REPAIR AND MAINT OF SUMMER APPLIANCES LIKE CEILING FAN WALL MOUNTING FAN PEDESTAL FAN AND EXHAUST FAN AND CERTAIN OTHER MISC EM ITEMS AT AF STN BHUJ

Amount

M &L for disconnecting,taking down & removing carefully the existing ceiling fan ,exhaust fans,wall mounted fans,pedestal fans of any description,any sweep and from any position/location,sealing the cable end, for repairs/servicing/ overhauling properly cleaning/removing old existing grease oil and applying new oil grease, varnishing of winding, cleaning dust rust and assembling and connecting complete with copper conductor multi stranded 3 core wire of size 14/0.0076, including replacement of bushes, bearing, and fan blade with new and testing after refixing at site complete all as specified and as directed by Engr-in-Charge.Note: Bushes, bearing, and fan blade measured and paid separately.

M & L for taking out & removing old burnt-out windings of electric fans of any description and rewinding of fan motor with appropriate size super enameled copper wire as approved by Eng-in-charge including insulating material such as illuminous paper,Letherized paper,cotton tape,glass sleeving,insulating varnish etc.and transportation to site after testing at workshop,connecting and testing on full load ,hanging/fixing the repaired fans in same position or at position as directed by engr-in-charge. as directed for the following fans:- (a) Rewinding of motor of ceiling fans 1200/1400 mm sweep complete all as specified and directed By Engr-in -Charge.

All as per item No 02 here-in-before but rewinding of motor of exhaust fans of 300/450 mm Sweep

All as per item No.02 here-in-before but rewinding of motor of Wall Mounted Fans of /450/600 mm Sweep

S&F in replacement ball bearing suitable for ceiling fan/exhaust fan/wall mounte fan/pedestal fan of Make:- SKF/TATA/NBC etc as approved all as specified and directed By Engr-in -Charge.

S&F in replacement Gun Metal bushes suitable for ceiling fan/exhaust fan/wall mounte fan/pedestal fan etc as approved all as specified and directed By Engr-in -Charge.

S&F in replacement Rotor shaft suitable for ceiling fan all as specified and directed By Engr-in -Charge.

S&F in replacement capacitor 2.5 mfd 250 volts AC Make USHA, Crompton, Bajaj, Concap all as specified and directed By Engr-in -Charge.

S&F in replacement capacitor 4 mfd 250 volts AC Make USHA, Crompton, Bajaj, Concap all as specified and directed By Engr-in -Charge.

S&F in replacement only rubber reel, bolt & nut, including cotter pin etc, complete all as specified and directed By Engr-in -Charge.

S&F in replacement Flexible wire 23/.0076 twin core copper conductor all as specified and directed By Engr-in -Charge.

M & L for fabrication of fan hook made out of MS strip 32x6mm duly welded with 12mm dia MS rod and fan Hook bend to shape 'S' after taking out old one all as specified and directed By Engr-in -Charge.

Supply and Fix in replacement in repair ceiling fan down rod of length 300/450 mm, inner diameter 15mm and thickness not less than 1.5mm with clamps Nuts, Bolts and washers for existing ceiling fan as approved by Engr-in-Charge

M&L for complete painting of ceiling fan of any make and sweep with two coats synthetic enameled paint(spray paining) of existing colour or ordered colour on one coat of red oxide primer after scratching and making/prepration of clean and smooth surfaces by applying putty all as specified and as directed by Engr-in-Charge.

All as per item No 14 here-in-before but painting of exhaust fans of 300/450 mm Sweep

Supply and Fix in replacement of PVC body exhaust fan, AC single phase 230/240V of size 250 mm sweep with louvers including making hole of suitable size/ Alteration to the existing hole to fix the Exhaust fan all as directed by Engineer-in-Charge. Make:- Bajaj/Havells/CG/Usha. (Note: Old unserviceable Exhaust Fan will be deposited in MES store yard).

Supply and Fix in replacement of PVC body exhaust fan, AC single phase 230/240V of size 300 mm sweep with louvers including making hole of suitable size/ Alteration to the existing hole to fix the Exhaust fan all as directed by Engineer-in-Charge. Make:- Bajaj/Havells/CG/Usha. (Note: Old unserviceable Exhaust Fan will be deposited in MES store yard).

Supply and Fix in replacement of metal body exhaust fan, AC single phase 230/240V of size 250 mm sweep with louvers including making hole of suitable size/ Alteration to the existing hole to fix the Exhaust fan all as directed by Engineer-in-Charge. Make:- Bajaj/Havells/CG/Usha. (Note: Old unserviceable Exhaust Fan will be deposited in MES store yard).

Supply and Fix in replacement of metal body exhaust fan, AC single phase 230/240V of size 300 mm sweep with louvers including making hole of suitable size/ Alteration to the existing hole to fix the Exhaust fan all as directed by Engineer-in-Charge. Make:- Bajaj/Havells/CG/Usha. (Note: Old unserviceable Exhaust Fan will be deposited in MES store yard).

Supply and Fix in replacement energy saving ceilling fan 1200mm sweep and connecting up including provision of cable from ceilling rose or connector to fan and all as directed by Engr-in-charge .Make :Usha or equivalent Bajaj/ Cromton Greaves/Havells (Note:- Old unserviceable Ceiling fan deposit in AGE E/M store yard)

Supply & fix in replacement of LED Garden light / Post top of 25 Watt Integral pole mounted decorative LED with IP-65 protection complete fixed on existing post/New post with all assembly and electric connection with service wire all as specified and directed by Engineer-in-Charge.Make-Bajaj Cat part no-BLPTSP 25W NW LED, or equivalant in Crompton / Philips / Wipro)

S & F Bollard luminaire die cast housing and clear acrylic of IP 65 protection Inverted Tripod type , resistance to corrsion of 10 Watt with LED lamp with all fixing arrangements fixed with soft 360 deg light distribution complete including taking down old unserviceble fitting of any type all as directed by Engineer-in-Charge.Make:Havells Cat part No. MINIMOUNTBL10WLED830PSYMTOPMMAS Equivalent in Philips/Shakti/Crompton.

Supply and Fix in replacement energy saving, evironment friendly, long life, corrosion resistent, impact proof, Mini LED building security light made up of pressure die cast housing with prismatic polycarbonate diffuser and individual LEDs with secondary optics and IP 65 protection with LED 20 W light source all as per Havells Cat no. ENDURAPEARLSL20WLED757SASYTOPCMP or equivalent in Orient/Philips/Bajaj/CG/Polycab including material and labour for suitable bracket made of 20 mm dia light grade GI pipe & MS clamps complete with nuts and bolts and washers all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repairs wall mounted decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack instant start with uniform light distribution 10 W 2 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting as per Make Havells Cat No LHEXBTP7IN1W010 or equivalent in Orient/Philips/Bajaj/CG/Surya/Polycab all as directed by EIC.

Supply and Fixing in repairs wall mounted decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack instant start with uniform light distribution 18 W 4 ft indoor decorative with 2 Core copper wire freom ceiling rose to light fitting as per Make Havells Cat No LHEXBTP7IN1W018 or equivalent in Orient/Philips/Bajaj/CG/Surya/Polycab all as directed by EIC.

S&F in replacement LED retrofit 4 ft 18/20 Watt T8 Tube light including disconnecting existing copper/ electronic ballast and connected items like starter, flexible wire etc complete in the existing flourescent T/L fittings of 36/40 Watt and 1x36/40W , 2x36/40 W all as directed by Eng In Charge. Make: Havells Cat No LHLDDAXCUL8Z018or equivalent in Orient/Philips/Bajaj/CG/Surya/Polycab all as directed by EIC.

S&F in replacement LED retrofit PL-L 15 W light including disconnecting existing copper/ electronic ballast and connected items like starter, flexible wire etc complete in the existing PL-L fittings of 1x36W , 2x36W,3x36W all as directed by Eng In Charge. Make: Havells Cat No PHOTONULTRA PLL419TL18WLED865SPC or equivalent in Orient/Philips/Bajaj/CG/Surya/Polycab all as directed by EIC.

Pulling down the existing U/S wires of any type from concealed wiring carefully of aluminium point wiring (light, fan, bell, socket, power point etc.) with or without conduit, along with all connected accessories such as ceiling rose, switches, sockets, switch boards, fan regulator etc complete and all as directed by EIC

Pulling out sub main wiring only any size of aluminium conductor cable PVC insulated with or without condiut all as directed.

Material and labour for point wiring complete with 1.5 Sqmm single core multistranded copper conductor FR PVC insulated and unsheathed cable 1100 volts grade ISI marked drawn through and including PVC CASING & CAPPING INCLUDING accessories etc including fixed to wall/ceiling including provision of 1.5 sqmm single core multistranded copper conductor FR PVC insulated and unsheathed as earth wire continuity with wooden board (1st class teak wood) with laminated sheet top cover, 3mm thick complete as specified and directed for :-

One light point controlled by one, one way switch single pole piano type

One Fan point controlled by one, one way switch single pole piano type

One 3 pin 5 Amp socket outlet on the same board .

One 3 pin 5 Amps socket out let on independent board

One bell point controlled by one bell push on independent board.

All as per item No.3 here-in-before but with 2.5 Sqmm Copper conductor cable for one 3 pin, 15 Amps socket out let on independent board.

M&L for point wiring complete with 1.5 Sqmm single core multistranded copper conductor FR PVC insulated and unsheathed cable 1100 volts grade ISI marked drawn through existing conduit including provn of 1.5 sqmm single core multistranded copper conductor FR PVC insulated and unsheathed as earth wire continuity with new plastic laminated white coloured top sheet cover 3.0 mm thick on existing sunken box complete as specified and directed.

One light point controlled by one, one way switch single pole piano type

One Fan point controlled by one, one way switch single pole piano type

One 3 pin 5 Amp socket outlet on the same board .

One 3 pin 5 Amps socket out let on independent board

One bell point controlled by one bell push

One light point controlled by two, two way switches.

All as per item No.5 here-in-before but with 2.5 Sqmm Copper conductor cable for one 3 pin, 15 Amps socket out let on independent board.

S&F modular white cover plate with frame of module 2 flush ISI marked Havells or equivalent make of Anchor all as specified and directed.

S&F modular white cover plate with frame of module 4 flush ISI marked Havells or equivalent make of Anchor all as specified and directed.

S&F modular white cover plate with frame of module 6 flush ISI marked Havells or equivalent make of Anchor all as specified and directed.

S&F modular white cover plate with frame 8 module ISI marked make - Havells or equivalent make of Anchor all as specified and directed.

S&F modular blank plate module 1 all as specified and directed.

M&L for sub main wiring with two runs of PVC insulated and unsheathed FR cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 4 Sqmm single core, copper conductor drawn through and including PVC casing caping ISI marked with accessories and 4 Sqmm single core multistranded copper conductor FR PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and directed.(Note: Two runs of conductor with one run of earth wire and PVC casing capping will be measured & paid as one unit)

M&L for sub main wiring with two runs of PVC insulated and unsheathed FR cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 4 Sqmm single core, copper conductor drawn through existing conduit and 4 Sqmm single core multistranded copper conductor FR PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and directed(Note: Two runs of conductor with one run of earth wire will be measured & paid as one unit)

S&F in replacement, switch piano type, 5 Amp. SP, one way all as directed/ specified.

S&F in replacement switch socket outlet, 5 pin, 5 Amp, piano type all as directed/ specified.

S&F in replacement switch socket combination 2 in 1, 6 pin 5 and 15 Amp flush type universal all as directed/ specified.

S&F in replacement switch bell push, flush type, 5 Amp all as directed/ specified.

S&F in replacement, modular switch flush type, 6 Amp. SP, one way ,1 module all as directed/ specified.

S&F in replacement modular socket outlet, 3 pin, 6 Amp, flush type 2 module all as directed/ specified.

S&F in replacement modular swicth, 16 Amp flush type 1 module all as directed/ specified.

S&F in replacement modular socket outlet, 3 pin, 6/16 Amp flush type 2 module all as directed/ specified.

S&F in replacement modular bell push, flush type, 5 Amp,1 module all as directed/ specified.

S&F in replacement bell, AC, 230 V, SP, ding dong type all as directed & specified. Make Anchor/leader

S&F in replacement switch piano flush type 230/250 Volt, 5 Amps single pole two way, all as specified and directed.

S&F in replacement stepped type electronic fan Regulator flush type on the existing phenolic laminated etc as reqd single pole 240 volts grade 350 watts heavy duty ISI marked.

S&F in replacement of ceiling fan regulator ModularType electronic step type 5 step 360 deg Havells or equivalent make of Anchor,Polycab all as specified and directed by Engineer-in-harge.

S&F in replacement lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings all as specified and directed.

S&F in replacement of Ceiling rose 3 phase, PVC/ Polycarbonate body all as directed/ specified.

Supply and Repair hylum sheet 3mm thick as existed in the switch board making provision for fixing switches and socket all as specified and directed

S&F in Replacement double door Sheet metal enclosures factory made DBs protection class IP-43, suitable for fixing of MCBs, Isolators etc, confirming to IS 13032 triple pole and neutral 4 ways with 200 Amp rated bus bar 415 volts powder coated all as specified (Make : Havell's, L&T, Standard, Crompton/Indoasian/Polycab)

All as per item No. 43 above but SPN 8 way with 200 Amp rated Busbar. (Make : Havell's, L&T, Standard, Crompton/Indoasian/Polycab)

All as per item No 43 above but SPN, 4 way. (Make : Havell's, L&T, Standard, Crompton/Indoasian/Polycab)

S&F in replacement of isolators, MCBs, etc. In distribution board of the following rating and capacities (Make : Havell's, L&T, Standard, Crompton/Indoasian/Polycab)

MCB TPN 415 volts 63 Amps Capacity, 10 KA

MCB TPN 415 volts 100 Amps Capacity, 10 KA

MCB SPN of 240 volts 20/32/40 Amps Capacity, 'C' series, 10 KA

MCB SP of 240 volts 5-32 Amps Capacity, 'C' series, 10 KA

M&L for earthing complete with galvanised steel earth plate electrode 60cmx60cm x 6 mm thick buried directly in ground vertically to depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level connected to and including GI strip 25x4mm as earth lead up to 7.5 mtr length by means of bolts, nuts check muts and washers etc. of galvanised iron or steel all as shown in electrical plate No. 3 including provn of GI protection pipe light grade of 32mm bore upto 7.5m length and connected earth strip to earthing test point all as shown in electrical plate No. 3 of SSR Part - I 2009 and as specified or indicated and testing on completion including necessary excavation & earthwork in any type of soil, PCC (1:3:6) type C1 chamber, precast slab 50mm thick in cement concrete (1:2:4)type B1 (rein forced with welded steel wire fabric (XPM) of weight not less than 4kg/sqm) with frame, funnel with watering pipe of 20mm bore medium grade, wire mesh and lugs test point etc.

S&F in Replacement metal clad enclosure pole and neutral with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps. (Make : Havell's, L&T, Standard, Crompton/Indoasian/Polycab)

Supply and fixingTamper proof Single phase AC KWH meter 10-60 Amps with following features including sealing and sealing wire, Class – 1 accuracy as per IS 13779, 240V, 50HZ LCD display, Forward energy recording irrespective of current direction, LED indication for earth leakage, elegant polycarbonate enclosure High surge with stand up to 8 KV Anti temper feature. Measures & Displays kWh. Make: L & T model no: EM 101+ Cat part no :- WM101BC7DL0 / SECURE / CRADIT / HPL . ( Note: Old unserviceable elect meter will be deposited in MES store yard).

Supply and Fix in replacement of metal body exhaust fan, AC single phase 230/240V of size 450 mm sweep with louvers including making hole of suitable size/ Alteration to the existing hole to fix the Exhaust fan all as directed by Engineer-in-Charge. Make:- Bajaj/Havells/CG/Usha. ( Note: Old unserviceable Exhaust Fan will be deposited in MES AGE E/M store yard).

M/s Pal Builders