Shifting and erection of 11 KV Overhead Powerlines in E3 road and at E3-N9 junction and E3-N16 Junction in Amaravati Capital City , Andhra Pradesh including dismantling of existing lines and poles obstructing road development works

Supply, transportation and erection of 12.5 m Spun Pole with working load of 350 kg conforming to IS 1678-1998 and REC specification with latest amendments thereof, in position, aligning and setting to work as per specification, back filling the earth, ramming for consolidation, including cost, conveyance, T&P and labour charges for loading, unloading etc., complete, but excluding pit excavation. [Makes: As per approved makes of APCPDCL]

Excavation of pits in all soils, i.e, mixture of gravel and soft disintegrated rock like shales ordinary gravel, stony earth and earth mixed with fair sized boulders for 12.5 m Spun Poles (2'6"x2'6"x7' or 0.75 m x 0.75 m x 2.1 m) including T&P and labour charges etc., complete.

Supply, and erection of 9.1 m PSCC pole (280 kg) conforming to IS 1678-1998 and REC specification with latest amendments thereof, in position, aligning and setting to work as per specification, back filling the earth, ramming for consolidation, including cost, conveyance, T&P and labour charges for loading, unloading etc., complete. [Makes: As per approved makes of APCPDCL]

Excavation of pits for 9.1 m PSCC Poles 2'x2'x5' or (0.6 m X 0.6 m X 1.5 m) in all soils, i.e, mixture of gravel and soft disintegrated rock like shales ordinary gravel, stony earth and earth mixed with fair sized boulders.

Supply, and erection of 8 m PSCC pole (200 kg) conforming to IS 1678-1998 and REC specification with latest amendments thereof, in position, aligning and setting to work as per specification, back filling the earth, ramming for consolidation, including cost, conveyance, T&P and labour charges for loading, unloading etc., complete. [Makes: As per approved makes of APCPDCL]

Supply, paving, stringing & jumpering, testing and commissioning of 55 Sq.mm AAA Conductor conforming to REC specification and IS-398 Part-IV 1994 with latest amendments thereof, including fixing of suitable rollers, bamboos, paving out conductor on suitable supports, providing temporary stays, tensioning, sagging correctly, fixing at strain point, transporting to pin points, binding, rectification of poles, guys and jumpering of various Conductors including cost of conductor, transporting of materials and T&P from road side to location including loading and unloading and providing watch and ward till the lines are handed over to APCPDCL etc., complete for finished item of work. (Make: As per APCPDCL approved make).

Supply , fabrication and fixing of M.S.STAY CLAMPS FOR 9.1 M PSCC POLE including labour charges etc., complete as per APCPDCL standards.

Supply , fabricationand fixing of M.S.STAY CLAMPS FOR 8 M PSCC POLE including labour charges etc., complete as per APCPDCL standards.

Supply and fixing of 11 KV pin Insulator (IS 731/ 1971) with minimum creepage distance of 300 mm on existing cross arm including all accessories like Hot dip GI spindle and nuts etc.,

Supply and fixing of 11 kV Polymer Disc insulator (C&T) and Fittings (C&T Type metal parts) including labour charges etc., complete as per APCPDCL standards.

Supply, erection and fixing of 11KV TOP CLEAT WITH CLAMPS FOR 9.1 M POLE including all accessories as directed by Engineer-In-Charge

Supply, erection and fixing of 11KV V 'X' ARM(75X40) WITH CLAMP FOR 9.1m pole including all accessories as directed by Engineer-In-Charge

Supply, fabrication and fixing of M.S.BACK CLAMPS FOR 9.1 M PSCC POLE including labour charges etc., complete as per APCPDCL standards.

Supply, fabrication and fixing of 33KV M.S.BACK CLAMPS FOR SPUN POLES including labour charges etc., complete as per APCPDCL standards.

Supply , erection and fixing of 11 kV Tapping Channel Cross arm with 100x50MM MS Channel for 9.1 including labour charges etc., complete as per APCPDCL standards.

Supply and fixing of MS BOLTS & NUTS 5/8 X 4" including labour charges etc., complete as per APCPDCL standards.

Supply and fixing of MS BOLTS & NUTS 5/8 X 6" including labour charges etc., complete as per APCPDCL standards.

Providing concrete for pole pit for 12.50 M/350 Kg Spun Pole (Pole pit size 0.6 X 0.6 X 2.0M) with C.C.(1:3:6) using 20 mm and 12mm HBG metal as directed by the Engineer-In-Charge.

Providing concrete for pole pit for 9.1 M/280 Kg PSCC Pole (Pole pit size 0.6 X 0.6 X 1.5 M) with C.C.(1:3:6) using 20 mm and 12mm HBG metal as directed by the Engineer-In-Charge.

Supply and fixing of LT 3 phase 5 wire cross arm of length 4' 5" with 50 x 50 x6 mm MS angle ( wt 7.30Kgs) and necessary clamping arrangements, cutting, drilling and welding etc., complete

Supply and fixing of 100x65mm LT porcelain pin insulator as per IS 1447-1997 suitable for working voltage 1100 V including all accessories like Hot dip GI spindle and nuts etc.,

Supply and fixing of 75x90mm LT porcelain shackle insulator as per IS 1443-1979 suitable for working voltage 1100 V including all accessories like Hot dip GI spindle and nuts etc.

Supply and laying of 25mm x 6mm GI Flat (1.18Kgs/1Mtr) size Earth wire/Strip in horizontal /Vertical run in Ground/surface/Recess including, riveting, soldering, saddles, making connection etc as required

Supply and laying of CI EARTH PIPE 80 MM DIA 2.5MTS LENGTH including all accessories as directed by Engineer-In-Charge

Supply and erection of M+9 GI Towers (as per ASCI specifications WT 3.4 MT and Pit 1.2X1.2X3.3 Mts. i.e. 4.752CUM as per drawing including earthwork excavaion and foundation of Tower as directed by Engineer-In-Charge.

Supply, paving, stringing & jumpering, testing and commissioning of 100 Sq.mm AAA Conductor conforming to REC specification and IS-398 Part-IV 1994 with latest amendments thereof, including fixing of suitable rollers, bamboos, paving out conductor on suitable supports, providing temporary stays, tensioning, sagging correctly, fixing at strain point, transporting to pin points, binding, rectification of poles, guys and jumpering of various Conductors including cost of conductor, transporting of materials and T&P from road side to location including loading and unloading and providing watch and ward till the lines are handed over to APCPDCL etc., complete for finished item of work. (Make: As per APCPDCL approved make).

Supply and erection of 33KV TAPING CHANNEL X ARMS (100x50MM ) including all accessories as directed by Engineer-In-Charge

Supply and erection of 33KV V CROSS ARMS WITH CLAMPs (100x50 MM channel) including all accessories as directed by Engineer-In-Charge

Supply ,erection and fixing 33KV PIN INSULATORS (Polymer) with GI pin including all accessories as directed by Engineer-In-Charge

Supply , erection and fixing of 33KV 70KN COMPOSITE POLYMER INSULATOR including all accessories as directed by Engineer-In-Charge

Supply and laying of LT XLPE CABLE SINGLE CORE 120 SQMM as directed by Engineer-In-Charge.

Supply and fixing of SMC distribution box as directed by Engineer-In-Charge.

Supply and erection of 11KV 200A TT AB SWITCH WITH INSULATORS including all accessories as directed by Engineer-In-Charge

Supply and fixing of TT ABS Sitting channel & strut with clamp as directed by Engineer-In-Charge.

Supply, and fixing of 11KV 3Ph HG FuseSets with PolymerType Insulators including all accessories as directed by Engineer-In-Charge

Supply, and erection of M+12 type GI heavy structure tower as per ASCI specifications with minimum weight of WT 4 MT and founadtion Pit dimensions of 1.2X1.2X3.3 Mts. i.e. 4.752CUM as per drawing including earthwork excavaion and foundation of Tower as directed by Engineer-In-Charge.

Construction of DTR plinths- Pillar mounted RCC plinth with 5'x5'x5" slab with column 6' above ground level. - Excavation of pit of size 4’x4’x5’, laying bed concrete with CC(1:4:8) using 40mm and 20mm HBG metal for 6” depth, Construction of distribution transformer plinth with footing size (4’x4’x1.5’), column size 9”x9”x4'6”(below ground), 9"x9"x5' (above ground), cross beams in plus shape 4'x9”x12”, slab size 5’x5’x5”, providing reif steel 12mm rod for footings and slab at 6" spacing, 4 nos 12mm rod for columns and beams with 8mm stirrups, re-filling the hollow portion with excavated earth, plastering CM (1:5) 12mm thick and painting one coat to slabs, column and beam.

Erection of 3Ph DTRs 63 KVA or 100 KVA Distribution Transformer on the plinth/pole carefully without causing and damaging to bushing including labour and transport complete including earthing as per department standards.

Supply and fixing of HT/LT box type crosss arms as directed by Engineer-In-Charge

Supply and making end termination with heavy Alluminium lugs (pin/ ring type) as per IS specification duly crimped with crimping tool, PVC tape etc of 120 sqmm Makes:Dowels/Jainson/Comet

Supply and laying of MS FLAT 75X8 including all accessories as directed by Engineer-In-Charge

Supply and laying of MS Channel 100X50 including all accessories as directed by Engineer-In-Charge

Supply and laying of MS ANGLE 65X65X6 including all accessories as directed by Engineer-In-Charge

Erection of 3Ph DTRs 25 KVA Distribution Transformer on the plinth/pole carefully without causing and damaging to bushing including labour and transport complete including earthing as per department standards.

Estimate Contract Value (ECV)