Tender for prov. SOP for improvement of LWSS karsog and its adjoining areas to make to the level of NAC (urban Standard ) by providing 22 KV HT line to proposed 25 KVA, 22/0.4 kv s/stn at Baral in Tehsil Karsog Distt. Mandi(HP) Phase -1st in E Sectio

Erection Charges

Add Erection Charges as per Cost Data 2023-24

Add extra manual carriage charges for an Average Lead 1.000 Km. from Road Head to Site of Work as per Cost Data 2023-24. AVERAGE LEAD -0.100 Kms.

Supply Part ( 22/.4 KV 25 KVA Transformer )

Prov. 22/0.4 kV 25 KVA Distribution Transformer

Prov. Energy Meter (3-Phase, 4-Wire) DLMS compliant 200/5 A CT Type for 100 KVA Transformer

Prov Steel Tubular Poles (9 m, Working Load > 200 kgf/m²)

Prov. RCC Muff with C:C filling 2000 mm length

Prov. M.S.C.I. X-Arm (100x50x6 mm),Length 2800 mm X 4 Nos.

Prov. C.I. X-Arm (75X40x6 mm) length 2800 mm X 4 Nos. for supporting D O Fuse Unit & G O AB Switch

Prov. C.I. X-Arm (100X50x6 mm) length 460 mm X 2 Nos. for supporting Main Chanel of transformer.

Prov. M.S. A.I X Arm (50x50x6mm) Length 2800 mm x1 for L A's + 2 Nos. Distribution Box.

Transformer Bed, Belting & Knee Bracing

M.S. Angle Iron (50X50X6 mm), Length: 2800 X 4 Nos.

M.S. Angle Iron (35X35X5 mm), Length: 460 X 2 Nos.

Prov. G.O. AB Switch Unit ( 22 kV, 400A, 25kV)

Prov. Surge Arrester, (18 KV, 5KA) Station Class (Porcilain Type) L.A.

Prov. 22 kV Disc Insulator set (Comprising 1 No. Disc. (Porcilain, BS, 12kV,90kN) i/c Dead End Clamps etc.)

Prov. Stay Set complete

Prov. Stay Wire 7/3.15 mm ( @ 6.0 kg Per Stay Set)

Prov. Pipe Earthing

Prov. LT Distribution Panel Box with With MCCB(160A,10KA, 4P, 1No) &SFU(32A, 5No,rewirable)

Prov. ACSR Cond. 6/1/3.35 mm (50 mm2)

Prov. Half Clamp with Nuts & Bolts (M.S. Flat 50X6 mm)

Prov. Full Clamp with Nuts & Bolts (M.S. Flat 50X6 mm)

Prov. M.S. Nuts and Bolts of various sizes (galvanised/ Coated) (Preferably 16 mm ɸ or more (With Flat & Spring Washers))

Prov. Aluminium. Thimble

Prov. Aluminium. Thimble

Prov. Danger Plate

Prov. LT Cable (3.5 Core) 70 mm2

Prov. Aluminium Paint.

Prov. L.T Switched Capacitors 9 -KVAr for 100 KVA (rate per KVAr)

Prov. Chain Link Kencing, Angle Iron, Gate etc. for transformer Fencing. ( As per HPSR )Also include Civil work (Earth work in excavation by mechanical means (hydraulic excavator)/ manual means in foundation trenches or drains ( not exceeding 105 m in width or 10sqm on plan), including dressing of sides and ramming of bottoms, lifts upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50M(All kinds of soil).Providing and lying in position cement, concrete of specified grade excluding the cost of centering and shuttering-All work uotp plinth level :1:4:8(1 Cement: 4sand :8 graded stone aggregate 40mm nominal size). Providing and lying in position cement, concrete of specified grade excluding the cost of centering, reinforcement, finishing and shuttering-All work uotp plinth level :1:1.5:3(1 Cement: 1.5sand :3 graded stone aggregate 20mm nominal size).Steel work welded in built upsections/ framed work, including cutting,hoisting,fixing in position and applying a priming coat of approval steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings,brackets,gates and similar works.Providing and fixing G.I chain link fabric fencing of required width in mesh size 50X50 mm including strengthening with 2mm dia wire or nuts,bolts and washers as required complete as per the direction of Engineere-in-charge. Made of G.I wire of dia 4mm.Providing and fixing ISI marked M.S pressed butt hinges bright finished with necessary screws etc. complete (100X58X1.90 mm).Also providing and fixing ISI marked oxisdised M.S. sliding door bolts with nuts and screws etc. complete:250X16 MM.

Erection part ( (22 KV H.T Line on ST Pole) )

Erection of Steel Tubular 9.00 Mtrs.Single Pole Str. a/w allied fitting

Erection of Steel Tubular 9.00 Mtrs. D/Pole Str. a/w allied fitting

Erection of H.T. Stay Set : Digging of pit, fixing of stay rod, nozzeling & tightening And filling of pit

Earthing :Digging of pit, Fixing of G.I. wire to the earthing system and filling of pit

Fixing of Jumper

Sagging of Conductor 1.00 Km. Single G.I. Wire/ AAAC/ACSR 20/25 mm2 : Laying, Stringing, Sagging & binding with insulator

Sagging of Conductor : 1Km Single ACSR/AAAC 6/1/3.35mm (50 mm2) : Laying, Stringing, Sagging & binding with insulator

Add extra manual carriage charges from Road Head to Site of Work for an Average lead 0.100Km.

Supply part of HT Line

Prov. Steel Tubular Pole 9.00 mtr Working Load >227KG

Prov. RCC Muff with Concrete Filling 2000mm length.

Prov. ACSR Cond.6/1/3.35mm ( 50 mm2)

Prov. G.I.No. 6/ 8 SWG for Earth wire for S/T Pole

Prov. C.I.X-arm (100x50x5mm), Length(1500) for D. Pole Str.= 1.500 x 6

Prov. C.I. X-arm(100x50x5mm),Length: 2800x12 D.Pole Str.

Prov. C.I.X-arm(100x50x6mm), Length : 3000x5 for Gaurding

Prov. A.I Knee Bracing set (50x50x5mm), Length (2x850) for Single Pole = 850 x 2x4

Prov. Belt Set (X-Bracing Set)M S A. Iron (50x50x6mm) Length:1800x2x4

Prov. Belt Set (X-Bracing Set)M S A. Iron(50x50x6mm) Length: 2125x2x4

Prov. Stay Set Complete in all respect i/c Guy Assembly with Helically Fitting

Prov. Stay Wire 7/3.15 mm/ 7.400 mm ( @ 6.0 KG /9.00 Kg per Stay Set)

Prov Pipe Earthing Set complete

Prov. Full Clamp with nuts & bolts M.S. Flat 50x6 mm

Prov. Half Clamp with nuts & bolts M.S. Flat 50x6 mm

Prov. Earth Hook for Earth Wire

Prov. Danger Plate (250x200x1.6 mm)

Prov. Nuts & Bolts Of various sizes ( Gaivanised/ Coated) ( Preferably 16 mmɸ or more with flat and spring washers)

Prov. Barbed Wire

Prov. Alluminium Paint

Prov. 22 KV G.O. AB Switch Unit (11 KV, 400A, 25 KA

Erection part (3 Phase Lt Line )

Erection of Steel tubular pole 9mtr Long:Digging Of Pit,Drilling Of Holes In Pole X-Arm ,Erection Of Pole,Erec. Of X-Arm ,Shackle Insulator,Filling Of Pit And Ramming, complete in all respects

Fixing of Jumpers: Fixing of dead structure Jumpers Complete in all respects

Erection of LT Stay Set:-Digging Of Pit,Fixing of Stay Rod,Nozzeling & Tightening complete in all respects

Erection of Earthing Set:-Digging Of Pit,Fixing Of GI Wire To The Earthing System,Filling Of Pit complete in all respects

Sagging of Conductor . Single G.I. Wire/ AAAC/ACSR 20/25 mm2 : Laying, Stringing, Sagging & binding with insulator , complete in all respects

Sagging of Conductor : Single ACSR/AAAC 6/1/3.35mm (50 mm2) : Laying, Stringing, Sagging & binding with insulator complete in all respects

Add Extra manual carriage for 1.00 Km. average lead from road head to site of work. Average lead= 0.100 Km.

Supply part of LT Line

Prov. Steel Tubular Pole 9.00 mtr Working Load >227KG

Prov. R.C.C. Muff (2000 mm) with C. C. 1:2:4 for filling

Prov ACSR Cond. 6/1/3.35 mm (50 mm2)

Prov. G.I. Wire 8 SWG Earth wire

Prov. Shackle Insulator

Prov. D-Iron

Prov. L.T Stay Set

Prov. Egg Insulator i/c Starp for Egg Insulator

Prov. Earth Knob

Prov. L.T. Earthing

Prov. M.S. Nuts & Bolts off size@25kg for 3 Ph.

Prov. Alluminium Paint

Prov. PVC Spacer for 3 Ph.

Prov. C.I. X-Arm (75X40x5 mm) length 1500 mm .

Prov. A.I Knee Bracing set (50x50x5mm), Length (2x450) for Single Pole

Prov Full Clamps [ 2 No for A.I + 1 No for Stay Set]

M/s M.S Electrical and Engineering Works (BID ID -516623)

M/S BHARDWAJ ELECTRICAL CO. (BID ID -517379)

Koyla Engineering Works (BID ID -517367)