Up-gradation of Distribution Substation to Compact Secondary Substation

Material

STP SP 33 Pole (Galvanized)

11 KV XLPE cable 3C*300 sqmm

M.S. Channel 100*50 mm

M.S. Angle 65*65*6 mm

ACSR Rabbit Conductor

11KV Polymer Pin insulator with Pin

11KV Dics fitting R/W 45kN

11KV Polymer Disc insulator

Supply of 11/0.433kV 1000 KVA Compact Secondary Substation as per Technical Specifications

LT XLPE Alu Armoud cable 3.5*400 sqmm.

LT Air Bunch Cable 3*150+1*95 sqmm

Suspension & Dead End Clamp with mounting arrangement

Insulation Piercing Connector for 3x150 sqmm

HT Termination Kits-indoor- 3C*300 sqmm 11KV

HT Termination Kits-outdoor- 3C*300 sqmm 11 KV

3.5C*400 sqmm LT AL Lugs

Al LT Glands 48-63MM double compression for 400Sq MM Cable

Chemical Earthing incluiding Cooper bonded earthing road 3000 mm length and 20 mm dia and 25 kg 2 nos chemical bag

100mm Dia Gi Pipe For HT Cable termination from HT Pole to CSS

Pole Clamp For LT Cable mounting on Pole

MS nut &bolt off size

PP Holding Clamp with Nut & Bolt for SP-33

3 Ph. 4 w LT Distribution Box with Clamp and Nut bolt

Installation

Fabrication of MS Angle/Channel

Excavation of earth for pole pit of size .9x.6x1/6 of full length of pole for errection of pole in all type of soil including proper dressing of sides and ramming of bottom including getting out of the excavated soil and disposal of surplus excavated soil as directed complete work

i). SP-33 Pole (Single Pole)

Errection of following type of pole in proper level and alignment along with fixing of all accessories , top channel & clamp including CC Grouting of pole and making complete fitting of all acc. Complete

i). SP-33 Pole (Double Pole)

Grouting of pole in size 0.45x0.45x1/9 of support in cc ratio 1:4:8 block including cost of cement sand and stone blast back filling of soil and boulder in pit and ramming and proper alignment leveling

i). SP-33 Pole (Single Pole)

Dismentalling of gaurding from 11KV line

Dismentalling of old existing 11KV Rabbit conductor line

Dismmantling of Old & used 400KVA T/F from old existing plinth and opening of all connection at both ends i.e. HT/LT side with proper stacking at safe place

Dismmantling of Old & used 100KVA T/F from old existing plinth and opening of all connection at both ends i.e. HT/LT side with proper stacking at safe place

Dismentalling of Fuse set on double pole structure

Dismentalling of TPMO set from double pole structure

Safe Dismentalling of MCB Pannel set with LT PRMC complete with opening connection

Safe Dismentalling of ACB Pannel set complete with opening connection

Making of temp. SS Structure complete with all Supporting Work with Temp. fencing Protection For 400 kva & 100 KVA TF During The CSS Errection Work And Dismental After Completion of work.

Head load cartage of 400 KVA TF from Old place to new installation place site to road site avg distance 0-1Km

Head load cartage of 100 KVA TF from Old place to new installation place site to road site avg distance 0-1Km

Cartage of old & used 400 KVA T/F from old place work site to new installation site with loading and unloading at both ends and proper stacking (0-20Km.)

Cartage of old & used 100 KVA T/F from old place work site to new installation site with loading and unloading at both ends and proper stacking (0-20Km.)

Installation of new/repaired 400 KVA T/F on temp arrangement station with complete fitting of all accessories and making all connection at both ends HT/LT complete in all respect

Installation of new/repaired 100 KVA T/F on temp arrangement station with complete fitting of all accessories and making all connection at both ends HT/LT complete in all respect

Mounting & Fixing of Fuse set on DP structure including connection with all complete work

Mounting & Fixing of ACB/MCB structure including connection with all complete work at new location

Laying of LT XLPE cable 1x400 Sq.mm. from pole to Meter cubical box making all connection complete

Laying of LT XLPE cable 1x120 Sq.mm. from pole to Meter cubical box making all connection complete

Laying, stringing & Re-sagging of ACSR Rabbit conductor in 11KV Line 3P4W

Resagging of Guarding of 11KV line complete

Dismantle of old transformer plinth & Fencing and remove all garbage material From work site to dumping site with all spporting work for Erection of CSS Plinth. Foundation

Erection of CSS Plinth of CC/ MS Struction as per site requirement , Including color wash on Plinth or MS Structure

Erection ,providing And Fixing of wire mesh of size 50x30mm around plinth and toe wall duly welded with frame of MS angle Iron 35x35x6 mm and strip of size 35x6 mm in mid of eac side along with wire mesh, with the height of 0.5 mtr above the plinth and 2 mtr. above the toe wall with 2 No. Gate(HT/LT Side) with locking arrangement. in the toe wall size including frouting 6 no. legs in ratio in block of size 0.25x0.25x0.45mtr. including gravlling of single of size 20 to 40 mm anf complete painting of wire mesh with Two coat Al. Paint(including all material rate)

Erection & Commissioning of 11/0.433kV 1000 KVA Compact Secondary Substation as per Technical Specifications

Erection & Commissioning of 11 KV 3C x 300 sqmm XLPE Armoured cable

Erection & Commissioning of LT XLPE Alu Armoud cable 3.5 x 400 sqmm.

Erection of LT Air Bunch Cable 3x150+1x95sqmm

Erection of Suspension & Dead End Clamp with mounting arrangement

Erection of Insulation Piercing Connector

Erection and Insulation of 3 Ph 4W LT Distribution Box

Disconnection and reconnection of consumer service cable Single & Three phase

Erection & Commissioning of HT Termination Kits-indoor- 3C X 300sqmm 11KV

Erection & Commissioning of HT Termination Kits-outdoor 3CX300sqmm 11 KV

Erection & Commissioning of 3.5C X 400 sqmm LT AL Lugs

Erection & Commissioning of 48-63MM double compression Al LT Glands for 400Sq MM Cable

Erection & Commissioning of Chemical Earthing incluiding Coper bonded earthing road 3000 mm length and 20 mm dia and 25 kg 2 nos chemical bag

Erection of 100mm Dia Gi Pipe For HT Cable termination from HT Pole to CSS

Erection Pole Clamp For LT Cable mounting on Pole

Providing and Fixing of Danger Board

Painting of SP-33 Pole Structure Complete with all MS Fitting

Safe Cartage of all material from store site to work site (excluding CSS TF)

Dismantling

Dismantaling of Conductor with Opening Jumpering Binding Then Bundling Complete.

Dismantaling/cutting of Double Pole structure rail pole

Dismantaling of DTR 400 KVA from temp SS

Dismantaling of DTR 100 KVA temp SS

Dismantaling of ACB/MCB panel temp SS

Safe Back Cartage of all Dismantaled DTR 400KVA from work site to Store centre Rishikesh/JE store with loading and unloading at both ends (dist aprox 0-20km)

Safe Back Cartage of all Dismantaled DTR 100KVA from work site to Store centre Rishikesh/JE store with loading and unloading at both ends (dist aprox 0-20km)

Safe Back Cartage of all Dismantale, MS maltable scrap from road site to Store centre Rishikesh with loading and unloading at both ends (dist aprox 0-20km)

GST EXTRA

Composite Engineers

Creative Entrepreneurs LLP