SPECIAL REPAIRS REPLACEMENT OF STREET LIGHTS PANELS WITH TIMERS

Amount

S&F 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections twin core cable flat or circular stranded of size 10 Sqmm including taking down old un-serviceable cable complete all as specified and as directed.

Supply, laying in repair and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sqmm 4 core including necessary arrangement for fixing on wall, roof etc by using clamps, screws, porcelain insulators, laying in trenches etc including taking down old un-serviceable cable complete all as specified and directed

Supply, laying in repair and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50 sqmm 3.5 core including necessary arrangement for fixing on wall, roof etc by using clamps, screws, porcelain insulators, laying in trenches etc including taking down old un-serviceable cable complete all as specified and directed

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in soft/loose soil/sand including taking out unserviceable LT Cable for laying of new cable. Note:-The labour element for raising / taking out of cable / pipe shall be included in relevant items of S&F cables.

Returning, filling-in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick each, in soft /loose soil complete all as specified.

Supply and spread dry river sand for cushioning and covering of UG cables in trenches all as specified and directed. Note:- only punned thickness shall be measured and paid.

Supply and laying common burnt bricks, sub class 'B', of size 230 x 115 x 75 mm laid dry and abutting each other with gap between adjacent slab not exceeding 10mm over under ground cable for cable protection in trenches all as specified and directed.

Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Dismantling / taking down LED/ FTL/CFL light fitting of any wattage and type street light / security lights of any capacity & description from existing LT pole/walls, at any height and refixing the fittings in existing / another location after repair work or carrying to credit complete all as specified and as directed. Note:- (i) Replacement of defective parts accessories shall be measured and paid separately under relevant item of Sch 'A' as supply and fix in repair. (ii) T&P i.e. Ladder, spanners or any other equipment required and Transport charges for repair of street light shall be provided by Contractor and cost for the same shall be deemed to be included in the quoted rate of respective items of Sch 'A'.

Supply & fix in repair LED Driver of 48 Watt of make and model as per existing LED 48 Watt Street light fitting. Make: Havells/ Crompton / Bajaj

Supply & fix in repair LED Driver of 25 Watt of make and model as per existing LED 25 Watt Street light fitting. Make: Havells/ Crompton / Bajaj

S&F in repair for street light brackets made of 40 mm dia GI Pipe light grade in shape / angle as required and including suitable size of reducer to fix the LED street light of capacity 25/40W not exceeding 1.5 mtrs in length fixed to pole with suitable size of MS flat iron clamps 2 Nos, MS nut & bolt with cup washers including dismantling old rusted/unserviceable bracket with its rusted clamps and nut bolts complete all as specified and as directed.

M&L for repair of XLPE cable upto 25 Sqmm by disconnecting the cable from loop in loop out box, cutting the worn-out insulated cable, removing the loop from the ground and re-preparing the cable for thimbling by using proper tools and re-connect the cable at Junction box by using nuts and bolts of suitable size as existing (street light) and closing the box properly as previous complete all as specified and directed Note : Nuts & bolts and PVC cable gland, thimble & insulation tape required for connection and making good deemed to be included in quoted rate.

S&F Automatic Street Light Control panel out door made out of CRCA Sheet of 3.15 mm thick with powder coated painting frame suitable size and the space between ground to street light control panel should be 60 cm with PCC foundation for street light control Panel, control panel should be provided with necessary locking arrangement, danger notice sticker, provn of cable entry and exit arrangement for Al cable size upto 120 Sqmm and glands, thimbling for connection of cable to MCBs/MCCBs/bus bar etc internal wiring with FRLS copper wires of suitable size and three indicator lights, LED Multifunctional Panel meter to measure voltage and current with all connected CTs, suitable size of bus bar and control accessories i.e Three Phase, 5 KW using Infrared Sensor based NATURE SWITCH for automatic switching of Street Lights, 3 Nos Contactors, 3 Nos Incoming MCBs & 3 Nos Outgoing MCBs of 16-20 Amps each & Circuit wiring (Copper) of suitable size. Nature Switch operation should be based on Natural Light Lux level. Required Illuminance Level for Switching ON is ≤ 30 Lux and for Switching OFF ≥ 10 Lux. The Sensor should also have part night operation facility of min. 4 hrs. to max. 12 hrs. The Sensor along with suitable Power Contactor(s) and Incoming-Outgoing MCBs should be enclosed in control panel. The circuit should also have provision for Manual Operation (i.e. Sensor By-Pass option) with necessary clamps, and connecting to existing XLPE Cables by providing proper size of glands and thimbles (lugs) complete all as specified and as directed. Make:- (a) Swadeep, Model: -02EC-5kW3P or as approved by Accepting officer (b) Nature Switch - Kakatiya Energy Systems/BAJAJ/Healer, (c) MCB's & Contactors - BCH/L&T/Schneider / Havells Note:- Contractor shall submit drawing of control panel clearly indicating the layout and specification before fabricating the same for approval of Accepting Officer. The Panel shall be manufactured by any CPRI approved manufacturer.

Supply and fixing in replacement LED street light fitting with and including individual high power not less than 45 watt LED new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium with secondary optics, suitable for outdoor use IP 66, connected with connecting cable complete all as specified and as directed

Supply and fixing in replacement LED street light fitting with and including individual high power not less than 25 watt LED new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium with secondary optics, suitable for outdoor use IP 66, connected with connecting cable complete all as specified and as directed

S&F in replacement of Flood light of any wattage and type with LED Flood light of 150 Watt Symmetrical illumination, along with Driver assembly as per OEM Specifications, Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP66 flood light and connecting up existing cable complete all as specified and as directed. Make:- Havells, Model- JETAIRISFLS150WLED757PSYMLTG or its equivalent model from other manufacturers given in the list of manufacturer.

S&F in replacement of existing loop in-out junction box with non metallic FRP junction box suitable of size (Appx 350 x 250 x 150) with connector 4 way and including one MCB SP 6 A, 230V along with 2 Nos 'C' Clamps and back clamp made up of 20x3 flat iron and fixing on pole with necessary nuts bolts, washers, 2 Nos PVC cable glands of size not exc 4 core 25 sqmm, Cable lugs as required complete all as specified and as directed. Make : Sintex or Equivalent

BEEGEE DESIGN SYSTEMS

K VENUGOPALA SWAMY

G V N R CONSTRUCTIONS

Bismi Engineering