of board of any description fixed in any postion with nails

S&F 18 mm thick prelaminated PVC Celuka ply prelaminated one side with decorative choice lamination and other side plain fixed with screws to PVC celuka ply works all as directed and as per manufacture instructions Make : Rajshree plasticwood

All as per Above item but 18 mm thick plain cheluka plywood

All as per Above item but 12 mm thick plain cheluka plywood

All as per Above item but 05 mm thick plain cheluka plywood

S&F in Kitchen basket stainless steel for Cup and saucer basket size 430 x508x100 mm made oue of not less than 3 mm dia stainless steel rod of grade 304 along with 01 set of telescopic channel (heavy duty )of size 300mm/450mm long , roller of size 45 mm x25mm x20 mm and magnetic and connected plates to shutters

S&F in Kitchen basket stainless steel for Plain basket size 430 x508x100 mm made oue of not less than 3 mm dia stainless steel rod of grade 304 along with 01 set of telescopic channel (heavy duty ) of size 300mm/450mm long , roller of size 45 mm x25mm x20 mm and magnetic and connected plates to shutters

S&F in Kitchen basket stainless steel for Dish(plate) basket size 430 x508x250 mm made oue of not less than 3 mm dia stainless steel rod of grade 304 along with 01 set of telescopic channel (heavy duty )of size 300mm/450mm long , roller of size 45 mm x25mm x20 mm and magnetic and connected plates to shutters

S&F brass Handle fabricated type polished of Size 100 mm

S&F brass Handle fabricated type polished of Size 75 mm

S&F in ball catcher with 8 mm dia steel ball and brass body and striking plate including letting in and fixed

S & F for plate rack made out of 1 mm thick stainless steel of size 75 Cm X 75 Cm X 25 Cm with all internal fittings and compartments/ partitions all as per sample B-346 Of Prayag all as specified and directed.

S&F CP brass Wall Mixer with Provision for Overhead Shower with 115mm long Bend Pipe on Upper Side, Connecting Legs & Wall Flanges fiting with 15mm dia pipe complete all as specified and directed confirming to cat [art no FUS-5273UPR of jaguar

S&F CP brass BASIN Mixer with all fittings and fixtures and connection pipe, with 15mm dia pipe complete all as specified and directed confirming to Fusion series of jaguar

Complete removal of existing treatment on wall (any number of layers ) by scarping with steel scapers or any other mean including filling depessions of scapped surface with putty and pereparation of surface for further treatment and M&L for two coats of distemper oil emlusion white or tinted over a one coat of wall care putty on walls complete all as specified and dircted by Engr-in -Charge

Complete removal of exiting treatment from external wall preparation of old plastered surface and two coat of premium acrylic exterior anti algal fungal emulsion paint on wall all as direced by Engr-in-Charge.

M&L for special treatment of sunken portion of WCs and Bath room as per following stages: Note: Flat Plan area shall be measured Stage 1 :- Demolition of WC including lime concrete and cement concrete coba etc and preparing the surfaces of existing sunken portion of WCs or bath etc with wire brush to remove all loose dirt, oil grease etc . Stage 2:- Providing 10mm thick plaster in CM 1:3 with chemical of Dr. Fixit Pidicrete URP or plaster seal of STP Ltd Stage 3:- Applying Dr Fixit Primseal primer or STP Ltd(and allow to dry for 8 hours) under touch dry condition Stage 4:- Applying two coats of water proofing decorative elastomeric coating system of Dr Fixit Raincoats with DFT 100 Micron or shalicry 215 of STP(The surface after painting one coats shall be allowed to dry of 6 hours before next coats) all as per manufactutrer instruction Stage 5:-Filling the Same Portion with plain concrete 1:4:8 Type D-2 Stage 6:- Making holes in wall and fixing 600mm long 40mm dia GI spout for draining the surplus water if any.

M & L for water proofing treatment to roof slab by applying one coat of bituminous / polymrised primer confirming to IS 3384 @ 0.30 ltr /sqm and laying grit finish Actetic Polypropylene (APP) modified membrane pre-fabricated , reinforced with non woven polyester , of 3.50 kg/sqm (minimum) , 3mm thick minimum with minimum 75mm side overlaps and minimum 100mm end overlaps etc all as specified.

S&F stainless steel health faucet witrh 1 Mtr tube and hoock complete all as specified and directed ny Engr-in-charge. Confirming to Cat part No ALD573 of jaguar/PRAYAG completed all as specified

Removal of loose and damaged plaster or cover concrete upto good parent concrete or upto reinforcement level, traces of shoots, grease, oil etc. using impact high frequency hammer/chisel without damaging the existing concrete (if required) and by wire brush (metallic brushes only) including cleaning of existing concrete surface carefully by suitable means. The item including all necessary machinery, scaffolding, Providing erecting the safety net of opening 75mm x 75mm x 12 mm size in addition to sturdy GI corrugated arrester tray to prevent the debris falling on ground during progress of work and keeping the same during the entire period of work, providing a well support tubular steel prop arrangement to support the shell and the terrace slab complete from top to bottom, compressor, coarse sand, cleaning the surface by air jet, disposal of unserviceable materials at a identified location as per specification and instruction of Engineer in charge. (Surface area of the member shall be measured for payment purpose)

M&L guniting for shortcrete 1 :2 (CM) mixed with epoxy resin and hardner (manufactured by FOSROC/MC BAUCHEMIC/CICO/PIDILITE)@ 2% by weight of cement in equal proportion using short crete pumps and allied equipment,in thickness 30 mm (average) all as per manufactureres instruction.(Upto 10 m height)

S& F mild steel welded fabric of weight exe 2.5 Kg but n.exc. 4 Kg/ Sqm, fixed to steel members with spikes complete all as specified and as directedby Engineer-in Charge.(Upto 10 m height)

S&F in repair soap dish & holder , colour chrome, brass holder fittings fancy type complete all as specified and directed Make: Confirming to Cat Part CAN CHR 1131N of Jaquar or equivalent other specified make.

Preparation of old decorated surface ofwall and including cornices plastered or unplastered surfaces by brooming down or steel wire brushing to remove all loose scales, and foreign materials scarping down , smoke soot moulds , moss and efflorescent salts treating oil and greasy spots and M&L for applying one coat of cement base paint including watering and curing of surface adeqautely before and after application of cement base paint complete all as specified and directed.

Preparation of old decorated surface of wall and including cornices plastered or unplastered surfaces by brooming down or steel wire brushing to remove all loose scales, and foreign materials scarping down , smoke soot moulds , moss and efflorescent salts treating oil and greasy spots and M&L applying one coat of white wash , complete all as specified and directed. by Engr-in-Charge

Preparation of old decorated surface of ceiling and including cornices plastered or unplastered surfaces by brooming down or steel wire brushing to remove all loose scales, and foreign materials scarping down , smoke soot moulds , moss and efflorescent salts treating oil and greasy spots and applying one coat of white wash complete all as specified and directed.by Engr-in-Charge

S&F in Chromium plated Brass 60 cm longTubular towel rail complete all as specifie

M&L for false ceiling work of galvenised MS ceiling grid system 'UNLOCK" comprising of main runner 38mmx24mmx0.35mm cross tee 38mmx24mmx0.25mm and GI suspenders 4mm dia fixed to ceiling with and including supply and fixing water proof ceiling board of size 600x600x8mm thick complete all as specified and directed and fixed as per manufacturers instructions including taking down existing ceiling of any discription and in any position and making good the disturb surfaces to match with the existing surfaces and finishes

Excavation in trenches n.exc 1.5 m wide & n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil as specified & as directed

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm

Removing excavated soil not exceeding 5.0 Km distance and depositing where directed at alevel n exc 1.5 metre above the starting point . complete all as specified and directed.

M&L Cement concrete in foundations, filling and mass concrete (PCC) Type D2 1:4:8 (40 mm graded aggregate) etc complete all as specified & as directed

S&F in repairs heavy duty Stainless steel (Grade 305) curtain rods 20 to 25mm dia.

BLANK

BLANK

BLANK

S&F in repairs Stainless steel (Grade 305) brackets (Open ends) suitable for curtain rods of 20 to 25mm dia

S&F in repairs Stainless steel (Grade 305) brackets (Dead ends) suitable for curtain rods of 20 to 25mm dia

S&F in repairs Stainless steel (Grade 305) supports suitable for curtain rods of 20 to 25mm dia

Taking down existing wire mesh of any discription and in any position and supplying and fixing Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm (weight not less than 600 gms/per sqm) and fixed with aluminium wire staples, wooden beads etc complete all as specified and directed

Taking down carefully existing unserviceable aluminum/copper point wiring (light, fan, socket or power) of any description & in any position complete including all fittings & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings, lamp holders etc including taking out and removing serviceable fittings/fixtures and making good the disturbed surface of walls, floors, ceiling etc. to match with the existing surfaces complete all as specified and directed

M&L for point wiring with using 1.5 Sqmm (nominal area) multi standard copper conductor, single core, FRLS PVC insulated & unsheathed cable, 1100 volts grade with and including PVC conduit pipe of adequate size concealed type with sunken type pressed steel terminal box and junction boxes 1.6mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings and wiring to be terminated in pressed steel sunken boxes with and including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FRLS PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed for following:- NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes / junction boxes of any shape and size with modular type white plate with suitable brass screws and cup washers

One light/buzzer point controlled by one; one way switch.

One fan/exhaust fan point controlled by one, one way switch

One 3 pin socket out let 5 amp (independent) point controlled by one; one way switch.

One 3 pin socket out let 5 amp point on the (same board) with other switches.

All as per item No. 123 here-in-before but with 2.5sq mm size FRLS pvc insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board.

S&F ceiling rose surface bakelite 63.5 x 20 mm, three terminals, complete all as specified and directed.

Supply and fix modular switch 6 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed.

Supply and fix modular switch 16 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed.

Supply and fix modular bell switch 6 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed.

Supply and fix modular socket, 6 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed.

Supply and fix modular socket, 6 /16 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed.

Supply and fix modular fan regulator 120 W 2 module complete all as specified and directed.

S & F buzzer, ding dong AC 230 Volt single pole complete as specified.

S & F in replacement elegantly industrial general purpose box type luminaire, 1x20 Watt, designed box type LED luminaries, CRCA sheet steel housing with white reflector cover fitted to the body with decorative end covers complete with spring loaded rotor type lamp holders, connected block with and including 01 No LED lamp 20 Watt and all accessories, pre-wired and connecting the same to ceiling rose with & including three core PVC insulated and sheathed copper conductor 23/0.0076 cable including all accessories and fixing arrangement for fixing the light fitting to walls / roof surface over and including 2 Nos PVC square box complete all as specified and directed.

S & F in replacement 10 W mirror light having indirect up down light for mirror and as well light application with CCT 6000K, including LED Bulb/Module and Electrical connection with 3 core flexible wire of appropriate size from ceiling rose to the tubelight fitting, all as specified and directed.

S&F lamp holder PVC / Polycarbonate type with cord grip cap suitable for LED lamp fitting complete all as specified and directed.

Taking down carefully MCBs, Metal clad plug, distribution boards/main switches of any type and size and S & F sheet metal enclosure powder painted for MCB DB SPN 08 way double door with IP-42 protection with Din rail and busbar complete all as specified and directed.

Supply and fixing MCB SPN, 6 to 32 Amps in `C’ series having current rating 10 KA complete all as specified and directed.

Taking down carefully MCBs, Metal clad plug, distribution boards/main switches of any type and size and S & F sheet metal enclosure powder painted for vertical type MCB DB TPN 04 way double door with IP-42 protection with Din rail and busbar complete all as specified and directed.

Supply and fixing MCB TPN, 63 Amps in `C’ series having current rating 10 KA complete all as specified and directed.

S&F MCB single pole, 6 to 32 Amps in `C’ series having current rating 10 KA complete all as specified and directed

Taking Down Old Unserviceable Submain wiring complete including all accessories and making good the disturbed surfaces all as specified and as directed.

M/L for Sub main wiring with 2 runs of PVC insulated unsheathed multi stranded single core copper conducter 6 Sqmm drawn through PVC conduit/casing capping including accessaries with 2.5 sqmm PVC insulated earth wire fixed to the existing wall with saddles, screws etc after removing the unserviceable wiring and connecting up ,all as directed. Note: 2 runs of cable and one run earth wire and conduit/Casing & Caping will be measured as one length.

M/L for Sub main wiring with 4 runs of PVC insulated unsheathed multi stranded single core copper conducter 6 Sqmm drawn through PVC conduit/casing capping including accessaries with 4 sqmm PVC insulated earth wire fixed to the existing wall with saddles, screws etc after removing the unserviceable wiring and connecting up ,all as directed. Note: 4 runs of cable and one run earth wire and conduit/Casing & Caping will be measured as one length.

M&L for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B-1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified & directed. NOTE: Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’

Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation etc for laying of cables, erection of poles, struts/ stays etc not exceeding 10 sqm on plan and getting out in soft loose soil.

Returning, filling in, including spreading leveling watering and well ramming in layers not exceeding 25 cm in any type of soil.

Removing excavated materials to a distance not exceeding 50 m and depositing where directed, at a level not exceeding 1.5 m above the starting point in soils.

M & L for sand filling in trenches for cushioning of LT cables punning after filling complete as specified and as directed. Note: Punned thickness shall only be measured and paid

Supply and lay un-reinforced precast concrete cable cover , class , LV , Type I flat size 250 x 150 x 40 mm laid dry in treches over under ground cables.

S & F GI pipe, light grade, of size 50 mm dia including necessary fittings laid in trenches/fixed on wall/pole for LT cable protection and taking down the old GI pipe, complete all as speicifed and directed for cable protection .

Supplying ,Laying, jointing and testing new XLPE insulated, armoured, heavy duty, LT aluminum conductor cable 1100 volts grade ,laid in trenches/ducts, floors, fixed to walls etc. complete all as specified and directed of size 4 core 16 sqmm complete all as specified and directed

Ram J. Laljani

SHREE BHANU ENTERPRISE