Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹1.8 Cr
EMD Value
₹1.8 L
Closing Date
17 Nov 2026, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer Panchayat R and B Division Bhuj-Kachchh
Resurfacing of Bhuj Dhaneti Ukhadmora Re-Road.Km 0/000 to 5/10 Ta: Bhuj, Dis: Bhuj-Kachchh under MMGSY (Resurfacing) Year-2026-27.
361530
52-2026/2027
Open
Civil Works - Roads
Works
Kutch
7 documents required · 7 mandatory
₹3,600
Executive Engineer Panchayat R and B Division Bhuj-Kachchh
₹1.8 L
2 Nov 2026
2 Nov 2026
2 Nov 2026
17 Nov 2026
2 Nov 2026
90 days
No. figures Amount
1 Clearing and grubbing road land including uprooting wild vegetation grass 2.00 Hect. 28455.09
bushes, shrubs, sapling and trees of girth up to 300mm removal of stumps
of trees cut earlier and disposal of unserviceable materials and stacking of
serviceable materials as per Clause-201 (area of light density) by
mechanical means in area of light jungle.
2 Earthwork in cutting including preparing the slope and camber and 367.20 Cum 109.24
stacking or utilizing the cutting stuff in spoil bank as directed upto
meters from the end of cutting with all lead and lift. (A) Hard Murrum.
3 Earth work for embankment including breaking clods, dressing with all 473.00 Cum 180.87
lead and lift (Including watering and consolidation) (C) from borrow Area
within 1.0 km lead (With minimum 6% CBR)
4 Rolling and watering of earthwork in layers with power roller including 679.00 Cum 22.96
filling in depressions which occur during the process.
5 Box cutting the road surface to proper slope and camber for making a base 495.00 Cum 109.24
for road work including removing the excavated stuff and depositing on the
road side slope as directed upto all lead and lift.
6 Construction of compacted granular sub base ( Grade-I , Crushed B T 214.00 Cum 811.40
materials of 53 mm to 26.5 mm @ 35 %, 26.5 mm to 4.75 mm @ 45 %,
Below 2.36 mm @ 20 % ) by providing close graded material , mixing in a
mechanical mix plant at OMC, carriage of a mix material to work site,
spreading uniform layers with motor grader on prepared surface and
compacting with
7 Providing and laying W.B.M. of M.C. metal of size 45 mm to 63 mm size 15.00 Cum 1104.94
including 0.12 Cu.M. Stone screening & 0.08 Cu.M. stone dust as filler
including spreading, watering & consolidation by vibratory roller 80KN to
100KN static weight. 75mm thick compacted.
8 Providing and laying Compacted of Specified Murrum in side shoulder 1020.00 Cum 392.89
including carraige of material and spreading on prepared base including
compacting as per MOST Specification etc... complete.
9 Providing and laying bituminous grout 37.5mm compacted thick using 1308.00 M.T. 3001.72
B.T. stone aggregates as per required gradation with the asphalt VG-30
grade for tack coat 2.5 Kg/10 Smt on B.T. surface and 4.0 Kg/10 Smt on
W.B.M. surface and asphalt VG-30 grade for mixing @ 1.99% i.e.
kg./ MT by weight of mix including heating and mixing in drum mix plant
transporting the mix, spreading the same by pavers finisher and
consolidation as per MORTH specification including cost of all materials
fuels, labors, tools and plant etc. using contractors own drum mix plant etc.
completed as directed.
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
10 Providing and laying 37.50 mm thick compacted B.M. using stone chips 1439.00 M.T. 4091.51
0.66 Cum/1 M. ton mix as per gradation with Asphalt VG-30 for tack coat
@ 2.50 kg./10 Smt. on B.T. surface and asphalt grade VG-30 for mixing @
34 kg/M.Ton (i.e. 3.40% of mix) including heating the and aggregate by
continuous batching drum mix plant, transporting and mixed material and
spreading the same by paver finisher and consolidation by vibratory roller
of 80 KN to 100 Kn static weight including the cost of labour oil,
lubricants etc. using contractors own machineries and plant.
11 Providing and laying 20mm thick mix seal surfaceasing using B.T. chips as 803.00 M.T. 5182.31
per required gradation and mixing asphalt grade VG-30 @ 5.10% by
weight of total mix and mixing by contractor's own drum mix plant and
laying by sensor paver finisher and consolidation with vibratory roller
including necessary firewood, oil, lubricants, labor charges etc. using
contractor's own drum mix plant and equipment, tool etc. completed in
accordance with the requirement of specification.
12 Proving and laying cement concrete grade M-20 (1-Cement : 1.5 sand : 3 321.00 Cum 5294.42
coarse aggregate 20mm nominal size) for C.C. road and curing etc.
complete including cost of formwork, finishing the cement concrete road
by Trimix process inclusive of labour charges for trimix vaccume
dewatering process on cement concrete road by using vaccume dewatering
pump, surface floater, including chanelling and making grooves & rough
finish to surface, providing expansion joint, construction joint including
filling the joint with asphalt filler as per direction by engineer in charge
and as per specification.
13 Providing and fixing in position FE 500D TMT bar reinforcement 6.70 M.T. 73243.02
including cutting, bending and tying complete as per detailed drawings.
(A) R.C.C. Kerb. (B) R.C.C. Footpath.(C) R.C.C. Approach slab.(D)
Wearing Coat.
14 Providing and fixing ordinary kilometer stone of precast C.C. 1:2:4 6.00 No. 704.33
including necessary reinforcement as per I.R.C. type design in C.C. 1:4:8
including painting, lettering etc. complete (For O.D. road V.R.)
15 Providing and fixing Hectometer stone as per I.R.C. type design including 20.00 No. 116.08
painting, lettering etc.complete (i) Fixing in earth.
16 Providing and fixing Guard stone as per I.R.C. type design including white 150.00 No. 103.56
washing etc. complete (i) Fixing in earth.
17 Direction sign (Junction board) :- Providing and fixing sign boards made 1.00 No. 14831.71
out of 2mm aluminium sheet size 244 x 122cms. rectangle as per the
design of IRC-67-1977 pre treated with phospheting process & acid
etching; coated with one coat of epoxy primer and two coats of best quality
epoxy paint, reflectorised with retro reflective sheeting as per latest
M.O.S.T. specifications; Letters and numerals should be as per IRC-30-
1968, 3.1m long (2 nos) stand post and frame fabricated from suitable size
iron angle of 50 x 50 x 5mm, 75 x 75 x 6mm as required painted with best
quality epoxy coatings in black and white bends. The details of symbol or
inscription / numerals for each board shall be as per the instruction of
engineer in charge. The fixing at site shall be in 1:2:4 CC block of size
x 45 x 60cms. for each leg including excavation curing etc. complete under
the supervision of engineer in charge. (A) Engineer Grade (VR)
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
18 Regulatory / Mandatory signs : Providing and fixing sign boards made out 2.00 No. 3439.81
of 2mm aluminium sheet size 60cms. diameter circle as per the design of
IRC-67-1977 pre treated with phospheting process & acid eteching, coated
with one coat of epoxy primer and two coats of best quality epoxy paint,
reflectorised with retro reflective sheeting as per latest M.O.S.T.
Specifications; 3.1m long stand post and frame fabricated from suitable
size iron angle of 35 x 35 x 3mm, 75 x 75 x 6mm as required; painted with
best quality epoxy coatings in black and white bends. the details of symbol
for each board shall be as per the instruction of engineer in charge. The
fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for each
leg including excavation curing etc. complete under the supervision of
engineer in charge. (A) Engineer Grade (VR)
19 Village name/ Bump Ahead sign :- Providing and fixing sign board made 2.00 No. 5045.36
out of 2 mm alluminium sheet size 90 x 60 cms rectangle as per the design
of IRC-67-1977 pre treated with phospheting process and acid etching
coated with one coat of epoxy primer and two coats of best quality epoxy
paint reflectorised with retro reflective sheeting as per latest M.O.R.T.H.
specifications. Letters and numerals should be as per IRC-30-1968, 310m
long (2 Nos.) stand post and frame fabricated from suitable size iron angle
of 50 x 50 x 5 mm painted with best quality epoxy coating in black and
white bends. The details of symbol or inscription / numerals for each board
shall be as per the instruction of engineer in charge. The fixing at site shall
be in 1:2:4 C.C. block of size 45 x 45 x 60 cms for each leg including
excavation, curing etc. complete under the supervision of Engineer-in-
charge (A) Engineer grade (VR).
20 STOP SIGN :- Providing and fixing sing boards made out of 2mm 2.00 No. 4676.06
aluminium sheet size 90 x 90cms. rectangle as per the design of IRC-67-
1977 pretreated with phospheting process & acid etching, coated with one
coat of epoxy primer and two coats of best quality epoxy paint reflectorised
with retro reflective sheeting as per latest M.O.S.T. specifications; 3.1m
long stand post and frame fabricated from suitable size iron angle of 35 x
35 x 3mm, 75 x 75 x 6mm as required; painted with best quality epoxy
coatings in black and white bends. The details of symbol for each board
shall be as per the instruction of engineer in charge. The fixing at site shall
be in 1:2:4 CC block of size 45 x 45 x 60cms. for each leg including
excavation curing etc. complete under the supervision of Engineer in
charge. (A) Engineer grade (VR).
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
21 MMGSY"LOGO"Board: Providing and fixing of MMGSY LOGO 1.00 No. 6256.35
informatory sign board with Logo as per section 1700 of MORD
specifications and drawing. The board will be a composite unit consisting
of Two Plates of ACM (Aluminum Composite Material), specifications as
per clause 17001.3. The top most plate will be of 3mm ACP in diamond
shape of 600x600 mm size, riveted with MS angle iron frame of
25mmx25mmx5mm size on back on edges. The Lower plate will be of
4mm ACPof 1100x300mm size riveted with MS angle iron frame of
25mmx25mmx5mm size on back on edges.Riveting of all the sheets over
angle and flat iron frame will be done neatly to have plain surface on one
side. The angle iron frame of Both the plates will be welded to a
75mmx75mmx6mm Mild steel post at Centre and this post will be
embeded in cement concrete M15 grade block of 450x450x600mm below
ground level. The height of the bottom of the lower plate will be 1200mm
from normal ground level. The spacing between the diamond shaped plate
and Lower Plate is kept 150mm.MMGSY Logo, letters and numerals on
the ACM should be made up of Retro Reflectivesheeting of Type-1 AEGP
Class-A grade as per the latest MORD section 1700 and IRC67-2012
specifications. All the section of the frame and posts shall be painted with
primer and two coats of epoxy paint. The design, painting and lettering
shall be done as per the MMGSY Logo sign design and as directed by
Engineer-in-charge. A warranty for 5 years for the Retro reflective for
Type-1 Class-A from original manufacture shall be submiteed by
contractor.
22 Providing and filling in foundation with ordinary cement concrete M-100 161.00 Cum 3327.08
mix and providing necessary vertical pin headers including formwork,
vibrating, ramming and curing complete.
TOTAL Rs.
i.e. Rs. One Crore Seventy Six Lakh Thirteen Thousand Nine Hundred Sixteen Rupees And Thirty Seven Paise only.
I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written
in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.
Estimated amount put to tender Estimated amount put to tender
Deduct………% below Add………% Above
Net Rs. ___________________________ Total Rs. ________________________
In words ____________________ In words ____________________
1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge
for which no extra payment shall be made.
2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3. GST and Income tax TDS will be deducted at a source while making payments of bills.
4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017
Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per
actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at the rate
of input rate mentioned in all the tender.
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and found
Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer
Panchayat (R & B) Sub Division, Panchayat (R & B) Division, Panchayat (R & B) Division,
Bhuj Bhuj-Kutch Bhuj-Kutch
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
GRs - 1.pdf
GRs - 2.pdf
GR - 12.10.2020.pdf
Perforamance Security Price variation modificatin.pdf
EE-P-Bhuj-Road-Furniture.pdf
technical specification.pdf
SBD DHANETI UKHADMORA ROAD.pdf
Sch-B.pdf
Sp Index.pdf
Testing schedule.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .