Construction of Record House near Pump House (G+2 Floors) by duly dismantling the archon shed in Vidyuth Soudha Premises, Gunadala, Vijayawada.

Dismantling of existing Brick masonry including clearing away and carefully stacking materials useful for re use and all debris 100M away from the site with labour charges, T&P complete as per the directions of the Engineer in charge for the finished item of work.

Dismantling of existing cement concrete by mechanical means including T&P and scaffolding wherever necessary, sorting the dismantled material. disposal of unserviceable material and stacking the serviciable material with all lifts and lead of 1000m, labour charges, complete as per the directions of the Engineer in charge for the finished item of work.

Dismantling of existing stone masonry in cement mortar, including carefully stacking materials useful for re use and clearing all debris 1.0KM away from the site with all lifts, labour charges, T&P complete as per the directions of the Engineer in charge for the finished item of work.

Dismantling doors, windows and clear storey windows, ventilators etc.; (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachments etc., complete and stacking them at departmental stores ( By departmental Vehicle) and disposing the unserviceable material away from site premises by contractors own transport as specified and directed by the engineer-in - charge. (Not exceeding 3 sq.m. in area)

Dismantling doors, windows and clear storey windows, ventilators etc.; (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachments etc., complete and stacking them at departmental stores ( By departmental Vehicle) and disposing the unserviceable metraial away from site premises by contractors own transport as specified and directed by the engineer-in - charge.( Exceeding 3 sq.m. in area)

Dismantling of existing AC sheet roofing including carefully stacking materials useful for re use and clearing all debris 1.0KM away from the site with all lifts, labour charges, T&P complete as per the directions of the Engineer in charge for the finished item of work.

Dismantling structural steel work in all types of sections/ Channels/ pipes/ Angles etc of factory buildings, godowns building etc., dismembering by gas cutting at all heights, scaffolding, labour charges, including stacking of all dismantled materials at departmental stores and disposing the unserviceable material away from site premises by contractors own transport as specified and directed by the engineer-in - chargewith all lifts and lead upto 1000m etc., complete for finished item of work.

Augering and boring of holes in site for Bored cast-in-situ R.C.C. UNDER REAMED Piles for foundations in loamy, clayey soils like Black cotton soils and ordinary soils without under reams as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, auger bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of following diameters. (Excluding cost of steel and its fabrication and Cost of RCC ). 350mm to 450mm Diameter Piles with out bulb

Under-reaming for Bored cast-in-situ R.C.C. UNDER REAMED Piles for foundations in loamy, clayey soils like Black cotton soils and ordinary soils with Augoring and boring equipment in site as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, auger bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of following diameters. (Excluding cost of steel and its fabrication and Cost of RCC ). 350mm dia to 450mm dia Piles

Earthwork excavation in all types of soils (up to stone matrix)which can be excavated with pick axe and crow bars and do not require blasting in all conditions such as dry, wet and slushy etc. covering initial lead and lift etc and backfilling the foundations (after laying foundations) with excavated earth complete as per the the directions of the Engineer in charge for the finished item of work.

Providing Crusher dust cushion for foundations and basement in layers, not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost & conveyance of all materials, operational, incidental, labour charges, hire charges of T&P at all leads, lifts etc. complete as per the directions of the Engineer in charge for the finished item of work.

Laying of Cement Concrete (1:4:8) mix using 40mm size HBG Machine crushed metal for foundations including cost and conveyance of all materials at all leads and lifts, ramming, consolidating, curing etc,complete. for finished item of work as per directions of the Engineer-in-charge.

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) (Fe-500/Fe-500D/FE-550 grade as per IS 1786-1979) of TISCO/ SAIL/ VSP make, different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Supply and Fixing of 180 GSM LDPE sheet of approved make over slabs and beams centering before placing of Steel reinforcement to avoid slurry leakage and to avoid honeycomb, including labour charges for laying the sheet neatly, cutting and jointing the sheet properly with overlapping of 20cm at joints with Fevicol & Tape and for tying in position with binding wire, removing sheet while removing the centering including cost & conveyance of all materials, tools at all leads and lifts etc complete as per the directions of the Engineer in charge for the finished item of work.

Supply and placing RCC M- 30 Design mix Concrete (using Cement not less than 400 kgs) using Weigh Batcher/ Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 400 kg , sand 0.40 cum and metal 0.80 cum). FOR UNDER REAMED PILES

Supply and placing RCC M- 30 Design mix Concrete (using Cement not less than 400 kgs) using Weigh Batcher/ Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 400 kg , sand 0.40 cum and metal 0.80 cum). FOR PILE CAPS

Supply and placing RCC M- 30 Design mix Concrete (using Cement not less than 400 kgs) using Weigh Batcher/ Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 400 kg , sand 0.40 cum and metal 0.80 cum). For PLINTH BEAMS

Supply and placing RCC M- 30 Design mix Concrete (using Cement not less than 400 kgs) using Weigh Batcher/ Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 400 kg , sand 0.40 cum and metal 0.80 cum). FOR COLUMNS with Steel scaffolding GROUND FLOOR

Supply and placing RCC M- 30 Design mix Concrete (using Cement not less than 400 kgs) using Weigh Batcher/ Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 400 kg , sand 0.40 cum and metal 0.80 cum). FOR COLUMNS with Steel scaffolding FIRST FLOOR

Supply and placing RCC M- 30 Design mix Concrete (using Cement not less than 400 kgs) using Weigh Batcher/ Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 400 kg , sand 0.40 cum and metal 0.80 cum). FOR COLUMNS with Steel scaffolding SECOND FLOOR

Supply and placing RCC M- 30 Design mix Concrete (using Cement not less than 400 kgs) using Weigh Batcher/ Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 400 kg , sand 0.40 cum and metal 0.80 cum). FOR LINTELS with steel scaffolding GROUND FLOOR

Supply and placing RCC M- 30 Design mix Concrete (using Cement not less than 400 kgs) using Weigh Batcher/ Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 400 kg , sand 0.40 cum and metal 0.80 cum). FOR LINTELS with steel scaffolding FIRST FLOOR

Supply and placing RCC M- 30 Design mix Concrete (using Cement not less than 400 kgs) using Weigh Batcher/ Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 400 kg , sand 0.40 cum and metal 0.80 cum). FOR LINTELS with steel scaffolding SECOND FLOOR

Supply and placing RCC M- 30 Design mix Concrete (using Cement not less than 400 kgs) using Weigh Batcher/ Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 400 kg , sand 0.40 cum and metal 0.80 cum). FOR ROOF BEAMS with Steel Centering GROUND FLOOR

Supply and placing RCC M- 30 Design mix Concrete (using Cement not less than 400 kgs) using Weigh Batcher/ Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 400 kg, sand 0.40 cum and metal 0.80 cum). FOR ROOF BEAMS with Steel Centering FIRST FLOOR

Supply and placing RCC M- 30 Design mix Concrete (using Cement not less than 400 kgs) using Weigh Batcher/ Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 400 kg, sand 0.40 cum and metal 0.80 cum). FOR ROOF BEAMS with Steel Centering SECOND FLOOR

Supply and placing RCC M- 30 Design mix Concrete (using Cement not less than 400 kgs) using Weigh Batcher/ Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 400 kg, sand 0.40 cum and metal 0.80 cum). FOR SLABS (upto 150mm thick) with steel centering Ground Floor

Supply and placing RCC M- 30 Design mix Concrete (using Cement not less than 400 kgs) using Weigh Batcher/ Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 400 kg, sand 0.40 cum and metal 0.80 cum). FOR SLABS (upto 150mm thick) with steel centering First Floor

Supply and placing RCC M- 30 Design mix Concrete (using Cement not less than 400 kgs) using Weigh Batcher/ Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 400 kg, sand 0.40 cum and metal 0.80 cum). FOR SLABS (upto 150mm thick) with steel centering Second Floor

Supply and placing RCC M- 30 Design mix Concrete (using Cement not less than 400 kgs) using Weigh Batcher/ Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 400 kg, sand 0.40 cum and metal 0.80 cum). FOR SUNSHADES (0.60 M X (0.075M avg thick) X1M Ground Floor (Steel Centering)

Supply and placing RCC M- 30 Design mix Concrete (using Cement not less than 400 kgs) using Weigh Batcher/ Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 400 kg, sand 0.40 cum and metal 0.80 cum). FOR SUNSHADES (0.60 M X (0.075M avg thick) X1M First Floor (Steel Centering)

Supply and placing RCC M- 30 Design mix Concrete (using Cement not less than 400 kgs) using Weigh Batcher/ Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 400 kg, sand 0.40 cum and metal 0.80 cum). FOR SUNSHADES (0.60 M X (0.075M avg thick) X1M Second Floor (Steel Centering)

Supply and placing RCC M- 30 Design mix Concrete (using Cement not less than 400 kgs) using Weigh Batcher/ Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 400 kg, sand 0.40 cum and metal 0.80 cum).Vertical wall upto Ground level for Basement

Plain Cement concrete - Nominal Mix (1:3:6) with 12 to 20mm (50% each) HBG metal with necessary form work including cost and conveyance of all materials, machine mixing, labour charges, water charges, tools and tackles, all leads & lifts etc., complete for finished item of work as per directions of the Engineer-in-charge. (IS-456)

Construction Brick Masonry in CM (1:6) with Aerated (Cellular) Autoclaved Concrete Blocks conforming to IS: 2185 (Part - 3) - 1984 and IS - 6441 - 1972 of Compressive Strength 3 N/mm2 or equivalent products Bricks of Size 60 x 20 x 20 cms of approved quality, including cost & conveyance of all materials, labour charges, scaffolding charges at all leads, lifts and curing complete as per the directions of the Engineer in charge for the finished item of work. For Ground Floor

Construction Brick Masonry in CM (1:6) with Aerated (Cellular) Autoclaved Concrete Blocks conforming to IS: 2185 (Part - 3) - 1984 and IS - 6441 - 1972 of Compressive Strength 3 N/mm2 or equivalent products Bricks of Size 60 x 20 x 20 cms of approved quality, including cost & conveyance of all materials, labour charges, scaffolding charges at all leads, lifts and curing complete as per the directions of the Engineer in charge for the finished item of work. For First Floor

Construction Brick Masonry in CM (1:6) with Aerated (Cellular) Autoclaved Concrete Blocks conforming to IS: 2185 (Part - 3) - 1984 and IS - 6441 - 1972 of Compressive Strength 3 N/mm2 or equivalent products Bricks of Size 60 x 20 x 20 cms of approved quality, including cost & conveyance of all materials, labour charges, scaffolding charges at all leads, lifts and curing complete as per the directions of the Engineer in charge for the finished item of work. For Second Floor

Laying of Cement Concrete (1:4:8) mix using 50% of 40mm size and 50% of 20mm HBG machine crushed metal for bed flooring including cost and conveyance of all materials at all leads and lifts, ramming, consolidating, curing etc,complete. for finished item of work as per directions of the Engineer-in-charge.

Pre construction Anti termite is a process in which chemical toxic to subterrean termites is applied/ injected into soil during early stage of building Construction and Treatment of soil Beneath the building and around the foundations complete and chemical use as per BIS - IS 6313 (Part -2) 2013 code specification & CIB RC registered termiticide which creates a continuous chemical barrier beneath the building which kills or repels termites & impervious to termite entry with Imidacloprid 30.5% SC (IS 63131) dissolve 2.1 Ml/1 liter of water and apply emulsion/solution @ 7.5 Litres/Square meter (Sqm) of internal, external vertical surface of the colums, plinth beams (Back filling) walls and floor junction, external perimeters, along retaining wall @ 5.0 Liters/Sqm of the horizontal surface of basement top surface of the basement filling below flooring bed (Plinth) & @ 2.0 Litres/ Line meter at expansion joints. The substructure to a depth of 500mm around columns & 300mm deep around plinth beams, basements & floor filling area including excavation of channel along the wall & rodding etc. including Cost & Conveyance of all materials to the site, cost of labour for sparying, rodding etc. complete for finished item of work as per the approval of the Engineer-in-charge.

Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM). coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability/Epoxy polyester powder for powder coating paint thickness 50-60 microns (Dry film thickness) outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam joints at stile edges, in-fill of honeycomb kraft paper used to give the required rigidity and effective acoustic insulation with 6” Tower bolt - 2 Nos., 6” D handles - 2 Nos., 10” Aldrop - 1 No., Butt Hinges - 6 Nos, Mortise Lock of approved quality - 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws complete for finished item of work. for Double leaf Door

Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM)coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability/Epoxy polyester powder for powder coating paint thickness 50-60 microns (Dry film thickness) outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam joints at stile edges, in-fill of honeycomb kraft paper used to give the required rigidity and effective acoustic insulation with 6” Tower bolt – 1 No., 6” D handles – 2 Nos., 10” Aldrop – 1 No., Butt Hinges – 3 Nos, Mortise Lock of approved quality – 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws complete for finished item of work for Single leaf Door

Providing and fixing factory made uPVC any colour sliding glazed window above 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads, uPVCextruded interlocks and uPVC extruded Inline sash adaptor (if required), EPDM gasket/TPV, wool pile, zinc alloy (white powder coated) handle onone side of extreme panel along with zinc plated mild steel multi pointlocking having transmission gear with keeps, zinc alloy (white powdercoated) touch lock with hook (if required for wire mesh panel), stainlesssteel (SS 304 grade) body with adjustable double nylon rollers (weightbearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixingframe to finished wall and necessary stainless steel screws etc. Profileof frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shallbe filled with weather proof silicon sealent over backer rod of requiredsize and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent. Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above2.50 sqm upto 4.00 sqm.)

Providing and fixing factory made uPVC white colour fixed glazed windows /Ventilators comprising of uPVC multi-chambered frame and mullion (whereever required) extruded profiles duly reinforced with 1.60± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape&size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion(if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in Charge inclusive of cost of Single / double glass panes and silicon sealant. Fixed windows / Ventilators made of (small series) frame 47x50mm & mullion 47 x 68 mm both having wall thickness of 1.9±0.2mm and single glazing bead of appropriate dimension

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size of 45x75MM (ISI Make) with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM. The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control handdrilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. and fixing with 28-30 MM thick solid Wood Polymer Composite (WPC ) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum (ISI Make). shutter will be fixed to the frame using 3 inch hinges. A minimum of 4 hinges will be required including cost of fixtures like 4Nos. Aluminium Butt hinges (IS:205)- 75 mm , 2Nos. MS-Powder Coated Door Handles (IS:208) 150 mm, 1No. Aluminium Tower Bolt-10 mm Bolt (IS:204) 100 mm and 1No. MS-Powder Coated Aldrops (IS:2681) 200 mm, cost and conveyance of all materials, labour charges for fixing, Transportation etc., complete for finished item of work and as per the directions of the Engineer-in-charge

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost & conveyance charges of all materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work. For Second Floor Roof Slab

Plastering with CM (1:3), 12 mm thick ceiling and projections of beams at all heights including cost & conveyance of all materials, scaffloding, labour charges, leads, lifts and curing complete as per the directions of the Engineer in charge for the finished item of work. For Ground Floor

Plastering with CM (1:3), 12 mm thick ceiling and projections of beams at all heights including cost & conveyance of all materials, scaffloding, labour charges, leads, lifts and curing complete as per the directions of the Engineer in charge for the finished item of work. For First Floor

Plastering with CM (1:3), 12 mm thick ceiling and projections of beams at all heights including cost & conveyance of all materials, scaffloding, labour charges, leads, lifts and curing complete as per the directions of the Engineer in charge for the finished item of work. For Second Floor

Plastering with CM 2 coats, 20 mm thick,base coat in CM (1:6), 16mm thick and top coat in CM (1:4), 4mm thick with Dubara sponze finishing.on the uneven surfaces of wall including cost & conveyance of all materials, labour charges, leads, lifts, scaffolding and curing etc complete as per the directions of the Engineer in charge for the finished item of work. For Ground Floor

Plastering with CM 2 coats, 20 mm thick,base coat in CM (1:6), 16mm thick and top coat in CM (1:4), 4mm thick with Dubara sponze finishing.on the uneven surfaces of wall including cost & conveyance of all materials, labour charges, leads, lifts, scaffolding and curing etc complete as per the directions of the Engineer in charge for the finished item of work. For First Floor

Plastering with CM 2 coats, 20 mm thick,base coat in CM (1:6), 16mm thick and top coat in CM (1:4), 4mm thick with Dubara sponze finishing.on the uneven surfaces of wall including cost & conveyance of all materials, labour charges, leads, lifts, scaffolding and curing etc complete as per the directions of the Engineer in charge for the finished item of work. For Second Floor

Plastering with CM (1:5), 12 mm thick to the even wall surfaces including cost & conveyance of all materials, labour charges, leads, lifts, scaffolding and curing complete as per the directions of the Engineer in charge for the finished item of work. For Ground Floor

Plastering with CM (1:5), 12 mm thick to the even wall surfaces including cost & conveyance of all materials, labour charges, leads, lifts, scaffolding and curing complete as per the directions of the Engineer in charge for the finished item of work. For First Floor

Plastering with CM (1:5), 12 mm thick to the even wall surfaces including cost & conveyance of all materials, labour charges, leads, lifts, scaffolding and curing complete as per the directions of the Engineer in charge for the finished item of work. For Second Floor

Plastering to Uneven surfaces of BM, RR /CR, PCC with CM (1:5) 20mm. thick including cost & conveyance of all materials, labour charges, leads, lifts, curing and without scaffolding complete as per the directions of the Engineer in charge for the finished item of work.

Flooring with Vitrified floor tiles of Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles including seigniorage charges, etc., complete as per the directions of the Engineer in charge for the finished item of work. For Ground Floor

Flooring with Vitrified floor tiles of Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles including seigniorage charges, etc., complete as per the directions of the Engineer in charge for the finished item of work. For First Floor

Flooring with Vitrified floor tiles of Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles including seigniorage charges, etc., complete as per the directions of the Engineer in charge for the finished item of work. For Second Floor

Providing dadoing, skirting to internal walls to 15 cm height/risers of steps with Vitrified polished floor tiles 600X600 of 8 to 10mm thick length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water including seigniorage charges, etc., complete as per the directions of the Engineer in charge for the finished item of work. For Ground Floor

Providing dadoing, skirting to internal walls to 15 cm height/risers of steps with Vitrified polished floor tiles 600X600 of 8 to 10mm thick length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water including seigniorage charges, etc., complete as per the directions of the Engineer in charge for the finished item of work. For First Floor

Providing dadoing, skirting to internal walls to 15 cm height/risers of steps with Vitrified polished floor tiles 600X600 of 8 to 10mm thick length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water including seigniorage charges, etc., complete as per the directions of the Engineer in charge for the finished item of work. For Second Floor

Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete as per the directions of the Engineer in charge for the finished item of work.

Providing skirting to internal walls to 15 cm height/risers of steps with glazed red or white full body ceramic wall tiles of size 200 x 300 mm / 245 mm x 325 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water including seigniorage charges, etc., complete as per the directions of the Engineer in charge for the finished item of work.

Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for Internal walls for Ground Floor.

Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for Internal walls for First Floor.

Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for Internal walls for Second Floor.

Painting to new walls with 2 coats of acrylic interior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ liter over a base coat of appropriate cement primer of approved brand and shade making 3 COATS in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and ocnveyance of all materials to work site and all operations , incidental, labour charges etc complete for finished item of work as per SS911 INTERNAL WALLS. For Ground Floor

Painting to new walls with 2 coats of acrylic interior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ liter over a base coat of appropriate cement primer of approved brand and shade making 3 COATS in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and ocnveyance of all materials to work site and all operations , incidental, labour charges etc complete for finished item of work as per SS911 INTERNAL WALLS. For First Floor

Painting to new walls with 2 coats of acrylic interior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ liter over a base coat of appropriate cement primer of approved brand and shade making 3 COATS in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and ocnveyance of all materials to work site and all operations , incidental, labour charges etc complete for finished item of work as per SS911 INTERNAL WALLS. For Second Floor

Painting to new walls with 2 coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ liter over a base coat of appropriate cement primer of approved brand and shade making 3 COATS in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and ocnveyance of all materials to work site and all operations , incidental, labour charges etc complete for finihsed item of work as per SS911 EXTERNAL WALLS. For Ground Floor

Painting to new walls with 2 coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ liter over a base coat of appropriate cement primer of approved brand and shade making 3 COATS in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and ocnveyance of all materials to work site and all operations , incidental, labour charges etc complete for finihsed item of work as per SS911 EXTERNAL WALLS. For First Floor

Painting to new walls with 2 coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ liter over a base coat of appropriate cement primer of approved brand and shade making 3 COATS in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and ocnveyance of all materials to work site and all operations , incidental, labour charges etc complete for finihsed item of work as per SS911 EXTERNAL WALLS. For Second Floor

Providing stainless steel hand railing with 304 Grade stainless steel sections using 48.26mm OD pipes/ squares as styles/ verticals at required intervels, 48.26mm OD pipes/ squares as hand railing/ top sloped member and 3 Nos 17.145mm OD pipes/ squares as intermediate members or any other hand railing design specified by the Engineer in Charge including fabrication of stainless steel railing works using stainless steel welding rods, buffing, polishing, lacquer finishing for seamless finish including fixing the verticals by drilling the holes in the concrete/ granite/ tiled floor, grouted with suitable Resin anchor grout such as Lockfix-S of Fosroc or any equivalent chemical including cost of all materials and labour charges for finished item of work as approved and directed by the Engineer-In - Charge.

Supply and fixing of fully fixed glazed partition / Walls using of required aluminium sections infil with 12m thick toughned plain glass fitted with suitable Alumnium glazing clips and approved brand of silicon sealent including cost and conveyance of all materials, all leads ,labour charges for manufacturing, Cost of 12mm toughned glass, fixing in position using wooden blocks and sheet metal screw etc. to complete for finished item of work, as directed by the Engineer in charge. (Excluding the cost of Aluminium sections and glazing clips)

Supply of required standard aluminium anodised sections for fixing and infil with required thick glass for glazed parttion/Wall fitted with suitable Alumnium glazing clips including cost and conveyance of all materials, all leads, fixing in position and screw etc. to complete for finished item of work, as directed by the Engineer in charge. (Excluding the cost of glass)

Supplying and fixing aluminium composite cladding with skin material 0.5 mm thick aluminium sheet cover material natural polyethylene aluminium cladding panel fixed with extruded aluminium basis frame (50x25x1.5mm) angle cleats, weather sealants, rivets, GI brackets all as approved, using suitable bolts on structural steel work including necessary accessories complete in all respects including all scaffolding and labour charges etc., complete for finished item of work but excluding cost of structural steel fabrication, if any, ACP Cladding - 4 mm thk

20 mm thick plain cement mortar bands in cement mortar 1 : 4 (1cement : 4 sand) upto 300 mm in width including cost & conveyance of all materials, labour charges, leads, lifts, scaffolding and curing complete as per the directions of the Engineer in charge for the finished item of work.

Supply and fixing in position M.S. grills/Angles/gates of required size of approved design and quality. (for, gates, windows, hand railing in front of portico, retaining walls, Cable duct ) and painting with two coats of synthetic enamel paint of approved quality, make, colour and shade over one coat of red oxide, complete as per the directions of the Engineer in charge for the finished item of work.

Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of Hindustan / Neycer or Parry ware make with WHITE colour glazed with 'S' trap, Supplying and Fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 and Supply & fixing of PVC low level system parry ware, slim line with internal components & short bend: 8 Litres capacity single Flush and external fixtures complete as per the approved colour and directions of the Engineer in charge for the finished item of work.

Supplying & Fixing 550x400 mm- single C.P. Pillar cock Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 300 grams Seiko/ Esso or equivalent complete with standard CI brackets including wooden block as per the directions of the Engineer in charge for the finished item of work.

Supplying and fixing Pedestal for wash hand basin (HSW/ Parry/ Earthenware ) make including cost of all fixtures, labour for fixing as per the directions of the Engineer in charge for the finished item of work.

Supplying and fixing 19.05mm dia and 609.6mm long C.P. Towel rod of Ist quality including cost of brackets as per the directions of the Engineer in charge for the finished item of work.

Supplying and fixing NP Soap dish heavy type with NP Screws including cost & conveyance of materials and labour for fixing complete as per the directions of the Engineer in charge for the finished item of work.

Supplying and fixing TV Shape mirror with PVC frame size 609.6x457.2mm including cost & conveyance of materials and labour for fixing complete as per the directions of the Engineer in charge for the finished item of work.

Providing and fixing in position at all levels of the building under floors and against walls 110mm dia (6kg/cm2) PVC pipes of prince / sudhakar or any ISI brand make with specials such as junctions, with or without access doors as required and fixing cowls at top wherever necessary including excavation and refilling wherever required,, testing etc. complete as per the directions of the Engineer in charge for the finished item of work.

Supplying and fixing 110mm dia PVC bends including cost and conveyance, labour for fixing complete as per the directions of the Engineer in charge for the finished item of work.

Providing and fixing in position at all levels of the building under floors and against walls 75mm dia (4kg/cm2) PVC pipes of prince / sudhakar or any ISI brand make with specials such as junctions, with or without access doors as required and fixing cowls at top wherever necessary including excavation and refilling wherever required,, testing etc. complete as per the directions of the Engineer in charge for the finished item of work.

Supplying and fixing 75mm dia PVC bends including cost and conveyance, labour for fixing complete as per the directions of the Engineer in charge for the finished item of work.

Supplying and fixing of Ashirvad/Ajay/Astral flowguard or equivalent CPVC pipes and fittings to meet the requirement of ASTM-D 2846 and are produced in CTS(Copper Tube Sizes 1/2" ton 2" Ashirvad flowguard SDR 13.5 pipes are made from idential CPVC compounds having the same physical properties for hot and cold water(IS 15778:2007) for water supply line to earth pits / toilets including cost and conveyance of pipe, CPVC specials such as elbows, Tees concealing same in walls and floors by cutting 34.9/ 28.6/ 22.2/15.9 mm dia to be included grooves, packing, finishing after laying pipe in position as per the directions of the Engineer in charge for the finished item of work. 34.9 mm OD pipe SDR 13.5

Supplying and fixing of Ashirvad/Ajay/Astral flowguard or equivalent CPVC pipes and fittings to meet the requirement of ASTM-D 2846 and are produced in CTS(Copper Tube Sizes 1/2" ton 2" Ashirvad flowguard SDR 13.5 pipes are made from idential CPVC compounds having the same physical properties for hot and cold water(IS 15778:2007) for water supply line to earth pits / toilets including cost and conveyance of pipe, CPVC specials such as elbows, Tees concealing same in walls and floors by cutting 34.9/ 28.6/ 22.2/15.9 mm dia to be included grooves, packing, finishing after laying pipe in position as per the directions of the Engineer in charge for the finished item of work. 22.2 mm OD pipe SDR 13.5

Providing and fixing in position at all levels of the buildings PPR Ball Valve confirming to DIN standards 8077/8092 for water services for following sizes including jointing etc complete as per the directions of the Engineer in charge for the finished item of work. 32 mm dia Nominal Bore

Providing and fixing in position at all levels of the buildings PPR Ball Valve confirming to DIN standards 8077/8092 for water services for following sizes including jointing etc complete as per the directions of the Engineer in charge for the finished item of work. 25 mm dia Nominal Bore

Providing and fixing in position at all levels of the buildings PPR Ball Valve confirming to DIN standards 8077/8092 for water services for following sizes including jointing etc complete as per the directions of the Engineer in charge for the finished item of work. 20 mm dia Nominal Bore

Providing and fixing 101.6 mm dia PVC Nahani Trap/Floor trap of standard make including making connection to PVC pipes/waste water lines with cement concrete base for embedding traps in position, finishing up to floor level with water proof cement plaster with grating at top complete as per the directions of the Engineer in charge for the finished item of work.

Supplying and fixing of 12.7 mm NP stop cock Indian make heavy duty Seiko/ Senior/ Nice/ Senior/ Nice or equivalentincluding cost and conveyance, labour for fixing complete as per the directions of the Engineer in charge for the finished item of work.

Supply & fixing 12.7 mm brass bib cock Indian make heavy duty including cost and conveyance, labour for fixing complete as per the directions of the Engineer in charge for the finished item of work.

Supply and fixing of 12.5mm/15mm dia N.P bib tap Indian make 3heavy duty Seiko or equivalent make including cost & conveyance of all materials, labour charges, leads, lifts complete as per the directions of the Engineer in charge for the finished item of work .

Supply & Fixing of Bibcock cum Health Faucet with 1m long tube and wall hook of standard make, Chrome Finish with 7 years warranty including cost and conveyance, labour for fixing complete as per the directions of the Engineer in charge for the finished item of work.

Construction of Brick masonry chamber over the gully trap or peet valves & fitted with 304.8mm X 228.6mm size CI frame & Hinged cover as including cost & conveyance of all materials, labour charges complete for finished item of work as per the directions of the Engineer-in-charge

Construction of 457.2mmx457.2mm brick masonry in CM (1:6) man hole upto 914.4 mm depth and fitted with light weight 457.2 mmX457.2 mm CI frame and cover of 20 Kg weight including cost and conveyance of all materials, labour charges complete as per the directions of the Engineer in charge for the finished item of work.

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with of 1000 liters Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks etc complete as per the directions of the Engineer in charge for the finished item of work.

Supply and fixing of PVC 'T'of 110mm dia - 1No, PVC bend 110mm dia -1No, PVC Vent Cowl 110mm dia - 1No, PVC Ventilating pipe (4.5m), inlet and outlet pipes (2.0m each) of 110mm dia (4kg/cm2) and 914.4 x 457.2 mm CI Manhole frame and cover (Light Weight) 30Kgs- 1No for Septic tank including cost and conveyance of all materials, labour charges for fixing etc. complete as per the directions of the Engineer in charge for the finished item of work.

Supply and Run of 1 of 6.0Sqmm .FRLS/ FRLS-H / HFFR PVC insulated flexible Copper Cable (Finolex / RR kabel / Havells/KEI/ Polycab/ Gloster/ Goldmedal/ GM make) in existing pipe for run of DB to outside earth pit including giving connections, all labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building.

Supply and fixing of (8+12) 4 way TPN DB Horizontal with IP 43 (Legrand (Ekinox 3) / Schneider-A9/Hager -Novello+/ Seimens/Havells STADx/ Lauritz Knudsen (formerly L&T) -Newrange/Indo Asian-Opti Pro/ HPL (Techno)/ Anchor (Uno Plus)/ABB-ITUS make) protection for installation of 12Nos. 6-32A of SP outgoing MCBs and 2 Nos 63A 4 pole, MCB as incomer etc., (Legrand (Ekinox 3) / Schneider-A9/Hager -Novello+/ Seimens/Havells STADx/ Lauritz Knudsen (formerly L&T) -Newrange/Indo Asian-Opti Pro/ HPL (Techno)/ Anchor (Uno Plus)/ABB-ITUS of make) complete as per IS 8623; IS 13032; IEC 61439-3. including internal connection and labour charges for surface/Flush mounting and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building.

Supply, Transportation, laying and Termination of 70 Sq mm X 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I. Makes: Torent / Universal / Unicab / Havells / Finecab / KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt /KEC Asian Cables/Orbit/Avocab /Gemscab /Batra Henlay from LT panel to DB including internal connection and labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work.

Supply and fixing of 25 mm outer dia (1.60-1.80) mm thick mediium grade with IS: 9537 part 3 regid PVC pipe (ISI mark) ( Precision/ Universal & Marudhar/ VIP / GoldMedal / Million plast / GM / Sudhakar / Polycab/ Anchor/ Polyline/ Orbit/ AKG/ Beljin makes) concealed in walls for wiring with all required accessories incl masonry work and labour charges etc., complete as per the directions of the Engineer in charge for the finished item of work.

Supply and fixing of 32 mm outer dia (1.90-2.10) mm thick mediium grade with IS: 9537 part 3 rigid PVC pipe (ISI mark) ( Precision/ Universal & Marudhar/ VIP / GoldMedal / Million plast / GM / Sudhakar / Polycab/ Anchor/ Polyline/ Orbit/ AKG/ Beljin makes) concealed in walls for wiring with all required accessories incl masonry work and labour charges etc., complete as per the directions of the Engineer in charge for the finished item of work.

Supply and Fixing of 8 Module GI Metal box with Modular Cover Frame 1Nos.-6A Switch, 1No.-20A Switch,1No.-16A Socket and 2Nos.-6A Sockets of Legrand (Myrius/Lyncus) / make fixed on wall with all required accessories and labour charges etc., complete. for Power points at System table including internal connection and labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work.

Supply and Run 2 of 1.50Sqmm FRLS/ FRLS-H / HFFR PVC insulated flexible copper cable 1100V grade as per IS: 694/1990 &IS:17048/2018 specification for copper cable (Finolex / RR kabel / Havells/ KEI/ Polycab/ Gloster/ Goldmedal/ GM make) in existing pipe for point wiring as per colour code of wires including giving connections and labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building.

Supply and Run of 3 of 4.0Sqmm FRLS/ FRLS-H / HFFR PVC insulated 1100V grade as per IS : 694 / 1990 specification for Copper cable of Makes: Finolex / RR kabel / Havells/ Finecab/ KEI/ Polycab/ Gloster/ Goldmedal/ GM/ Fortune Arrt/ Anchor/ Million/ APAR (Anushakthi) in the existing pipe for AC Wiring including giving connections, all labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building.

Supply and Fixing of 12 Module GI Metal box with Modular Cover Frame, 9 Nos.-6A Switches, 1No.-20A Switch and 1No.-16A Socket of Legrand (Myrius/Lyncus) make fixed on wall with all required accessories and labour charges etc., complete. for Rooms including internal connection and labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work.

Supply and fixing of ISI marked 25 mm outer dia (2.00-2.20) mm thickness mediium grade with IS: 9537 part 3 regid PVC conduit of makes : Precision/ Universal & Marudhar/ VIP / Gold Medal / Million plast / GM / Sudhakar / Polycab/ Anchor/ Polyline/ Polycab/ Orbit/ AKG/ Beljin/ Vasavi/ DEC makes) on wall surface for wiring with all required accessories incl masonry work and labour charges etc., complete as per the directions of the Engineer in charge for the finished item of work.

Supply, Transportation and Fixing of 40W, 1100mm length Linear Profile LED Luminaire recessed/surface mounted with Aluminum extrusion, powder coated cover, input voltage AC 90-270 volts with PF>0.95, with high power LEDs, having system efficacy of >=100 lumens / watt, surge protection: 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete including fixing of 23W Linear light duly recessed in the ceiling/surface mounted by hanging from ceiling with necessary mounting arrangements, jointing kit, connecting wire leads etc., and all accessories, giving connections a) LUMINAIRE MAKE : Phillips (Pureline Slim) / GEVenture/ Crompton / Wipro / Bajaj / Havells (Dustello) b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/LG and all labour charges etc., complete with earth connection and not less than two years warranty including all connection and labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work.

Providing earth electrode of low carbon steel rod, UL listed of 17.2 mm dia, 3 Mtr long, coated with copper of 254 microns thickness, CPRI tested for short time current withstand test of 25 kA, coating thickness, environmental test (Salt Mist Test), Bend test, Tensile strength, Yield / tensile ratio, Electrical Resistivity test, complete with clamps and 2 bags of (Earth plus ULTRA /TIRUMALA) high grade earthing compound IEC 62561-7 complaint Eco-friendly, Maintenance free, anti-corrosive, lead-free, super conductive, mineral based high-grade earthing compound, to enhance soil conductivity. With resistance <0.20 ohms-meter, should be leach proof & Sulphur free complete with earth inspection chamber of dimensions: width: 320 mm x 320 mm, Height : 192 mm, weight : 30 Kgs, Load bearing capacity : 5000 Kgs including all connection and labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work.

Supply and fixing of 48" (1200mm) Sweep 5 star rated BLDC (Brush less Direct Current) Ceiling Fan with double ball bearings, input voltage 230V AC converted to 24V DC, power input not more than 30W, air delivery not less than 220 cubic meter/min and a minimum service value of 7.0, with remote of makes: Atomberg(GV2 )/ Halonix(Plasma) /Havells(Efficiencia Neo)/ Crompton (EN Groove)/ Superfan(E281)/ RJP(Ecowise) /GM (Excel 25 Pro)/ Goldmedal (OPUS) models with suitable down rod covered with flexible pipe, with all standard accessories including cost of all fittings and fixtures, labour for fixing at all positions of building giving electrical connections with necessary tools complete as directed by the Engineer in charge for finished item of work.

Supply and Fixing of 3 Module GI Metal box with Modular Cover Frame 3Nos.-6A Switch of Legrand (Myrius/Lyncus) / make fixed on wall with all required accessories and labour charges etc., complete. for Wash rooms including internal connection and labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work.

Supply, Transportation, laying and Termination of 4 core, 10 Sq mm ISI marked, PVC insulated and sheathed FRLS/FRLS-H round copper cable for voltage up to 1100V as per IS 694/1990 Makes: Finolex / RR kabel / Havells/ Finecab /KEI/Polycab/ Gloster/ Goldmedal/GM// Fortune Arrt/Anchor /Million/Sudhakar/Orbit/Batra Henlay. from Main LT to DB including internal connection and labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work.

Supply and fixing of 8 Way SPN DB with IP 43 Protection suitable for 4Nos 6-32A S.P out goings and for 1 No 4P 32A MCB as Incommer etc complete as per IS 8623; IS 13032; IEC 61439-3. etc complete of makes Legrand(Ekinox 3) / Schneider-A9/Hager -Novello+/ Seimens/Havells STADx/ Lauritz Knudsen(formerly L&T) -Newrange/Indo Asian-Opti Pro/ HPL (Techno)/ Anchor (Uno Plus) /ABB-ITUS with IP-43 protection suitable for supply of 32A, 4P MCB as incomer and 10KA-6-32A range SP_ MCBs of make Legrand-DX3 / Schneider-A9/Hager-h3/Siemens-5SX4/ Havells STADx / Lauritz Knudsen(formerly L&T)-AU/Indo Asian-Opti pro/ HPL (Techno) /Anchor (Uno Plus)/ABB-SB200 as out-going including internal connection and labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building for surface/ flush mounting.

Supply, Transportation, laying and Termination of 2Cx1.5 sq.mm of XLPE/PVC insulated & PVC sheathed armoured cables of 1.1 KV grade with copper conductor as per IS 7098 Part-I -1988 of Makes: Torrent / Universal / Unicab / Havells / KEI /Polycab/Gloster/Orbit/ Paragon/RR Kabel / KEC Asian Cables /Rhino /Pawancab/AKG/LS cable/ Polywires/South king/Avocab/Gemscab/Batra Henlay including all connections and labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work.

Supply and instllation of addressable Optical smoke detector with LED with standard base having capacity of min 126 address combination. Operating temperature -40°C to 70°C &Humidity 0-95%. The detector should have polling 360 degree viewable LED with 5 class approved response modes all approved with the relevant standards, drift compensation and transient rejection. The detector shall have facility to mount in different comprehensive environment like Hostile environment, precious storage, warehouse and normal working environments. The detector should have a self-locking mechanism and requires a special tool to remove this detector. The detector should have a hard address inside the base. The detector must have nonvolatile memory to write the installation date & site codes. The detector should be made of fire retardant material & should be melt above 100 degree C. The detectors must be openable for the cleaning of dust whenever required. All the other specs should be as per the specifications. Makes: Siemens / Morley / Honeywell including labour charges and cost of materials etc. complete as directed by the Engineer in charge for the finished item of work.

Supply, Installation, Testing & Commissioning of Analogue Addressable loop powered Sounder & Beacon with inbuilt isolator and having Min 15 distinct sound patterns/ multitone to indicate Exit doors and direct occupants for safe and fast evacuation and 100dB output with minimum 1Hz Frequency flash rate designed for IP65 requirements and approved to operate in –10°C to +55°C temperature, complies with the essential requirement of the EMC Directive to be supplied with Junction Box, Glands and other mounting accessories for proper installation Makes: Siemens / Morley / Honeywell/ Ravel/Seaara/Apollo/Cooper including labour charges and cost of materials etc. complete as directed by the Engineer in charge for the finished item of work.

Supply, Installation, Testing & Commissioning of Dust and Vermin proof (Resettable) addressable analogue Manual call boxes along with Isolators inbuilt having front reset mechanism with 170° viewable LED and can be viewed from the distance of 7 M. also have inbuilt isolator having operating temperature from -40°C-70°C to initiate audio visual alarm in case of Human detection of fire. The manual call point must be indoor type with IP 44 rating. The call point must be resettable type without break glass. Makes: Siemens / Morley / Honeywell/ Ravel/Seaara/Apollo/Cooper including labour charges and cost of materials etc. complete as directed by the Engineer in charge for the finished item of work.

Supply, Installation, Testing & Commissioning of Loop isolation module which consists of LED. This LED shall be mounted with in a round polycarbonate encloser. Isolator Base for Isolators. Makes: Siemens / Morley / Honeywell/Ravel/Seaara/Apollo/Cooper. including labour charges and cost of materials etc. complete as directed by the Engineer in charge for the finished item of work.

Supply, install, test and commissioning of 1 loop addressable peer to peer Networkable analogue addressable type fire alarm control panel with minimum 1500 Character / 240X64 Pixel / 7inch Touchscreen graphic LCD display. The panel should be equipped with sufficient numbers of loop with 20% spare capacity, with each networkable intelligent fire alarm Control Panel having SLC with capacity of min 250 detectors/ devices in any combination (Min 120 Detector) with key pad, dual flash-based microprocessor technology, inbuilt USB Port for upload and down load the configuration tools, RS232 serial port for direct PC or modem connection, inbuilt NAC's, min 20 programmable Zonal LEDs and operates on 240V AC + 10% with 50 Hz with built in charger. The panel shall have fire, fault relays, option of BMS integration MODBUS/ BACKNET, graphical software for provision of TCP/ IP modules, Remote Access, Class 'X' wiring with provision of both class 'A' and class 'B' wiring in the SLC circuit, user friendly with communication facility to monitor & control the FACPs from a single window. The panel shall be suitable for minimum of 5000 event record facility, event fetch from FACP facility and the single panel shall be suitable for min 2000 fire zones and 200 Panels/ Nodes in one network with all other accessories required to successfully run the system. (The System cost shall be included of all necessary cards, modules, Panel enclosure, CPU and associated accessories to complete the system design).Makes: Siemens / Morley / Honeywell/Ravel/Seaara/Apollo/Cooper including labour charges and cost of materials etc. complete as directed by the Engineer in charge for the finished item of work.

Supply, Installation, Testing and Commissioning of Electric Traction Passenger Lift of Makes Johnson Lifts ( SUKRANT / 10Passenger Lift / 680Kgs/1.25 Speed / 3 Floors/ 3 Stops / Stainless Steel (1.5 Mm) Car Cabin) with Automatic centre opening glass enveloped SS 304 sliding doors, suitable for 3 (Ground + 2 Upper) Floors of 800 mm wide x 2000 mm high made from SS 304 grade sheet of 1.5mm, thick in hairline finish for car and all landing doors with SS door architraves/frames• Lift car enclosure made from SS 304 grade sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights,blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc.COP with SS face plate having metallic push buttons with Braille Code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with/without attendant key switch, OWD with audio-visual alarm, VAS in Telugu & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor Clear Car size of standard size as per field condintion • LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille Code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port, control panel duly wired with proper size & strength copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class • ARD complete with necessary SMF VRLA batteries • Fireman controller having fireman switch at fire Landing, Lift Machine of Gearless PMSM of suitable kW with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength • Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work Minor civil work for alteration if any and erection of door frames and accessories, erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails fixing of girders for mounting lift machine etc. complete as per specification no. LFT. •Lift shaft size of standard size and etc., complete as per the directions of the Engineer in charge at site for finished item of work. (For Record house in the premises of Vidyut soudha)

Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded alluminium housing and polycarbonate cover, input voltage AC 220 - 260 Volts with high power LEDs having system efficacy of >=100 lumens/ watt, PF>0.9, Surge protection: 2KV,THD<15%,with in built driver and frosted cover CCT: 300K - 5700K, minnimum CRI>70, Etc complete with earth connection and not less than two years warranty of makes a) LUMINAIRE MAKE : Phillips / GE- Venture / Crompton / Wipro / Bajaj / Havells / Halonix/ Jaquar/ HPL/ GM / GreenLites / Gold Medal/ Eveready/ Rhino/ Panasonic b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/ EVERLIGHT on ceiling or wall with all accessories including giving connections, all labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work.

Supply, Fabrication, Erection and commissioning of LT Main Panel board made of MS angles and sheet to accommodate (using Lauritz Knudsen (formerly L&T) - D shine / Schneider-CVS/Legrand –(DP X3/DRX)/ Siemens- 3VL / Hager-h3/C&S -Winbreak/HPL-Techno /ABB (Formula DSP)make accessaries ) with 1No. 125 amps 4 pole MCCB , 3No. LED Indicator Lamp, 5Nos 40-63 amps 4P MCB, Electrolytic grade aluminum bus bar , 3.5 core x 70 sq.mm one end termination brass gland with alluminum lugs, Supply and fixing of copper lugs upto 16Sqmm, 16sqmm copper flexible cable for wiring, 105/100 x 50 mm Supply and fixing of DLP PVC Mini trunking, 8 SWG Copper wire, earthing, Fabrication and erection of 16 guage CRCA sheet steel enclosure for power control cubical panel/boxes including cost and conveyance of all accessories, cost and coneveyance of all materials, labour charges for giving connections etc complete as directed by the Engineer in charge for the finished item of work. (But excluding the cost of MS angles)

GST applicable on total value of above civil works