SPECIAL REPAIR OF BLDG NO T-50 AT RUDRAPRAYAG UNDER GE 871 EWS

Amount

Dismantling of wall and ceiling boards (fibre, pulp, insulation, plywood etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

Dismantling of framed work timber scantlings 40 sq.cm and over in section, in any position complete all as specified and directed

Dismantling of framed work of fillets, rails, posts, rafters, purlins, etc under 40 sq.cm in section complete all as specified and directed

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of concrete block walling, RR masonary built in cement mortar including all quoins arches pillars etc and pre-cast block walling etc complete all as specified and directed.

Demolition of reinforced cement concrete of any description of any position not otherwise specifically provided for man hole cover slab complete all as specified and directed.

Taking down steel chowkats or frames n exc 1.5 sqm with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down steel chowkats or frames exc 1.5 sqm but n exc 4 sqm with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down cement plaster on any description including scrubbing down with water and prepare to receive new plastering in wall complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Excavation in trenches n. exc 1.5m and n. exc 1.5m depth for foundations, shafts, well, cesspits manhole, pier hole etc n.exc 10 sqm on plan and getting out ant type of soil complete all as specified and directed.

M&L for cement concrete 1:4:8 type D2 (40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed..

M&L for RCC M-25 (design mix using 20 mm graded stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M&L for RCC M-25 type B1 ( 20mm graded stone aggregate) for beam, cantilevers, bressummers lintel over 1.5 mtr span etc complete all as specified and directed.

M&L for RCC M-25 (Design Mix) ( 20mm graded stone aggregate) for chajjas etc complete all as specified and directed.

M&L for DPC 40mm thick in cement concrete 1:2:4, type B-0 to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 (12.5 mm graded aggregate ) bed or bedding layer of 25mm thick in laying floor finishes complete all as specified and directed.

M&L for Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, over 15mm thick screed bed in CM 1:6 as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

All as per Item No. 20 here-in-before but on vertical surfaces such as skirting, dados and risers to steps over and including 10mm thick backing coat in CM 1:4 complete etc set ,jointed in neat cement slurry and pointed to match in white or coloured cement to match complete all as specified and directed.

M&L for Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.09 but not exceeding 0.11 sqm, over 15mm thick screed bed in CM 1:6 as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 350X250X7 mm / 450X350X7 mm thick over and including 10 mm thick rendering in CM 1:4 as in backing coat of tiles set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

M&L for Prepolished chequered cement concrete tiles 30cmx30cmx25mm thick, set, jointed and pointed and in need cement slurry in floor with grey cement and pigment and including over screed bed or bedding layer of mortar 20 mm thick laying floor finished in cement mortar 1:6 complete all as spd and as directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded aggregate) and finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as specified and directed.

M&L for precast cement concrete cover slabs (1:2:4) type B1 (20mm graded agg) set in CM 1:4 for manholes etc all as specified and directed.

Use & waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter flat fair finished surfaces complete all as specified and directed.

Use and waste for formwork to chullah hoods, chajjas, troughs and similar items including edges in flat rough finished surfaces complete all as specified and directed.

Use and waste for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports over hangs etc.complete all as specified and directed.

M&L for TMT steel bars in reinforcement 10mm dia and over cut to length bent to shape required including cranking binding spirally, hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for TMT steel bars in reinforcement 5mm dia and over up to 10mm dia in stirrups cut to length bent to shape required including cranking binding spirally, hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for precast cement concrete 1:3:6 type C1 using 20mm graded aggregate as in solid building blocks, exc. 10cm in width and setting in CM (1:4) complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated soil to a dist n.exc. 50m and depositing where directed at a level n.exc.1.5m above the starting point all as specified and directed.

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed at a level n.exc.1.5m above the starting point all as specified and directed.

M&L for precast cement concrete 1:3:6 type C1 using 20mm graded aggregate as in solid building blocks, exc. 10cm in width and setting in CM (1:6) complete all as specified and directed.

M&L for precast cement concrete type C1, 1:3:6 (using 20 mm graded crushed stone aggregate) as in solid building blocks or slabs 10 cm thick (with plain or interlocking joints as directed setting in CM (1:6) complete all as specified and directed.

M&L for PCC (1:2:4) type B1 using 20 mm graded aggregate for coping including necessary formwork complete all as specified and directed.

Supply only water proofing compound

M&L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces with CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces with CM (1:4) finished even and smooth without using extra cement with WPC @3% by weight of cement complete all as specified and directed. Note : WPC Shall be measured and paid separately

M&L for Preparing new plaster surface apply two coat of distemper oil emulsion over a coat of 3 mm thick wall care putty complete all as specified and directed.

M&L for preparing new plaster surface apply two coat of cement base paint over a coat of alkali resistant primer on external walls complete all as specified and directed.

M&L for pressed steel frames for doors size 125x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed

S&F for 35mm thick 2nd class hardwood for Glazed skeleton shutters for door open rebated and prepared to receive glass gauge etc. (with sash bars) edges of framing plain, chamfered or rounded , fitted with cuts and mitred beads for securing glass etc. sizes of members of shuttered as specified in ssr part- I section -8 clause 8.23 (b) complete all as specified and directed.

M&L for 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

S&F for Solid PVC door frame of size 50 mmx47 mm made out of 5 mm plain colour PVC sheet re-inforced with M.S square tube, supplying and fixing in opening as per specification and drg complete all as specified and directed.

S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour of PVC sheet for top rail lock rail and bottom rail, on either side & gap insert for top rail bottom rail panelling of plain colour PVC sheets to be fitted in MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F for Steel ventilators with centre hung shutter including two pair of brass cup pivots catch spring and pulley wheel complete all as specified and as directed.

S&F for powder coated aluminium frame & Shutters for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F for 4.8mm thick sheet glass of ordinary quality and glazing fixed to aluminium shutters in square n.exc 0.5 Sqm in each pane complete all as specified and directed.

M&L for rubber beading for fixing glass panes in aluminium frame work complete all as specified and as directed.

S&F for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.

S&F Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed in Aluminium(Die cast body) complete all as specified and directed

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L for preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

M&L for preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed

S&F for mild steel butt hinges 100mm size of medium weight complete all as specified and directed.

S&F in repairs powder coated steel peg set having 06 Nos spikes fixed to wall complete all as specified and directed (Make as approved by GE).

S&F for 200mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F for 150 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F for 150 mm long Extruded aluminium alloy handles, fabricated type., anodised complete all as specified and directed.

M&L for 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed

S&F for Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor (140mm size) complete all as specified and directed

S&F for mild steel rolled sections as in roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. ( Fe 410-W (Gde E-250) quality A) complete all as specified and directed.

S&F for rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates ( Fe 410-W (Gde E-250) quality A) all as specified and directed.

S&F for plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment using Fe 410 -W (Gde- E- 250) quality- A with riveted bolted or welded attachment complete all as specified and directed.

M&L for mild steel screw bolts (machine made) 5 to 10mm dia of neck with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed and to be fitted with washers and one hexagonal or square nut n exc 5 cm long complete all as specified and directed.

S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of approved colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of approved colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F for frame work for suspended false ceiling GI exposed ceiling suspension system of grid size 600mm/600mm with main runner 38mmx24mm, cross tee 29mmx24mm and wall angle 24mmx24mm including 6 mm dia GI/MS bar hanger fixing with steel dash fastener or iron purlins from the roof with adjustment clip providing position for light fixture etc all as specified and directed.

S&F for false ceiling of Everest designer boards of size 595mm x 595mmx4mm thick fixed on GI snap grid, complete all as specified and directed.

M&L for prepration of old painted steel surfaces over 10cm width or girth and applying a coat of synthetic enamel paint complete all as specified and directed

S&F in repair Vitreous china wash hand basin (550X400mm) white, flat back excluding taps, waste chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S&F in repair for Vitreous China wash down water closet pan (pedestal pattern) complete all as specified and directed.

S&F in repair 10 liters PVC valveless, symphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including bracket complete all as specified and directed.

S&F in repair bib taps, cast copper alloy chromium plated fancy type with crutch or butterfly handle screwed down, fancy type chromium plated screwed for iron pipe or for brass ferrule and fixed of 15mm bore size complete all specified and directed .

S&F in repairs 15 mm bore angle valve/stop cock cast copper alloy chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe all as specified and directed.

S&F in repair for 15mm bore brass chromium plated WHB mixer for mixing hot and cold water screwed down for iron pipe and fixed to wall complete all as specified and directed.

S&F in repair brass Chromium plated shower roses of 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S&F for PVC connection 15mm dia and 600mm long complete all as specified and directed.

S&F in repairs soap dish Size 160x160x90mm fixed with chromium plated brass screws. complete all as specified and directed.

S&F in repair for CP towel rail of 20mm dia with hook 600mm long complete all as specified and directed.

S&F for PVC (SWR) 'S' trap bore of 125/110 mm complete all as specified and directed.

S&F for PVC (SWR) pipes 110 mm dia single socket in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F for PVC (SWR) bend of any radius of 110 mm dia complete all as specified and directed.

S&F for CP Grating 100 mm fixing with white cement complete all as specified and directed

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store of 15mm dia bore size complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store of 20 mm dia bore size complete all as specified and directed.

M&L for GI tubing of medium grade with fittings and fixed complete to walls or laid in floors, bore of pipe 15 mm bore size all as specified and directed.

M&L for GI tubing of medium grade with fittings and fixed complete to walls and ceilings or laid in floors, bore of pipe 20 mm dia bore size complete all as specified and directed.

Dismantling water tanks of 500 Litre capacity and removing to store complete all as specified and directed.

S&F for rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I of capacity 500ltrs including 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball and nipple screwed for iron pipe and fixed complete all as specified and directed.

S&F for Sand cast iron soil, waste and vent pipes of dia 100mm bore in any length with or without ears, with lead joints, fixed to walls complete all as specified and directed.

M&L for cast iron soil, waste and vent pipes(sand cast), in any length with or without ears, with cement joints, laid in trenches or in floors all for 100 mm bore all as specified and directed.

M&L for Concrete bed to 100mm dia drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L for PCC 1:2:4 type B-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in surface channel and drain complete all as specified.

Extra for forming fair finished drain and channel 30 cm inner girth in cement concrete using extra cement in forms mould mitred/stopped ends complete all as specified.

S&F for 15mm bore Health faucet with CP flexible pipe of 90cm long incl necessary fittings complete all as specified and directed .

Taking down copper/aluminium point wiring (light, fan, socket or power) including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings and removing materials to store for keeping in safe custody or for taking into credit (credit for fittings shall be made separately) and making good disturbed surfaces of walls, floors, etc all as specified and directed

Taking down of unserviceable distribution boards alongwith MCB complete all as specified and directed.

Taking down of unserviceable MCB complete all as specified and directed.

M&L for point wiring for one light/ bell/ fan point controlled by one, one way switch with 1.5 Sqmm size, PVC insulated and unsheathed 1100 volts grade, single core stranded (multistrand) copper conductor (FRLS) PVC cable drawn into & including medium grade PVC conduit (not less than 20mm outer dia) with all fittings and accessories fixed concealed (including chase cutting in brick/ stone masonry walls for fixing conduit and plastering and whitewash/colouring the external surface and matching the same with existing surface) and sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets & fan regulators etc with 3 mm thick plastic laminated sheet covers fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.5 Sqmm multistranded copper conductor cable earth wire and connected to earth dolly complete all as specified and directed.

All as per item No. 105 herein before but one 3 pin socket outlet 5 Amps independent board controlled by one, one way switch.

All as per item No. 105 herein before but one 3 pin socket outlet 5 Amps on the same board.

All as per item No. 105 above but with 4 Sqmm two single core and 4 Sqmm one single core as earth wire for 15/16 Amps socket out let, 3 pin on independent board.

S&F switch piano, flush type single pole 15/16 Amp complete all as specified and directed.

S&F switch piano flush type single pole, one way 5/6 Amp complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin, 5/6 Amp flush type complete all as specified and directed.

S&F socket outlet 2 in 1, 5 pin, 5/6 and 15/16 Amp flush type complete all as specified and directed.

S&F ceiling rose surface bakelite 2/3 terminal 65 x 25 mm dia poly carbonate isolated with base plate complete all as specified and directed.

S&F lamp holder angle type PVC/Poly carbonate type insulated body with back plate suitable for batten/wall fitting complete all as specified and directed.

S&F LED Bulb 9 Watt, cool day light 230/240V AC supply complete all as specified and directed.

S&F LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core 23/0.0076 flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED lights fitting 1x 10W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core 23/0.0076 flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED bulkhead light fitting 10W luminaires including LED driver holder connecting up with three core flexible copper conductor cable suitable size complete all as specified and directed.

S&F building security light fitting complete with 35 watt LED type IP 66 pressure die cast aluminium housing and heat resistance toughened glass with frame protection and better optics for uniform distribution etc including GI pipe (light grade) mounting bracket of size 32 mm dia and 1.20 m long fixed to wall with and including nut, bolts and GI clamps of size 50 x 6 mm as required complete with twin core copper conductor cable 1.5 sqmm from ceiling rose to fittings complete all as specified and directed.

S&F MCB DB SPN, 4 way 240 volt , double door type MCB DB suitable for mounting incoming and outgoing MCBs double pole/ single pole complete all as specified and directed.

S&F MCB DB SPN, 12 way 240 volt , double door type MCB DB suitable for mounting incoming and outgoing MCBs double pole/ single pole complete all as specified and directed.

S&F 6 to 40 Amp MCB SP with thermal over load as well as magnetic short circuit tripping device with quick, break trip free mechanism, robust design and terminals having heat resistance moulding complete all as specified and directed.

S&F 63 Amp MCB SPN with thermal over load as well as magnetic short circuit tripping device with quick, break trip free mechanism, robust design and terminals having heat resistance moulding complete all as specified and directed.

S&F 40 Amp MCB DP with thermal over load as well as magnetic short circuit tripping device with quick, break trip free mechanism, robust design and terminals having heat resistance moulding complete all as specified and directed.

S&F wall mounted Fan complete with accessories 230 V, 400 mm sweep model "Wind Pro Wall 80 High speed" of make "Orient" or equivalent of Havells/ Bajaj/ Usha/ Khaitan complete all as specified and directed.

M&L in replacement of earthing complete with galvanised steel earth plate electrode size 600X600X6mm thick burried directly in ground vertically to a depth not less than 2.25m below normal ground level with top edge of earth plate not less than 1.5m below normal ground level connected to and incl GI earth lead wire 4mm dia by means of bolts ,nuts, check nuts & washers of galvanised iron and connected to test point all as shown in electrical plate No 3 of SSR part I-2009 and as specified or indicated and testing on completion incl excavation and earth work in any type of strata available at site ,PCC (1:3:6)type C-1 earthing chamber ,pre cast RCC slab 50 mm thick in cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate reinforced with welded steel wire fabric (XPM) weight not less than 4 kg/sqm funnel with GI watering pipe of 20 mm bore medium grade ,wire mesh and lugs ,GI protection pipe of 15 mm bore light grade up to 7.5 mtr long ,etc complete all as specified and directed. NOTE :- GI earth wire and protection pipe beyond 7.5 mtr will be measured and paid separately

SIDHARTH CONSTRUCTION

NOORI ELECTRIC ENGINEERING WORKS

M/S Swarn Constructions

SAJJANHAR ASSOCIATES BUILDERS AND ENGINEERS