PROVN OF FENCING FOR AF LAND AT OP SITE AT 27 WG.

Excavating in post holes (or similar holes) in soft disintegrated rock each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,

M&L for Cement concrete as using 40mm graded stone aggregate in foundations, filling and mass concrete(Type C2 1:3:6)

S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and counter sunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts ,posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L Mild steel screw bolts 11 to 15 mm dia of neck (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete

M & L for 10 mm dia and over round bars cut to length bent to shape reqd incl cranking bending,spirally for hooping for columns, hooking ends and binding with mild steel wire (anealed) not less than 0.9 mm dia or securing with clips quality conforming to Fe 290 Gde E-165.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire

Supply only Chain link MS galvanised fencing of 3.15mm dia of wire and 40mm X40mm mesh size (pitch of wires) conforming to IS 2721: 2003 including line wires of 4mm dia straining bolts, etc including provision of binding wire complete all as specified.

S & F for MS Framed work by fabrication such as grills, gratings, etc, with ends of bars shouldered and/or riveted, or forged into spike, framed guard bars, barred iron doors, ladders, framed balusters, waik ways railing framed of watertanks etc including portions framed and hung as gates including pintle hinges, stops, hand-made sliding bolts etc conforming to Fe-290, Gde- E-165, complete all as specified and directed.

M & L for preparation of new surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of primer as specified.

Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains, for shafts, wells, cesspits, manholes, pier holes, etc (not exceeding 1.5m in width or 10 sqm on plan), ordinary rock including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m complete for getting out in all kind of soil as specified and directed.