PERIODICAL SERCICES, ROOF SHEETS, REPAIR TO CHAJJA, ROOF TREATMENT, FLOORING ALONG WITH SANITARY FITTINGS TO CERTAIN BLDGS IN SMQS, MES COLONY, CWE COLONY AND PICHORA AREA AT AF STN BHUJ

Amount

Material & labour for Preparation of old treated surfaces of wall including brooming down, scrapping down smoke soots etc. and appying one coat of white wash, complete all as specified and as directed by Engineer-in-Charge.

Material & labour for Preparation of old treated surfaces on ceiling including brooming down, scrapping down smoke soots etc. and appying one coat of white wash, complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Preparation of old treated surfaces of wall including brooming down, scrapping down smoke soots etc. and appying two coat of white wash complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Preparation of old treated surfaces of wall surfaces and applying one coat of distemper with distemper oil emulsion white or tinted over and complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Preparation of old treated surfaces of wall surfaces and applying two coat of distemper with distemper oil emulsion white or tinted complete all as specified and directed by Engineer-in-Charge.

Complete removal of existing treatment on wall surfaces and applying one coat of distemper with distemper oil emulsion white or tinted complete all as specified and directed by Engineer-in-Charge.

Material and labour for Preparation of old wooden painted surfaces of any description exc 10 cm width or girth and appying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Material and labour for Preparation of old steel painted surfaces of any description exc 10 cm width or girth and appying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of plastered or unplastered old decorated surfaces of wall and applying one coat of exterior emulsion paint complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of old plastered or unplastered old decorated surfaces of wall and applying two coat of exterior emulsion paint over a coat of water base primer complete all as specified and directed by Engineer-in-Charge.

Material and labour for writing letter or figures ( Block, roman , Italic or Indain ) n,exc 30 cm high using synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Material and labour for writing stops, commas , short lines, dashes , hypens , brackets etc using synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster any description on brick , block or stone walls etc including raking down joints hacking for key secrubing down with water etc any description etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for rendering on concrete surfaces 15mm thick in two layers first coat 15mm thick in CM 1:4 with water proofing compound @3% by wt of cement, finished even and fair etc complete all as specified and directed by Engineer-in-Charge.

Supply only water proofing compound complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation new plastered or unplastered old decorated surfaces of wall and applying two coat of exterior emulsion paint over a coa of water base primer complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete of any description and any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge.

Taking down existing water proofing tretment on RCC slab / beams with bitumen felt with out damaging structure and removing the debrise outside the MD land and M&L for plaster 10 mm thck on concrete surfaces in cement mortar 1:3 finished even and smooth using WPC @ 3% by weight of cement and preparing the surfaces to recive WPT treatment , applying a coat of bitumenm primer confirm to IS - 3384-1986 @ 3% per sqm . providing APP modified memrane with non woven polyster reinforcement/mat ( centre core) by tourch application over primed surfaces complete all as specified and directed by Engineer-in-Charge.

Material & labour for cement concete type B-1,1:2:4 mix (using 20 mm grade stone aggregate) as in copings including necessary form work complete all as specified and directed by Engineer-in-Charge.

Dismantling wall and ceiling boards, any thickness including cover fillets, grid work of any description complete all as specified and directed by Engineer-in-Charge.

Supply & fix anodised aluminium snap grid frame work for false ceiling all as specified size of grid 605X605 mm complete all as specified and directed by Engineer-in-Charge.

Material & labour for 12 mm thickness perforated particle board / tiles for insulation and accoustic purpose 60X60 cm in size fixed with nails to timber frame work or with staples on snap grid in false ceiling complete all as specified and directed by Engineer-in-Charge.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

Material & labour for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

Material & labour for Glazed ceramic coloured tiles in vertical surfaces such as in skirting and dados 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over plaster in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhat or frames with shutter (without taking off shutters from the frames) n exc 1.5 sqm complete all as specified and directed by Engineer-in-Charge. .

Taking down chowkhat or frames with shutter (without taking off shutters from the frames) exc 1.5 sqm but n.exc 4.00 sqm complete all as specified and directed by Engineer-in-Charge.

Supply & fix PVC door PDS-01 comprising of shutter and frame of Make : Accura Polytech Pvt Ltd (Accucel) all as shown on drg No.CEAA/TD/149 sheet No. 1/1 (PVC RIGIDE FOAM) , door frame/ chowkhats of solid rigid foam profile FP-6030 and shutter of solid PVC foam profile FP 7114 with 4 mm thick high pressure compact laminate as infill (Panel) including necessary hardeware fittings complete all as specified and directed by Engineer-in-Charge.

Material & labour for aluminium window with double side hung shutter for glazing and gauging and frame with one or more rebates made out of JINDAL/ INDAL anodised aluminium section including section for fixing of aluminium grills with suitable fixtures, jointing cleats for fixing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium beading screws, type B20 100mm long suitable handle and anodised aluminum fittings such as stay, hinges glazing with 5 mm thick tinted sheet glass and gauging with aluminium wire cloth of size 0.45mm dia of wire and 1.40mm aperture as per drg No. CEAA/TD/133 sheet No. 1/2 and 2/2 dated 13.12.02 except fixed glazing (FG) complete all as specified and directed by Engineer-in-Charge.(Tint of glass shall be approved by GE) Note :- Aluminium grill fixed under above item shall be measured and paid separately

Supply , fabricate & fix anodised (15 micron) aluminium sliding windows/ ventilators made out of Jindal/Hindalco Aluminium sections as in frames , sliding/ fixed shutters etc. With one or more rebates incl. Jointing cleats & locking arrangements complete all as specified & as per manufacturer's instruction. Note- Quoted rate shall deemed to be included for supply of aluminium sections, fabricate & fixing in position of window frames & shutters, locking arrangements complete all as specified and directed by Engineer-in-Charge.

Material & labour for 3.00 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each pane. for fixing in aluminium sliding windows. Note- Rubber beading shall be measured & paid seperately complete all as specified and directed by Engineer-in-Charge.

Supply & fix rubber beading for fixing of glass of item No 30 above complete all as specified and directed by Engineer-in-Charge.

Supply & fix stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed wih stainless steel wire staples complete all as specified and directed by Engineer-in-Charge.

Supply only aluminium anodised grill of approved shape with opening in grill 66mm x 80mm (diagonally) or nearest to + 5mm made out of standard aluminium moulded section of size 6mm x 7mm complete all as specified and directed by Engineer-in-Charge

Supply & fix in repairs vitreous china wash basin, angle back, size 550x400mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs for pillar taps of 15 mm bore, fancy type with capstan head, chromium plated, screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe & fixed complete all as specified and directed by Engineer-in-Charge.

Supply & fix of waste pipe of 32mm dia PVC pipe for WHB with long screwed shanks and fly nut flange end beddedd in red lead cement and other end fixed complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs for Vitrious china squattin pan ,Orrissa Paattern Size 580x440 mm white with integral foot rests ( Excluding flushing cistern and flush pipe) complete all as specified and directed by Engineer-in-Charge

Supply & fix in repairs vitreous china wash down water closet pan (pedestal pattern) white (excluding, flushing cistern and flush pipe) complete connected to p trap complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs for grating square 150mmx150mm size of stainless steel complete all as specified and directed by Engineer-in-Charg

Supply & fix in repairs PVC low level valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, flaot and handle including brackets of 10 Ltr capacity complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs for bib taps, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for size 15mm bore complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs stop valve 15 mm dia cast chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs for brass CP mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete unreinforced in ground floors and pavings n.exc 15cm thick (below or above ground level) complete all as specified and directed by Engineer-in-Charge.

Material & labour for 75 mm thick cement concrete type C-2 (1:3:6) using 40 mm graded stone aggregate as in sub base under interlocking tiles complete all as specified and directed by Engineer-in-Charge.

Material & labour for 60 mm thick (M-35 mix) with grey cement and pigment, glossy rubber mould interlocking tiles (paver blocks red & yellow colour topping) conforming to IS-15658-2006 laid dry over 30 mm thick compacted sand bed, size & pattern of tiles complete all as specified and directed by Engineer-in-Charge. Make Supreme/Mehtab or any other ISI marked as approved by GE

Material & labour for Fine aggregate (sand) complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs rotational moulded polythene white water storage tank triple layered (Cylindrical, vertical with closed top, ISI marked) hoisted and fixed in position all as specified in SSR- Part-I of capacity 500 ltrs including taking down existing tank also including provision of 20mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs rotational moulded polythene white water storage tank triple layered (Cylindrical, vertical with closed top, ISI marked) hoisted and fixed in position all as specified in SSR- Part-I of capacity 750 ltrs including taking down existing tank also including provision of 20mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs rotational moulded polythene white water storage tank triple layered (Cylindrical, vertical with closed top, ISI marked) hoisted and fixed in position all as specified in SSR- Part-I of capacity 1000 ltrs including taking down existing tank also including provision of 20mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) complete all as specified and directed by Engineer-in-Charge.

Taking up or down following size of steel tubing and connections including removal to store for reuse or credit to contractor Note : (a) The rates apply to pipes above or below ground only in repairs and alterations. (b) 'The rates for taking down piping, etc., and removing to store include disconnection of fittings from tubing, where required complete all as specified and directed by Engineer-in-Charge.

15mm bore of pipe

20mm bore of pipe

25mm bore of pipe

Supply & fix CPVC pipes ISI marked, IS-15778 with all fittings for hot and cold water, fixed with solvent cement complete to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge of following sizes:

15mm nominal dia of pipes

20mm nominal dia of pipes

25mm nominal dia of pipes

Dismantling of cast iron,PVC or reinforced concrete pipes jointed in cement mortar/solvent cement etc. and taking out of trenches if required complete all as specified and directed by Engineer-in-Charge following bore of pipe

100/110mm dia of pipes

75mm dia of pipe

Supply & fix UPVC ultra drain, pipes, single socketed, ISI marked, IS-13592 type 'B' in any length, jointed with solvent cement fixed in walls and floors complete all as specified and directed by Engineer-in-Charge of following size-:

110mm dia of pipe

75mm dia of pipe

Supply & fix of UPVC junction single 'Tee' equal with door opening, ISI marked, IS-14735, jointed with solvent cement complete all as specified and directed by Engineer-in-Chargeof following sizes :-

110mm dia of pipe

75mm dia of pipe

Supply & fix of UPVC bend equal of any radius with door, ISI marked, IS-14735, jointed with solvent cement for 75mm size pipes complete all as specified and directed by Engineer-in-Charge..

Supply & fix of UPVC bend equal of any radius without door, ISI marked, IS-14735, jointed with solvent cement for 110mm size pipes complete all as specified and directed by Engineer-in-Charge..

Material & labour for 75mm thick cement concrete type C2 1:3:6 using 40mm graded stone aggregate as plinth protection finished even and smooth without using extra cement. etc complete all as specified and directed by Engineer-in-Charge.

Material & labour for Preparation of old treated surfaces of including brooming down, scrapping down smoke soots etc. and appying one coat of APEX Floor guard Emulsion paint complete all as specified and directed by Engineer-in-Charge

Cleaning and removing all scale and dirt etc from pvc water tank and from mouths of circulating pipes etc of capacity exc 250 litres and n.exc 500 litres including disconnecting and refixing all parts required to be disconnected for claening of tanks including mentioned date of cleaning complete all as specified and directed by Engineer-in-Charge.

Cleaning and removing all scale and dirt etc from pvc water tank and from mouths of circulating pipes etc of capacity exc 500 litres and n.exc 1000 litres including disconnecting and refixing all parts required to be disconnected for claening of tanks including mentioned date of cleaning complete all as specified and directed by Engineer-in-Charge.

Cleaning and removing all scale and dirt etc from pvc water tank and from mouths of circulating pipes etc of capacity exc 1000 litres and n.exc 2000 litres including disconnecting and refixing all parts required to be disconnected for claening of tanks including mentioned date of cleaning complete all as specified and directed by Engineer-in-Charge.

Supply & fix Ball valves 25mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe & fixed complete all as specified and directed by Engineer-in-Charge.. (min. weight 455gms)

Supply & fix Ball valves 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe & fixed complete all as specified and directed by Engineer-in-Charge. (min. weight 455gms)

Khodiyar Construction

Sanjay Enterprise