Rate Contract for Blasting Surface Cleaning, Priming and Painting of Outside Hull, Internal Tanks ,Superstructure, Decks and Pipes of Vessels under Repairs.

Amount

Copper slag blasting SA 2 ½ Standard including removal of slag from the blasted areas onboard vessels

Copper slag blasting SA 2.0 Standard including removal of slag from the blasted areas onboard vessels

Copper slag hard sweep blasting SA 1.0 Standard including removal of slag from the blasted areas

Copper slag blasting SA 2 ½ Standard including removal of slag from the blasted areas on loose plates

Application of epoxy primer/paint onboard by air less spray ( per coat)

Application of epoxy primer/paint on loose plates by air less spray ( per coat)

Application of Non skid epoxy paint onboard by air less spray/roller ( per coat) i.e. including nonskid aggregate

Application of epoxy primer/paint inside tanks onboard vessel by air less spray ( per coat) including stripe coats

Grit blasting SA 2 ½ Standard including removal of grit from the blasted areas

Chipping for hopper area for Dredgers

Copper slag blasting SA 2 ½ Standard of anchor chain up to 30mm Dia per RMT including swivel adaptors

Application of epoxy primer/paint on anchor chain upto 30mm Dia by airless spray

Anchor blasting SA 2 ½ Standard and painting (for chain dia upto 30 mm dia)

Copper slag blasting SA 2 ½ Standard of anchor chain up to 31-50mm Dia per RMT including swivel adaptors

Application of epoxy primer/paint on anchor chain upto 31-50mm Dia by airless spray

Anchor blasting SA 2 ½ Standard and painting (for chain dia upto 31-50 mm dia)

Application of epoxy primer/paint on anchor chain upto 51-70mm Dia by airless spray

Anchor blasting SA 2 ½ Standard and painting (for chain dia upto 51-70 mm dia)

Copper slag blasting SA 2 ½ Standard of anchor chain above 70mm Dia per RMT including swivel adaptors

Application of epoxy primer/paint on anchor chain above 70mm Dia by airless spray

Anchor blasting SA 2 ½ Standard and painting (for chain dia above 70mm dia)

Copper slag blasting SA 2 ½ Standard of various pipes (Diameter of Pipe up to 100 mm per RMT) on outer surface area.

Copper slag blasting SA 2 ½ Standard of various pipes (Diameter of Pipe 101 to 200 mm per RMT) on outer surface area.

Copper slag blasting SA 2 ½ Standard of various pipes (Diameter of Pipe 201 to 300 mm per RMT) on outer surface area.

Copper slag blasting SA 2 ½ Standard of various pipes (Diameter of Pipe 301 to 400 mm per RMT) on outer surface area.

Copper slag blasting SA 2 ½ Standard of various pipes (Diameter of Pipe 401 to 500 mm per RMT) on outer surface area.

Copper slag blasting SA 2 ½ Standard of various pipes (Diameter of Pipe 501 to 600 mm per RMT) on outer surface area.

Application of epoxy primer/paint various pipes (Diameter of Pipe in mm per RMT) on outer surface area.

Low pressure water jet cleaning (to remove all contaminants, all stains, oil, etc. before application of scheme painting) with contractor jet machines.

Painting of all Markings (Eg: Draught marks,Plimsol marks(P&S)/IMO Number, ship’s name, port of registry on bow & stem in English & Hindi, Bow thrust emblem, pendent/pennant number marking, tank boundaries,etc.)

Line cutting between boot top and top side

Helo deck Marking with Florescent paint with two coats of orange,green,red,white and lemon yellow

VOYAGER MARINE SERVICES INDIA PRIVATE LIMITED

SIRICON ENGINEERS AND CONTRACTORS