Supplying all materials, labours and T and P for installation, testing, commissioning of 24 (Twenty four) nos of solar energy based PWS with 5000 ltr capacity HDPE storage tank with a staging height of 3.00 mtrs. Including 5 (five) years O and M

Supplying and Fitting Solar pumping Machinery in Tube wells

Provision & Installation of 1 HP DC Solar Powered submersible pump (900 Wp) with Auto run & stop provision of stainless steel suitable for minimum 125mmx115mm bore well, dischage of 10000 litres per day from a total dynamic head of 60 mtrs as per MNRE specification with lowering, up to 57.00 msuitable dia HDPE pipe & 2.5 sq mmx 3 cor flat submersible cable of IS:694:1190 including mono/poly Crystaline PV array (900WP) mounted on indipendent steel structure of 3 mtr height in a suitable direction to optimize panel use and withstand the pressure up to 200Km/hr & suitable arrangements to operate Hand pump manually in the same bore well when there is no solar power with the help of special water chamber including 5 years warranty against defects in materials and workmanship with locking arrangement of switch board. The system should be ECO-friendly. Solar Pump should have remote monitoring device. (a) The PV Moduleas should be mounted on hot dio galvanized metallic structure of adequate stregth as per design and drawing given in Annexure - with fancing. (b) Components and part used in the solar pumping system including metallic structure(MS) should confirm to the BIS standards. (c) The rates of solar pumping system includes compressive maintaince contract for 5 years. During CMC period the contractor has to visit the instllation on quality basis and also on intimation of Defect from user. During CMC Contractor shall have to repair / replace the parts found deffective due to manufacturing defect free of cost. (d) Maximum shut off head 90 mtrs (e)Cable 2.5mmx3core as per IS 694 (f) Control panel suitable for above pump set with arrangement of dry run and over flow protection, sensor,float switch with necessarycable & rain preventive box etc and remote monitoring unit. (g) Lighting arrestor (h) Controller for sensor for over flow and dry run (i) Outlet from tube well to tank

Construction of RCC Foundation for Steel structure of tank staging Earth work in all kind of soil within 50 mtr initial lead lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr in depth as direction of Engineering in charge. (Per % cum ) levelling, ramming the foundation trenches removing roots of tress, shrubs all complete as per approved design, building specification and direction E/I (vide classification of soil item-B Foundation for Steel structure tank staging,

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150 mm thick with all leads and liftsincluding cost of all mateirals, labours, royality and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume)Foundation for Steel structure tank staging

Providing nominal mix PCC of (1:3:6) in foundation with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including screening shuttering mixing cement concrete in mixer and placing in position vibrating striking curing and royality all complete as per building specification and direction of E/I

Providing Cement (1:1 1/2:3) with 12 mm size broken hard granite chips for RCC works including hoisting and laying with cost, conveyance, royality of all materials to site (Per Cum )

Rigid and Smooth centering and shuttering for R.C.C. works including false works and dismantling them after casting including cost of materials complete in groung floor. R.C.C. floor, roof slab, landing, balconies, projecting sunshades and chajjas up to 4.3 mtr height (data for 9.0sqm) (per sqm) Foundation for steel structure staging

Column & Tie beam for Steel structure staging

M.S. Reinforcement of R.C.C works including cutting, bending, binding and lying grills and placing in position including cost of M.S Rods binding wire 18 to 20 gauge(Per Qntl )

Refilling of trenches in all kind of soil within 50 mtr initial lead and 1.5 mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineering-in-charge

Construction of galvanized square pipe Steel structure staging for HDPE water Storage Tank & Solar Panel For structure-Providing structure steel work in trusses other similar trussed purlins and members with bracing gusset plates etc as per detailed design and drawing or as directed by Engineer-in-charge including cutting fabrication hoisting erecting and fixing in position making reverted bolted welded connection including Galvanizing Charges

Providing & Laying of Rising Main, Delivery pipes and fitting & HDPE water storage tank Earth work in excavation in pipe line trenches all kind of soil within 50 mtr initial lead lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr in depth as direction of Engineering in charge.

Supplying all materials, labour T&P etc for laying in trenches the High DensityPolyethylene pipes and specials confirming to IS : 4984-1995 of following out side diameters and class-1 to class-4 and jointing by Fusion Welding method excluding eart work including jointing materials & jointing of PVC pipes and specials as per IS specification including testing of pipe line conveying pipes and specials as per IS specification including testing of pipe line conveying pipes and specials from store to work site etc. all complete per the direction of EIC. (32mm dia HDPE pipe PE:100 PN:10.0

Supplying all materials, labour T&P and filling with sand including watering ramming including cost, carriage and royality of all the materials etc al complete

Providing and fixing 32 mm dia (wt not less than 600 grams ) ISI Mark full way wheel valve approved quality as per specification and direction of E/I

Supplying all labour, T&P for Construction of four mouth stand posts & fittings, fixing of PVC pipes etc. complete

Providing and fixing HDPE container IS: 12701 one piece moulded water tank made out of low density polythyler and built corrugattion including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity 5000.00 litres

Carriage of materials from different sources to work site including loading, transportation, unloading and stacking the materials at work site etc. all complete job as per direction of E/I (L.S)

O & M for five years @ Rs. 5000/- per year