Loading…
Loading…
Tender Value
₹72,298
EMD Value
₹1,807
Closing Date
7 Jul 2026, 4:00 pm3d left
Assistant Executive Engineer
PWD Buildings sub division Nedumkandam
GENERAL-eSewa Kiosk at Gram Nyayalaya Nedumkandam-cabin-General Civil Work
2025_PWD_795172_8
04/AEE/NDM/2025-26
Open Tender
Civil Works - Buildings
90 days
PWD Buildings sub division Nedumkandam
Please refer Tender documents.
12 documents required · 12 mandatory
₹555
Yes
₹1,807
Yes
29 Jun 2026
29 Jun 2026
9 Jul 2026
29 Jun 2026
7 Jul 2026
29 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Cabin work | |||||
| 1.001 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | - | kg | - | - |
| 1.002 | 21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | 1 | sqm | - | - |
| 1.003 | 21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides | 1 | sqm | - | - |
| 1.004 | OD4332/2025-2026:Providing and fixing Pre-laminated high density fibre board, with both sides decorative
lamination other side balancing lamination Grade-I (exterior grade) in cabin/shelves with
screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm
thick of approved brand (fittings to be paid separately).Pre-laminated with decorative
lamination both side exterior Grade-I HDF Board 18mm thick confirming to IS:14587(portable
computer table cum cabins). | 1 | sqm | - | - |
| 1.005 | OD4341/2025-2026:Providing and fixing auto- concealed hydraulic soft closing hinges 116x60 mm etc... complete | - | each | - | - |
| 1.006 | OD4342/2025-2026:Providing and fixing powder coated telescopic drawer channels 450mm long with necessary
screws etc... complete as per the direction of Engineer in charge | - | set | - | - |
| 1.007 | 9.115:providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer -in-charge. | - | set | - | - |
| 1.008 | 9.79.2:Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.50 mm | - | no | - | - |
| 1.009 | 9.81.2:Providing and fixing bright finished brass handles with screws etc. complete:100 mm | - | no | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.05 MB
viewnitesewa.pdf
Tender Documents • 0.03 MB
viewsbdesewa.pdf
Tender Documents • 1.63 MB
BOQ_1450314.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid