Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.6 LAdmitted-Finance | ₹9.6 L | L1 | Admitted-Finance |
| 2 | L2₹28.3 L+₹18.8 L (196.3%)Admitted-Finance | ₹28.3 L+₹18.8 L (196.3%) | L2 | Admitted-Finance |
| Sl No | Description | Qty | Unit | RAO ELECTRICAL ENGINEERIONG WORKS L2 | VIVEK ENGINEERING WORKS L1 |
|---|---|---|---|---|---|
| 1.00STERN A-FRAME MAKER: Caley [email protected] [email protected] | |||||
| 1.10 | a) Aux winches (02Nos ) Overhauling of two auxiliary winches including inspection and servicing of brake systems and hydraulic manifold blocks .Spares required for overhauling of winches, hydraulic control valves and solenoids to be procured and supplied by vendor. | 2 | NOS | 2,20,000 ₹16,40,000 | 96,000 ₹2,40,000 Lowest |
| 1.20 | f) A-Frame HPU water cooled heat exchanger to be overhauled and pressure tested(Make: Bowman Model: GL480-1428-7 QTY-1). | 1 | NOS | 15,000 ₹55,000 | 28,000 ₹35,000 Lowest |
| 2.00SIDE A-FRAME MAKER: Caley [email protected] [email protected] | |||||
| 2.10 | c) Auxilary winch 5T capacity general overhauling to be carried out Hydraulic control valves solenoid valves and fittings to be renewed.Spares required for overhauling of winches, hydraulic control valves and solenoids to be procured and supplied by vendor. | 1 | NOS | 1,20,000 ₹2,70,000 | 1,12,000 ₹1,40,000 Lowest |
| 3.00MAGNETOMETER WINCH MAKER: Geometric - S | |||||
| 3.01 | HPU oil storage tank oil leakage to be identified and arrest the leak .Spares such as tank guage glass,draing plugs to be replaced if found defective.Drain plug to be rethreaded if found worn out ,any metal builtup needed to rectify the defect the same to be undertaken by vendor. | 1 | NOS | 15,000 ₹75,000 Lowest | 1,44,000 ₹1,80,000 |
| 4.00SEISMIC WINCH (AUX- WINCH LEAD WINCH & RAMP) MAKER: ROMICA ENGG / HHI - [email protected] [email protected] [email protected] [email protected] | |||||
| 4.01 | Overhauling of the hydraulic lever assembly including servicing of the manifold blocks.Spares required for o hydraulic control valves and solenoids to be procured and supplied by vendor | 3 | NOS | 90,000 ₹6,30,000 | 64,000 ₹2,40,000 Lowest |
| 4.02 | MOORING WINCH - TO REMOVE OLD WORN OUT BRAKE LINING AND FIT NEW BRAKE LINING (ASBESTOS FREE WITH CERTIFCATE TO BE PROVIDED) COUNTER SUNK SCREW TO USED ARE APPROX 200 Nos UPPER BAND LENGTH 1250 MM WIDTH 102 MM THKNESS 8 MM LOWER BAND LENGTH 975 MM WIDTH 102 MM THKNESS 8 MM .SPARES(BRAKE LININGS, COUNTER SUNK SCREWS) TO BE PROVIDED BY VENDOR. | 2 | NOS | 15,000 ₹1,60,000 | 48,000 ₹1,20,000 Lowest |
Tender Value
Refer Docs
EMD Value
₹25,000
Closing Date
8 Sept 2026, 11:00 amClosed
M (SRC-OS)
Ph.No. 9493792254
OVERHAULING OF VARIOUS HYDRAULIC WINCHES ON ORV SAMUDRA RATNAKAR
2026_HSL_100056_1
SR COMPLEX/PRODUCTION/OUT SOURCE REQUISITION/2026/347
Open Tender
Miscellaneous Services
Service
30 days
HSL, VISAKHAPATNAM
Please refer Tender documents.
5 documents required · 5 mandatory
₹0
₹25,000
Yes
19 Sept 2026
3 Sept 2026
8 Sept 2026
3 Sept 2026
8 Sept 2026
3 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1STERN A-FRAME MAKER: Caley [email protected] [email protected] | |||||
| 1.1 | a) Aux winches (02Nos ) Overhauling of two auxiliary winches including inspection and servicing of brake systems and hydraulic manifold blocks .Spares required for overhauling of winches, hydraulic control valves and solenoids to be procured and supplied by vendor. | 2 | NOS | - | - |
| 1.2 | f) A-Frame HPU water cooled heat exchanger to be overhauled and pressure tested(Make: Bowman Model: GL480-1428-7 QTY-1). | 1 | NOS | - | - |
| 2SIDE A-FRAME MAKER: Caley [email protected] [email protected] | |||||
| 2.1 | c) Auxilary winch 5T capacity general overhauling to be carried out Hydraulic control valves solenoid valves and fittings to be renewed.Spares required for overhauling of winches, hydraulic control valves and solenoids to be procured and supplied by vendor. | 1 | NOS | - | - |
| 3MAGNETOMETER WINCH MAKER: Geometric - S | |||||
| 3.01 | HPU oil storage tank oil leakage to be identified and arrest the leak .Spares such as tank guage glass,draing plugs to be replaced if found defective.Drain plug to be rethreaded if found worn out ,any metal builtup needed to rectify the defect the same to be undertaken by vendor. | 1 | NOS | - | - |
| 4SEISMIC WINCH (AUX- WINCH LEAD WINCH & RAMP) MAKER: ROMICA ENGG / HHI - [email protected] [email protected] [email protected] [email protected] | |||||
| 4.01 | Overhauling of the hydraulic lever assembly including servicing of the manifold blocks.Spares required for o hydraulic control valves and solenoids to be procured and supplied by vendor | 3 | NOS | - | - |
| 4.02 | MOORING WINCH - TO REMOVE OLD WORN OUT BRAKE LINING AND FIT NEW BRAKE LINING (ASBESTOS FREE WITH CERTIFCATE TO BE PROVIDED) COUNTER SUNK SCREW TO USED ARE APPROX 200 Nos UPPER BAND LENGTH 1250 MM WIDTH 102 MM THKNESS 8 MM LOWER BAND LENGTH 975 MM WIDTH 102 MM THKNESS 8 MM .SPARES(BRAKE LININGS, COUNTER SUNK SCREWS) TO BE PROVIDED BY VENDOR. | 2 | NOS | - | - |
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.84 MB
TBID347.pdf
Tender Documents • 0.37 MB
CQ347.pdf
Tender Documents • 0.83 MB
BOQ_109621.xls
BOQ • 0.29 MB
DUE_DATE_EXTENSION.pdf
PDF • 0.17 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .