Providing supply & construction of various work in verious area in nakhatrana nagarpalika -nakhtrana -kutch

No. Description Qty. Rate WITH Per Amount

Box cutting the road surface to proper slope and camber for

making a base for road work including removing the

excavated stuff and depositing on the road side slope as

directed upto 50Mt.lead.

Excavation for foundation upto 1.5 m depth including sorting

2 out and stacking of useful materials and disposing off the 1.00 187.43 189.30 CMT

excavated stuff upto 50 Meter lead.(A) Loose or soft soil

Providing and laying cement concrete 1:4:8 (1- Cement : 4-

coarse sand : 8- hand broken stone aggregates 40 mm

nominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

Providing and fixing pre-cast Rubber Dye / steel Dye inter

locking concrete block 60mm thick with grade of concrete

M300 pnumatic compressed / vibrated mechanically and as

4 per approved design Confirming to IS 15658 : 2006 1.00 680.10 686.90 SMT

including 35 mm Sand layer for levelling and filling the joint

with sand in proper line and level as per guidlines of IRC : SP

63-2018 etc. Complete.

Re-fixing Existing pre-cast Rubber Dye / steel Dye inter

locking concrete block 60mm thick including 35 mm Sand

5 layer for levelling and filling the joint with sand in proper 1.00 302.98 306.01 SMT

line and level as per guidlines of IRC : SP 63-2018 etc.

Providing and casting in situ ordinary cement concrete

6 concrete M-200 for approach slab including formwork 1.00 4026.60 4066.87 CMT

curing and finishing complete.

Providing and fixing M.S. grills of required pattern to

wooden frames of windows etc. with M.S. flats at required

spacings and frame alround, square or round bars with

round headed bolts and nuts or by screws (A) Plain Grill.

Supplying and fixing reinforced concrete heavy duty non-

pressure pipes with collars for culverts including setting and

8 joining the pipes in C.M. 1:2 watering and laying (to level or 1.00 655.33 661.88 RMT

slope) of I.S. class NP2 of following internal diameters.(i)

Supplying and fixing reinforced concrete heavy duty non-

pressure pipes with collars for culverts including setting and

9 joining the pipes in C.M. 1:2 watering and laying (to level or 1.00 1016.94 1027.11 RMT

slope) of I.S. class NP2 of following internal diameters.(ii)

Supplying and fixing reinforced concrete heavy duty non-

pressure pipes with collars for culverts including setting and

10 joining the pipes in C.M. 1:2 watering and laying (to level or 1.00 1322.61 1335.84 RMT

slope) of I.S. class NP2 of following internal diameters.(iii)

Supplying and fixing reinforced concrete heavy duty non-

pressure pipes with collars for culverts carrying heavy traffic

11 as per IS 458-1991 specifications including setting the pipes 1.00 643.49 649.92 RMT

in C.M. 1:2 watering and laying (to level or slopes) of class

NP3 of following internal daimeters.(i) 300mm dia.

Supplying and fixing reinforced concrete heavy duty non-

pressure pipes with collars for culverts carrying heavy traffic

12 as per IS 458-1991 specifications including setting the pipes 1.00 1164.84 1176.49 RMT

in C.M. 1:2 watering and laying (to level or slopes) of class

NP3 of following internal daimeters.(ii) 450mm dia.

Supplying and fixing reinforced concrete heavy duty

non pressure pipes with collars for culverts carrying heavy

13 traffic as per IS 458-1991 specifications including setting the 1.00 1932.67 1952.00 RMT

pipes in C.M. 1:2 watering and laying (to level or slopes) of

class NP3 of following internal daimeters.(iii) 600mm dia.

Providing TMT Bar FE 500D reinforcement for R.C.C. work

14 including bending, binding and placing in position complete 1.00 75.46 76.21 KG

upto floor two level

Takti of Black Granite Stone with Wooden Frame/MS angle

Providing and Laying ordinary cement concrete 1:2:4 (1-

Cement 2- coarse sand : 4- graded stone aggregates 20 mm

nominal size) and finishing smooth with curing etc.

complete including the cost of formwork but excluding the

cost of reinforsement for R.C.C work in (iv) Slabs having

more than 13 cm and upto 15 cm.thickness

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine

sand)(A) Modular

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine

sand)(B) Conventional

(i) Uncoursed Rubble Masonry with hard stone of approved

19 quality in foundations and plinth in Cement Mortar 1:6 (1- 1.00 2475.26 2500.01 CMT

cement : 6-coarse sand including levelling up etc. complete

Precast concrete block masonry (including quoin blocks

jamb blocks closer etc.) with solid concrete blocks of

approved size made of cement concrete 1:3:6 mix (1-

Cement : 3 coarse sand: 6- graded stone aggregates of

mm and down grade) in foundation and plinth cement

Providing and casting in situ controlled cement concrete M-200 for

average 75 mm thick wearing coat laid as directed dincluding

tamping, vibrating, finishing, curing and fillingin joints with

bitumen complete

Providing and laying white glazed tiles 6mm thick in flooring

treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1-cement : 3-coarse sand ) finishing

with flush pointing in white cement.

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x

24'' in flooring treads of steps and landing laid on a bed of

12mm thick cement mortar 1:3 (1-cement : 3-coarse sand )

finishing with flush pointing in white cement.

Providing and casting in situ ordinary cement concrete M-

24 150 for Kerbs / kerb blocks including formwork, curing and 1.00 3793.95 3831.89 CMT

finishing complete.

Providing and laying cement concrete flooring 1:2:4 (1-

cement : 2-coarse sand : 4-graded stone aggregate 20mm

nominal size) laid in one layer and finished with a floating

coat of neat cement. (B) 50mm thick.

Providing and laying polished Kota stone slab flooring over

20mm (Average) thick base of cement mortar 1:6 (1-cement

: 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse

sand) laid over and jointed with grey cement slurry mixed

with pigment to match the shade of slab including rubbing

and polishing etc. complete. (A) 25mm thick

Providing corrugated G.I. sheet of class-3 roofing fixed with

glavanished iron J or L Hooks, Bolts and nuts 8mm diameter

27 with bitumen and G.I. limpet washer or G.I. limpet washer. 1.00 719.93 727.13 SMT

filled with white lead complete excluding the cost of

purlins, Rafters and Trusses.(1) 0.80 mm thick sheet.

Providing 15mm thick cement plaster in single coat on

Rough (Similar)side of single or half brick walls for interior

plastering upto floor two level and finished even and

smooth in (i) Cement mortar 1:3 (1-cement:3-sand)

Distempering with dry distemper of approved brand and

manufacture (One coats) and of required shade on wall

surfaces of given an even shade, after thoroughly brushing

the surface clean of all grease, dirt, loose pieces of scales

including preparing the surface even and sand papered

Distempeing (Two coats) with oil bound distemper of

approved brand and manufacture and of required shade on

wall surfaces to give an even shade, over and including a

priming coat with distemper primer of approved brand and

manufacture after thoroughly brushing the surface free

from mortar dropping and

other foreign matter and also including preparing the

surface even and sand papered smooth.

Demolition including stacking of serviceable materilas and

31 disposal of unserviceable materials with all lead and lift. (i) 1.00 1020.60 1030.81 CMT

Demolition of terrace including stacking of serviceable

32 materilas and disposal of unserviceable materials with all 1.00 61.59 62.21 SMT

lead and lift.(i) Brick tile covering.

Road marking with hot applied thermoplastic paints with

reflectorising glass beads on bitumin surface providing and

laying a hot applied thermoplastic compound 2.5 mm thick

including reflectorising glass beads @ 250gms per sqm area,

thickness of 2.5mm is excluding of surface applied glass

beds as per IRC:35-2015. The finished surface to be level,

uniform and free from streaks and holes. zebra patta /bump

33 patta lane/center line/ edge line/cut patta. The white color 1.00 364.08 367.72 SMT

marking should provide liminance coefficinet on cemend

road shalll be min 130 mcd/m2/lux and Asphalt road shall

be min 100 mcd/m2/lux during the service life during the

day time. The marking should meet the performance

criteria for night time reflectivity, wet reflectivity and skid

resistance as mentioned in the section-15 of IRC 35-2015.

Warranty for the Retro reflectivity should be two years.

Preparing surface by Brushing with wire brushes for

removing caked mud etc. sweeping with brooms and finally

fanning the cleaned surface with gunney bags to remove all

loose dirt etc.(ii) Black top surface.

Providing 125 mm thick M-200 Ordinary cement

concrete road using tremix vaccum dewatering system

with providing and fixing & removing of "C" channel

having size 75 X 75 mm as per required level slope and

thickness of concrete and levelling and finishing the

concrete using surface vibrator, power floater and 1.00 5659.26 5715.85 CMT

trowel light brooming on as directed. including making

expansion joint of by cutting of joint using concrete

cutter machine etc. fillingin joints with bitumen

complete For C C ROAD

Providing extra labour charges in for tremix (vaccume

dewatering services) process on CC road surface by using

36 vaccume dewatering pump,floater,surface vibrator including 1.00 82.01 82.83 SMT

making grooves,rough finish on surface as per instruction

incluiding levelling etc.complete

37 Barbed wire for fencing of galvanized steel wire 1.00 5762.71 5820.34 Quintal

38 Pillar tap 15mm dia 1.00 261.86 264.48 Each

39 Pillar tap 20mm dia 1.00 300.85 303.86 Each

Constructing Brick masonry road gully chamber 500mm x 450mm

40 x 600mm including 500mm x 450mm C.I. horizontal grating wih 1.00 1997.22 2017.19 NOS

frame complete.

Item no. Size Unit Revised rate for 2022-23

Group wise rates of Bare pipe per kg are as under. Rates of sizes other than above may be

derived from following rates :

Up to 914 mm OD & Up to 10 mm thickness

Above 914 mm OD & Above 10 mm

thickness of Plate/Pipe

The mass (weight) per metre run of pipes can be worked out as under (ref : IS3589 : 2001)

M = mass of the pipe kg/meter, OD = outside of tube diameter in mm, T = thickness of tube in mm

Item No. 2.1 DI Pipe

Providing and supplying D. I. K-9 grade pipes for following nominal bore diameter with internal cement mortar

lining including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading,

conveyance to departmental stores, stacking etc. complete. (IS 8329-2000). Rate for DI pipe based on Wholesale

Price index of Pig Iron as 157.60 for the month of Dec-2022. For sewerage project cement mortor lining shall

be with sulphate resistance cement

2.1.A DI Pipe K-9

2.1.B DI Pipe K-7

Providing and supplying D. I. pipes for following nominal bore diameter with internal cement mortar lining

including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading,

conveyance to departmental stores, stacking etc. complete. (IS 8329-2000).

Item no. Size Unit Revised rate for 2022-23

2.1.C DI Pipe K-9 D/F

Item No. 3.1 P. V. C. Pipes

Providing and supplying in standard length ISI mark rigid unplasticised PVC pipes suitable for potable water with

ring fit joint including cost of rings, as per IS specification no. 4985/1988 including all local and central taxes,

transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the departmental

stores and including cost of jointing meterial etc. complete.

1.One coupler / ring shall be provided with each full length pipe cost of which is included in rates below.

2. 3% (Three) Discounted rate to be consider for Coupler jointed pipe

3. Rate for PVC Resin as Rs. 91739/MT (Price Without GST)

3.1.A Test Pressure 4 Kg/cm2.

Item no. Size Unit Revised rate for 2022-23

3.1.B Test Pressure 6 Kg/cm2.

3.1.C Test Pressure 8 Kg/cm2.

3.1.D Test Pressure 10 Kg/cm2.

Item no. Size Unit Revised rate for 2022-23

Item No. 4.1 H.D.P.E. Pipes

Providing and supplying in standard length ISI mark high density Polyethylene H.D.P.E. Pipes suitable for potable

water as per IS specification no. 4984/1995 including all local and central taxes, transportation, freight charges,

octroi, inspection charges, loading, unloading, conveyance to the dept. stores etc. comp.

(1) Rate for HDPE (PE-100) Pipe based on the rate of HDPE Resin as Rs. 121185/MT (Price Without GST)

Item no. Size Unit Revised rate for 2022-23

HDPE (PE-100) Pipes in standard length suitable for Sewage, Industrial Effluents & Rising

Providing & Supplying of ISI Marked High Density Poly Ethylene (HDPE - PE-100) Pipes in standard length

suitable for Sewage & Industrial Effluents as per IS Specification no. 14333-1996 or its latest revision /

amendments including all local & central taxes & duties, freight charges, loading, unloading & conveyance to

departmental stores etc. complete.

4.2.A HDPE- 6kg/cm2

4.2.B HDPE- 10kg/cm2