PROVN OF SECURITY CHAIN LINK FENCE WITH PILLARS ALONG STN BDY OF MED REGT AT MIL STN BHUJ UNDER GE ARMY BHUJ

Amount

M & L for Excavation in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft and loose soil complete all as specified and as directed.

M & L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and as directed.

S&F of Framed works for chain links angles, frame work for watertanks etc conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

M& L for round bars 10mm dia and over cut to length, bent to shape including cranking, binding spirally for hooping for columns hooking ends and binding with end including mild steel wire annealed) not less than 0.9mm dia complete all as specified and as directed.

Supply only chain link mild steel galvanized fencing of mesh size 75mm and Nominal dia of mesh wire not less than 3.15 mm complete all as specified and as directed.

Fixing only chain link fencing including line wire, any mesh size and type to any type of standard rails, straining bolt etc complete all as specified and as directed.

Supply only mild steel flat iron of Fe-410-0 or Fe-310-0 in required length for fixing/supporting to chain link fencing and post complete all as specified and as directed.

S & F mild steel (5 to 10mm dia of neck) screw bolt (machine made) exc 5cm but not exc 10 cm in length with hexagonal or square head at one end and screwed the other each screw end to be fitted with washer 3 mm thick mild steel complete all as specified and as directed.

S & F of Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed.

S&F of Concertina Razor wire coil of 450 mm dia and fixed to MS Angles complete all as specified and as directed.

M&L Preparation of new steel surface of any description n exc 10 cm width or girth when unconnected with other painting or when painted indifferent tint complete all as specified and as directed.

M&L Preparation of new steel surface exc 10 cm width and girth and applying two coat of synthetic enamel paints over and including a coat of red oxide primer complete all as specified and as directed.

Excavating in trenches n exc 1.5 m wide and n exc 1.5 m in depth for foundation etc or for shafts, wells,cesspits, man holes, pier holes etc n exc 10 sqm on plan and n exc 1.5m in depth and getting out in soft/ loose soil complete all as specified and as directed.

M&L for Pre-cast cement concrete block masonry1:3:6 Type C1 (using 20mm graded aggregate) with solid blocks, exc. 10cm in width and setting in mortar complete all as specified and directed.

M&L for 10 mm thick rendering on surfaces other than fair faces of brick/concrete surfaces in CM (1:6) and finished even and smooth without using extra cement and applying three coats of white wash complete all as specified and directed.

Returning filling in including spreading , levelling , watering and well ramming in layers n, exc, 15 cm complete all as specified and as directed.

Removing excavated material exc1.5 km and n.exc 5.0 KM depositing where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed.

ASHAPURA CONTRACTOR (BID ID -3174241)

SAPPERS CONSTRUCTION (BID ID -3174175)

MARA CONSTRUCTION CO (BID ID -3176825)