Establishment of Emergency Operations Room at Mini Secretariat Ganderbal.

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar all complete.

Removing motar from bricks and cleaningh bricks including stacking within a lead of 50 Mtr. (Stacks of cleaned bricks shall be measured) from brick work in cement motar incl. all complete.

Labour for available Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) incl. all complete.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) including Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level complete.

Supply & laying of GSB under floors in trenches, plinth, sides of foundations etc consolidating each layer by ramming ,watering, compacting, all inclusive leads, lifts, loading, un-loading, cost and carriage of material all complete.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) all complete.

Providing and fixing of 8mm laminated wood flooring AC3 Grade, laid over 2mm thick foam sheets incl. all necessary screws, fittings, fixtures, beadings incl. all carriages as per directions of EIC complete.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of specialsections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x40mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts & bolts of required size and other end of angle hanger fixed with G.I. channels 45x15x0.9 mm running at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diaX230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre, with 25mm long drive-all screws @ 230 mm interval ,including fixing of gypsum board/calcium silicate board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the gypsum board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers’ specification and also including the cost of making openings for light fittings, grills diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum moisture resistant board

Granular Textured paint ready mixed, acrylic based or resh based decorative and protective coating formulated with graded mineral aggregates to provide a durable textured finish on interior or exterior wall surfaces as per directions of EIC all complete.

12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand) incl. all complete.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 2 mm thick .

Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work including Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface all complete.

P/F of 18mm ply including necessary nails, fixtures, adhesives, fittings incl. all head load and carraiges etc all complete as required at site all as per directions of EIC complete.

Providing and fixing of Klin dried wood in frames and partations necessary nails, fixtures, adhesives, fittings incl. all head load and carraiges etc all complete as required at site all as per directions of EIC complete.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Kiln seasoned and chemically treated hollock wood

Providing and fixing 35mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). Second kail wood

Providing and fixing 35mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class Kail wood

Proviidng and fixing of 3.5mm thick glass panes of approved brand and manufacture inclusing all necessary beading, nails and other fittings/fixtures complete.

Providing and fivxing of Aluminium Hardware iteams of approvewd brand and make (superior quality) including necessary fittings/fixtures complete:-

T-Bolt

Handles 4"

Air Hooks

Providing and fixing of electric points Lighting Point (one lightng point includes wiring of lighting point in 1.5sq.mm PVC insulated copper wite and 2.5mmsq.mm PVC insulated multistandard copper wire, 6 Amp one way switch, 6 Amp Spole MCB, 10Amp DP MCB, 2 way DB MCB and hylem sheet with 16/15 watt LED surface lights, including cost of channels as per requirement. One Point controlled by one 6 Amp switch. (upto 10 meters) including Placing and fixing in position 25mm PVC conduit pipes/ Channels with necessary bends and other fittings including Switches complete as per the directions of Incharge Engineer.

Heating point ( One heating point ) including wiring of lighting pointin 2.5Sq.mm PVC insulated copper wire and 4.00 Sq.mm PVC insulated Multistrand copper wire, 16 Amp one way switch, 10 Amp S pole MCB, Two way DB MCB and hylem sheet including placing and fixing in position deep junction of cast iron with network . Conduit pipes with necessary fittings in RCC work incl. switches all complete as per the directions of Incharge Engineer.

Providing and fixing of one fan point including wiring for lighting points in 1.5 Sq.mm PVC insulated copper wire and 2.5Sq.mm PVC in multistrand copper wire 1200mm ceiling fan Electronic fan dimmer, 6 Amp S pole MCB, 10 Amp DP MCB, 2 Way DB for Housing MCB or Lighting Circuits and hylem sheets including placing and fixing in position fan clamp boxes with MS Fan clamps connected with network conduit pipes with necessary fittings in RCC work incl. switches allcomplete as per the directions of Incharge Engineer.

Providing/ fixing of Led lights of standard make ( Havelles, Anchor, Philipas or equivalent) all complete

18 watt LED lights

Modular Boards (Details be provided at the time of payment)

18" exahust Fans

Carriage of materials from approved source to site of work:- Sand/ stone aggregate for an average lead of 10Kms.

Bricks for an average lead of 40 Kms.