Restoration of rain damages on Gandhi Park to Kala Pul road km 0/000 to 2/000 in Tehsil Dharamshala, Distt. Kangra H.P. Under PDNA-2025

Providing laying spreading and compacting graded stone aggregate to size 45mm to 22.4mm ( forty five millimetre to twenty two point four millimetre) wet mix macadam specification including premixing the material with water at OMC in mechanicaly mix plant carriage of mixed material by tipper to site laying in uniform layers with paver in sub base/ base course on well prepared surface and compacting with rolling with three wheel 80-100 K.N. (eight to one hundred) weight to achive the desired density including lighting barricading and maintenance of diversion etc. as per table 400.11 and 400.12 and technical specification clasue 406 and as per direction of Engineer-Incharge including carriage of materials within all leads and lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government. But excluding GST.

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kgs (Zero twenty five into Zero decimal to three Zero kilogram) per square metre on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. as per direction of Engineer-Incharge including carriage of materials within all leads and lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government. But excluding GST.

Providing and laying 30mm (Thirty milimetres) thick bituminous concrete with 100-120 TPH batch type HMP (Hot Mix Plant) producing an average output of 75 tonnes (Seventy five) tonne per hour using crushed aggregates of specified grading, premixed with bituminous binder VG-10 (Viscosity grade-Ten) @ 5.4% to 5.6% (Five point Four to Five point Six) percent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 509 complete in all respect and as per direction of Engineer-Incharge including carriage of materials within all leads and lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government.But excluding GST.

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes, as per direction of Engineer-Incharge including carriage of materials within all leads and lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government. But excluding GST.