SDSTPS

Earthwork excavation by mechanical means as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH

Cutting, bending and placing HYSD/TMT bar of Fe550D reinforcement in foundation/pedestals complete as per drawings and technical specifications for Bars below 36 mm dia including cost and conveyance of all materials (But excluding cost of reinforcement steel, which will be issued free of cost at SDSTPS stores) like binding wire cost, labour charges for shifting, bending, placing & conveyance of free issued materials to the site with a lead of 1 Km etc complete for finished item of work as directed by the Enginer- In-Charge.

Supply and placing of the M35 Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials (But excluding cost of cement which will be issued free of cost at SDSTPS stores) like fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with cement content as per IS code from standard suppliers approved by the department including pumping, steel centering, shuttering, laying concrete, vibrating, curing and conveyance of free issued materials to the site with a lead of 1 Km, etc. complete for finished item of work.

Supply, fabrication and erection of the structural steel members with MS angles, channels and MS plate of approved brand as directed by the Engineer in charge and as per approved drawings upto a height of 9.00 meters from ground level, including cost and conveyance of structural steel with grade E250 as per IS 2062, at all heights, all leads including all safety mesures vide IS code IS-7205 etc., complete for finished item of work as directed by the engineer Incharge.

Supply and fixing of G.I anchor bolts in foundation with nuts and washers of size M 32 dia or below of approved brand and length as directed by the Engineer in charge and as per approved drawings at any height of upto 6 meters from ground level, including cost and conveyance with grade 8.8 as per IS 1367 (Part 3), at all heights including all safety mesures vide IS code IS-7205 etc., complete for finished item of work as directed by the engineer Incharge.

Supply and applicaation epoxy anchor grout, duly drilling holes of size not less than 18mm, cleaing, placing the rods and injecting the grount, including cost of two parts epoxy resin based grout and labour charges for application as directed by the engineer incharge.

Painting the corroded structural steel frames of various rolled sections at all elevations, by applying one coat of Primer followed by two coats of Epoxy Paint, so as to achieve the DFTs not less than 100 microns, 100 microns & 50 microns respectively, duly preparing the metal surfaces with power tools and removing the dust, with all access scaffolding and safety arrangements such as safety belts and safety ropes etc, including cost of buffing wheels, hire charges buffing machine, cables for buffing machine etc., and labour charges with all lifts as directed by the engineer incharge. (All paints including thinner will be issued by the department from stores at free of cost.)