Loading…
Loading…
Tender ID
Tender Value
₹23.6 L
EMD Value
₹50,000
Closing Date
13 Mar 2026, 2:00 pmClosed
The Executive Engineer
Office of the Executive Engineer,PWD,Buildings Division Ernakulam
for Maintenance of faculty apartment
2026_PWD_843793_1
PWD/BLDG/TR/582/2023_5_1_1/1
Open Tender
Civil Works - Buildings
Item Rate
120 days
Athani
Please refer Tender documents.
11 documents required · 11 mandatory
₹2,760
Yes
₹50,000
Yes
4 Mar 2026
4 Mar 2026
16 Mar 2026
4 Mar 2026
13 Mar 2026
4 Mar 2026
13.88:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
13.80:Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
OD221080/2022-2023:Dismantling and removing MP tiles over the roof
OD275085/2022-2023:Supplying 1st quality concrete tiles of size 30x40cm or nearest available size 10 to 20mm curvature thick of desired colours (Monier Elabana or Equivalent)
OD275087/2022-2023:Roofing with concrete roof tiles 30*40mm or nearest available size including all labour charges etc..complete...
OD221085/2022-2023:Supplying 1st quality Valley sheet of size 120x36cm.
OD275077/2022-2023:Supplying 1st quality Tile clips to retain tiles in position
OD275080/2022-2023:Supplying 1st quality concrete Barge Tile of size 42cm length or nearest available size 10 to 20mm curvature thick of desired colours (Monier Elabana or Equivalent)
OD275081/2022-2023:Supplying 1st quality concrete 3 way apex Tile of size 45x45x45cm or nearest available size 10 to 20mm curvature thick of desired colours (Monier Elabana or Equivalent)
OD275082/2022-2023:Supplying 1st quality concrete Ridge end Tile of size 45x25cm or nearest available size 10 to 20mm curvature thick of desired colours (Monier Elabana or Equivalent)
OD275083/2022-2023:Supplying 1st quality concrete Hip starter of size 45x25cm or nearest available size 10 to 20mm curvature thick of desired colours (Monier Elabana or Equivalent)
OD275084/2022-2023: Supplying 1st quality concrete ridge tiles of size 45x25cm or nearest available size 10 to 20mm curvature thick of desired colours (Monier Elabana or Equivalent)
OD275206/2022-2023:Supplying 1st quality Screws to fix the tiles in position.
OD275202/2022-2023:Supplying 1st quality Top Flex of 25cm width.
OD275200/2022-2023:Supplying 1st quality Valley sheet of size 120x36cm.
50.18.8.9.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC Solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 110 mm pipe 4 kgf/cm2
50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
OD223865/2022-2023:Providing & fixing PC compact sheet 2.5mm crystal royal blue as approved by the Engineer in charge and should be supplied in a single length of 12 M or as decide by the Engineer in charge. The sheets shall be fixed using self drilling / self tapping screw of size (5.5x55 mm) with EPDM seal complete upto any pitch in horizontal/ vertical/ curved surface, but excluding the cost of purlins, rafters, trusses, and including cutting to size shapes where ever required.
13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work
15.23.1:Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm
11.37:Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete
8.31:Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
17.2.1:Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid
15.2.2:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:4:8 or leaner mix ( including equivalent design mix)
4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
50.18.9.22.3:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement-110 mm dia Door Elbow
50.18.9.22.4:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.05 MB
BOQ_1424311.xls
BOQ • 0.32 MB
viewsbd.pdf
Tender Documents • 1.63 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .