VIII.11014/9032/2025/HQ 21 Sect AR

SCHEDULE ‘A’ PART-I ( Widenibg of Road)

Preparation and consolidation of sub grade with power road roller of 8 to 12 tone capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc and re rolling the sub grade and disposal of surplus earth with lead upto 50 m.

Supply and stacking at site of 90mm to 45mm size stone aggregates.

Supply and stacking at site of 63 mm to 45 mm size stone aggregates.

Supply and stacking at site moorum for 75 mm WBM @ 0.09 cum/10 sqm .

Laying, spreading and compacting stone aggregates of specified sizes to WBM specifications in uniform thickness , hand picking , rolling with 3 wheeled road/ vibratory roller 8-10 tone capacity in stages to proper grade and camber , applying and brooming requisite type of screening/binding material to fill up interstices of coarse aggregates watering and compacting to the required density.

Providing and laying semi- dense Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in Charge 25 mm compacted thickness with bitumen of grade VG 30 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity.

Providing and applying tack coat using bitumen emulsion conforming to IS : 8887 using emulsion pressure distributor including cleaning and preparing the existing road surface as per specifications. (On bituminous surface. @ 0.25 Kg / sqm)

Painting road surface marking with adequate nos of coats to give uniform finish with ready mixed road marking paint conforming to IS : 164, on bituminous surface in white/yellow shade, including cleaning the surface of all dirt, scales, oil, grease and foreign material etc complete.

Supply and Fixing cat eye road stud in two side of road surface Specification

Supply and Fixing solar type cat eye road stud in two side of road surface Specification 125x125x25mm

Supply and Fixing convex mirror with pole mounting bracekt incl all, Dia 60 cm, 80x20x80 cm weight not les then 2 Kg

SCHEDULE ‘A’ PART-II (RCC DRAINS) 400.00 mtrs

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m inwidth or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering, all work up to plinth 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Providing and laying formwork to sides of concrete including strutting, propping etc and removal of form for Foundations, footings, bases of columns, etc. for mass concrete

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and laying 15mm thick cement plaster on rough side of brick wall finished with a floating coat of neat cement of mix (1:4)

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.MS Channel 100 x 50 mm , MS Flate Iron 50 x 6 mm etc

SCHEDULE ‘A’ PART-III ( PROTECTIVE WALL) 300.00 mtrs

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in fdn trenches ( not exc 1.5m in width or 10 sqm on plan ), incl dressing of sides and ramming of bottoms lift upto 1.5 m incl getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m in all kind of soil.

Providing and laying in position cement concrete of specified grade with cement mortar (1:4:8) with graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying 50 mm thick cement concrete 1;2;4 (1 cement: 2 coarse sand :4 graded stone 20 mm nominal size aggregate), excluding the cost of centering and shuttering in copping.

Providing and fixing Pre Cast cement concrete block in bed plates for weep hole with cement concrete 1:3:6 PCC (1 cement:3 coarse sand: 6 graded stone aggregate 20 mm nominal size)

Providing and fixing on wall unplasticised rigid PVC pipes 75 mm dia weep holes

Centering and shuttering incl strutting, propping etc complete and removal of form work for copping.

1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources)

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

SCHEDULE ‘A’ PART-IV (RCC GATE)

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches ( not exc 1.5m in width or 10 sqm on plan ), incl dressing of sides and ramming of bottoms lift upto 1.5 m incl getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m in all kind of soil.

Providing and laying in position cement concrete of specified grade with cement mortar 1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering.

Providing and laying in position reinforced cement concrete (1:1½ : 3 ) with 20 mm nominal size stone aggregates , excluding the cost of centering, shuttering, finishing and reinforcement , all work upto plinth level.

Providing and laying in position reinforced cement concrete (1:1½ : 3 ) with 20 mm nominal size stone aggregates , excluding the cost of centering, shuttering, finishing and reinforcement above ground level.

roviding and laying formwork to sides of concrete including strutting, propping etc and removal of form for foundations, footings, bases of columns etc.

Providing and laying formwork to sides of concrete including strutting, propping etc and removal of form for columns,plinth beam, copping and link beam etc.

Providing and placing steel reinforcement above 10mm dia for RCC work incl straightening, cutting, bending , placing in position and binding etc all complete. ( TMT bar).

Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite stone slab colour black, Cherry/Ruby red

Providing and painting with water proofing cement paint of reqd shade on new work ( one or more coat applied @ 2.20 kg per 10 sqm ).

Providing and fabricating, erecting of steel work in built up section/frame work incl cutting, hoisting, fixing in position and applying a primer coat of approved steel primer all complete.

Providing and painting two or more coats with synthetic enamel paint of approved brand and manufacturer to give an even surface on new steel work.

SCHEDULE ‘A’ PART-V (SITE DEVELOPMENT / EARTH WORK)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge 15 mm nominal dia Pipes making good the Wall the for Explosed on wall.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge 20 mm nominal dia Pipes making good the Wall the for Explosed on wall

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge 25 mm nominal dia Pipes making good the Wall the for Explosed on wall

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge 80 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge 50 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cem

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge 32 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge 20 mm nominal dia Pipes

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc 100 mm diameter.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 25 mm nominal bore.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 50 mm nominal bore.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 80 mm nominal bore.

Providing and fixing brass stop cock of approved quality 15 mm nominal bore

Providing and fixing brass stop cock of approved quality 20 mm nominal bore

Making connection of G.I. distribution branch with G.I. main of followingsizes by providing and fixing tee, including cutting and threading the pipe etc. complete 25 to 40 mm nominal bore

Providing and fixing gun metal non- return valve of approved quality (screwed end 80 mm nominal bore

Providing and fixing brass bib cock of approved quality 15 mm nominal bore

Providing and fixing brass bib cock of approved quality 20 mm nominal bore

Supplies and installed pumping sets Centrifugal electric 415 volt 03 phase 290 RPM, industrial patten bazz up elbow multistage driven complete 20 WHP including suitable starter and PCC foundation all as specified and directed by Engineer in charge.

Supplies and installed Iron Removal Filter 10,000 GPH Model: VIR Ferrotreat 101020 FC, Vertical , Single Deck, Shell ISS: 2062 mild steel size 1000 mm dia X 1200 mm height, Thickness of Body, Dish end & Bed plate 6 mm x 8 mm simultaneously, Catalytic media MnO2 compound - 840 kgs / 24 cft,Shell ISS: 2062 mild steel size 2000 mm dia X 1,800 mm SOH, Thickness of Body, Dish end & bed plate 08 mm x 10 mm x 12 mm simulteniously,Frontal (face) pipe line Will be fabricate from 100 mm ERW pipe ( medium ) Valves in frontal pipe line 100 mm C I Butter Fly valve flangeless finish - 05 Nos ,Sand & gravels ( Filter media ) quantity 120 Cft cft / 3.428 CuM, Catalytic media MnO2 compound – 595 kgs / 17 cft, Pressur gauge & sampling cock 02 set – 01 for raw water and other for filter wate, Under drain systemBed plate with double nut strainer – 306 nos,Air Compressor Model: DH – 09 fitted with V-Belt, Belt guard, autocut switch and 3 HP motor 12 cfm / 11 kgs pressure Chlorination system Dosing pump RC – 11 cap: 6 LPH / 04 kgs pressure in capacity FRP solution preparation cum settling tank fitted with S S – 304 agitator model: CDS – 100

Supply only feric alum suitable for water treatment chemical

LAYING LT UG CABLE

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling for passing of cable or fixed to wall by necessary clamps/nut/bolts etc as required including taking down of existing GI tubing complete all as 80 mm nominal bore as directed

Supply and fixing for feeder pillar box outdoor type CPRI approved double door, vermin and weather proof of over all dimension (0.8 x 0.80 x 0.50 m) made out of 3 mm thick CRCA sheet including canopy type roof 15 cm extended in all side and two part hinged door in fornt side with locking arrangement and gasket arrangement with one nose pad lock of 7 lever and three noskey and back side fixed with nuts and gaskets,including provision of one set of bus bar of 200 and provision of 06 nos hole for incomer and outgoing cable connection ) fixed on porcelain insulatopr and provision of cable gland for cable entry including two coated of powder coated paint complete and installation on PCC foundation grouted by using B1 1:2:4 (20 mm graded aggregate ) complete all as directed including provision of following :- (a) Incoming/Outgoing MCCB 4 pole (Ics=100%) with thremal magnetic release,adjustable short circuit & adjust overload seeting, Suitable for isolation having breaking capacity 25 KA of rating 100 Amps with suitable size aluminium connection busbers covered with PVC sleeves for incoming & out going side of MCCB's inside the feeder piller box, all as directed as per site.(b) Outgoing MCCB 4 pole (Ics=100%) with thremal magnetic release,adjustable short circuit & adjust overload seeting, Suitable for isolation having breaking capacity 25 KA of rating 63 Amps 02 Nos & MCCB 4 pole (ICs= 100%)withthremal magnetic release,adjustable short circuit & adjust overload seeting, Suitable for isolation having breaking capacity 25 KA of rating 32 Amps 01 Nos ( c) Aluminium strip should be in RYB-B colour code with heat shrinkable PVC sleeves and hole in busber strip as directed above

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 95 sq. mm and upto 185 sq. mm.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 35 sq. mm and upto 95 sq. mm.`

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 35 sq. mm and upto 95 sq. mm.

Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle ( 20mm X 60 cm ), 7/ 4.00 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required

Supplying and making straight through joint with cast resin compound including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 X 120 sq. mm

Supplying and making straight through joint with cast resin compound including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 X 120 sq. mm

Supply and Fixing Street light Control panel MCB TPN 63 A 01 Contactor TP 65 A. Astronomical timer, Street contron panel with accessories outdoor including connected switchgears ,cable etc and suitable sheet meal enclosure test and commissiong of panel of 25 x 3 mm angular base and vertical frame along with necessary PCC foundation grouted by using B1 1:2:4 (20 mm graded aggregated) locking arrangement. Complete all as specified and directed.

Material and labour for two core (for phase and netutral standred cable 4 Sqmm size,1100 volt grade,PVC insulated unsheathed aluminium cable in PVC conduit by using clamp,nut & bolts from junction box to street light fittings and testing complete all as directed.

Material and install electrical thimble for cable 120 Sqmm.(Alum)

Material and install electrical thimble for cable 95 Sqmm.(Alum)

Material and install electrical thimble for cable 35 Sqmm.(Alum)

Material and install electrical thimble for cable 35 Sqmm.(Alum)

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

63 amps. TPN, plug-in-box with TPN disconnector FSU and ISI marked HRC fuses for overhead busbar.

Constructing masonry Chamber 90 x 90 x 100 Cm inside, inbrick work in cement morter 1:4 for Cable , with C.I surface box 100mm top diameter ,160 mm bottom diameter and 180mm deep with chained lid and RCC top slab 1:2 i/c necessary excavation foundation concrete 1::10 and inside plasterning with Cement Morter 1:3 12 mm thick ,finished with a floating coat of net cement complete as per standard design:

GAWARIA INTERNATIONAL (BID ID -3262838)

J R Infratech (BID ID -3262835)

NASCENT ENTERPRISE (BID ID -3262843)

Satyam Contractors Pvt Ltd (BID ID -3251391)