PROVN OF TEMPORARY OTM ACCN FOR PECHORA COMBAT FIT AT AF STN BHUJ

Amount

Supply & install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2.of capacity 1.5 TR complete all as specified and directed by Engineer-in-Charge.

Supply & fix voltage stabilizer for automatic operation single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stablized at 230 V with low and high cutoff facility including under and over current protection with accurancy of + 2.5% and of capacity 4.0 KVA complete all as specified and directed by Engr-in-Charge.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16.0 sqm 4 core complete all as specified and as directed by Eng-in-Charge.

Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes pier holes etc not exc. 10sqm on plan and not exc 1.5m in depth and getting out in Soft/ loose soil complete all as specified and directed by Engineer-in-Charge.

Returning filling in soil and including spreading leveling watering and well ramming in layers n.exc. 25 cm thick complete all as specified and directed by Engineer-in-Charge.

Removing excavated soil to a distance n.exc. 50 mtr and depositing where directed at a level n.exc. 1.5m above the starting points complete all as specified and directed by Engineer-in-Charge.

Material & labour for sand filling under floors or in foundations spreading and levelling in layers n. exc. 25 cm thick, well ramming including watering and consolidation complete all as specified and as directed by Engineer-in-Charge.

Supply & lay ISI marked & conforming to IS - 5820 - 1970 unreinforced precast concrete cable cover Class LV, type -II flate size 300mm X 180 mm X 40 mm in trenches as protection to LT UG cable complete all as specified and directed by Engineer-in-Charge.

Material & labour for earthing complete with galvanized steel pipe electrode 50 mm bore, medium grade, 6 mtr length buried directly and preferably vertically in ground with top edge of the pipe not less than 0.3 meters below normal ground level, connected with 20 mm dia GI pipe by means of reducer and clamped with CI checknuts through 4.0 mm GI earth lead as shown in electrical plate No 2 (duly protected with 20 mm dia light grade GI pipe upto 7.5 m from the earth plate) and connected to GI steel earth pipe including charcoal, dust, common salt necessary excavation in soft/loose soil, returning filling in and removal of surplus soil to a distance not exceeding 50 m from the starting point, watering pipe 20 mm dia GI light grade treated with 1 No PGI funnel, pit of PCC 1:3:6 type C-1, RCC 1:2:4 type B-1 pit cover 75 mm thick reinforced with 6 mm dia bars @ 75 mm c/c both ways and with MS handle 12 mm dia complete connected to earth test point including testing complete all as specified and directed by Engr-in-Charge.

Supply & fix prefab containers of standard size( 30ft x 10ft x 8.6ft) with flat roof and standard quality as per following manufacturer's specifications. (a) Size- 30 X 10 X 8.6FT Portable Office Cabin (b) Structure- 4 X 2 inch – square pipe, cross member of 3 X 1.5 inch square pipe, overall framework, internal, external cladding with insulation & other peripherals. (c) Roof-Plain roof of MS plane sheet welded with MS frame structure, adequate roof bows top inner decorated with 8MM thick MDF laminated board. (d) Outer wall-MS 1 MM Corrugated bended sheet welded on MS frame. (e) Post corner-2.5 X 2.5 square pipe (f) Internal wall paneling-8mm thick MDF sheet will be applied on wall. (g) Door-Frame work by 3 X 6.5 square pipe external wall made by MS sheet & inner wall decorated by 8MM laminated board. IF handle and Hold Draft.(Suitable lockable arrangement) (h) Insulation-25 MM thick glass wool shall be used for wall and 50MM thick glass wool to be provided for roof which will be rot proof, fire retardant, non-hygroscopic and vermin proof.(DENSITY 16KG/M3 OF TWIGA BRAND) (j) Window-3’ x 3’ window shall be aluminium double shutter sliding type with black powder coating & grill 4 mm thick glass shall be clear.(With Monsoon shade and safety grill) (k) Paint-Epoxy zinc phosphate primer and synthetic epoxy paint used for final 2 coats(Corrosion free and fire proof paints)

(l) Electric-Concealed Electrical Copper cables & wiring suitable for 250 volts 50 Hz single phase AC power supply. Copper cables used are of 2.5 mm for lighting circuits. ISI mark & concealed PVC conduits insulted copper wire used for wiring in PVC conduit with small size distribution board with MCB and proper electrical Earthing protection and to separate with main power supply. HEAT RESISTANT FLAME RESISTANCE. (m) Flooring-18MM thick cement board with PVC vinyl carpet 1.2mm thick (n) Legs-6 inch height legs will provided to the container. (o) Lifting hook-Specially formed hooks will be there at all two corners of top for easy lifting and shifting. (p) Bulked light-Two bulked light will be provided outside the cabin above the door. Fan-04 Nos LED light-08 Nos Normal window-04 Nos ACprovision-02 Nos 15 Amps S/S on individual board-04 Nos Amps S/S on individual board-06 Nos MCB D.B. 8 way with MCBS Main door-02 Nos Switch board Electric wiring

Supply & fix Prefab containers of standard size(12ft x 4ft x 8.6ft) with flat roof and standard quality as in toilets with all required sanitary fittings as per following manufacturer specifications.. (a) Size- 12 X 4 X 8.6FT Portable Toilet Cabin (b) Structure- 4X2 inch – square pipe, Cross Member of 3 X 1.5 inch square pipe, overall framework, internal, external cladding with insulation & other peripherals. (c) Roof-Plain roof of MS plane sheet welded with MS frame structure Adequate roof bows top inner decorated with 8mm thick MDF laminated board (d) Outer wall-MS 1 MM Corrugated bended sheet welded on MS frame (e) Post corner-2.5 X 2.5 square pipe (f) Internal wall paneling-4mm thick ACP sheet will be applied on wall. (g) Door-Frame work by 2 X 6.5 square pipe external wall made by MS sheet & inner wall decorated by 8MM laminated board. IF handle and Hold Draft. (Suitable lockable arrangement) (h)Paint-Epoxy zinc phosphate primer and synthetic epoxy paint used for final 2 coats (Corrosion free and fire proof paints) (j) Electric-Concealed Electrical Copper cables & wiring suitable for 250 volts 50 Hz single phase AC power supply. Copper cables used are of 2.5 mm for lighting circuits. ISI mark & concealed PVC conduits insulted copper wire used for wiring in PVC conduit with small size distribution board with MCB and proper electrical Earthing protection and to separate with main power supply (k) Flooring-18MM thick cement board with PVC vinyl carpet 1.2mm thick

(l) Color-As per directed by GE (m) Delivery period-10 Days (n) Legs-6 inch height legs will provide to the container. (o) Lifting hook-Specially formed hooks will be there at all two corners of top for easy lifting and shifting. (p) Bulked light-Two bulked light will be provided outside the cabin above the door. Ex Fan-03 Nos LED light-03 Nos Main door-03 Nos Urinal-02 Nos Western-02 Nos Wash basin-03 Nos Switch board Electric

Material & labour for plain Cement concrete, type D2, (1:4:8), (using 40mm graded stone aggregate) in foundation and filling mass concrete complete all as specified and as directed by Engineer-in-Charge.

Material & labour for Precast cement concrete block masonry with solid blocks exc 10cm in width Type C1 (1:3:6) (using 20mm graded stone aggregates) and setting in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

Material & labour for providing cement concrete type B1, 1:2:4 type B1 (20 mm graded stone aggregate) as in RCC/PCC coping, bed block for hold fast etc incl necessary form work complete all as specified and directed by Engineer-in-Charge.

Material & labour for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed by Engineer-in-Charge.

Material & labour for preparing new or previously untreated steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide or zinc chrome primer on steel surfaces complete all as specified and directed by Engineer-in-charge.

BHAVANI PROVISION STORES