Repairing work of SDF Buildings Toilet (i.e. SDF 1,2,3) at KASEZ, Gandhidham.

ABSTRACT OF COST

Sr. No. Description Amount (Rs)

1 Concrete Work ₹ 7,23,852.50

2 Cladding Work ₹ 26,97,519.25

3 Wood and PVC Work ₹ 21,15,574.75

4 Flooring Work ₹ 12,06,205.00

5 Roofing Work ₹ 31,310.00

6 Finishing Work ₹ 34,705.00

7 Dismantling and Demolishing Work ₹ 6,74,922.70

8 Sanitry Installations Work ₹ 10,81,704.15

9 Water Supply Work ₹ 2,08,083.50

10 Aluminium Work ₹ 1,02,087.00

11 Water Proofing Work ₹ 9,23,520.00

12 Repair, rehabilitation and retrofitting ₹ 5,25,000.00

Total Amount ₹ 1,03,24,484.00

Total Amount ₹ 1,03,24,484.00

Digitally signed by SHUBHAM

NBCC (India) Limited

( A Government of India Enterprises )

Repairing work of SDF Buildings Toilet (i.e. SDF 1,2,3) at KASEZ, Gandhidham.

BILL OF QUANTITIES

Sr. No. Description. Unit BOQ Qty. BOQ Rate BOQ Amount

Sub Head: Concrete Work

Providing and laying in position cement concrete of specified grade excluding

the cost of centering and shuttering - All work up to plinth level :

1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40

mm nominal size)

Providing and fixing up to floor five level precast cement concrete solid block,

2 4.7 including hoisting and setting in position with cement mortar 1:3 (1 cement :

3 coarse sand), cost of required centering, shuttering complete :

1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded

stone aggregate 20 mm nominal size).

Total of Sub Head: Concrete Work 723852.50

Sub Head: Cladding Work

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded

and prepolished, machine cut for kitchen platforms, vanity counters, window

sills, facias and similar locations of required size, approved shade, colour and

3 8.2 texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse

sand), joints treated with white cement, mixed with matching pigment, epoxy

touch ups, including rubbing, curing, moulding and polishing to edges to give

high gloss finish etc. complete at all levels.

8.2.2 Granite of any colour and shade

b 8.2.2.2 Area of slab over 0.50 sqm Sqmt. 25.00 5136.30 128407.50

Providing edge moulding to 18 mm thick marble stone

4 8.3 counters, Vanities etc., including machine polishing to edge to give high gloss

finish etc. complete as per design approved by Engineer-in-Charge.

8.3.2 Granite work Metre 65.00 510.95 33211.75

Sr. No. Description. Unit BOQ Qty. BOQ Rate BOQ Amount

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:

15622 (thickness to be specified by the manufacturer), of approved make, in

all colours, shades except burgundy, bottle green, black of any size as

approved by Engineer-in-Charge, in skirting, risers of steps and dados, over

12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and

jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white

cement mixed with pigment of matching shade

Total of Sub Head: Cladding Work 2697519.25

Sub Head: WOOD AND PVC WORK

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic

6 9.96 coating not less than grade AC 10 as per IS : 1868) transparent or dyed to

required colour or shade with nuts and screws etc. complete :

Providing and fixing aluminium tower bolts ISI marked anodised (anodic

7 9.97 coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to

required colour or shade with necessary screws etc. complete :

Providing and fixing aluminium handles ISI marked anodised (anodic coating

8 9.100 not less than grade AC 10 as per IS : 1868) transparent or dyed to required

colour or shade with necessary screws etc. complete :

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a

wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet,

mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15

mm M.S. square tube, the vertical door frame profiles to be reinforced with

19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to

be provided throughout the frame. The door frame to be fixed to the wall

using M.S. screws of 65/100 mm size, complete as per manufacturer’s

specification and direction of Engineering-Charge.

Sr. No. Description. Unit BOQ Qty. BOQ Rate BOQ Amount

Providing and fixing factory made panel PVC door shutter consisting of frame

made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for

styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of

steel primers of approved make and manufacture. M.S. frame covered with 5

mm thick heat moulded PVC ‘C’ channel of size 30 mm thickness, 70 mm

width out of which 50 mm shall be flat and 20 mm shall be tapered in 45

degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC

sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45

degree on the inner side to form top and bottom rail and 115 mm wide PVC

10 9.120 sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both

sides to form lock rail. Top, bottom and lock rails shall be provided both side of

the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided

as gap insert for top rail & bottom rail, panelling of 5 mm thick both side PVC

sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7

mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and

joined together with solvent cement adhesive. An additional 5 mm thick PVC

strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using

PVC solvent adhesive etc. complete as per direction of Engineer-in-charge,

manufacturer’s specification & drawing.

9.120.2 30 mm thick pre laminated PVC door shutters Sqm 400.00 3663.80 1465520.00

Total of Sub Head: WOOD AND PVC WORK 2115574.75

H Sub Head: Flooring Work

Providing and laying ceramic glazed floor tiles 300 x 300 mm (thickness to be

specified by the manufacturer) of 1st quality conforming to IS 15622 of

11 11.37 approved make in all colours such as white, Ivory, Grey, Fume Red Brown laid Sqm 1100.00 1096.55 1206205.00

on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) including

pointing the joints with white cement and matching pigment etc. complete.

Total of Sub Head: Flooring Work 1206205.00

Sub Head: ROOFING Work

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes

conforming to IS : 13592 Type A, including jointing with seal ring conforming

to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed

Total of Sub Head: ROOFING Work 31310.00

Sr. No. Description. Unit BOQ Qty. BOQ Rate BOQ Amount

Sub Head: Finishing Work

13 13.1 12 mm cement plaster of mix:

Total of Sub Head: Finishing Work 34705.00

Sub Head: Dismantling and Demolishing Work

Demolishing cement concrete manually/ by mechanical means including

14 15.2 disposal of material within 50 metres lead as per direction of Engineer - in -

15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) Cum 80.00 1503.60 120288.00

Demolishing R.C.C. work manually/ by mechanical means including stacking of

14 15.3 steel bars and disposal of unserviceable material within 50 metres lead as per Cum 40.00 3551.25 142050.00

direction of Engineer - in- charge.

Demolishing brick work manually/ by mechanical means including stacking of

15 15.7 serviceable material and disposal of unserviceable material within 50 metres

lead as per direction of Engineer-in-charge.

15.7.4 In cement mortar cum 5.00 2060.20 10301.00

Dismantling doors, windows and clerestory windows (steel or wood) shutter

16 15.12 including chowkhats, architrave, holdfasts etc. complete and stacking within

50 metres lead :

15.12.1 Of area 3 sq. metres and below Each 216.00 367.20 79315.20

Taking out doors, windows and clerestory window shutters (steel or wood)

including stacking within 50 metres lead :

15.13.1 Of area 3 sq. metres and below Each 216.00 143.50 30996.00

Dismantling tile work in floors and roofs laid in cement mortar including

stacking material within 50 metres lead.

15.23.1 For thickness of tiles 10 mm to 25 mm sqm 2000.00 73.40 146800.00

Disposal of building rubbish / malba / similar unserviceable, dismantled or

waste materials by mechanical means, including loading, transporting,

unloading to approved municipal dumping ground or as approved by Engineer-

in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Total of Sub Head: Dismantling and Demolishing

Sub Head : SANITARY INSTALLATIONS

Sr. No. Description. Unit BOQ Qty. BOQ Rate BOQ Amount

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with

100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing

20 17.1 cistern, including flush pipe, with manually controlled device (handle lever)

conforming to IS : 7231, with all fittings and fixtures complete including

cutting and making good the walls and floors wherever required :

White vitreous china Orissa pattern W.C. pan of size 580x440 mm with

integral type foot rests.

Providing and fixing white vitreous china pedestal type water closet (European

type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing

21 17.2 cistern with manually controlled device (handle lever) conforming to IS: 7231,

with all fittings and fixtures complete including cutting and making good the

walls and floors wherever required.

17.2.1 W.C. pan with ISI marked white solid plastic seat and lid each 36.00 6515.55 234559.80

Providing and fixing white vitreous china flat back or wall corner type lipped

front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively

with automatic flushing cistern with standard flush pipe and C.P. brass

spreaders with brass unions and G.I. clamps complete, including painting of

fittings and brackets, cutting and making good the walls and floors wherever

17.4.4 Range of four urinal basin with 10 litre white P.V.C. automatic flushing cistern each 18.00 18579.95 334439.10

Providing and fixing wash basin with C.I./ M.S. brackets 15 mm C.P. brass

23 17.7 pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of

fittings and brackets, cutting and making good the walls wherever require

White Vitreous China Flat back wash basin size 550 x 400 mm with single 15

mm C.P. brass pillar tap

Providing & fixing PVC waste pipe for sink or wash basin icluding PVC waste

fitting Complete.

17.28.2 Flexible Pipe

Providing and fixing 600 x 450mm bevelled edge mirror of superior glass (of

25 17.31 approved quality) complete with 6mm thick hard board ground fixed to Each 45.00 1607.95 72357.75

wooden cleats with C.P. brass screws and washers complete.

26 17.34 Providing and fixing toilet paper holder :

Sr. No. Description. Unit BOQ Qty. BOQ Rate BOQ Amount

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high

and 112 mm distance from wall of standard shape with bracket of the same

materials with snap fittings of approved quality and colour, weighing not less

Providing & fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm

28 17.72 wide with minimum distances of 37 mm from wall face with concealed fittings EACH 45.00 231.95 10437.75

arrangement of approved quality and colour weighing not less than 88 gms

Total of Sub Head: SANITARY INSTALLATIONS 1081704.15

Sub Head : WATER SUPPLY

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having

thermal stability for hot and cold water supply, including all CPVC plain and

brass threaded fittings including fixing the pipe with clamps at 1.00 mt

spacing. This includes jionting of pipes and fittings with one step CPVC solvent

cement and the cost of cutting chases and making good the same including

testing of joints complete as per the direction of engineer incharge

concealed work, including cutting chases and making good the wall etc.

18.8.1 15 mm nominal outer dia pipes RMT 50.00 497.80 24890.00

18.8.2 20 mm nominal outer dia pipes RMT 30.00 537.60 16128.00

18.8.3 25 mm nominal outer dia pipes RMT 20.00 627.25 12545.00

Providing and fixing C.P. brass bib cock of approved quality conforming to

Providing and fixing C.P. brass stop cock (concealed) of standard design and

of approved make conforming to IS:8931.

Total of Sub Head: WATER SUPPLY 208083.50

Sub Head:Aluminium Work

Sr. No. Description. Unit BOQ Qty. BOQ Rate BOQ Amount

Providing and fixing aluminium work for doors, windows, ventilators and

partitions with extruded built up standard tubular

sections/appropriate Z sections and other sections of

approved make conforming to IS: 733 and IS: 1285, fixing with dash

fasteners of required dia and size, including necessary filling up the

gaps at junctions, i.e. at top, bottom and sides with required EPDM

rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust

free, straight, mitred and jointed mechanically wherever required including

cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass /

stainless steel screws, all complete as per architectural drawings and the

directions of Engineer-in-charge. (Glazing, paneling and dash fasteners

to be paid for separately) :

21.1.1 For fixed portion

Anodised aluminium (anodised transparent or dyed to required shade

according to IS: 1868, Minimum anodic coating of grade AC 15).

For shutters of doors, windows & ventilators including providing and

fixing hinges/ pivots and making provision for fixing of fittings wherever

required including the cost of EPDM rubber / neoprene gasket required

(Fittings shall be paid for separately).

Anodised aluminium (anodised transparent or dyed to required shade

according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing glazing in aluminium door, window, ventilator

shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete

as per the architectural drawings and the directions of engineer-in-

charge . (Cost of aluminium snap beading shall be paid in basic item):

21.3.2 With float glass panes of 5 mm thickness Sq.m 50.00 1505.25 75263.00

Total of Sub Head:Aluminium Work 102087.00

Sub Head : Water Proofing

Providing and laying water proofing treatment to vertical and horizontal

surfaces of depressed portions of W.C. kitchen and the like consisting of:

Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing

i). compound conforming to IS 2645 in recommended proportions including

rounding off junction of vertical and horizontal surface.

IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed

ii). with water proofing compound in recommended proportion including rounding

off junction of vertical and horizontal surface.

Sr. No. Description. Unit BOQ Qty. BOQ Rate BOQ Amount

IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per

IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet

iv). should be 100 mm wide and pasted to each other with bitumen @ 1.7 Sqm 1200.00 769.60 923520.00

Total of Sub Head: Water Proofing 923520.00

Sub Head:- Repair, rehabilitation and retrofitting

Single Part PMM Treatment: Providing and laying of polymer

modified single component, alkaline resistant fibre reinforced, duel

shrinkage-compensated, thixotropic, cementations patch repair mortar

Emaco S48CT of BASF/ Renderoc SP 40 of Fosroc or equivalent material

that achieves compressive strength of 35 MPa at 7 days and finishing

with trowel carefully compacting the same around the rebars and

finishing to bring it in line with existing concrete surface on the beams, slabs.

pile caps etc., where the thickness of application is less than 50mm in

patches as per specification after applying bonding coat (bonding

coat shall be payable separately). Item rate inclusive of all materials,

labours, supervision, tools, tackles, etc., complete as per the manufacturing

specification and as per the direction the Engineer-in-charge.

(a) For Built up thickness of up to 40 mm (incl.+5mm) Sqm 250.00 2100.00 525000.00

Total of Sub Head:- Repair, rehabilitation and retrofitting 525000.00

Total Civil Work 10324484.00