Loading
Loading…
Loading…
Tender Value
₹5.8 L
EMD Value
₹11,644
Closing Date
28 Sept 2026, 2:00 pmDue tomorrow
Executive Engineer PWD Barrackpur Division
BARRACKPUR DIVISION Mangal Pandey Uddyan_Gandhighat_Barrackpore_District_North_24Pgs_Pin_700120
Providing staging arrangement for inspection of Madhyamgram ROB by Rites and Senior officials and replacement of defective rainwater pipes under Barrackpur Division during the year 2026-2027
2026_WBPWD_5023943_1
WBPWD/EE/BKPD/NIeT-16/2026-27
Open Tender
CIVIL WORKS
Percentage
21 days
Barrackpore
Please refer Tender documents.
4 documents required · 4 mandatory
₹11,644
11 Sept 2026
11 Sept 2026
30 Sept 2026
11 Sept 2026
28 Sept 2026
11 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings,runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose.The payment will be made once irrespective of duration of scaffolding. | 936 | sq.M | 338.25 | ₹3,16,602 |
| 2 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)Single socketed pipes.12.41.2 110 mm diameter | 370.92 | rm | 377.4 | ₹1,39,985.21 |
| 3 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)Single socketed pipes.12.41.1 75 mm diameter | 18.2 | rm | 248.8 | ₹4,528.16 |
| 4 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10 mm gap for thermal expansion.Coupler 110 mm | 63 | Each | 136.15 | ₹8,577.45 |
| 5 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10 mm gap for thermal expansion.Bend 87.5°- 110 mm bend | 63 | Each | 150.35 | ₹9,472.05 |
| 6 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS :5382,leaving 10 mm gap for thermal expansion.Single tee without door 110x110x110 mm | 21 | Each | 234.15 | ₹4,917.15 |
| 7 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS :5382,leaving 10 mm gap for thermal expansion.Shoe (Plain)110 mm Shoe | 52 | Each | 131.85 | ₹6,856.2 |
| 8 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.110 mm | 76 | Each | 371.3 | ₹28,218.8 |
| 9 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. | 21 | Each | 54.7 | ₹1,148.7 |
| 10 | Sub Total | 1 | Nos | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.76 MB
2911.pdf
Tender Documents • 1.86 MB
Documents.pdf
Other Document • 1.49 MB
BOQ_5109076.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .